search for: 3000+

Using below configuration multiplied by 3000+ nodes to control bandwidth causes very high kernel cpu usage (99.5%) narrowed it down to the mangle table. Any ideas to do this more efficiently would be appreciated. The mangle table entry (indicated by ***) is sucking all the cpu. I am running RH7.3 kernel 2.4.18-3 and iptables 1.2.5 This setu...

Hi guys and girls, A client of mine is seriously investigating migrating their 7 NT servers and 3000+ users to Linux running Samba. I've read one or two documents so far about the migration, but I'm still a little unclear about a number of things. When you have a chance I'd really appreciate your guidance on the following items. 1.) LDAP, /etc/passwd or MySQL backend (if supported). 2...

I want to buy a new server to run Asterisk and after looking at prices for the Athlon XP 3000+ it costs the same as an Athlon 64 at the same speed rating. I was wondering if Zaptel/Asterisk will compile/work on an Athlon 64? -- Carlos Chavez Director de Tecnolog?a Telecomunicaciones Abiertas de M?xico S.A. de C.V.

...it at the time, but there's a chance it may be a 64bit board and cpu. I don't want to pull the machine out of the desk, and open it up to find out. Is there a command entered by way of the terminal window that will tell me what kind of cpu I have? I want to say that it's an AMD sempron 3000+, but I'm not sure. Thanks Jim

I'm new to R (previously used SAS primarily) and I have a genetics data frame consisting of genotypes for each of 300+ subjects (ID1, ID2, ID3, ...) at 3000+ genetic locations (SNP1, SNP2, SNP3...). A small subset of the data is shown below: SNP_ID SNP1 SNP2 SNP3 SNP4 Maj_Allele C G C A Min_Allele T A T G ID1 CC GG CT AA ID2 CC GG CC AA ID3 CC GG nc AA ID4 _ _ _ _ ID5 CC GG CC AA ID6 CC...

Hi there, I'm trying to repurpose an unused machine (athlon XP 3000+) for my young daughter to use. It's on a motherboard with a VIA KT880 chipset and VIA integrated soundcard (VIA 8237). The card seems to be detected during boot time and shows up in the system log, but when I try to actually use the sound card within Gnome, there's no sound. The dev...

...ot Linux, load zaptel, wcfxo, and wcfxs, and then run System Monitor, the CPU utilization spikes to 60% every 10 seconds. After I remove wcfxs the spikes stop, and system utilization stays at 0%. I have two TDM22B cards and get these spikes with either card in the system. This is an Athlon-64 3000+ CPU and Fedora Core 2. zaptel-1.0.2. Is there anyone who has a TDM card on a "quiet" system who can run System Monitor and observe CPU utilization? Thanks for your help. P.S. I do 'hdparm -u1 /dev/hdx' on the disks. -- Michael Welter Introspect Telephony Corp. Denver, Co...

...lanning a new home file server on a gigabit network that will be utilizing ZFS (on SXDE). The files will be shared via samba as I have a mixed OS environment. The controller card I will be using is the SuperMicro SAT2-MV8 133MHz PCI-X card. I have two options for CPUs/motherboards: AMD Athlon64 3000+ (64 bit) DFI LanParty UT 250gb (NForce 3 based) motherboard 32 bit PCI slots only 2GB RAM or Dual Intel Xeon 1.6GHz CPUs (32 bit) ASUS PCH-DL motherboard PCI-X slots @ 66MHz 2GB RAM I am trying to figure out where my bottleneck will be for file transfers. Will it be the controller card running...

...ord: 0242A7FEC5CD294F916925766089E573 when I configured samba with ldap backend then samba is not able to get user information (because samba always search attribute uid=numeric), but when I replace uid=username (uid=test1 instead of uid=102220) it works and authenticate successful. As I have 3000+ users in ldap and it is not possible to change to all user settings, request to you kindly give me some clue to find out the solution, I will highly obliged for the same. -- Thanks & Regards, Arun Kumar Gupta ------------------------------------------------------------------------------...

Hi I would like to ask you which processor is beter solution for router? Please shortly explain why? I have about 800 users. For each I create 2 htb classes and 4 filters. Moreower router have dhcp serwer and lots of iptables rules. I''m interested in P4 3Ghz HT and AMD Athlon 64 3000+. What is beter choice for my needs? What parametrs of processors are important: clock, cache, fsb or something else ? Thanks in advance Pozdrawiam Szymon Turkiewicz ---------------------------------------------------------------------- Jestes kierowca? To poczytaj! >>> http://link.in...

I have only one box[1] running 3 sub-systems[2] at my system, are these numbers resonsable[3]?? [1] - From dmesg (FreeBSD 6.1-RELEASE): AMD Sempron(tm) Processor 3000+ (1808.33-MHz K8-class CPU) real memory = 2080309248 (1983 MB) avail memory = 1997869056 (1905 MB) ad0: 76350MB <SAMSUNG SP0802N TK200-04> at ata0-master UDMA33 [2] The sub-systems are: 1 - A server giving adreesses of documents to be indexed 2 - A server receiving these documents and repla...

Hello All, I have a request from a prospectieve client to deploy a PBX capacity that can do up to 3000+ lines within a geographic region similar to a campus. The client wants analog lines for extensions and maybe VoIP for some backhaul traffic while the other traffic would be carrid via E1 channels. The client has other proposals to buy a mid, range telco switch from alcatel or simens but i am tryin...

...00000% 99.987793% 99.975586% 99.816895% 99.816895% 100.000000% 100.000000% 99.975586% 99.975586% 99.987793% 100.000000% 100.000000% 99.987793% 99.975586% 100.000000% 99.975586% --- Results after 136 passes --- Best: 100.000000 -- Worst: 99.694824 -- Average: 99.951973 HW: Tyan Tomcat K8E, Athlon64 3000+, 1GB RAM, 3ware 8006, 2x Maxtor HDD SW: Ubuntu 5.10, linux-2.6.15, zaptel from 1.2 branch Any idea what can be wrong? Thanks in advance, Tamas

I have a new K8MM motherboard AMD x86_64 3000+ with the S3 unichrome chipset. The default xorg.conf used vesa driver whichs gives 800x600. I tried to change the driver to via and the x log file says via not found. Is something missing in x86_64 or did I miss something? Jerry

...sip show peers output. [Dec 21 03:38:31] NOTICE[12693]: utils.c:1074 ast_wait_for_output: Timed out trying to write This happens on a freshly installed 1.6.1.12 and a 1.6.1.6 box that I am running. Both of them use Debian Linux (lenny) on Dell PowerEdge 1950. My list of SIP peers is quite large (3000+). I have not noticed anything wrong with the asterisk installation apart from this notice, but it is worrying as the error seems to crop up in other bug reports as a precursor to crashes.

...mory (PC3200 ECC nonbuffered) quickly. Thus, if you happen to have available some of this type of memory that you could spare with and get to me quickly, I would really, *really* appreciate it. I would really like to have either 4x512 MB or 2x1 GB in this box. The new hardware is an Athlon 64 3000+ and an Asus A8N-VM CSN motherboard, in case someone is curious. -hpa P.S. The new case (cannibalized from another server donated to me by Penguin computing for RAID-6 testing) has additional slots, so I am also looking to add a couple of WD 3200JD drives to use as backup media.

I have a fairly large model: > length(Y) [1] 3051 > dim(covariates) [1] 3051 211 All of these 211 covariates need to be nested hierarchically within a grouping "class", of which there are 8. I have an accessory vector, " cov2class" that specifies the mapping between covariates and the 8 classes. Now, I understand I can break all this information up into individual

Hi all. A represent Official CentOS group on Facebook: https://www.facebook.com/groups/2371797727/ Recently we have grown to 3.240+ members, and it looks like we are now more visible since we reached 3000+ members. In last 7 days we had 131 new members ~19 per day, mostly newbie's with problems. Since I am only active admin/knowledgeable person in the group, I am under big load. Karanbir and Ralph try to help, but I am mostly alone "out there" So if any of you are willing to answe...

Hello, I have problems running Xen (from Debian 7, i386 userspace) on Asus P3-AE5 system (M2V-TVM board) with Athlon 64 3000+ CPU (AM2, 1.8GHz). In short, Xen is not accessible from amd64 Linux kernels but works fine with 686 kernels. Long version: xen-system-i386 (4.1.4-3+deb7u1) works fine with linux-image-3.2.0-4-686-pae xen-system-amd64 (4.1.4-3+deb7u1) works fine with linux-image-3.2.0-4-686-pae or linux-image-3...

We intend to use Asterisk with a very large dialplan (with a lot of functionality for 3000+ users). Each user will be able to change several of his parameters in the dialplan, so we will be forced to reload the diaplan constantly. Has anybody else any previous experience with a similar installation? There are some things that we'd like to know, if anybody can help us. These are:...