search for: 15usec

...e: failed opcode was: unknown Nov 21 06:08:33 server kernel: hda: no DRQ after issuing WRITE Nov 21 06:08:34 server kernel: ide0: reset: success Found one website that told me too try hdparm -i to see whats up: /dev/hda: Model=ST3500320AS, FwRev=SD15, SerialNo= Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs RotSpdTol>.5% } RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=4 BuffType=unknown, BuffSize=0kB, MaxMultSect=16, MultSect=off CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=268435455 IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120} PIO modes...

...-Plus 6.1) shows an overhead of about 140 SK> microseconds per call to sum, so I would expect it to take 100*1e-6*9e5=90 seconds. SK> SK> The thing is, it is worse than this. If I do a case with 900x90x3 it takes 300 usec per 'sum'. SK> SK> R is fairly stable at just under 15usec per 'sum' on my machine. SK> SK> A little more investigation (together with office mate Tony Plate) provides some insight. SK> SK> Using mem.tally.reset() and mem.tally.report() shows that for this case it is allocating a SK> whopping 1280 bytes for each call to 'sum...

...nit: You don''t need SEG_SS if you''re using bp, as bp defaults to SS segment. > shl eax, #16 > SEG SS > - mov ax, _int15_function.DX [bx] > + mov ax, .int15_function32.DX [bp] As above. -- Mats > > ;; convert to numbers of 15usec ticks > mov ebx, #15 > > _______________________________________________ > Xen-staging mailing list > Xen-staging@lists.xensource.com > http://lists.xensource.com/xen-staging > > > _______________________________________________ Xen-devel mailing list Xen-de...

...t 100%. [root at marge ~]# uname -a Linux marge.gizmopartners.com 2.6.18-164.6.1.el5 #1 SMP Tue Nov 3 16:18:27 EST 2009 i686 i686 i386 GNU/Linux [root at marge ~]# hdparm -i /dev/hda /dev/hda: Model=WDC WD2000JB-00GVC0, FwRev=08.02D08, SerialNo=WD-WCAL83129186 Config={ HardSect NotMFM HdSw>15uSec SpinMotCtl Fixed DTR>5Mbs FmtGapReq } RawCHS=16383/16/63, TrkSize=57600, SectSize=600, ECCbytes=74 BuffType=DualPortCache, BuffSize=8192kB, MaxMultSect=16, MultSect=16 CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=268435455 IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,r...

...separate IDE channel. Two partitions on the /dev/hdc are /dev/hdc1, /dev/hdc2 - both using ext3. For more detailed HDD parameters, this is 'hdparm -i /dev/hdc': ----------------- /dev/hdc: Model=IC35L060AVV207-0, FwRev=V22OA66A, SerialNo=VNVB30G8TD23UH Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs } RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=52 BuffType=DualPortCache, BuffSize=1821kB, MaxMultSect=16, MultSect=16 CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=66055248 IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120} PIO modes: pio0 pi...

...;c0146122>] [<c0108f4b>] Jun 24 19:24:10 server kernel: Code: 0f 0b 31 04 ca db a0 e2 eb b5 8b 45 0c 85 c0 75 1c 8b 54 24 /usr/sbin/hdparm -i /dev/hdb= (old, but still works :) /dev/hdb: Model=WDC AC310200R, FwRev=15.01J15, SerialNo=WD-WT6750028428 Config={ HardSect NotMFM HdSw>15uSec SpinMotCtl Fixed DTR>5Mbs FmtGapReq } RawCHS=16383/16/63, TrkSize=57600, SectSize=600, ECCbytes=40 BuffType=DualPortCache, BuffSize=512kB, MaxMultSect=16, MultSect=16 CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=20044080 IORDY=on/off, tPIO={min:160,w/IORDY:120}, tDMA={min:120,rec...

How do I check if the proper sata drivers are being loaded? If they are not what can I do other then rebuilding the kernel? Thank you in advance, Randy _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users

I also experienced this problem and the first thing that really helped out was changing the timing in the span line of the zaptel.conf. Change it to look like this (see below) and see if it helps out. I got the error much less after doing this and eventually got rid of the error completely by removing my raid drives, installing an IDE drive, enabling DMA mode on the Hard Drive, enabling APCI in

We run several RH7.2/7.3 servers & recently 2 of them, although still working fine, have started to show kjournald as generally using over 50% cpu% on 'top' - virtually continuously. Free cpu% generally less than 25% now! Both machines are also using software RAID5 EIDE ....... otherwise are standard server installs. Any info on what kjournald is & why it should have recently

...nmaskirq = 1 (on) using_dma = 1 (on) keepsettings = 0 (off) nowerr = 0 (off) readonly = 0 (off) readahead = 8 (on) geometry = 2495/255/63, sectors = 40088160, start = 0 Model=IBM-DPTA-372050, FwRev=P76OA30A, SerialNo=JMYJMFJ4664 Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs } RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=34 BuffType=DualPortCache, BuffSize=1961kB, MaxMultSect=16, MultSect=16 CurCHS=16383/16/63, CurSects=-66060037, LBA=yes, LBAsects=40088160 IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120} PIO modes: pio0 p...

Hello Folks, We have 2 (identical hardware) busy public 2U rack servers, both have several hundred users & peak email (for example) deliveries at 300/5min during the daytime. Both servers run RAID1 over 2 EIDE disk drives. One server is fine - it never has problems - it is running RH7.3 and CPU loads are normal. The other server has constant disk activity & kjournald at CPU load of

...formations, on the hdd I changed from udma5 to udma4, suggested me on the dell-linux mailing list. It seams I have lesser problems, but they persist. [root@inspiron root]# hdparm -i /dev/hda /dev/hda: Model=HITACHI_DK23CA-30, FwRev=00H0A0G1, SerialNo=11BPWF Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs } RawCHS=16383/16/63, TrkSize=36477, SectSize=579, ECCbytes=4 BuffType=DualPortCache, BuffSize=2048kB, MaxMultSect=16, MultSect=16 CurCHS=16383/16/63, CurSects=-66060037, LBA=yes, LBAsects=58605120 IORDY=yes, tPIO={min:400,w/IORDY:120}, tDMA={min:120,rec:120} PIO modes:...

...p would be appreciated Or if you need more info just ask. ned blurock Here is some less vague info: ---------------------------------------------------------------- hdparm -i /dev/hda /dev/hda: Model=IC25N040ATCS05-0, FwRev=CS4OA63A, SerialNo=CLP425F4GJUT9A Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs } RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=4 BuffType=DualPortCache, BuffSize=7898kB, MaxMultSect=16, MultSect=16 CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=78140160 IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120} PIO modes: pi...