search for: 2400bps

...ss/input/input4 (input) UDEV [1215983089.770017] add /class/input/input4/event2 (input) This is what can be found in dmesg: usb 1-1: new low speed USB device using ohci_hcd and address 4 usb 1-1: configuration #1 chosen from 1 choice input: Ver 1.0 USB To RS232 Interface (V1.0) BaudRate 2400bps as /class/input/input4 input,hidraw0: USB HID v1.00 Gamepad [Ver 1.0 USB To RS232 Interface (V1.0) BaudRate 2400bps] on usb-0000:00:0f.2-1 Gamepad...? Sounds like fun. I tried these drivers: megatec - no success, I couldn not find any virtual serial ports being created (like with usbserial). m...

...usb 7-2: New USB device found, idVendor=0665, > idProduct=5161 > > > [ 7.838776] usb 7-2: New USB device strings: Mfr=1, Product=2, > > > SerialNumber=0 > > > [ 7.838779] usb 7-2: Product: WayTech USB-RS232 Interface (V1.0) > > > [ 7.838780] Baud rate 2400bps > > > [ 7.908845] input: WayTech USB-RS232 Interface (V1.0) > > > [ 7.908846] Baud rate 2400bps as > > > /devices/pci0000:00/0000:00:1d.1/usb7/7-2/7-2:1.0/input/input6 > > > [ 7.909014] generic-usb 0003:0665:5161.0004: input,hidraw3: USB HID > > &g...

...t; > > dmesg: > > [ 7.838773] usb 7-2: New USB device found, idVendor=0665, idProduct=5161 > [ 7.838776] usb 7-2: New USB device strings: Mfr=1, Product=2, > SerialNumber=0 > [ 7.838779] usb 7-2: Product: WayTech USB-RS232 Interface (V1.0) > [ 7.838780] Baud rate 2400bps > [ 7.908845] input: WayTech USB-RS232 Interface (V1.0) > [ 7.908846] Baud rate 2400bps as > /devices/pci0000:00/0000:00:1d.1/usb7/7-2/7-2:1.0/input/input6 > [ 7.909014] generic-usb 0003:0665:5161.0004: input,hidraw3: USB HID > v1.10 Gamepad [WayTech USB-RS232 Interface (V1....

...nitek Alpha 1000Ps, and I supossed it would work with megatec_usb driver, as other Unitek models. It has an USB interface, and when I plug it into my system I've got this message: chopito:/home/jordi# dmesg | tail -n4 input: WayTech Development(S) WayTech USB-RS232 Interface (V1.0) Baud rate 2400bps as /class/input/input4 input: USB HID v1.00 Gamepad [WayTech Development(S) WayTech USB-RS232 Interface (V1.0) Baud rate 2400bps] on usb-0000:00:1d.1-2 So, apparently, it has an USB-HID interface. Output from lsusb: chopito:/home/jordi# lsusb Bus 005 Device 001: ID 0000:0000 Bus 002 Device 004:...

...lowing is some relevant output: ---------------------- T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=1.5 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0f03 ProdID=0001 Rev= 0.01 S: Manufacturer=Ver 1.0 S: Product=USB To RS232 Interface (V1.0) BaudRate 2400bps C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=02 Driver=usbhid E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=10ms ----------------------- Bus 001 Device 002: ID 0f03:0001 Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB...

...or=0665, idProduct=5161 Oct 25 20:00:09 localhost kernel: [33773.922011] usb 7-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 Oct 25 20:00:09 localhost kernel: [33773.922014] usb 7-2: Product: WayTech USB-RS232 Interface (V1.0) Oct 25 20:00:09 localhost kernel: [33773.922015] Baud rate 2400bps Oct 25 20:00:09 localhost kernel: [33773.993071] input: WayTech USB-RS232 Interface (V1.0) Oct 25 20:00:09 localhost kernel: [33773.993073] Baud rate 2400bps as /devices/pci0000:00/0000:00:1d.1/usb7/7-2/7-2:1.0/input/input9 Oct 25 20:00:09 localhost kernel: [33773.993218] generic-usb 0003:0665:5161...

Hi, I would like to send and receive data in Asterisk with a V.22bis (2400bps) software modem on a SIP or IAX channel. From research so far, it looks like IAXmodem will only support fax (no data support). The spandsp docs do mention V.22bis modem module, but I have not been able to find anything on how it might be used in Asterisk. Any suggestions on where I could get...

...tcng services: Execute : qdisc add dev eth1 handle 1:0 root dsmark indices 4 default_index 0: Execute : qdisc add dev eth1 handle 2:0 parent 1:0 htb: Execute : class add dev eth1 parent 2:0 classid 2:1 htb rate 56000bps: Execute : class add dev eth1 parent 2:1 classid 2:2 htb rate 125bps ceil 2400bps: .................................. [root@qos tcng]# ./tcng status traffic control on eth0: [OFF] traffic control on eth1 : [ON] traffic control on hdlc0: [OFF] traffic control on hdlc1: [OFF] traffic control on pvc0: [OFF] traffic control on pvc1: [OFF] [root@qos tcng]# ./tcng status eth1 traffic...

...it ring once, or restart Asterisk, after which the line-voltage re-appears. I have this problem with several different phones and know at least 1 other person with similar problems. - Making data-calls from a line on the TDM40P, through the X100P, to an external number is almost impossible. Even 2400bps is unreliable, and anything higher than that usually doesn't even connect. Voice- calls sound very clear, though. I suspect it might have something to do with the first problem above, as I've also tried data-calls between ports on that same TDM40P, with the exact same results. I've e...

...idn't guess to check. The firmware was not fresh, but upgrading > doesn't help. > > Looking at your SIP information when your ITSP initiated a T.38 > > session it did not indicate a maxmimum bitrate, it would appear your > > spa112 attempted to negotiate a connection at 2400bps. > Whether there is a way to force my provider to indicate maximum bitrate? > > Do you have a sip debug session when you sent a fax from your Asterisk > > box to the PSTN, it would be interesting to see if it sends it as a > > t.38 or reverts to G711 audio. > I have collect...

...ople that are interested: The codec that a client uses is determined by the server, so use this command on your server to switch over to using the new one: v_voicecodec voice_speex And then these commands to change between different quality voice streams (also on the server): v_voicequality 1 : 2400bps, lowest quality sv_voicequality 2 : 6000bps sv_voicequality 3 : 8000bps sv_voicequality 4 : 11200bps sv_voicequality 5 : 15200bps, highest quality Erik Johnson Valve -----Original Message----- From: Tyler Knott [mailto:vault-responce@charter.net] Sent: Friday, January 03, 2003 6:08 PM To: speex-...

...fax reception? Well I opened an issue on Mantis (https://issues.asterisk.org/view.php?id=16756) and turns out it might be spandsp-related. What happens is, when I use app_fax to receive a fax using T.38, I get very low transmission rates, and about 30% of the faxes are just not transmitted at all. 2400bps is not uncommon. If instead of T.38 I use an analog landline connected to that very same Asterisk box, app_fax works wonderfully well transmitting at full 9600bps. Just to rule out Asterisk's T.38 handling, I noticed that Fax For Asterisk works perfectly with T.38, also on that same box. I'...

...dering if anyone could give me a little assistance here. I'm trying to setup monitoring of the UPS so the system can shutdown nicely. I have an Energizer ER-HM450 UPS. When I plug it in the system finds it as: kernel: input: USB HID v1.00 Gamepad [Ver 1.0 USB To RS232 Interface (V1.0) BaudRate 2400bps] on usb-0000:00:03.1-1 Looking at the FAQ makes me think I should have a section in the conf file that looks like: driver = hidups port = /dev/usb/hid/hiddev0 problem is that /dev/usb/hid/hiddev0 does not exist. Anyone happen to have a configuration using an Ene...

Device manufacturer: JAWAN tech Name: JW-UPSLC02 Protocol: Q1 / Megatec protocol Product Description from ?nut-scanner? : ? WayTech USB-RS232 Interface (V1.0) Baud rate 2400bps? vendorid = "0665" productid = "5161" [upsc output] battery.charge: 100 battery.voltage: 13.60 battery.voltage.high: 13 battery.voltage.low: 10.4 battery.voltage.nominal: 12.0 device.mfr: device.model: device.type: ups driver.name: blazer_usb driver.parameter...

Anyone using this feature of asterisk's voicemail? I'd never heard of ADSI, and saw it as I was perusing the voicemail source this morning. Is it some kind of visual way of managing voicemail on your phone's display, or does it require a terminal of some kind? Thanks! j

...atec/Q1 protocol USB driver 0.03 (2.4.3) 0.000000 debug level is '5' 0.037486 Checking device (0665/5161) (002/004) 0.450857 - VendorID: 0665 0.450894 - ProductID: 5161 0.450900 - Manufacturer: unknown 0.450906 - Product: WayTech USB-RS232 Interface (V1.0) Baud rate 2400bps 0.450913 - Serial Number: unknown 0.450918 - Bus: 002 0.450923 Trying to match device 0.450932 Device matches 0.455814 send_to_all: SETINFO ups.vendorid "0665" 0.455852 send_to_all: SETINFO ups.productid "5161" 0.455865 send_to_all: SETINFO device.typ...

mmh.. I looked quickly at the logs: - from time to time some character is swapped with something other (just like in the 'F' reply of your previous logs), but this shouldn't be a big problem; - then, suddenly, the queries timeout (just like when you relaunch the driver after a stale) - this is the problem. We need to make sure this isn't something vm-related (if so, having almost

Hello List. We are having some problems using t.38 together with a Cisco voice router at one of our providers end. We are using the new digium asterisk fax module to generate the fax, and when we use together with our internal Audiocodes Mediant 2000 gateways, we have no issues what so ever, and the faxes go right through. When we send faxes to our other provider, who has cisco hardware

...are not interested in helping. I did glean from them that there is some creative use of modem control lines (DTR,CTS are clearly trying to do something). I have tried some WINEDEBUG="+trace,+comm" and hope someone else sees something useful in it. I notice that it reports baud rate of 2400bps when setserial is 115200, and the windows app is at 115200. (also disabled baud rate negotiation in the app to no avail). I have tried adding the `low_latency` flag to ttyS0. I removed a bunch of lines that were repeated from the wine debug channel output because the orginal file was 33M. I r...

...iver 0.32 0.000000 debug level is '5' 0.001382 upsdrv_initups... 0.037904 Checking device (0665/5161) (002/004) 1.031424 - VendorID: 0665 1.031937 - ProductID: 5161 1.032277 - Manufacturer: unknown 1.032583 - Product: WayTech USB-RS232 Interface (V1.0) Baud rate 2400bps 1.032743 - Serial Number: unknown 1.032854 - Bus: 002 1.032963 Trying to match device 1.033077 Device matches 1.033218 nut_usb_set_altinterface: skipped usb_set_altinterface(udev, 0) 1.033353 send_to_all: SETINFO ups.vendorid "0665" 1.033473 send_to_all: SETINF...