search for: 1200va

Hi Folks, This is my first post on nut-upsdev. I would like to share a small patch to enable support for the Powercool PCRACK 1200VA ups. I found that the UPS uses megatec/krauler protocol but is sensitive to the USB buffer length passed to it in requests via usb_get_string(), and usb_get_string_simple(). If the buflen is greater than 102 then the ups will reply to requests but does not behave correctly. In this case the re...

Hi Team, I've been experimenting with getting the PowerShield Defender 1200VA UPS working and it appears to be supported by the blazer_usb driver, although it did not have the correct permissions within udev to load the driver as the non-root user after an RPM install on Fedora Core 16. [root at localhost ~]# lsusb ... Bus 006 Device 005: ID 0665:5161 Cypress Semiconductor...

Hi, Sometime ago I asked the question about getting nut to run on my iMac as I was having trouble getting the USB driver to behave with OS X. The same driver under LINUX is fine. It was suggested that the better option might be to run nut on a Rasberry PI instead and monitor the nut daemon from the iMac. Well I have bought a Rasberry PI, I have other things planned for it. I have installed nut

...uot;,        &fuji_subdriver },    /* Fuji UPSes */      { USB_DEVICE(0x0001, 0x0000),    NULL,        NULL,     &krauler_subdriver },    /* Krauler UP-M500VA */ +//    { USB_DEVICE(0x0001, 0x0000),    NULL,        "MEC0003",     &krauler_subdriver },    /* Powercool PCRACK-1200VA */      /* End of list */      { -1,    -1,    NULL,    NULL,    NULL }  }; @@ -1650,7 +1616,6 @@ void    upsdrv_makevartable(void)      /* allow -x vendor=X, vendorid=X, product=X, productid=X, serial=X */      nut_usb_addvars(); -    addvar(VAR_VALUE, "langid_fix", "Apply the...

...000000000 Power 25VA Frequency Nominal 50Hz Voltage 230.0V Voltage Nominal 230V Delay Shutdown 25s Delay Start 40s Firmware 02 Load 23% Power Nominal 1200VA Status OL During a power outage it used to last for about 15 minutes and then initiate the shutdown. however reviewing the logs of my systems: Apr 19 12:04:23 - OnBattery Apr 19 12:10:21 - Power from UPS cut, all systems got suddenly powered off (no graceful shutdown) Apr 19 12...

Hi, i just got a Phoenix Technologies PH1200UPSB 1200va serial-port ups and it is only partially supported by bestups driver (needs manual ID or driver rewriting). It comes with a tool called UPSilon 2.1 on a CD (which worked better with TERM=linux). After [sl]tracing it i came to these results: COMMANDS : - Command: I Response: "#XPHOENIX TECH...

...ocol. > > The relevant output of 'lsusb' is: > > Bus 002 Device 004: ID 051d:c812 American Power Conversion Douglas, It sounds like you have an UPS which was originally manufactured by Microsol. http://forums.freenas.org/index.php?threads/nobreak-bz1200-br-back-ups-rs-1200va-600w-bivolt-115-nt.20247/ http://article.gmane.org/gmane.comp.monitoring.nut.devel/6685 Bruno, Does your UPS show up as a USB ACM device in FreeBSD? Do you think that you and Douglas have the same basic UPS with different battery capacities? http://article.gmane.org/gmane.comp.monitoring....

Dear NUT users/developers, I'm having trouble while trying to configure the UPS APC BZ2200BI-BR[1] in NUT, which despite having a USB cable it apparently communicates using the serial protocol. The relevant output of 'lsusb' is: Bus 002 Device 004: ID 051d:c812 American Power Conversion The device is registered as /dev/ttyACM0 and uses the kernel module 'cdc_acm' (USB

Hi everyone, This is not directly NUT related, but i don't know where else I can still ask this. I have been using a pretty decent 2nd hand MGE ellipse premium 1200VA for a while now at home. http://www.mgeups.com/download/doc_intl/ small/premium/389uk.pdf It's been working very well for me on linux, but my linux server has recently passed away and now I only have Macs left. Therefore i wanna use this UPS for my mac trough USB. According to the online...

Anybody knows what configure command settings FreeNAS use to compile NUT? More info on my journey: http://forums.freenas.org/index.php?threads/nobreak-bz1200-br-back-ups-rs-1200va-600w-bivolt-115-nt.20247/ Thanks Bruno -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.alioth.debian.org/pipermail/nut-upsdev/attachments/20140603/f6c42819/attachment.html>

...25VA > Frequency Nominal 50Hz > Voltage 230.0V > Voltage Nominal 230V > Delay Shutdown 25s > Delay Start 40s > Firmware 02 > Load 23% > Power Nominal 1200VA > Status OL > > During a power outage it used to last for about 15 minutes and then > initiate the shutdown. however reviewing the logs of my systems: > > Apr 19 12:04:23 - OnBattery > Apr 19 12:10:21 - Power from UPS cut, all systems got suddenly powered off...

Hello, Problem: When I migrated from a DG965WH -> DP55KG motherboard, there were quite a bit of issues, host still does not reboot without special flags, e.g. reboot=a, the NIC driver is broken with the in-kernel version (the one on e1000.sourceforge) fixes that and finally my UPS USB has driver stale problems, with two issues already relating to the HW/drivers themselves it would not be

...hose Microsol nobreaks. What Douglas can do is to patch the solis executable in /usr/local/libexec/nut/solis inside freenas, with the patches that I have posted in the forum: This will work for FreeNAS last version 9.2.1.5. http://forums.freenas.org/index.php?threads/nobreak-bz1200-br-back-ups-rs-1200va-600w-bivolt-115-nt.20247/ *Instructions: * 1) Open the "*/usr/local/libexec/nut/solis*" executable in any hex editor 2) Search for the bytes 3D *A0* 00 00 00 75 8D 80 3D 77 11 21 00 FE 75 84 3) Change the "*A0*" to "*B0*" 4) Search for the bytes: *76* 29 BF A6 9C 40 0...

...any active threads on the mailing list > so I consider it everytime as an alternative, however those devices > are a bit pro/expensive too and they are harder to get/find support on > my country compared with other vendors. However feel free to suggest a > model like the Ellipse ECO 1200VA (in power and price). > > Also I found many reports of NUT working devices on the mailing list > which are not reported on the HCL > (https://networkupstools.org/stable-hcl.html) which makes me ask if > this list is maintained/updated as well as the acknowledges section > (htt...

Sorry, because this is not a technical question rather than a Hardware advice/recommendation. I have been using NUT-UPS perfectly for more than 7 years using two different Eaton/MGE models. After a battery replacement (replaced 1 year ago) after 5 years of service, my current unit seems to behave faulty, as just after 1-2 minutes of power outage, shows the LB battery flag and sets FSD although

Hi, My UPS is MGE Pulsar Ellipse Premium 1200VA, connected on USB port, usbhid-ups driver. Using simply KNotify about UPS connection states I noticed that sometimes unpredictably a notification appears that the USB connection to the UPS is lost and a few seconds later another notification appears that the connection is restored. And this repeat...

...ing Tripplite, I found many active threads on the mailing list so I consider it everytime as an alternative, however those devices are a bit pro/expensive too and they are harder to get/find support on my country compared with other vendors. However feel free to suggest a model like the Ellipse ECO 1200VA (in power and price). Also I found many reports of NUT working devices on the mailing list which are not reported on the HCL (https://networkupstools.org/stable-hcl.html) which makes me ask if this list is maintained/updated as well as the acknowledges section (https://networkupstools.org/acknowle...

...ing Tripplite, I found many active threads on the mailing list so I consider it everytime as an alternative, however those devices are a bit pro/expensive too and they are harder to get/find support on my country compared with other vendors. However feel free to suggest a model like the Ellipse ECO 1200VA (in power and price). >> >> Also I found many reports of NUT working devices on the mailing list which are not reported on the HCL (https://networkupstools.org/stable-hcl.html) which makes me ask if this list is maintained/updated as well as the acknowledges section (https://networkups...

Hi Everyone, I am new to UPSs and Linux.? I purchased a Belkin F6C750-AVR UPS for our church.? We are?running CENTOS 5.2. I tried the Linux Power Management Software that came with Belkin UPS with NO success. I installed the NUT software. After some experimentation I received some success with the megatec_usb Nut driver: [root at server bin]# /sbin/megatec_usb -u root -a serverups -DDDD

...0002 -v": http://bpa.ksu.pl/pub/lsusb.txt (28kB) "nutdrv_qx -a Viper1200 -DDDD" output (init): http://bpa.ksu.pl/pub/nutdrv_qx_start.txt (7kB) Supported command: UPS Information Command (I) 1.817212 send: I 1.817224 command index: 0x0c 2.008115 read: # 1200VA VER 1.00 UPS Rating Information (F) 2.239335 send: F 2.239347 command index: 0x0d 2.354142 read: #230.0 5.2 24.00 50.0 Status Inquiry (Q1) 2.008223 send: Q1 2.008233 command index: 0x03 2.239141 read: (226.2 226.2 226.2 0 50.0 27.7 25.0 00001001 beeper.toggle (Q)...