search for: 11mbps

I have a prism 2.5 firmaware 1.5.6 but I can't make work this in 11Mbps on Freebsd 5.1 but the same card work perfect in Freebsd 5.0 help pls! this is my ifconfig wi0:flags=8947<UP,BROADCAST,DEBUG,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500 ether 00:60:b3:7a:a3:1d media: IEEE 802.11 Wireless Ethernet DS/11Mbps <hostap> (DS/2Mbps <hosta...

...wi1: record read mismatch, rid=fd44, got=200 wi0: record read mismatch, rid=fd44, got=8650 no errors for the other pcmcia-card. The two cards-with-errors are running in managed mode: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 media: IEEE 802.11 Wireless Ethernet DS/11Mbps authmode OPEN privacy OFF bmiss 7 scanvalid 60 The pcmcia-card that does NOT generate errors is running in master mode: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 media: IEEE 802.11 Wireless Ethernet DS/11Mbps <hostap> (DS/2Mbps <hostap>) authmode OPEN...

...=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 inet6 fe80::20f:b5ff:fe20:71ed%ath0 prefixlen 64 scopeid 0x1 inet 192.168.132.146 netmask 0xffffff00 broadcast 192.168.132.255 ether 00:0f:b5:20:71:ed media: IEEE 802.11 Wireless Ethernet DS/11Mbps mode 11g status: associated ssid MYSSID channel 11 bssid 00:12:17:85:9a:3b authmode OPEN privacy OFF txpowmax 30 protmode CTS burst bintval 100 # ifconfig ath0 media DS/54Mbps ifconfig: unknown media subtype: DS/54Mbps # Any reason I can't bring...

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hello All, I have had a problem detecting the network card on my notebook when ACPI is enabled for a year. The problem still exists in 7.1-RELEASE. with ACPI: ... bge0: <Broadcom NetLink Gigabit Ethernet Controller, ASIC rev. 0xb002> irq 17 at device 0.0 on pci8 bge0: 0x10000 bytes of rid 0x10 res 3 failed (0, 0xffffffff). bge0: couldn't

...rver with winbind as the file server (I'll call this file server A). At the other location, I have samba 2.2.5 set up as a PDC and file server (I'll call this file server B). Both of these locations have DSL lines, and I'm going to set up a wireless network to save $80 a month. At 11mbps, I wouldn't want to run file server A over wireless. I would like to reconfigure file server B as a domain member with winbind. The authentication would take place over the wireless link. Now if the wireless link goes down for some reason, I could go to an XP box and log in, and it would...

...!! wireless card: prism II or Prism 2.5 (only xi325) firmware version: 1.4.9 or 1.5.6 ( not use 1.3.6 or 1.7.4) adapter: richo or PLX Freebsd Version: 5.0 setup; add: "OPTION BRIDGE" in your kernel in /etc/rc.conf add the line: ifconfig_wi0="inet up ssid NET2 channel 10 media DS/11Mbps mediaopt hostap" on /etc/sysctl.conf add: net.link.ether.bridge=1 net.link.ether.bridge_cfg="wi0:0, dc0:0" net.link.ether.bridge_ipfw=1 net.inet.ip.forwarding=1 Any information aditional, please send me an email We are trying to do this with freebsd 5.1 and the wireless stable but...

FreeBSD version: 5.1-RELEASE Hi, I'm quite new to FreeBSD. I've check list archives and read a handbook, but I didn't find solution to my problem and I hope this is not off-topic. I've installed 5.1-RELEASE, enabled ACLs on the filesystems and I wanted to test MAC features. I'm also new to MAC, so perhaps this is some my mistake. When I enable mac_biba or mac_lomac (in

...and things are misbehaving consistently. What else might I try? client end: Red Hat Linux release 7.2, P200mmx, 64MB ram, 128MB swap. rsync uses 6MB ram when running before it crashes, all ext3. rsync 2.5.6 from the rsync site, plain old configure, make, make install. 3c509 ethernet over a 11mbps 5.8ghz radio link that is rock solid. HP switches on both ends. [root@bht /]# /usr/local/bin/rsync -avvW --delete --exclude-from=/etc/rsync.exclude / root@10.0.0.5::bht.midcoast.com opening tcp connection to 10.0.0.5 port 873 building file list ... expand file_list to 4000 bytes, did move excludi...

I want to buy a laptop and install CentOS 4 on it and have the wifi work when I'm done. (Hoping for reasonable specs: 2GHz, 40GB drive, 1/2 to 1 GB RAM, CD-ROM, light and thin, 13 or 14 inch screen....) Any recommendations?

Hello, I''m trying to configure several wireless routers with QoS support. The idea is to implement differentiated services so that VoIP traffic gets the maximal priority, then video, control traffic, interactive data traffic and best-effort traffic. I have seen that CBQ used to be chosen as qdisc for implementing bandwith share in DiffServ but now HTB is preferred because it is

...discards lower 8 bit(s) Sep 20 15:40:31 rmbp kernel: Timecounter "TSC-low" frequency 10133485 Hz quality 1000 Sep 20 15:40:31 rmbp kernel: run0: MAC/BBP RT3070 (rev 0x0201), RF RT3020 (MIMO 1T1R), address 4c:e6:76:f1:f7:b1 Sep 20 15:40:31 rmbp kernel: run0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps Sep 20 15:40:31 rmbp kernel: run0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps Sep 20 15:40:31 rmbp kernel: Root mount waiting for: usbus1 Sep 20 15:40:31 rmbp kernel: ugen1.4: <vendor 0x0461> at usbus1 Sep 20 15:40:31 rmbp kernel: ums0: <ven...