search for: 1mhz

...bout Sample Rate, If the Frame header can look to the metadata block streaminfo for sample rate what (if anything limits it to 655350Hz)? Can all frame headers not just point to streaminfo and it be specified in streaminfo as all 1s ie 2^20-1 = 1,048,575Hz? It would be really good to be able to use 1MHz and beyond for some of my/our work. Does anything currently support this? Regards Graham Extracts from https://xiph.org/flac/format.html METADATA_BLOCK_STREAMINFO <20> Sample rate in Hz. Though 20 bits are available, the maximum sample rate is limited by the structure of frame headers...

...RX at each end, whereas normal ethernet does not, as the switch is cross-wired. Using an ethernet crossover cable does not help since it is swapping (1,2) and (3,6), not (1,2) and (4,5). The problem with using CAT5 for long telco runs is that the impedance is wrong at the line clock rate (~1MHz). IIRC the impedance for telco is specified at 600 ohms @ 1MHz, whereas for CAT5 the impedance is actually specified at around 100MHz, where the ethernet line rate is. You can get away with it so long as the impedance is right, but unless you've got the data sheets you're playing gues...

...r cable does not help since it is swapping (1,2) and (3,6), not >(1,2) and (4,5). > Well, at least a crossover cable doesn't fool people into thinking they got it right. :-) >The problem with using CAT5 for long telco runs is that the impedance is >wrong at the line clock rate (~1MHz). IIRC the impedance for telco is >specified at 600 ohms @ 1MHz, whereas for CAT5 the impedance is actually > T1s are always 100-110ohm, E1s are the same when on pairs, and 75ohm on coax. Only analogue pairs are terminated at 600ohm, and no line can actually be greater than 120*PI (about...

...ng and S/PDIF out interface USB - 10 USB2.0/1.1 ports Manageability - WfM 2.0, DMI 2.0, WOL by PME, WOR, PXE, Chassis Intrusion BIOS - 4Mb Flash ROM, Award BIOS, PnP, DMI2.0, WfM2.0, SM BIOS 2.3, ACPI 2.0 Overclocking Features - SFS (Stepless Frequency Selection) from 200MHz to 230MHz at 1MHz - increment - Adjustable Voltage : - *core: @ 0.025V stepping - *chipset: 2- stepping - *ddr: 4- stepping - Overclocking Protection: - ASUS C.P.R.(CPU Parameter Recall) Special Features - ASUS Q-Fan - ASUS My Logo 2 - ASUS CrashFreeBIOS2 - ASUS EZ Flash 2 Back Panel I/O Ports - 4 x U...

Hi there, I am getting very low throughput (around 0.29Mbps) while running netperf benchmark for guest to guest communication on a single physical host. To analyse where the time is spent in hypervisor I wanna use profiling. Please help me choosing good profiler according to my requirments. Should it be better in my case, Xentrace, gprof, xenoprof  or Oprofile. Is it possible to use some vtune

Hi there, I am getting very low throughput (around 0.29Mbps) while running netperf benchmark for guest to guest communication on a single physical host. To analyse where the time is spent in hypervisor I wanna use profiling. Please help me choosing good profiler according to my requirments. Should it be better in my case, Xentrace, gprof, xenoprof  or Oprofile. Is it possible to use some vtune