search for: 1400x1050

...=== Nothing more is shown using --verbose $ xrandr Screen 0: minimum 320 x 200, current 1280 x 1024, maximum 4096 x 4096 VGA-1 disconnected (normal left inverted right x axis y axis) LVDS-1 connected 1280x1024+0+0 (normal left inverted right x axis y axis) 0mm x 0mm 1280x1024 59.9*+ 1400x1050 60.0 + 60.0 1280x960 59.9 1152x864 60.0 1024x768 59.9 800x600 59.9 640x480 59.4 720x400 59.6 640x400 60.0 640x350 59.8 === SYS/SYSFS === $ cat /sys/bus/i2c/devices/1-0075/name ch7006 $ cat /sys...

> On Tue, Apr 01, 2014 at 02:53:02PM -0400, Ilia Mirkin wrote: >I believe that ch7006 is the only external encoder that's supposed to >work, so you're in luck. It sounds like it passes the nv04_tv_identify >stage of nv04_tv_create -- perhaps it fails later? Although based on >the prints, it's even doing dpms stuff (but it hits _detect a second >time... odd). Try

I originally set up this monitor with an analogue lead. Everything seemed fine, so I didn't check xorg.conf at all. Then I bought a digital lead, and since then the monitor blinks. Running system-config-display identifies it as a 1280 x 1084 CRT monitor. It is an LCD monitor. That model is not on the drop-down list, so assuming that a specific driver wasn't available for it, I

Hi, Did anyone manage to get 4.4 working on a Dell D620 laptop? The thing has a 1440x900 LCD screen, but I don't get X the work with that resolution. (lspci: Intel Corporation Mobile 945GM/GMS/940GML Express Integrated Graphics Controller (rev 03)) Google suggested to use '915resolution', which I installed (915resolution-0.5.2-1.el4.rf), but that doesn't help. Regards, --

http://www.realvnc.com/products/enterprise/4.1/ipv6.html IPv6 support in VNC Server E4.1.7/P4.1.2 VNC Server E4.1.7 & P4.1.2 are fully IPv6-aware, but is shipped with IPv6 support disabled by default, for security reasons. IPv6 can be enabled by setting "InTransports=IPv6,IPv4" (the default being IPv4 only), either on the command-line when starting vncserver under Unix Ok.

I am attempting to setup a dell inspirons 1200 laptop media accelerator 900 from intel is the chipset so I am using the i810 driver. In the default 1024x768 everything is fine. I am trying to setup the external port not the LCD to be 1366x768. I added a modeline to xorg.conf of: Section "Monitor" Identifier "Monitor0" VendorName "Monitor Vendor"

...quot;Screen0" Device "Videocard0" DefaultDepth 16 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection SubSection "Display" Viewport 0 0 Depth 16 Modes "1600x1200" "1600x1024" "1440x900" "1400x1050" "1280x1024" "1280x1024" "1280x960" "1280x960" "1280x800" "1280x800" "1152x864" "1152x864" "1152x768" "1152x768" "1024x768" "1024x768" "800x600" "800x600"...

...0.2 Hz Modeline "1440x900-60.2" 108.84 1440 1472 1880 1912 900 918 927 946 +hsync +vsync # Default mode "1440x900": 106.5 MHz, 55.9 kHz, 60.0 Hz Modeline "1440x900-60.0" 106.47 1440 1520 1672 1904 900 901 904 932 -hsync +vsync # Default mode "1400x1050": 122.0 MHz, 64.9 kHz, 60.0 Hz Modeline "1400x1050-60.0" 122.00 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync ## Alternate version of 720p (image approx 16:9, pixel 1:1) # Default mode "1366x768": 85.9 MHz, 47.7 kHz, 60.0 Hz Modeline "1366x7...

...0.2 Hz Modeline "1440x900-60.2" 108.84 1440 1472 1880 1912 900 918 927 946 +hsync +vsync # Default mode "1440x900": 106.5 MHz, 55.9 kHz, 60.0 Hz Modeline "1440x900-60.0" 106.47 1440 1520 1672 1904 900 901 904 932 -hsync +vsync # Default mode "1400x1050": 122.0 MHz, 64.9 kHz, 60.0 Hz Modeline "1400x1050-60.0" 122.00 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync ## Alternate version of 720p (image approx 16:9, pixel 1:1) # Default mode "1366x768": 85.9 MHz, 47.7 kHz, 60.0 Hz Modeline "1366x7...

http://bugs.freedesktop.org/show_bug.cgi?id=15729 Summary: nouveau fails to get ddc info from screen Product: xorg Version: unspecified Platform: x86-64 (AMD64) OS/Version: Linux (All) Status: NEW Severity: minor Priority: low Component: Driver/nouveau AssignedTo: nouveau at lists.freedesktop.org

...I cannot get sound to work 3) I cannot get the full screen resolution I can go to administration --> display and under the 'Hardwae' tab I can configure the display as a generic or as a Dell 1920x1200 but no matter what I choose the 'Settings' tab only lets me choose a max of 1400x1050 I can get the wireless and sound to work in Fedora 10 but I'm not sure how to tell specifically what devices they are.. I thought I could use Fedora 10 to help debug the sound & wireless. Thanks in advance for any help ...

...ected monitor to life. The output of xrandr on the system with both monitors is: Screen 0: minimum 320 x 200, current 1920 x 1080, maximum 16384 x 16384 LVDS-1 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 409mm x 230mm 1920x1080 60.00*+ 1680x1050 59.95 1400x1050 59.98 1280x1024 59.89 1280x960 59.94 1152x864 59.96 1024x768 59.92 800x600 59.86 640x480 59.38 720x400 59.55 640x400 59.95 640x350 59.77 DP-1 disconnected (normal left inverted right x axis y axis) HDMI-1 disco...

...veau [ DRM] DCB version 1.5 > [ 4.275836] nouveau [ DRM] DCB outp 00: f0003f00 000088b8 > [ 4.275972] nouveau [ DRM] DCB outp 01: f2045f14 0000ffff > [ 4.276148] nouveau [ DRM] DCB outp 02: f4204011 ffffffff > [ 4.276592] nouveau [ DRM] BIOS FP mode: 1400x1050 (108000kHz pixel clock) > [ 4.281237] nouveau [ DRM] Saving VGA fonts > [ 4.362670] nouveau D[ I2C][0000:01:00.0] probing TV encoders on bus: 1 > [ 4.363885] nouveau [ I2C][0000:01:00.0] detected TV encoder: ch7006 > [ 4.552433] [drm] Supports vblank timestamp...

...AddARGBGLXVisuals" "True" Option "TripleBuffer" "True" Option "DamageEvents" "True" SubSection "Display" # Modes "1680x1050" "1600x1024" "1440x900" "1400x1050" "1280x1024" "1280x960" "1280x800" "1152x864" "1024x768" "800x600" "640x480" Viewport 0 0 Depth 24 Modes "1680x1050" "1600x1200" "1600x1024&qu...

...Dell M991 and the Video Card is > shown as Nvidia NV11 (GeForce2 MX/MX400). CentOS 5.2 (32 bit) fully > updated. TIA! > # Xorg configuration created by system-config-display <snip> > Modes "1600x1200" "1600x1024" "1440x900" "1400x1050" "1280x1024" <snip> John & Bill: Thank you for the quick replies! I deleted the modes ahead of 1280x1024 and it's working. :-) I'd contemplated removing those modes, but better with your 2 cents! I believe that system-config-display works OK on my box (Dell Dimensi...

...0x1200+0+0 (normal left inverted right x axis y axis) 518mm x 324mm 1920x1200 59.95*+ 1920x1080 59.96 60.00 50.00 59.94 59.93 1920x1080i 60.00 50.00 59.94 1600x1200 65.00 60.00 1680x1050 69.88 59.95 59.88 1600x1024 60.17 1400x1050 74.76 70.00 59.98 1600x900 59.95 59.82 1280x1024 75.02 60.02 1440x900 59.89 1400x900 59.96 59.88 1280x960 60.00 1440x810 59.97 1368x768 59.88 59.85 1360x768 59.80 59.96 1280x800 59.99 59.97...

...reen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "AddARGBGlxVisuals" "True" SubSection "Display" Depth 24 # Modes "1400x1050" "1280x1024" "1024x768" "800x600" "640x480" Modes "1400x1050" EndSubSection EndSection

I think I may have updated the tv firmware between when it worked and when it didn't. I wonder it it has to do with bit depth. I use lubuntu and it doesn't let me pick the bit depth so I don't know what it using.

Be forewarned, I am new to Linux. I am using Ubuntu 9.10 (Karmic Koala). I have installed wine (1.1.38) and I am able to run RollerCoaster Tycoon 3 both with and without a virtual desktop. It runs with no problems except for the fact that it does not receive keyboard commands! I have looked all over the Internet and still have yet to find a solution. Someone help, please! I haven't

...l) Status: NEW Severity: normal Priority: medium Component: Driver/nouveau AssignedTo: nouveau at lists.freedesktop.org ReportedBy: anssi at mandriva.org QAContact: xorg-team at lists.x.org I have a laptop with GF6600Go, 10de:0148, 1400x1050 internal display, and DVI and VGA connectors. Connected to the DVI connector is a 1680x1050 display. When running X with RandR12 enabled, the laptop display shows distortions only, while nothing appears on the external display. Also, the server crashes after I run "xrandr --query". I...