search for: 0x09ae

...little tiny detail : ============================================================================== > --- trunk/scripts/hotplug/libhid.usermap (original) > +++ trunk/scripts/hotplug/libhid.usermap Fri Aug 25 19:18:19 2006 > @@ -21,5 +21,7 @@ > libhidups 0x0003 0x09ae 0x1003 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000 > # Belkin F6C800-UNV(usb) > libhidups 0x0003 0x050d 0x0980 0x0000 0x0000 0x00 0x00 0x00...

...se USB cable shipped with TrippLite and 'usbdevs -v' shows the following: ... Controller /dev/usb2: addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x0000), rev 1.00 port 1 powered port 2 addr 2: low speed, power 100 mA, config 1, TRIPP LITE UPS(0x2005), Tripp Lite(0x09ae), rev 0.10 ... According to http://www.networkupstools.org/compat/stable.html it looks like SMX1500LCD is supported (by usbhid-ups). However, whenever I try to start nut I see the following error: No matching HID UPS found Driver failed to start (exit status=1) Here is my ups.conf: [tripplite]...

...00RMXL2Ua TRIPP LITE> at usbus0, cfg=0 md=HOST spd=LOW (1.5Mbps) pwr=ON (60mA) bLength = 0x0012 bDescriptorType = 0x0001 bcdUSB = 0x0110 bDeviceClass = 0x0000 <Probed by interface class> bDeviceSubClass = 0x0000 bDeviceProtocol = 0x0000 bMaxPacketSize0 = 0x0008 idVendor = 0x09ae idProduct = 0x0001 bcdDevice = 0x0001 iManufacturer = 0x0001 <TRIPP LITE> iProduct = 0x0002 <TRIPP LITE SMART1500RMXL2Ua > iSerialNumber = 0x0000 <no string> bNumConfigurations = 0x0001 I swapped over to the tripplite_usb and it's still doing the same thing. #...

...evice 063: ID 09ae:3015 Tripp Lite Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 8 idVendor 0x09ae Tripp Lite idProduct 0x3015 bcdDevice 2.0a iManufacturer 2 Tripp Lite iProduct 3 TRIPP LITE SMART1500RM2UN iSerial 4 2424AY0SM882300229 bNumConfigurations 1 Configuration Descriptor: bLength 9 bD...

...evice 003: ID 09ae:0001 Tripp Lite Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 8 idVendor 0x09ae Tripp Lite idProduct 0x0001 bcdDevice 0.01 iManufacturer 1 TRIPP LITE iProduct 2 TRIPP LITE SMART3000RM2U iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType...

Hello NUT ! In order to fill info structure I'm putting in the drivers, I need to gather a lot of information. The information I need, at best, is : - For each USB UPS, the pair VendorID ProductID - For each pair Driver/UPS supported, how was made the driver ? By the manufacturer, by reverse engineering, ... - Who contributed to which driver - Who is the "maintener" of each driver

...ipp Lite TRIPP LITE UPS, class 0/0, rev 1.10/0.00, addr 2> on uhub0 using the usbdevs -v command: Controller /dev/usb0: addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), VIA(0x0000), rev 1.00 port 1 addr 2: low speed, self powered, config 1, TRIPP LITE UPS(0x4003), Tripp Lite(0x09ae), rev 0.00 I have tried usbhid-ups, tripplite_usb, and tripplite_esu with varying combinations of port, driver, and vendorid (4003 and 09ae). I have tried using -u root -DDDD nothing works, I have tried using the -x options, still fails. I really am at wits end on how to even get this thing workin...

...7: ID 09ae:2012 Tripp Lite Device Descriptor:   bLength                18   bDescriptorType         1   bcdUSB               1.10   bDeviceClass            0 (Defined at Interface level)   bDeviceSubClass         0   bDeviceProtocol         0   bMaxPacketSize0         8   idVendor           0x09ae Tripp Lite   idProduct          0x2012   bcdDevice            0.09   iManufacturer           1 Tripp Lite   iProduct                2 Tripp Lite UPS   iSerial                 0   bNumConfigurations      1   Configuration Descriptor:     bLength                 9     bDescriptorType        ...

...P LITE UPS Tripp Lite> at usbus0, cfg=0 md=HOST spd=LOW (1.5Mbps) pwr=ON (100mA)? bLength = 0x0012 ? bDescriptorType = 0x0001 ? bcdUSB = 0x0110 ? bDeviceClass = 0x0000? <Probed by interface class> ? bDeviceSubClass = 0x0000 ? bDeviceProtocol = 0x0000 ? bMaxPacketSize0 = 0x0008 ? idVendor = 0x09ae ? idProduct = 0x3016 ? bcdDevice = 0x0002 ? iManufacturer = 0x0003? <retrieving string failed> ? iProduct = 0x0001? <TRIPP LITE UPS> ? iSerialNumber = 0x0005? <retrieving string failed> ? bNumConfigurations = 0x0001 usbconfig -u 0 -a 5 dump_curr_config_desc ?datanas: ~# usbconfig...

...nel: uhid0: Tripp Lite TRIPP LITE UPS, rev 1.10/0.10, addr 2, iclass 3/0 $ sudo usbdevs -d -v Controller /dev/usb0: addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), VIA(0x0000), rev 1.00 uhub0 port 1 addr 2: low speed, power 100 mA, config 1, TRIPP LITE UPS(0x2007), Tripp Lite(0x09ae), rev 0.10 uhid0 [snip] $ nocomment ups.conf [tripplite-g1000u] driver = usbhid-ups port = auto desc = "primary UPS" $ nocomment upsd.conf ACL all 0.0.0.0/0 ACL localhost 127.0.0.1/32 ACL lan [redacted] ACCEPT localhost lan REJECT all Any help appreciated, especially if...

...00RMXL2Ua TRIPP LITE> at usbus0, cfg=0 md=HOST spd=LOW (1.5Mbps) pwr=ON (60mA) bLength = 0x0012 bDescriptorType = 0x0001 bcdUSB = 0x0110 bDeviceClass = 0x0000 <Probed by interface class> bDeviceSubClass = 0x0000 bDeviceProtocol = 0x0000 bMaxPacketSize0 = 0x0008 idVendor = 0x09ae idProduct = 0x0001 bcdDevice = 0x0001 iManufacturer = 0x0001 <TRIPP LITE> iProduct = 0x0002 <TRIPP LITE SMART1500RMXL2Ua > iSerialNumber = 0x0000 <no string> bNumConfigurations = 0x0001 I swapped over to the tripplite_usb and it's still doing the same thing. #...

...2: ID 09ae:0001 Tripp Lite Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 8 idVendor 0x09ae Tripp Lite idProduct 0x0001 bcdDevice 0.01 iManufacturer 1 iProduct 2 iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength...

...evice 002: ID 09ae:0001 Tripp Lite Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 8 idVendor 0x09ae Tripp Lite idProduct 0x0001 bcdDevice 0.01 iManufacturer 1 TRIPP LITE iProduct 2 TRIPP LITE SMART550USB iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType...

...ptor: > bLength 18 > bDescriptorType 1 > bcdUSB 1.10 > bDeviceClass 0 (Defined at Interface level) > bDeviceSubClass 0 > bDeviceProtocol 0 > bMaxPacketSize0 8 > idVendor 0x09ae Tripp Lite > idProduct 0x1003 > bcdDevice 0.10 > iManufacturer 3 Tripp Lite > iProduct 1 TRIPP LITE UPS > iSerial 2 692186 A > bNumConfigurations 1 > Configuration Descriptor: > bLeng...

...0x00 0x00 0x00 0x00000000 # Powerware USB libhidups 0x0003 0x0592 0x0002 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000 # Tripp Lite libhidups 0x0003 0x09ae 0x0001 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00 0x00 0x00000000 I've been playing with this for most of the afternoon but I'm out of ideas. Any and all suggestions are greatly appreciated! Cheers, Randall

Hello everyone, I have a Tripp-Lite UPS (smart1500rmxl2ua) I'm trying to get working with nut. This is a FreeBSD 10.3 box. I've tried using the usbhid-ups<http://networkupstools.org/docs/man/usbhid-ups.html> driver but everytime I try to start up nut, I get this: # upsdrvctl start Network UPS Tools - UPS driver controller 2.7.4 Network UPS Tools - Generic HID driver 0.41 (2.7.4)

Installed a new Tripplite Smart1500LCD on a CentOS 7 host using the usb connector. Nut does connect: $upsc ups battery.charge: 100 battery.runtime: 1407 battery.type: PbAC ... But after a half hour or so the connection is lost. Restarting nut re-establishes the connection. Any idea what might be causing the dissconnection?

...evice 013: ID 09ae:2005 Tripp Lite Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 8 idVendor 0x09ae Tripp Lite idProduct 0x2005 bcdDevice 0.10 iManufacturer 3 Tripp Lite iProduct 1 TRIPP LITE UPS iSerial 2 692195 B bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType...

On Sep 22, 2014, at 11:14 AM, Shade Alabsa <shade34321 at gmail.com> wrote: > These machines are exact replicas of each other and are fairly old and have a Core 2 Duo E8400 CPU in them. Is there anything else you need or anything I can do to help fix this? Thanks! Also, Barry Skrypnyk mentioned that Fedora was one of the Linux distributions that Tripp Lite claims to support. I recommend

...5.000000 > Path: UPS.ffff0015.00ff0001.ffff00c3, Type: Feature, Value: 255.000000 > Path: UPS.ffff0015.00ff0001.ffff00c5, Type: Feature, Value: 2.000000 > Can't retrieve Report 154 (-32/32): Broken pipe > Path: UPS.ffff0015.00ff0001.ffff00c4, Type: Feature > entering identify_ups(0x09ae, 0x1003) > > upsdrv_updateinfo... > dstate_init: sock /var/state/ups/newhidups-auto open on fd 5 > upsdrv_updateinfo... > Waiting for notifications... > > =>Got 1 HID Objects... > find_hid_info: unknown variable: UPS.PowerSummary.RemainingCapacity > > upsdrv_upda...