search for: 03f0

...support USB, else ignore +# newer hiddev are part of the usbmisc class SUBSYSTEM=="usbmisc", GOTO="up_hid_chkdev" +# only support USB, else ignore SUBSYSTEM!="usb", GOTO="up_hid_end" # if usbraw device, ignore @@ -17,21 +20,31 @@ ATTRS{idVendor}=="03f0", ENV{UPOWER_VENDOR}="Hewlett Packard" ATTRS{idVendor}=="0463", ENV{UPOWER_VENDOR}="Eaton" ATTRS{idVendor}=="047c", ENV{UPOWER_VENDOR}="Dell" +ATTRS{idVendor}=="04d8", ENV{UPOWER_VENDOR}="Minibox" ATTRS{idVendor}=="0...

Has anyone had any success with the HP T/R2200 G2? I have used the T/R2200 with nut a few times before and it works great, but the G2 doesn't want to talk to me. I have tried bcmxcp from 2.0.4, 2.2.2, and svn, as well as the usb drivers. Maybe the G2 isn't a rebadged powerware unit? Thanks James

Has anyone had any success with the HP T/R2200 G2? I have used the T/R2200 with nut a few times before and it works great, but the G2 doesn't want to talk to me. I have tried bcmxcp from 2.0.4, 2.2.2, and svn, as well as the usb drivers. Maybe the G2 isn't a rebadged powerware unit? Thanks James

Hi Please could someone assist me? I?e got a 3g usb dongle - Huawei E1552. [root@]# lsusb Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 002: ID 03f0:8407 Hewlett-Packard Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 002: ID 413...

...installed xsane-gimp.x86_64 0.991-5.el5 installed doesn't recognize that there is a scanner out there and only loads the interface for my old ScanJet 3300C: [mar at marichter ~]$ lsusb Bus 001 Device 001: ID 0000:0000 Bus 002 Device 012: ID 03f0:0205 Hewlett-Packard ScanJet 3300c Bus 002 Device 006: ID 04f9:0033 Brother Industries, Ltd Bus 002 Device 001: ID 0000:0000 In fact, the new scanner doesn't even show up unless: [mar at marichter ~]$ sudo lsusb [sudo] password for mar: Bus 001 Device 001: ID 0000:0000 Bus 002 Device 015: ID...

Hello all, First the easy bit, using the info in these mailing lists in respect of HP T750 here is the info for the T1000: Checking device (03F0/1F08) (003/006) FCC no of 5WSUSA-33229-XP-E , suggest it is a tripplite Added the T1000 info to tripplite-hid.c as described recompiled and works fine, thank you. Which driver should I use if I want to connect via the serial port? I am using the usbhid-ups driver via usb at present. Next, woul...

...ing the drivers directly for testing, and specifying '-u root' to > make sure that permissions aren't an issue. An strace shows no access > denied type errors. > > > > One more thing... if it helps, the usb info is: > > > > > > Bus 003 Device 003: ID 03f0:1f0a Hewlett-Packard > > > > What does 'lsusb -vvv -d 03f0:1f0a' return? > > > > Attached. > > The source code definitely makes no reference to that vendorid or > productid that I can see. > > I did try the '-x explore' with the usbhid-ups d...

...t; 0.80, so I hauled down 0.83, built it and installed it and that didn't seem to help. I will try that when I have a few minutes to take the system down again, but in the mean time, can anyone hazard a guess at what's wrong? $ lsusb Bus 001 Device 001: ID 0000:0000 Bus 002 Device 006: ID 03f0:3112 Hewlett-Packard Bus 002 Device 004: ID 22b8:2ac2 Motorola PCS Bus 002 Device 001: ID 0000:0000 Bus 002 Device 002: ID 04f9:0033 Brother Industries, Ltd Bus 002 Device 003: ID 03f0:0205 Hewlett-Packard ScanJet 3300c It's Bus 2, Dev 6. There is nothing in any of the /var/log/* files to ind...

I got HP T1000 INTL UPS to work with NUT. Looks like it is more or less equal to HP T750 INTL. I have only tested USB, not serial.

...-2263 E - Bus: 002 Trying to match device Device does not match - skipping Checking device (0000/0000) (002/001) - VendorID: 0000 - ProductID: 0000 - Manufacturer: unknown - Product: unknown - Serial Number: unknown - Bus: 002 Trying to match device Device does not match - skipping Checking device (03F0/2224) (001/003) - VendorID: 03f0 - ProductID: 2224 - Manufacturer: unknown - Product: unknown - Serial Number: unknown - Bus: 001 Trying to match device Device does not match - skipping Checking device (0000/0000) (001/001) - VendorID: 0000 - ProductID: 0000 - Manufacturer: unknown - Product: unkno...

...I can''t find it anymore...). The first port, 5-2, is the one to which the printer is connected. After the DomU has booted, I issue "xm list-usb domu" on Dom0, which gives me: Idx BE state usb-ver BE-path 0 0 1 USB2.0 /local/domain/0/backend/vusb/14/0 port 1: 5-2 [ID 03f0:5511 HP Deskjet F300 series] port 2: 5-3 So far, so good. The Dom0 seems to hand the printer to the DomU. However, DomU doesn''t seem to notice anything. When I do "lsusb" on it, it bails out with: unable to initialize libusb: -99 Manually loading the usbcore module and its fri...

Hi, I own a UPS HP T750. Is there a driver for this UPS (either serial or USB)? thx kp

...k this all the time <g>): Module Size Used by usbhid 32992 0 usblp 12032 0 ehci_hcd 38344 0 ohci_hcd 26372 0 lsusb shows that the tripp lite is seen on the usb bus: Bus 003 Device 029: ID 03f0:1017 Hewlett-Packard Bus 003 Device 028: ID 0409:0058 NEC Corp. HighSpeed Hub Bus 003 Device 015: ID 09ae:0001 Tripp Lite Bus 003 Device 003: ID 0409:0058 NEC Corp. HighSpeed Hub Bus 003 Device 001: ID 0000:0000 Bus 002 Device 001: ID 0000:0000 Bus 001 Device 001: ID 0000:0000 a...

...ups.load: 0 ups.load.nominal: 80 ups.mfr: Hewlett-Packard ups.model: HP R1500 G3 UPS ups.power: 0.0 ups.power.nominal: 1500 ups.productid: 1fe0 ups.serial: XXXXXXXXXX ups.status: OL CHRG ups.test.result: No test initiated ups.timer.reboot: -1 ups.timer.shutdown: -1 ups.timer.start: -1 ups.vendorid: 03f0 % upsc hp1500 server.version 2.6.4 % upsrw hp1500 [battery.charge.low] Remaining battery level when UPS switches to LB (percent) Type: STRING Value: 20 [input.transfer.high] High voltage transfer point (V) Type: STRING Value: 266.0 [input.transfer.low] Low voltage transfer point (V) Type: STRIN...

Hi I would like to be able to use this UPS with NUT please ? Product id = 53962KX Network UPS Tools - Generic HID driver 0.38 (2.7.2) USB communication driver 0.32 0.000000 debug level is '2' 0.002761 upsdrv_initups... 0.014996 Checking device (03F0/0024) (001/005) 0.032670 - VendorID: 03f0 0.032790 - ProductID: 0024 0.032955 - Manufacturer: CHICONY 0.033204 - Product: HP Basic USB Keyboard 0.033839 - Serial Number: unknown 0.034200 - Bus: 001 0.034352 Trying to match device 0.034840 Devi...

Apparently I hadn't done any scanning since my move to centos. hp-scan works for root, but not for me as me. When I try to use xsane, it tells me no device found. When I try to use hp-scan as myself it tells me: error: Unable to locate device hpaio:/usb/Photosmart_C3100_series?serial=CN6ARC321S04KV using SANE backend hpaio:. Please check HPLIP installation. What do I change to make it let me

...ng device (045E/00CB) (002/004) 0.025117 - VendorID: 045e 0.025122 - ProductID: 00cb 0.025127 - Manufacturer: unknown 0.025132 - Product: unknown 0.025138 - Serial Number: unknown 0.025143 - Bus: 002 0.025148 Trying to match device 0.025153 Device does not match - skipping 0.025162 Checking device (03F0/0324) (002/003) 0.025179 - VendorID: 03f0 0.025185 - ProductID: 0324 0.025190 - Manufacturer: unknown 0.025195 - Product: unknown 0.025200 - Serial Number: unknown 0.025205 - Bus: 002 0.025210 Trying to match device 0.025217 Device does not match - skipping 0.025225 Checking device (8087/8000) (002...

Hi, I bought a Belkin Active Battery Backup UPS (http://www.belkin.com/uk/activebattery/) yesterday with a USB port and hoped it would work with nut. The device will show up in /proc/bus/usb/devices as a Cypress Semiconductor USB to Serial. It creates /dev/hiddev0 (and this disappears when the UPS is unplugged). I've tried using belkin, belkinunv, usbhid-ups and megatec_usb. I've tried

...oaded correctly, I have to create /dev/lp0 manually after every reboot! I tried with MAKEDEV but with no success. What''s the right procedure? Shouldn''t it be already there?). Sadly I cannot make the second USB printer work! I configured the guest with: usbdevice= [ ''host:03f0:1c17'' ] , made sure usblp and such are NOT loaded on dom0, but it won''t work! I tried loading usb modules, but /proc/bus/usb is still empty. Should I see the device with lsusb on the guest? Thanks maxxer -- Lorenzo Milesi - lorenzo.milesi@yetopen.it YetOpen S.r.l. - http://www...

...stick. Reading a lot of docs about, some say about support of usb 1.1 to easy just add to settings in my config file, I had done this, windows 7 show the usb devices but wont show me any drive in the disk manager. Do I need to do something else? Thanks!!! usb = 1 usbdevice = [ ''host:03f0:3307'' ] _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users