search for: 3510

Hi there Is it fair to compare the 2 solutions using Solaris 10 U2 and a commercial database (SAP SD scenario). The cache on the HW raid helps, and the CPU load is less... but the solution costs more and you _might_ not need the performance of the HW RAID. Has anybody with access to these units done a benchmark comparing the performance (and with the pricelist in hand) came to a conclusion.

Hi folks, Myself and a colleague are currently involved in a prototyping exercise to evaluate ZFS against our current filesystem. We are looking at the best way to arrange the disks in a 3510 storage array. We have been testing with the 12 disks on the 3510 exported as "nraid" logical devices. We then configured a single ZFS pool on top of this, using two raid-z arrays. We are getting some OK numbers this way, but it seems a waste of the resources on the 3510 if we are handi...

hi all, I am hoping to move roughly 1TB of maildir format email to ZFS, but I am unsure of what the most appropriate disk configuration on a 3510 would be. based on the desired level of redundancy and usable space, my thought was to create a pool consisting of 2x RAID-Z vdevs (either double parity, or single parity with two hot-spares). using 300GB drives this would give roughly 2.4TB of usable space. I am presuming I will want the RAID mo...

...device automatically transforms into a two-way mirror of device and new_device. But, this isn''t what I''m seeing . . . did I do something wrong? Here''s the format output for the disks: <pre> 4. c8t600C0FF00000000007E4BE2BEDBC9600d0 &lt;SUN-StorEdge 3510-421F-545.91GB&gt; /scsi_vhci/ssd at g600c0ff00000000007e4be2bedbc9600 5. c8t600C0FF00000000007E4BE4C38F4ED00d0 &lt;SUN-StorEdge 3510-421F-545.91GB&gt; /scsi_vhci/ssd at g600c0ff00000000007e4be4c38f4ed00 6. c8t600C0FF00000000008266812A0877700d0 &lt;S...

We are running Solaris 10 11/06 on a Sun V240 with 2 CPUS and 8 GB of memory. This V240 is attached to a 3510 FC that has 12 x 300 GB disks. The 3510 is configured as HW RAID 5 with 10 disks and 2 spares and it''s exported to the V240 as a single LUN. We create iso images of our product in the following way (high-level): # mkfile 3g /isoimages/myiso # lofiadm -a /isoimages/myiso /dev/lofi/1 # new...

...pe someone can help me, I cannot seem to get a system's ethernet interface to correctly work in promiscuous mode... I have a Centos 6.4 system with 2 bnx2 interfaces on it. I have set up eth1 in promiscuous mode and am sending traffic to it using the port mirroring configuration on a Nortel 3510-24T switch. The switch reports that it is sending a fair amount of traffic to the mirror port. However, within Centos 6.4, I only see broadcast traffic from the switch: [root at host eth1]# ifconfig eth1 eth1 Link encap:Ethernet HWaddr 00:19:B9:E2:30:AE UP BROADCAST RUNNING PRO...

Hello zfs-discuss, Relatively low traffic to the pool but sync takes too long to complete and other operations are also not that fast. Disks are on 3510 array. zil_disable=1. bash-3.00# ptime sync real 1:21.569 user 0.001 sys 0.027 During sync zpool iostat and vmstat look like: f3-1 504G 720G 370 859 995K 10.2M misc 20.6M 52.0G 0 0 0 0 ---------- ----- ----- ----- ----- --...

...to go reasonably well amazingly enough. Reads are a disaster as we might expect. To complicate things, writes are coming in over NFS. Reads may be local or may be via NFS and may be random. Once written, data is not changed until removed. No Z RAID''ing is used. The storage device is a 3510 FC array with 5+1 RAID5 in hardware. I would like to triage this if possible. Would changing the recordsize to something much smaller like 8k and tuning down vdev_cache to something like 8k be of initial benefit (S10U4)? Any other ideas gratefully accepted. bill This message posted from ope...

Hey All, I've been using rsync (2.6.9) to migrate a 90g message store volume and I'm running into some interesting results. I have two FC storage arrays attached to a Sunfire V280R, running Solaris 8. My 100gig volume is on a Sun StoreEdge 3510, and my new 500gig partition is on an HP EVA. I used the syntax: rsync -a --stats --delete $SRC/$dir/ $DST/$dir At present time, the destination volume is 2.5 times the size of the original volume. My first thought was this may be a drive geometry issue, and I've been working with Sun t...

...NO3 NO2 NH4 3504 630.0000 33.00 0.001 0.01 3505 NA 26.66 <NA> <NA> 3506 NA 0.72 <NA> <NA> 3507 NA NA <NA> <NA> 3508 NA NA <NA> <NA> 3509 NA NA <NA> <NA> 3510 1210.0000 14.00 0.001 0.01 3511 1265.0000 12.00 0.001 0.01 3512 1400.0000 14.00 0.001 0.01 3513 1427.0000 12.00 0.001 0.01 3514 1410.0000 7.00 0 0 3515 1520.0000 8.00 0.001 0.01 3516 1470.0000 7.60 0 0 3517 1170.0000 10.00 0.001 0.01 3518 4570.0000...

Hi, I want to share a partition of an external disk between 3 machines. It is located on a Sun StoreTek 3510 and bound (via multipathing) to all 3 machines. One machine (say mach1) is the node I used to create the filesystem and setup /etc/ocfs2/cluster.conf. I copied the file to the other 2 machines. All use the same /etc/multipath.conf[1], too. All start /etc/init.d/ocfs2 at boot, all are running with...

...t72.xml -rw-------. 1 root root 3853 Jun 14 2016 dcos-bp.xml -rw-------. 1 root root 3551 Mar 21 2015 fbsd100.xml -rw-------. 1 root root 3273 Mar 23 2015 fbsd101.xml -rw-------. 1 root root 3867 Feb 21 2015 fedora20.xml drwx------. 3 root root 4096 May 10 18:08 networks -rw-------. 1 root root 3510 Oct 11 2015 u1404s.xml -rw-------. 1 root root 5017 Oct 11 2015 u1404.xml -rw-------. 1 root root 3507 Jun 5 19:33 wheezy.xml -rw-------. 1 root root 3489 Feb 21 2015 win7.xml # lvs LV VG Attr LSize Pool Origin Data% Meta% Move Log Cpy%Sync Convert [deleted]...

Hi, we had a server that lost connection to fiber attached disk array where data luns were housed, due to 3510 power fault. After connection restored alot of the zpool status had these permanent errors listed as per below. I check the files in question and as far as I could see they were present and ok. I ran a zpool scrub against other zpools and they came back with no errors and the list of permanent erro...

...ity ??? ??? dovecot-uidvalidity.5b4a79b5 ??? ??? .Drafts ??? ??? ??? cur ??? ??? ??? dovecot.index.log ??? ??? ??? dovecot-uidlist ??? ??? ??? maildirfolder ??? ??? ??? new ??? ??? ??? tmp ??? ??? maildirsize ??? ??? new ??? ??? .Sent ??? ??? ??? cur ??? ??? ??? ??? 1531611855.M403833P418688.mail,S=3510,W=3623:2,S ??? ??? ??? ??? 1531624037.M238133P535494.mail,S=436,W=451:2,S ??? ??? ??? dovecot.index.cache ??? ??? ??? dovecot.index.log ??? ??? ??? dovecot-uidlist ??? ??? ??? maildirfolder ??? ??? ??? new ??? ??? ??? tmp ??? ??? .Sent Messages ??? ??? ??? cur ??? ??? ??? dovecot.index.log ??? ???...

I'm currently looking to interconnect my Asterisk PBX system with the PSTN via a digital PRI/T1. I know a multitude of options exist for internal PCI cards (Digium/Sangoma/Rhino), I was wondering if anyone has any experience or recommendations of external PRI media gateways that support SIP. So far I've found: VegaStream Vega 400 Audiocodes Mediant 2000 MediaTrix 1531 However they are

Hi all, I know Asterisk is able to send a waiting message (audio) to people trying to call a busy user agent using a queue. However, I'd like to change this audio message to a text message to be able to print it on screen on the other end. Is it possible to configure Asterisk to have text message sent ? Thanks, -- Anthony Chapellier --------- MBDSYS SARL 1, centre commercial de la Tour

...net command reads the smb.conf whether or not the daemons smbd or nmbd is running. Errors in the config file will cause the net commands to fail. It took me a long time to experiment and find this out but I thought I should pass it on. -- Kent nasve525@regis.edu kent@wareham.k12.ma.us W 508 291-3510 X122 C 508 317-2755 Tips:----------------------------------------------> "OpenOffice.org ... Stops Word macro viruses DEAD!" "Postgresql.org ... Don't 'kill -9' the postmaster" "Technology is legislation - C. Einfeldt on OO.o discuss list"

...ted to be taken in reliance of this message or > attachments is prohibited. You can read our Privacy Policy here: > www.asbbank.co.nz/privacystatement.stm > ______________________________________________________________________ -- Kent nasve525@regis.edu kent@wareham.k12.ma.us W 508 291-3510 X122 C 508 317-2755 Tips:----------------------------------------------> "OpenOffice.org ... Stops Word macro viruses DEAD!" "Postgresql.org ... Don't 'kill -9' the postmaster" "Technology is legislation - C. Einfeldt on OO.o discuss list"

...er that logs in with a valid login name in LDAP will be able to login on this machine.The machine must authenticate first prior to the user. Anyone have this problem before. Could use some insite into where to look to fix this problem. -- Kent nasve525@regis.edu kent@wareham.k12.ma.us W 508 291-3510 X122 C 508 317-2755 Tips:----------------------------------------------> "OpenOffice.org ... Stops Word macro viruses DEAD!" "Postgresql.org ... Don't 'kill -9' the postmaster" "Technology is legislation - C. Einfeldt on OO.o discuss list"

Good Morning, Environment :openchange / samba4 ,ubuntu 12.04, 32bit CLI: make samba-git-update fails with:- [3509/3720] Linking default/source4/heimdal_build/samba4kpasswd [3510/3720] Linking default/source3/smbd/smbd default/lib/tevent/testsuite_1.o: In function `test_event_context_threaded': /home/sysop/openchange/samba4/bin/../lib/tevent/testsuite.c:246: undefined reference to `tevent_set_trace_callback' collect2: ld returned 1 exit status default/source3/libsmb...