search for: 20kbps

...-band mode (sampling rate 16000) and 20ms frames with signal type set to SIGNAL_VOICE. I have a few questions here: 1. When I choose VBR mode, the codec seems to choose the bitrate on its own. However, that seems to be an issue on mobile devices. In some cases, when I configure the bitrate to say 20kbps, I see that the outgoing codec bitrate at runtime is sometimes far less (11-12kbps even). That leads to a lower received audio quality. When I choose CBR mode however, the outgoing bitrate is fixed at 20kbps and produces better audio quality. Is there a way to bias the VBR mode to use a value clos...

Hi, I''ve have my IP and TC scripts working OK but my rate limiting does not seem to be being appiled. My available download speed is around 150kbps. I''d like to limit this box and the machines it forwards for to 10kbps each, a total of 20kbps. Thus leaving 130kbps unused. The classes I''ve created are simple and the stats show they are moving bytes OK, however; the entire 150kbps is always used. Is this odd? Have I missed something in my simple classes below? tc qdisc add dev eth1 root handle 1: htb default 12 tc class add d...

...2.168.100.2:/home/doctor/marcia . doctor@192.168.100.2''s password: marcia 16% 1844KB 19.6KB/s 08:05 ETA ########################################### dump is: tmp/dumpVPNLOCAL.txt.bz2 I don''t know why it''s limiting the traffic to 20kbps (bytes) there. When all rules are disabled, all the bandwidth is used again. There are no rules applied on the other linux box responsible for the VPN (remote gateway). Thanks again! Ismael ------------------------------------------------------------------------- Take Surveys. Earn Cash. In...

Hello, I have been trying to playback a video file via Playback() in Asterisk 1.8.7.1 but the file format seems to fail. [2011-12-02 18:46:24] WARNING[7665]: file.c:653 ast_openstream_full: File /etc/asterisk/cp-10fps-QCIF-20Kbps.h263 does not exist in any format [2011-12-02 18:46:24] WARNING[7665]: file.c:959 ast_streamfile: Unable to open /etc/asterisk/cp-10fps-QCIF-20Kbps.h263 (format 0x4 (ulaw)): No such file or directory The file of course exists and it's chowned to asterisk.asterisk. I think it's a file forma...

Hi, (this is my first post here) A previous thread, starting Date: Tue 19 Nov 2002 - 06:09:56 EST "[vorbis] need speech and music in one" http://www.xiph.org/archives/vorbis/200211/0142.html expressed needs similar to mine, to encode a lengthy speech at low bitrate. I did some tests initially in September then concluded in December, and I was surprised to find Vorbis to be the best

...mbit #add leaf classes, 1:2 is lan, 1:3 is outbound max tc class add dev eth0 parent 1:1 classid 1:2 htb rate 100mbit tc class add dev eth0 parent 1:1 classid 1:3 htb rate 40kbps # 1:31 is ftp with lower prio, 1:32 is ACk AND email higher prio tc class add dev eth0 parent 1:3 classid 1:31 htb rate 20kbps ceil 40kbps prio 2 tc class add dev eth0 parent 1:3 classid 1:32 htb rate 20kbps ceil 40kbps prio 1 #filter traffic into classes tc filter add dev eth0 parent 1:0 prio 0 protocol ip handle 20 fw flowid 1:2 tc filter add dev eth0 parent 1:0 prio 0 protocol ip handle 26 fw flowid 1:31 tc filte...

The Opus RFC seems to recommend a frame size of 20ms for most applications. For wideband speech, the sweet spot range is recommended to be 16-20kbps. 20ms frames => 50 frames per second. For a VoIP application, the header overhead per frame (IP+UDP+RTP+SRTP) is 44bytes => 17.6kbps at 50 frames per second. So a 20ms frame size seems to cause a roughly 100% overhead of header data. Therefore, higher frame sizes seem to make more sense to r...

I''m getting a slow network speed (download/upload) domU and dom0 limits in 10kbps/20kbps. Booting a kernel without Xen, this doesnt happens /etc/xen/xend-config.sxp (network-script network-bridge) (vif-script vif-bridge) (dom0-min-mem 196) (dom0-cpus 0) cat /etc/xen/XXX.cfg kernel = ''/boot/vmlinuz-2.6.26-1-xen-amd64'' ramdisk = ''/boot/initrd.img-2.6...

Hey everyone, Here's one way to get .ogg files down to about ~20kbps, and it's not too hard: 1. Use sox to resample the files down to 11025khz mono. 2. Feed these to OGGLAME (Lame 3.84 Alpha 1 is what I had laying around on my hard drive). OGGENC demands that the files be 44.1khz, but this version of ogglame didn't seem to care what the sample rate was....

Please pardon me if you have already seen this posting, but I received no postings from the list for a week....I assumed the list was down. I would like to batch re-encode MP3 files on the Icecast host. A command-line utility to take say a 56kbps MP3 file as input and produce a 20kbps MP3 file as out would be ideal. --------------------------------------------------------------- Todd Merriman - Rainbow Radio Sound & Light +1 770 889 5897 8030 Pooles Mill Dr., Ball Ground, GA 30107 dj@RainbowRadio.com http://www.RainbowRadio.com ----------------------------------------------...

...nline. What would be the best encoding to use the ogg or mp3 or mp3 pro Right now i'm using MP3 16KBPS 11KHZ and it uses about 3.1KB/sec of bandwidth. Is there something I can use that has the same quality with lower bandwith. I've tried MP3pro using the lowest profile which I think was 20KBPS at 16KHZ and it uses 3.7KB/sec --- >8 ---- List archives: http://www.xiph.org/archives/ icecast project homepage: http://www.icecast.org/ To unsubscribe from this list, send a message to 'icecast-request@xiph.org' containing only the word 'unsubscribe' in the body. No subject...

...gt; 20ms frames with signal type set to SIGNAL_VOICE. > > I have a few questions here: > > 1. > When I choose VBR mode, the codec seems to choose the bitrate on its own. > However, that seems to be an issue on mobile devices. In some cases, > when I configure the bitrate to say 20kbps, I see that the outgoing > codec bitrate at runtime is sometimes far less (11-12kbps even). That > leads to a lower received audio quality. > When I choose CBR mode however, the outgoing bitrate is fixed at 20kbps > and produces better audio quality. > > Is there a way to bias the...

Dear all, I know this is not imq mailing list. But many of the users over here have done exactly what i want. Requirement:- I want to tight bound eth1 for 100 kbps but after i want to create many classes of 64 kbps or 50 kbps and others. But the total sum of classes is more than 100 kbps so my eth1 is not restrciting total bandwidth at 100kbps. According to search on google imq is the solution.

dear vorbis developers, it would be very useful, if oggenc would support constant low-bandwith bitrates for testing. something from 20kbps to 44kbps, so anyone could test streaming over modem and isdn. audio quality doesn't matter. mörk --- >8 ---- List archives: http://www.xiph.org/archives/ Ogg project homepage: http://www.xiph.org/ogg/ To unsubscribe from this list, send a message to 'vorbis-dev-request@xiph.org'...

...hus making audio choppy and unclear. Make shure to disallow all codecs and then allow only ILBC or lpc10 (search for it in iax.conf), use the one that gives better results in your case. lpc10 uses 20ms samples, so you can not allow at the same time both!!. if you cannot connect at least at about 20kbps, your audio will suffer, and from mi experience, at 16kbps the audio becomes so distored that is very difficult to understand the other party. --- asterisk-users-request@lists.digium.com wrote: Message: 1 Date: Wed, 19 Jan 2005 15:05:53 -0200 From: "alexandre::aldeia digital" <alepa...

...2 quantum $QUANTUM $TC class add dev $IFext parent 1:1 classid 1:40 htb rate 64kbps ceil $MAX_RATE prio 3 quantum $QUANTUM $TC class add dev $IFext parent 1:1 classid 1:50 htb rate 32kbps ceil $MAX_RATE prio 4 quantum $QUANTUM $TC class add dev $IFext parent 1:1 classid 1:60 htb rate 20kbps ceil $MAX_RATE prio 5 quantum $QUANTUM $TC class add dev $IFext parent 1:1 classid 1:70 htb rate 16kbps ceil $MAX_RATE prio 6 quantum $QUANTUM $TC class add dev $IFext parent 1:1 classid 1:80 htb rate 8kbps ceil $MAX_RATE prio 7 quantum $QUANTUM $TC class add dev $IFext parent 1:1 cl...

...he default class). Any help will be appreciated here''s my htb conf #!/bin/bash tc qdisc del dev eth1 root tc qdisc add dev eth1 root handle 1: htb default 80 tc class add dev eth1 parent 1: classid 1:1 htb rate 65kbps ceil 65kbps tc class add dev eth1 parent 1:1 classid 1:10 htb rate 20kbps ceil 35kbps prio 3 tc class add dev eth1 parent 1:1 classid 1:20 htb rate 5kbps ceil 10kbps prio 0 tc class add dev eth1 parent 1:1 classid 1:30 htb rate 8kbps ceil 11kbps prio 2 tc class add dev eth1 parent 1:1 classid 1:40 htb rate 23kbps ceil 40kbps prio 1 tc class add dev eth1 parent 1:1 classi...

I would like to batch re-encode MP3 files on the Icecast host. A command-line utility to take say a 56kbps MP3 file as input and produce a 20kbps MP3 file as out would be ideal. --------------------------------------------------------------- Todd Merriman - Rainbow Radio Sound & Light +1 770 889 5897 8030 Pooles Mill Dr., Ball Ground, GA 30107 dj@RainbowRadio.com http://www.RainbowRadio.com ----------------------------------------------...

...encoding to use the ogg or mp3 or mp3 pro > > Right now i'm using MP3 16KBPS 11KHZ and it uses about 3.1KB/sec of > bandwidth. Is there something I can use that has the same quality > with lower bandwith. > > I've tried MP3pro using the lowest profile which I think was 20KBPS > at 16KHZ and it uses 3.7KB/sec --- >8 ---- List archives: http://www.xiph.org/archives/ icecast project homepage: http://www.icecast.org/ To unsubscribe from this list, send a message to 'icecast-request@xiph.org' containing only the word 'unsubscribe' in the body. No sub...

Hi all I have following script in my server. Now I want to restrict ip 192.168.3.2 to 128kbps (downlink). But in this case client can download upto 500kbps and upload cannot exceed more than 20kbps. Now what should I do to restrict client 192.168.3.2 within 128kbps downlink and 64kbps uplink. tc qdisc del dev eth0 root tc qdisc add dev eth0 root handle 1:0 htb tc class add dev eth0 parent 1:0 classid 1:1 htb rate 300kbit tc class add dev eth0 parent 1:0 classid 1:11 htb rate 128kbit c...