search for: 0x81

Hi Charles, Running upsdrvctl -D start on the host with all three configured to SNMPv3 kicks out 56 different "unhandled ASN 0x81 from ..." lines on all three but importantly they all start up and keep running. I'm starting to suspect the startup is taking so long that systemd is timing out and killing it. time -p reports real time of 133.27. I'm not a fan of systemd but it's a thing I have to deal with. I...

...ile the other two are configured with SNMPv1. It doesn't matter which _one_ UPS is configured for SNMPv3 in ups.conf, they all work individually (see below example). However, if I configure any two or all three of them to use SNMPv3 then on startup upsdrvctl complains about "unhandled ASN 0x81 received from .1.3.6.1.4.1.318.1.1.1.9.3.3.1.7.1.1.3" and fails to start. My current [redacted] ups.conf follows. The only differences between the values are on the port and desc lines (ignoring #, of course). [ups1] desc = "APC Smart-UPS 5000 SNMP in rack 1 - AP9617" drive...

...web 10313 juniper Tue Nov 21 12:22:42 2006 Locked files: Pid Uid DenyMode Access R/W Oplock SharePath Name Time ---------------------------------------------------------------------------- ---------------------- 10313 6011 DENY_NONE 0x81 RDONLY NONE /home/web data/clients/canadians Tue Nov 21 12:35:35 2006 10295 6003 DENY_NONE 0x81 RDONLY NONE /home/web data/clients/quailelectronics Thu Nov 23 13:03:44 2006 10295 6003 DENY_NONE 0x81 RDONLY NONE /home/web data/cl...

...?????? bLength = 0x0007 ??????? bDescriptorType = 0x0005 ??????? bEndpointAddress = 0x0081? <IN> ??????? bmAttributes = 0x0003? <INTERRUPT> ??????? wMaxPacketSize = 0x0008 ??????? bInterval = 0x000c ??????? bRefresh = 0x0000 ??????? bSynchAddress = 0x0000 usbconfig -u 0 -a 5 do_request 0x81 0x06 0x2200 0 0x100 ?datanas: ~# usbconfig -u 0 -a 5 do_request 0x81 0x06 0x2200 0 0x100 REQUEST = <0x05 0x84 0x09 0x04 0xa1 0x01 0x09 0x24 0xa1 0x00 0x85 0x28 0x09 0xfe 0x79 0x01 0x75 0x08 0x95 0x01 0x15 0x00 0x26 0xff 0x00 0xb1 0x03 0x85 0x29 0x09 0xff 0x79 0x05 0xb1 0x03 0x85 0x2b 0x09 0xfd...

...[...] > bLength = 0x09 > bDescriptorType = 0x21 > bDescriptorSubType = 0x10 >> RAW dump: >> 0x00 | 0x09, 0x21, 0x10, 0x01, 0x21, 0x01, 0x22, 0x90, >> 0x08 | 0x02 > > This looks reasonable. > > What about this? > > usbconfig -u 4 -a 2 do_request 0x81 0x06 0x2200 0 0x100 > > One thing I noticed about the report descriptor that NUT returned: it has extra zero bytes. > > For instance, these lines: > > 0.157417 Report Descriptor: (656 bytes) => 05 00 84 00 09 00 04 00 a1 00 01 00 09 00 > 0.157431 24 00 a1 00 00 00 85 00...

...'' [...] unix`default_lock_delay+0x48 unix`mutex_vector_enter+0x99 zfs`dmu_zfetch_find+0x1f9 zfs`dmu_zfetch+0xc9 zfs`dbuf_read+0x27a zfs`dmu_buf_hold_array_by_dnode+0x287 zfs`dmu_buf_hold_array+0x81 zfs`dmu_read_uio+0x49 zfs`zfs_read+0x15e zfs`zfs_shim_read+0xc genunix`fop_read+0x31 genunix`read+0x188 unix`sys_syscall+0x17b 1861 unix`mutex_delay_default+0xc unix`mutex_v...

...445] [<ffffffff812ee517>] ? out_of_line_wait_on_bit+0x6b/0x77 Apr 29 11:01:18 node06 kernel: [2569440.616468] [<ffffffffa0fbe8ff>] ? ocfs2_inode_lock_full_nested+0x1a3/0xb2c [ocfs2] Apr 29 11:01:18 node06 kernel: [2569440.616497] [<ffffffffa0ffacc1>] ? ocfs2_lock_global_qf+0x28/0x81 [ocfs2] Apr 29 11:01:18 node06 kernel: [2569440.616519] [<ffffffffa0ffacc1>] ? ocfs2_lock_global_qf+0x28/0x81 [ocfs2] Apr 29 11:01:18 node06 kernel: [2569440.616540] [<ffffffffa0ffb3a3>] ? ocfs2_acquire_dquot+0x8d/0x105 [ocfs2] Apr 29 11:01:18 node06 kernel: [2569440.616557] [<fff...

Hi Everyone, I'm having trouble getting TrippLite SMX1500LCDT to work on FreeBSD 11.2, nut 2.7.4 installed from FreeBSD port. The debug output is rather big when I'm starting usbhid-ups initially, Please find that attached (gzipped to comply with message size limit). Subsequently, until I unplug and replug the USB cable, I'm geting a shorter debug output, like this: Network UPS

...ard 1 RX [ 0x2 0x1 0x1 0x37 0x90 0xc3 ] 6 bytes Aug 2 17:58:23 asterisk1 kernel: cwain: card 1 TX [ 0x2 0x1 0x1 0xef ] Aug 2 17:58:23 asterisk1 kernel: ztx 4 bytes Aug 2 17:58:28 asterisk1 kernel: cwain: card 1 TX [ 0x0 0x1 0x36 0xee 0x8 0x2 0x0 0x68 0x5 0x4 0x3 0x80 0x90 0xa3 0x18 0x3 0xa9 0x83 0x81 0x6c 0xc 0x41 0x81 0x32 0x31 0x33 0x31 0x36 0x36 0x35 0x31 0x33 0x34 0x70 0xc 0xc1 0x36 0x34 0x34 0x31 0x31 0x37 0x31 0x39 0x31 0x39 0x30 0xa1 ] Aug 2 17:58:28 asterisk1 kernel: ztx 48 bytes Aug 2 17:58:28 asterisk1 kernel: cwain: card 1 RX [ 0x0 0x1 0x1 0x38 0x11 0x2 ] 6 bytes Aug 2 17:58:28 as...

...Mediatrix 1204 is showed on the CLI: -- Executing SetCIDNum("SIP/2009-4df1", "1111") in new stack -- Executing Dial("SIP/2009-4df1", "SIP/2217008@192.168.199.5") in new stack Aug 11 15:14:10 WARNING[1211108144]: chan_sip.c:590 __sip_xmit: sip_xmit of 0x81 40c5c (len 794) to 192.168.199.5 returned -1: Operation not permitted -- Called 2217008@192.168.199.5 Aug 11 15:14:11 WARNING[1125350192]: chan_sip.c:590 __sip_xmit: sip_xmit of 0x81 40c5c (len 794) to 192.168.199.5 returned -1: Operation not permitted Aug 11 15:14:12 WARNING[1125350192]: chan_...

...bLength = 0x0007 bDescriptorType = 0x0005 bEndpointAddress = 0x0081 <IN> bmAttributes = 0x0003 <INTERRUPT> wMaxPacketSize = 0x0008 bInterval = 0x000c bRefresh = 0x0000 bSynchAddress = 0x0000 # usbconfig -u 1 -a 3 do_request 0x81 0x06 0x2200 0 0x100 REQUEST = <0x05 0x84 0x09 0x04 0xa1 0x01 0x09 0x24 0xa1 0x00 0x85 0x28 0x09 0xfe 0x79 0x01 0x75 0x08 0x95 0x01 0x15 0x00 0x26 0xff 0x00 0xb1 0x03 0x85 0x29 0x09 0xff 0x79 0x05 0xb1 0x03 0x85 0x2b 0x09 0xfd 0x79 0x03 0xb1 0x03 0x09 0x1a 0xa1 0x02 0x85 0x30 0x09 0x40 0x67 0x21...

...?????? bLength = 0x0007 ??????? bDescriptorType = 0x0005 ??????? bEndpointAddress = 0x0081? <IN> ??????? bmAttributes = 0x0003? <INTERRUPT> ??????? wMaxPacketSize = 0x0008 ??????? bInterval = 0x000c ??????? bRefresh = 0x0000 ??????? bSynchAddress = 0x0000 usbconfig -u 0 -a 5 do_request 0x81 0x06 0x2200 0 0x100 ?datanas: ~# usbconfig -u 0 -a 5 do_request 0x81 0x06 0x2200 0 0x100 REQUEST = <0x05 0x84 0x09 0x04 0xa1 0x01 0x09 0x24 0xa1 0x00 0x85 0x28 0x09 0xfe 0x79 0x01 0x75 0x08 0x95 0x01 0x15 0x00 0x26 0xff 0x00 0xb1 0x03 0x85 0x29 0x09 0xff 0x79 0x05 0xb1 0x03 0x85 0x2b 0x09 0xfd...

...bDescriptorType = 0x21 >> bDescriptorSubType = 0x10 >>> RAW dump: >>> 0x00 | 0x09, 0x21, 0x10, 0x01, 0x21, 0x01, 0x22, 0x90, >>> 0x08 | 0x02 >> >> This looks reasonable. >> >> What about this? >> >> usbconfig -u 4 -a 2 do_request 0x81 0x06 0x2200 0 0x100 >> >> One thing I noticed about the report descriptor that NUT returned: it has extra >> zero bytes. >> >> For instance, these lines: >> >> 0.157417 Report Descriptor: (656 bytes) => 05 00 84 00 09 00 04 00 a1 00 01 00 >> 09 00...

...[94201]: mainloop: Interrupted system call Mar 31 09:11:15 freenas kernel: <118>Mar 31 09:11:15 freenas upsmon[94217]: upsmon parent: read Mar 31 09:11:15 freenas notifier: Detected SU6000RT4UHVPM on host 192.168.0.24 (mib: ietf 1.4) Mar 31 09:11:17 freenas notifier: [tripplite] unhandled ASN 0x81 received from 1.3.6.1.2.1.33.1.2.6.0 Mar 31 09:11:17 freenas notifier: [tripplite] unhandled ASN 0x81 received from 1.3.6.1.2.1.33.1.3.3.1.4.1 Mar 31 09:11:17 freenas notifier: [tripplite] unhandled ASN 0x81 received from 1.3.6.1.2.1.33.1.3.3.1.5.1 Mar 31 09:11:19 freenas notifier: [tripplite] unha...

>> >> The output was also not as big as you made it out to be. > > Well, I didn't expect the driver to fail *that* badly :-) > > Assuming the UPS is still at /dev/ugen4.2, can you try the following command? (Probably needs to be run as root, with the driver stopped.) > > usbconfig -u 4 -a 2 dump_curr_config_desc Here is output of the command. Thank you for

On Mar 31, 2015, at 9:07 AM, Jason Gould <jgould at cddiagnostics.com> wrote: > I missed that snmp-ups set pollfreq to 30 by default. I?d hope that it would set deadtime to an appropriate value as well than, no? Is there a way to query what the settings are or what the defaults are? There is a TODO comment in snmp-ups that mentions doing something similar to usbhid-ups: just poll the

...R/W Oplock SharePath Name Time -------------------------------------------------------------------------------------------------- 24790 504 DENY_NONE 0x100081 RDONLY NONE /opt/srv007/app/mofis/datos . Mon Feb 9 18:00:34 2015 57686 504 DENY_NONE 0x81 RDONLY NONE /opt/srv007/app/publi/datos/dossiers . Tue Feb 10 10:10:59 2015 57686 504 DENY_NONE 0x81 RDONLY NONE /opt/srv007/app/publi/datos/dossiers . Tue Feb 10 10:10:59 2015 57686 504 DENY_NONE 0x100081 RDONLY NONE /opt/srv007/ap...

> What does that revision number correspond to in FreeBSD release numbers? (e.g. 9.3, 10.0) FreeBSD 10.2-RELEASE #0 r286738M the last person probably wasn't able to give the ./configure probably because most people uses the precompiled iso to install NAS4Free.? if you need the ./configure I might have to look for their source on GitHub or something. /usr/local/libexec/nut/usbhid-ups -a

...773722] #8 /opt/samba-3.0.23c/sbin/smbd(pdb_set_group_sid+0x77) [0x757643bd] #9 /opt/samba-3.0.23c/sbin/smbd(pdb_set_group_sid_from_rid+0xf5) [0x7576ff84] #10 /opt/samba-3.0.23c/sbin/smbd(init_sam_from_buffer_v3+0x99a) [0x757686cf] #11 /opt/samba-3.0.23c/sbin/smbd(pdb_copy_sam_account+0x81) [0x757694b4] #12 /opt/samba-3.0.23c/sbin/smbd(pdb_getsampwsid+0x10d) [0x7576ace0] #13 /opt/samba-3.0.23c/sbin/smbd [0x7576de0d] #14 /opt/samba-3.0.23c/sbin/smbd [0x7576d4d9] #15 /opt/samba-3.0.23c/sbin/smbd(pdb_sid_to_id+0x34) [0x7576cade] #16 /opt/samba-3.0.23c/sbin/smbd(sid_to_gid...

...orking examples I tried out: ... <interface type='hostdev' managed='yes'> <mac address='02:16:32:10:20:30'/> <driver name='xen'/> <source> <address type='pci' domain='0x0000' bus='0x81' slot='0x02' function='0x6'/> </source> <vlan> <tag id='11'/> </vlan> </interface> ... ... <hostdev mode='subsystem' type='pci' managed='yes'> <d...