search for: 0x0005

...erboard is ASUS P5N32-SLI, using onboard sound Radeon X300SE PCI-E graphics card Power-on boot from the install CD also hung, at "running /sbin/loader" but rebooted correctly into the installer after the reset button was pressed. Error dump from dmesg: Evaluate _OSC Set fails. Status = 0x0005 ACPI-1133: *** Error: Method execution failed [\_SB_.LSTA] (Node f7f5ff00), AE_AML_OPERAND_TYPE ACPI-1133: *** Error: Method execution failed [\_SB_.LATA._STA] (Node f7f001e0), AE_AML_OPERAND_TYPE ACPI-0158: *** Error: Method execution failed [\_SB_.LATA._STA] (Node f7f001e0), AE_AML_OP...

...packets for QoS and its working, I now want to set some bits (OR) at the end of the mark. For example, I want to use 0x8000 to add another mark to the packet for routing. The packet is market yet with a QoS mark (--set-mark), 0x5 (for example). I need: 1) The packet been marked with 0x8000 OR 0x0005 = 0x8005 2) Route the packet with 0x8005 AND 0x8000 = 0x8000 over wan0 (for example) 3) Classify the packet with 0x8005 AND 0x0005 into wan0 1:4 class (for example) I know how to do this not having sense about MASKs, but ... Could anybody put here how to do it with them? Another question: W...

...ID 0583:2032) trace:dinput:joydev_create_deviceA 0x35ce3f8 {9e573ed9-7734-0000-8d4 a-23903fb6bdf7} (nil) 0x32f0f8 trace:dinput:JoystickAImpl_GetCapabilities 0x2029b0->(0x32f114) trace:dinput:JoystickAImpl_GetDeviceInfo (0x2029b0,0x32f37c) trace:dinput:JoystickAImpl_SetProperty (0x2029b0,<guid-0x0005>,0x32f 0b0) trace:dinput:JoystickAImpl_SetProperty deadzone(0) obj=0 trace:dinput:JoystickAImpl_SetProperty (0x2029b0,<guid-0x000a>,0x32f 0b0) trace:dinput:JoystickAImpl_GetProperty (0x2029b0,<guid-0x0004>,0x32f 0c4) trace:dinput:JoystickAImpl_GetProperty range(0, 65535) obj=0 trace:...

...811xxxx|60|T") in new stack -- data = 60039141:01708112001 -- capi request omsn = 60039141 == found capi with omsn = 60039141 == CAPI Call CAPI[contr1/60039141]/1 -- creating pipe for PLCI=-1 > sent CONNECT_REQ MN =0x5 -- Called 60039141:01708112001 -- CONNECT_CONF ID=001 #0x0005 LEN=0014 Controller/PLCI/NCCI = 0x101 Info = 0x0 -- CONNECT_CONF ID=001 #0x0005 LEN=0014 Controller/PLCI/NCCI = 0x101 Info = 0x0 == received CONNECT_CONF PLCI = 0x101 INFO = 0 -- DISCONNECT_IND ID=001 #0x0019 LEN=0014...

...Solaris 8/Sparc, Compiler: Forte 6 Update 2 suggested fix: --- modules/CP437.c Fri Aug 29 17:11:23 2003 +++ modules/CP437.c.orig Fri Aug 29 17:27:09 2003 @@ -24,261 +24,261 @@ #include "includes.h" static const uint16 to_ucs2[256] = { - 0x0001, - 0x0002, - 0x0003, - 0x0004, - 0x0005, - 0x0006, - 0x0007, - 0x0008, - 0x0009, - 0x000A, - 0x000B, - 0x000C, - 0x000D, - 0x000E, - 0x000F, - 0x0010, - 0x0011, - 0x0012, - 0x0013, - 0x0014, - 0x0015, - 0x0016, - 0x0017, - 0x0018, - 0x0019, - 0x001A, - 0x001B, - 0x001C, - 0x001D, - 0x001E, - 0x001F, - 0x0020, -...

...CCESS-DENIED] 0.031200 Current power value: 1 0.046800 Minimum power value: 1 5.054409 pollups: upsa at 192.168.10.200 5.054409 get_var: upsa at 192.168.10.200 / status 5.054409 Poll UPS [upsa at 192.168.10.200] failed - Data stale 5.070009 do_notify: ntype 0x0005 (COMMBAD) 5.070009 Communications with UPS upsa at 192.168.10.200 lost 5.085609 Current power value: 1 5.085609 Minimum power value: 1 10.097895 pollups: upsa at 192.168.10.200 10.097895 get_var: upsa at 192.168.10.200 / status 10.097895 Poll UPS [upsa at 192....

Can we please add this UPS? idVendor 0x0764 Cyber Power System, Inc. idProduct 0x0005 Cyber Power UPS Rob -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.alioth.debian.org/pipermail/nut-upsuser/attachments/20150917/0774f0a4/attachment.html>

...or should I be as clever as to know what a reason 0x3302 is? What is this debug for if I can't interpret it? Kind regards, Victor. >From capi debug: == CAPI Call CAPI[contr1/number]/1 -- creating pipe for PLCI=-1 > sent CONNECT_REQ MN =0x5 -- CONNECT_CONF ID=002 #0x0005 LEN=0014 Controller/PLCI/NCCI = 0x101 Info = 0x0 -- CONNECT_CONF ID=002 #0x0005 LEN=0014 Controller/PLCI/NCCI = 0x101 Info = 0x0 == received CONNECT_CONF PLCI = 0x101 INFO = 0 -- Called @number:number...

...is the message I receive from the Debug: rounoff:/var/run/nut# upsmon -D Network UPS Tools upsmon 2.0.2 UPS: bup@localhost (master) (power value 1) Using power down flag file /etc/killpower Trying to connect to UPS [bup@localhost] UPS [bup@localhost]: connect failed: No such host do_notify: ntype 0x0005 (COMMBAD) Communications with UPS bup@localhost lost I found that if I put the -p it work but i'm not sure of what that's implying. Any clues of how to fix that problem ? Where to look? Thanks in advance -- Mathieu Bruneau aka ROunofF === GPG keys available @ http://rounoff.darktech.or...

...Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000b 100 100 060 Pre-fail Always - 0 2 Throughput_Performance 0x0005 100 100 050 Pre-fail Offline - 0 3 Spin_Up_Time 0x0007 115 115 024 Pre-fail Always - 188 (Average 194) 4 Start_Stop_Count 0x0012 099 099 000 Old_age Always - 4026 5 Reallocated_Sector_Ct 0x0033 100 100...

...ibutes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0 2 Throughput_Performance 0x0005 133 133 054 Pre-fail Offline - 138 3 Spin_Up_Time 0x0007 142 142 024 Pre-fail Always - 178 (Average 109) 4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 120 5 Reallocated_Sector_Ct 0x0033 100 100 00...

...t as (loading the module with debug=1) Setting up DMA (write/read = 321b2000/321b2200) Controller version: 43 Framer: DS21554, Revision: 5 (E1) Found a Wildcard: Digium Wildcard E100P E1/PRA Using CCS/HDB3 coding/framing with CRC4 120 Ohms Calling startup (flags is 4099) Started DMA Got interrupt: 0x0005 /etc/zaptel.conf: span=1,1,0,ccs,hdb3,crc4 bchan=1-15,17-31 dchan=16 /etc/asterisk/zapata.conf: [channels] context=default switchtype=euroisdn signalling=pri_net group=1 channel => 1-31 asterix fails with: Aug 3 00:59:23 ERROR[16384]: chan_zap.c:5352 mkintf: Signalling requested is PRI Si...

...utput: ugen1.3: <USB UPS PPC> at usbus1, cfg=0 md=HOST spd=LOW (1.5Mbps) pwr=ON bLength = 0x0012 bDescriptorType = 0x0001 bcdUSB = 0x0200 bDeviceClass = 0x0000 bDeviceSubClass = 0x0000 bDeviceProtocol = 0x0000 bMaxPacketSize0 = 0x0008 idVendor = 0x06da idProduct = 0x0005 bcdDevice = 0x0003 iManufacturer = 0x0003 <PPC> iProduct = 0x0001 <USB UPS> iSerialNumber = 0x0000 <no string> bNumConfigurations = 0x0001 I am running all the ups programs as root, i.e. "ps -aux" shows: root 39901 0.0 0.0 22388 3860 ?? Is 1...

...? <Probed by interface class> ? bDeviceSubClass = 0x0000 ? bDeviceProtocol = 0x0000 ? bMaxPacketSize0 = 0x0008 ? idVendor = 0x09ae ? idProduct = 0x3016 ? bcdDevice = 0x0002 ? iManufacturer = 0x0003? <retrieving string failed> ? iProduct = 0x0001? <TRIPP LITE UPS> ? iSerialNumber = 0x0005? <retrieving string failed> ? bNumConfigurations = 0x0001 usbconfig -u 0 -a 5 dump_curr_config_desc ?datanas: ~# usbconfig -u 0 -a 5 dump_curr_config_desc ugen0.5: <TRIPP LITE UPS Tripp Lite> at usbus0, cfg=0 md=HOST spd=LOW (1.5Mbps) pwr=ON (100mA) ?Configuration index 0??? bLength =...

Hi all, After client's certificate verifications discussion in the mailing-list, I have done some tests with nut trunk and - if my config is not too bad - I think ther is a bug with server certificate verification. With a clean trunk checkout, compile and installation; and with the following config : upsmon.conf: CERTPATH /usr/local/ups/etc/cert/ CERTVERIFY 1 FORCESSL 1 Upsd.conf: CERTFILE

...er/PLCI/NCCI = 0x101 ConnectedNumber = <00 a3> ConnectedSubaddress = default LLC = default CONNECT_ACTIVE_RESP ID=002 #0x03eb LEN=0012 Controller/PLCI/NCCI = 0x101 CONNECT_B3_REQ ID=002 #0x0005 LEN=0013 Controller/PLCI/NCCI = 0x101 NCPI = default -- ISDN1#02: sent CONNECT_B3_REQ PLCI=0x101 CAPI: ApplId=0x0002 Command=0x82 SubCommand=0x81 MsgNum=0x0005 NCCI=0x00010101 CONNECT_B3_CONF ID=002 #0x0005 LEN=0014 Controller/PLCI/NCCI...

On Feb 4, 2014, at 9:05 AM, Chris Duffy wrote: > ugen1.3: <USB UPS PPC> at usbus1, cfg=0 md=HOST spd=LOW (1.5Mbps) pwr=ON [...] > idVendor = 0x06da > idProduct = 0x0005 This VID:PID combination should be handled by blazer_usb. In NUT 2.7.1 and later, this would be covered by nutdrv_qx as well. > I am running all the ups programs as root, i.e. "ps -aux" shows: > > root 39901 0.0 0.0 22388 3860 ?? Is 12:57AM 0:00.00 /usr/local/bin...

----- On Sep 23, 2015, at 9:26 AM, Charles Lepple clepple at gmail.com wrote: > On Sep 23, 2015, at 9:22 AM, Louis G. <louis at frentzgzesh.info> wrote: >> >> >Can you open up a root shell, kill the old `usbhid-ups` process, and run it from >> >the command line? >> > >> > /usr/local/libexec/nut/usbhid-ups -a ups -DDD >> > >>

...Global Report ID(0x0002) Local Usage(0x00ff) Local String Index(0x0002) Feature/2 Global Report ID(0x0003) Global Usage Page(0x0085) Local Usage(0x0089) Local String Index(0x0004) Feature/3 Global Report ID(0x0004) Local Usage(0x008f) Local String Index(0x0003) Feature/4 Global Report ID(0x0005) Local Usage(0x008b) Feature/5 Global Report ID(0x0006) Global Usage Page(0xff86) Local Usage(0x0060) Input/6 Local Usage(0x0060) Feature/6 Global Report ID(0x0007) Global Usage Page(0x0085) Local Usage(0x0085) Global Report Size(0x0010) Global Logical Maximum(0xffff) Feature/7 Global Re...

...Result with RSSI (0x22) plen 15 > HCI Event: Inquiry Result with RSSI (0x22) plen 15 > HCI Event: Inquiry Result with RSSI (0x22) plen 15 > HCI Event: Inquiry Result with RSSI (0x22) plen 15 > HCI Event: Inquiry Complete (0x01) plen 1 (connect) < HCI Command: Create Connection (0x01|0x0005) plen 13 > HCI Event: Command Status (0x0f) plen 4 > HCI Event: Connect Complete (0x03) plen 11 < HCI Command: Read Remote Supported Features (0x01|0x001b) plen 2 > HCI Event: Command Status (0x0f) plen 4 < HCI Command: Write Link Policy Settings (0x02|0x000d) plen 4 > HCI Event:...