search for: 1204

I have a Mediatrix 1204 FXO gateway setup for SIP. I would like to know if anyone has gotten this item to work with Asterisk. I need to get a 2 or 4 port FX0 gateway working with asterisk. The Idea is the following. PBX at lets say any Hotel(Analog lines FXS) - FX0 Gateway(1204) -- {Internet} -- Asterisk - local IVR s...

I'm having a problem getting outbound trunking to work using asterisk and an external SIP FXO. 7 digit dialing produces the following output: -- Executing Dial("SIP/mitel-fe17", "SIP/5925660@mediatrix-1204") in new stack -- Called 5925660@mediatrix-1204 -- SIP/mediatrix-1204-645e answered SIP/mitel-fe17 -- Attempting native bridge of SIP/mitel-fe17 and SIP/mediatrix-1204-645e -- Got SIP response 481 "Call-Leg Does Not Exist" back from 172.20.16.7 == Spawn extension (internal, 5925...

I have successfully implemented 1204 in semi production environment. Just want to share that it works very well, through the firewall (NATed). Unfortunately, it can not register with the server (and authenticate) but otherwise everything is fine. The audio quality is very good. Regards, Wojtek -------------- next part --------------...

Product Review Mediatrix 1204 4-Port SIP FXO Gateway Firmware: v2.4.10.69 - US Version US Retail: ~$750, Street Price: ~$450. The Mediatrix 1204 SIP FXO gateway is equipped with four RJ11 pstn jacks and one RJ45 Ethernet jack on its rear panel. It terminates the four pstn lines in either Loop Start or Ground Start mode, handle...

Dear Group, I have been able to configure my Asterisk BOX to receive calls from Mediatrix 1204. I'm having problems sending calls out via my Mediatrix unit. The SIP Invite is sent to the Mediatrix but the Mediatrix unit sends back a Status : 480 Temporarily Unavailable. This is my configuration on Asterisk; exten => _78996.,1,Dial(SIP/${EXTEN:5}@192.168.6.52) exten => _78996,1...

Anyone had any good/bad/otherwise experience with the Mediatrix 1204 Sip FXO 4-port gateway? The archives tend to suggest the box is not very straight forward, and possibly lacks some basic pstn interaction features. Thinking about trying one in place of a pair of x100p's (functioning fine now). CallerId, etc, supported on this gateway? Rich

Hello guys, I need your help related to a mediatrix 1204 configuration. I read some of the messages that you posted in the asterisk users mailing list about the mediatrix 1204 and decided to contact you. I know that the community is not related to Mediatrix devices, but so far I have not found any other group that has work as much as you with them. I bou...

...send it to your email tonight when I'll be in my home. I have an APA III-4FXO too, until today I can't put it to work with asterisk. Kind regards, Miguel Date: Fri, 03 Sep 2004 16:07:59 +1000 From: Jamie Carl <geek@j-code.net> Subject: [Asterisk-Users] Mediatrix APA III-4FXO (or 1204) help. Anyone with user manual? To: asterisk-users@lists.digium.com Message-ID: <41380A3F.5050202@j-code.net> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Hi all, I just picked myself up a Mediatrix FXO SIP gateway to play around with and hook into Asterisk but have no docu...

I added those lines to my configuration, and i just see with ethereal that my client dial and the 1204 led turn on and they started to interchange packets, im newbie with asterisk i have been trying another sip server with mediatrix that work so well, but i dont know how to set it up? could u send me all the configuration i need step by step? ----- Original Message ----- From: "Wojciech Tryc...

Possible Mediatrix 1204 fxo sip gateway workaround Need some feedback from experienced * users relative to this workaround please please please. Problem: The mediatrix 4-port fxo gateway does not provide any mechanism for * to select which "port" an outbound pstn call will use. (See lots of previous posts over...

Dear Group, I have my Asterisk box working with a Mediatrix 1204. I have 2 questions; 1) I do not seem to get a Call ID on the call coming via the Mediatrix 1204. I was wondering if anyone had this configured and if they could share this with me? 2) How do you route a call based on caller ID on Asterisk. At the moment I'm routing calls via DNIS. Thanks a...

https://bugzilla.netfilter.org/show_bug.cgi?id=1204 Bug ID: 1204 Summary: Test if a specific IP is in a named set Product: nftables Version: unspecified Hardware: x86_64 OS: Debian GNU/Linux Status: NEW Severity: enhancement Priority: P5...

I am attempting to use a Mediatrix 1204 to interface to multizone paging from Asterisk. I have 4 different paging interfaces and want to connect each of those 4 to an FXO port on the Mediatrix. The desired result is to be able to issue some SIP dial string from asterisk, seize the FXO port on the Mediatrix and then have a speech path....

...d = sipUA1AuthValid = 1 My sip.conf and extension.conf are the same that you send. Any help will be appreciated. Kind regards, Miguel >Date: Sat, 4 Sep 2004 15:38:42 -0700 (PDT) >From: Gonzalo Gasca Meza <xomeboy@yahoo.com> >Subject: [Asterisk-Users] Mediatrix APA III-4FXO (or 1204) help.> > Anyone with user manual >To: Asterisk Users Mailing List - Non-Commercial Discussion > <asterisk-users@lists.digium.com> >Message-ID: <20040904223842.16049.qmail@web60701.mail.yahoo.com> >Content-Type: text/plain; charset="us-ascii" > > >He...

...I have a called fil consisting of the following strings. > fil [1] " 102.2 639" " 104.2 224" " 105.1 1159" " 107.1 1148" " 108.1 1376" [6] " 109.2 1092" " 111.2 1238" " 112.2 349" " 113.1 1204" " 114.1 537" [11] " 115.0 303" " 116.1 490" " 117.2 202" " 118.1 1864" " 119.0 357" I want to get a data frame like Time Obs 102.2 639 104.2 224 105.1 1159 107.1 1148 108.1 1376 109.2 1092 111.2...

Hi all, I just picked myself up a Mediatrix FXO SIP gateway to play around with and hook into Asterisk but have no documentation. Are there default passwords or IP's that I need to know if I do a factory reset? Or better still, would anyone have a User Manual they could send my way? Any help would be appreciated. TIA. Jamie

...show roots are outside unit circle plot.ts(simtimeseries, xlab="", ylab="", main="Time Series of Simulated Data") # Yule ---------------------------------------------------------------------------- q1 <- cbind(simtimeseries[1:1024]) q2 <- t(q1)%*%q1 s0 <- q2/1204 r1 <- cbind(simtimeseries[1:1023]) r2 <- cbind(simtimeseries[2:1024]) r3 <- t(r1)%*%r2 s1 <- r3/1204 t1 <- cbind(simtimeseries[1:1022]) t2 <- cbind(simtimeseries[3:1024]) t3 <- t(t1)%*%t2 s2 <- t3/1204 u1 <- cbind(simtimeseries[1:1021]) u2 <- cbind(simtimeseries[4:1024...

When I try to make a call using the Mediatrix 1204 is showed on the CLI: -- Executing SetCIDNum("SIP/2009-4df1", "1111") in new stack -- Executing Dial("SIP/2009-4df1", "SIP/2217008@192.168.199.5") in new stack Aug 11 15:14:10 WARNING[1211108144]: chan_sip.c:590 __sip_xmit: sip_xmit of 0x81 40c5c (le...

CentOS Errata and Security Advisory 2016:1204 Important Upstream details at : https://rhn.redhat.com/errata/RHSA-2016-1204.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: 809e9d71025ce9587d91b9f2d5d9fb02534a80cacae2a99996f46e1be7187480 spice-server-0.12.4-13.el...

CentOS Errata and Security Advisory 2017:1204 Moderate Upstream details at : https://rhn.redhat.com/errata/RHSA-2017-1204.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: ebfdee6821a0a033abc9f5063bd2e52ce7919986a5c1739fa84ffc7b1eb9a53c java-1.7.0-openjdk-1.7.0.141-...