thr3ads.net - samba - [Samba] No DNS domain configured [Sep 2020]

If this information is useful, please help other people find it:
Share via:

L.P.H. van Belle

2020-Sep-07 07:02 UTC

[Samba] No DNS domain configured

See below, basicly what now happend is. 
This one line : 
> 127.0.1.1	gaia.rompen.local	gaia   	<<<< CHANGE THIS  
Is what is your problem. 

Read throught the settings, you need a few changes. 
Its mostly good. 

After the changes, reboot the AD-DC. 
Then after its rebooted and after the changes for the member, reboot that also.

Then is should be ok. 

Greetz, 

Louis

> -----Oorspronkelijk bericht-----
> Van: samba [mailto:samba-bounces at lists.samba.org] Namens 
> Philip Offermans via samba
> Verzonden: vrijdag 4 september 2020 17:59
> Aan: Rowland penny
> CC: sambalist
> Onderwerp: Re: [Samba] No DNS domain configured
> 
> Hi sorry for the late reaction. I had no access to my test 
> setup here is the debug:
> 
> Gaia:
> Collected config  --- 2020-09-04-17:56 -----------
> 
> Hostname: gaia
> DNS Domain: rompen.local
> FQDN: gaia.rompen.local
> ipaddress: 192.168.88.2 
> 
> -----------
> 
> Kerberos SRV _kerberos._tcp.rompen.local record verified ok, 
> sample output: 
> Server:		192.168.88.2
> Address:	192.168.88.2#53
> 
> _kerberos._tcp.rompen.local	service = 0 100 88 gaia.rompen.local.
> Samba is running as an AD DC
> 
> -----------
>        Checking file: /etc/os-release
> 
> PRETTY_NAME="Raspbian GNU/Linux 10 (buster)"
> NAME="Raspbian GNU/Linux"
> VERSION_ID="10"
> VERSION="10 (buster)"
> VERSION_CODENAME=buster
> ID=raspbian
> ID_LIKE=debian
> HOME_URL="http://www.raspbian.org/"
> SUPPORT_URL="http://www.raspbian.org/RaspbianForums"
> BUG_REPORT_URL="http://www.raspbian.org/RaspbianBugs"
> 
> -----------
> 
> 
> This computer is running Debian 10.4 armv7l
> 
> -----------
> running command : ip a
> 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state 
> UNKNOWN group default qlen 1000
>     link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
>     inet 127.0.0.1/8 scope host lo
>     inet6 ::1/128 scope host 
> 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc 
> pfifo_fast state UP group default qlen 1000
>     link/ether b8:27:eb:7f:ad:98 brd ff:ff:ff:ff:ff:ff
>     inet 192.168.88.2/24 brd 192.168.88.255 scope global 
> dynamic noprefixroute eth0
>        valid_lft 544sec preferred_lft 469sec
>     inet6 fe80::bbbd:eb9b:bce9:b088/64 scope link 
> 3: wlan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state 
> DOWN group default qlen 1000
>     link/ether b8:27:eb:2a:f8:cd brd ff:ff:ff:ff:ff:ff
> 
> -----------
>        Checking file: /etc/hosts
> 
> 127.0.0.1	localhost
> ::1		localhost ip6-localhost ip6-loopback
> ff02::1		ip6-allnodes
> ff02::2		ip6-allrouters
> 
> 127.0.1.1	gaia.rompen.local	gaia   	<<<< CHANGE THIS 192.168.88.2 gaia.rompen.local	gaia   	<<<< TO THIS
> 
> -----------
> 
>        Checking file: /etc/resolv.conf
> 
> # Generated by resolvconf
> search rompen.local
> nameserver 192.168.88.2
> 
> -----------
> 
>        Checking file: /etc/krb5.conf
> 
> [libdefaults]
> 	default_realm = ROMPEN.LOCAL
> 	dns_lookup_realm = false
> 	dns_lookup_kdc = true
> 
> -----------
> 
>        Checking file: /etc/nsswitch.conf
> 
> # /etc/nsswitch.conf
> #
> # Example configuration of GNU Name Service Switch functionality.
> # If you have the `glibc-doc-reference' and `info' packages 
> installed, try:
> # `info libc "Name Service Switch"' for information about
this file.
> 
> passwd:         files
> group:          files
> shadow:         files
> gshadow:        files
> 
> hosts:          files mdns4_minimal [NOTFOUND=return] dns  <<<
CHANGE THIS
> hosts:          files dns mdns4_minimal [NOTFOUND=return]  <<< TO
THIS
> networks:       files
> 
> protocols:      db files
> services:       db files
> ethers:         db files
> rpc:            db files
> 
> netgroup:       nis
> 
> -----------
> 
>        Checking file: /etc/samba/smb.conf
> 
> # Global parameters
> [global]
> 	dns forwarder = 8.8.8.8
> 	netbios name = GAIA
> 	realm = ROMPEN.LOCAL
> 	server role = active directory domain controller
> 	workgroup = ROMPEN
> 	idmap_ldb:use rfc2307 = yes
>     wins support = yes
> 
> [netlogon]
> 	path = /var/lib/samba/sysvol/rompen.local/scripts
> 	read only = No
> 
> [sysvol]
> 	path = /var/lib/samba/sysvol
> 	read only = No
> 
> -----------
> 
> BIND_DLZ not detected in smb.conf
> 
> -----------
> 
In addition to below packages, 

apt install acl
Reported that enough, dont ask why debian isnt adding it to the Recommended
packages.
Since its obligated for the AD-DC's .
> Installed packages:
> ii  attr                           1:2.4.48-4                 
>          armhf        utilities for manipulating filesystem 
> extended attributes
> ii  krb5-config                    2.6                        
>          all          Configuration files for Kerberos Version 5
> ii  krb5-locales                   1.17-3                     
>          all          internationalization support for MIT Kerberos
> ii  krb5-user                      1.17-3                     
>          armhf        basic programs to authenticate using 
> MIT Kerberos
> ii  libacl1:armhf                  2.2.53-4                   
>          armhf        access control list - shared library
> ii  libattr1:armhf                 1:2.4.48-4                 
>          armhf        extended attribute handling - shared library
> ii  libgssapi-krb5-2:armhf         1.17-3                     
>          armhf        MIT Kerberos runtime libraries - krb5 
> GSS-API Mechanism
> ii  libkrb5-3:armhf                1.17-3                     
>          armhf        MIT Kerberos runtime libraries
> ii  libkrb5support0:armhf          1.17-3                     
>          armhf        MIT Kerberos runtime libraries - Support library
> ii  libnss-winbind:armhf           
> 2:4.9.5+dfsg-5+deb10u1+rpi1         armhf        Samba 
> nameservice integration plugins
> ii  libpam-winbind:armhf           
> 2:4.9.5+dfsg-5+deb10u1+rpi1         armhf        Windows 
> domain authentication integration plugin
> ii  libsmbclient:armhf             
> 2:4.9.5+dfsg-5+deb10u1+rpi1         armhf        shared 
> library for communication with SMB/CIFS servers
> ii  libwbclient0:armhf             
> 2:4.9.5+dfsg-5+deb10u1+rpi1         armhf        Samba 
> winbind client library
> ii  python-samba                   
> 2:4.9.5+dfsg-5+deb10u1+rpi1         armhf        Python 
> bindings for Samba
> ii  samba                          
> 2:4.9.5+dfsg-5+deb10u1+rpi1         armhf        SMB/CIFS 
> file, print, and login server for Unix
> ii  samba-common                   
> 2:4.9.5+dfsg-5+deb10u1+rpi1         all          common files 
> used by both the Samba server and client
> ii  samba-common-bin               
> 2:4.9.5+dfsg-5+deb10u1+rpi1         armhf        Samba common 
> files used by both the server and the client
> ii  samba-dsdb-modules:armhf       
> 2:4.9.5+dfsg-5+deb10u1+rpi1         armhf        Samba 
> Directory Services Database
> ii  samba-libs:armhf               
> 2:4.9.5+dfsg-5+deb10u1+rpi1         armhf        Samba core libraries
> ii  samba-testsuite                
> 2:4.9.5+dfsg-5+deb10u1+rpi1         armhf        test suite from Samba
> ii  samba-vfs-modules:armhf        
> 2:4.9.5+dfsg-5+deb10u1+rpi1         armhf        Samba 
> Virtual FileSystem plugins
> ii  smbclient                      
> 2:4.9.5+dfsg-5+deb10u1+rpi1         armhf        command-line 
> SMB/CIFS clients for Unix
> ii  winbind                        
> 2:4.9.5+dfsg-5+deb10u1+rpi1         armhf        service to 
> resolve user and group information from Windows NT servers
> 
> -----------
> 
> 
> DNA:
> 
> .font-unix/
> .ICE-unix/
> samba-debug-info.txt
> systemd-private-4feeaecc8e5e4411bb61b94f53b7484a-systemd-times
yncd.service-VWNVpy/> .Test-unix/
> .X11-unix/
> .XIM-unix/
> root at dna:~/tmp# cat /tmp/samba-debug-info.txt 
> Collected config  --- 2020-09-04-17:58 -----------
> 
> Hostname: dna
> DNS Domain: rompen.local
> FQDN: dna.rompen.local
> ipaddress: 192.168.88.3 
> 
> -----------
> 
> Kerberos SRV _kerberos._tcp.rompen.local record verified ok, 
> sample output: 
> Server:		192.168.88.2
> Address:	192.168.88.2#53
> 
> _kerberos._tcp.rompen.local	service = 0 100 88 gaia.rompen.local.
> Samba is running as a Unix domain member
> 
> -----------
>        Checking file: /etc/os-release
> 
> PRETTY_NAME="Raspbian GNU/Linux 10 (buster)"
> NAME="Raspbian GNU/Linux"
> VERSION_ID="10"
> VERSION="10 (buster)"
> VERSION_CODENAME=buster
> ID=raspbian
> ID_LIKE=debian
> HOME_URL="http://www.raspbian.org/"
> SUPPORT_URL="http://www.raspbian.org/RaspbianForums"
> BUG_REPORT_URL="http://www.raspbian.org/RaspbianBugs"
> 
> -----------
> 
> 
> This computer is running Debian 10.4 armv7l
> 
> -----------
> running command : ip a
> 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state 
> UNKNOWN group default qlen 1000
>     link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
>     inet 127.0.0.1/8 scope host lo
>     inet6 ::1/128 scope host 
> 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc 
> pfifo_fast state UP group default qlen 1000
>     link/ether b8:27:eb:97:db:d8 brd ff:ff:ff:ff:ff:ff
>     inet 192.168.88.3/24 brd 192.168.88.255 scope global 
> dynamic noprefixroute eth0
>        valid_lft 472sec preferred_lft 397sec
>     inet6 fe80::e85c:b84c:8f64:eb20/64 scope link 
> 3: wlan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state 
> DOWN group default qlen 1000
>     link/ether b8:27:eb:c2:8e:8d brd ff:ff:ff:ff:ff:ff
> 
> -----------
>        Checking file: /etc/hosts
> 
> 192.168.88.3	dna.rompen.local	dna
> 127.0.0.1	localhost
> ::1		localhost ip6-localhost ip6-loopback
> ff02::1		ip6-allnodes
> ff02::2		ip6-allrouters
> 
> -----------
> 
>        Checking file: /etc/resolv.conf
> 
> # Generated by resolvconf
> search rompen.local
> nameserver 192.168.88.2
> 
> -----------
> 
>        Checking file: /etc/krb5.conf
> 
> [libdefaults]
> 	default_realm = ROMPEN.LOCAL
> 	dns_lookup_realm = false
> 	dns_lookup_kdc = true
> 
> -----------
> 
>        Checking file: /etc/nsswitch.conf
> 
> # /etc/nsswitch.conf
> #
> # Example configuration of GNU Name Service Switch functionality.
> # If you have the `glibc-doc-reference' and `info' packages 
> installed, try:
> # `info libc "Name Service Switch"' for information about
this file.
> 
> passwd:         files winbind
> group:          files winbind
> shadow:         files
> gshadow:        files
> 
> hosts:          files mdns4_minimal [NOTFOUND=return] dns		## SAME HERE
move dns move mdns4_..
> networks:       files
> 
> protocols:      db files
> services:       db files
> ethers:         db files
> rpc:            db files
> 
> netgroup:       nis
> 
> -----------
> 
>        Checking file: /etc/samba/smb.conf
> 
> [global]
>   netbios name = DNA
>   workgroup = ROMPEN
>   security = ADS
>   realm = ROMPEN.LOCAL
>   encrypt passwords = yes
>   
>   acl allow execute always = yes
> 
>   idmap config *:backend = tdb
>   idmap config *:range = 70001-80000
>   idmap config <win domain>:backend = ad
>   idmap config <win domain>:schema_mode = rfc2307
>   idmap config <win domain>:range = 3000000-4000000
> 
>   winbind refresh tickets = Yes
>   vfs objects = acl_xattr
>   map acl inherit = Yes
>   store dos attributes = Yes
> 
>   dedicated keytab file = /etc/krb5.keytab
>   kerberos method = secrets and keytab
> 
>   winbind use default domain = yes
> 
>   winbind enum users = yes		<< change to No
>   winbind enum groups = yes		<< change to No. 
> 
>   username map = /etc/samba/user.map
>   dedicated keytab file = /etc/krb5.keytab
>   kerberos method = secrets and keytab
> 
>   vfs objects = acl_xattr
>   map acl inherit = Yes
>   store dos attributes = Yes 
> 
>   username map = /etc/samba/user.map
> 
> [share]
>    path = /nas
>    read only = no
>    inherit acls = yes
> 
>  [users]
>          path = /usr/home
>          read only = no
>          force create mode = 0600
>          force directory mode = 0700
> 
> -----------
> 
> Running as Unix domain member and no user.map detected.
> This is possible with an auth-only setup, checking also for NFS parts
> -----------
>        Checking file: /etc/idmapd.conf
> 
> [General]
> 
> Verbosity = 0
> Pipefs-Directory = /run/rpc_pipefs
> # set your own domain here, if it differs from FQDN minus hostname
> # Domain = localdomain
> 
> [Mapping]
> 
> Nobody-User = nobody
> Nobody-Group = nogroup
> 
> -----------
> 
> 
> Installed packages:
> ii  acl                            2.2.53-4                   
>          armhf        access control list - utilities
> ii  attr                           1:2.4.48-4                 
>          armhf        utilities for manipulating filesystem 
> extended attributes
> ii  krb5-config                    2.6                        
>          all          Configuration files for Kerberos Version 5
> ii  krb5-user                      1.17-3                     
>          armhf        basic programs to authenticate using 
> MIT Kerberos
> ii  libacl1:armhf                  2.2.53-4                   
>          armhf        access control list - shared library
> ii  libattr1:armhf                 1:2.4.48-4                 
>          armhf        extended attribute handling - shared library
> ii  libgssapi-krb5-2:armhf         1.17-3                     
>          armhf        MIT Kerberos runtime libraries - krb5 
> GSS-API Mechanism
> ii  libkrb5-3:armhf                1.17-3                     
>          armhf        MIT Kerberos runtime libraries
> ii  libkrb5support0:armhf          1.17-3                     
>          armhf        MIT Kerberos runtime libraries - Support library
> ii  libnfsidmap2:armhf             0.25-5.1                   
>          armhf        NFS idmapping library
> ii  libnss-winbind:armhf           
> 2:4.9.5+dfsg-5+deb10u1+rpi1         armhf        Samba 
> nameservice integration plugins
> ii  libpam-winbind:armhf           
> 2:4.9.5+dfsg-5+deb10u1+rpi1         armhf        Windows 
> domain authentication integration plugin
> ii  libwbclient0:armhf             
> 2:4.9.5+dfsg-5+deb10u1+rpi1         armhf        Samba 
> winbind client library
> ii  nfs-common                     1:1.3.4-2.5+deb10u1        
>          armhf        NFS support files common to client and server
> ii  python-samba                   
> 2:4.9.5+dfsg-5+deb10u1+rpi1         armhf        Python 
> bindings for Samba
> ii  samba                          
> 2:4.9.5+dfsg-5+deb10u1+rpi1         armhf        SMB/CIFS 
> file, print, and login server for Unix
> ii  samba-common                   
> 2:4.9.5+dfsg-5+deb10u1+rpi1         all          common files 
> used by both the Samba server and client
> ii  samba-common-bin               
> 2:4.9.5+dfsg-5+deb10u1+rpi1         armhf        Samba common 
> files used by both the server and the client
> ii  samba-dsdb-modules:armhf       
> 2:4.9.5+dfsg-5+deb10u1+rpi1         armhf        Samba 
> Directory Services Database
> ii  samba-libs:armhf               
> 2:4.9.5+dfsg-5+deb10u1+rpi1         armhf        Samba core libraries
> ii  samba-vfs-modules:armhf        
> 2:4.9.5+dfsg-5+deb10u1+rpi1         armhf        Samba 
> Virtual FileSystem plugins
> ii  winbind                        
> 2:4.9.5+dfsg-5+deb10u1+rpi1         armhf        service to 
> resolve user and group information from Windows NT servers
> 
> -----------
> root at dna:~/tmp# 
> 
> 
> Philip
> 
> > On 31 Aug 2020, at 20:09, Rowland penny via samba 
> <samba at lists.samba.org> wrote:
> > 
> > On 31/08/2020 18:27, mail at philipoffermans.nl wrote:
> >> I got it. Thanks. The share is working. Only problem, I 
> need some files to be only readable for the end user 
> (templates) the problem is windows doesn't for some reason 
> allow me to change the rights. I am using dutch windows so 
> the error is dutch but translated it say. Can't connect/find 
> active directory to verify or open claimtypes.
> >> 
> > That is not a problem, post the error message in Dutch and 
> I feel Louis (who is from Rotterdam) will understand it, but 
> in the mean time, can you download this file:
> > 
> > 
> https://github.com/thctlo/samba4/blob/master/samba-collect-deb
ug-info.sh> > 
> > Run it on your Samba machines and post it into a post to 
> this list, do not attach it, this list removes attachments.
> > 
> > Rowland
> > 
> > 
> > 
> > -- 
> > To unsubscribe from this list go to the following URL and read the
> > instructions:  https://lists.samba.org/mailman/options/samba
> 
> -- 
> To unsubscribe from this list go to the following URL and read the
> instructions:  https://lists.samba.org/mailman/options/samba
> 
>

Rowland penny

2020-Sep-07 08:00 UTC

head link

[Samba] No DNS domain configured

On 07/09/2020 08:02, L.P.H. van Belle via samba wrote:> See below, basicly what now happend is.
> This one line :
>
>> 127.0.1.1	gaia.rompen.local	gaia   	<<<< CHANGE THIS
> Is what is your problem.
>probably isn't, if netplan is being used :-)

It could be what I just found, check /etc/netplan/00-installer-config.yaml

Does it show the information you expect ?

It didn't on one DC in a two DC domain I created, it only showed google 
as the nameserver.

 From my (limited) understanding, you are supposed to edit 
/etc/systemd/resolved.conf , add the required data and then run 
'systemctl restart systemd-resolved.service' and everything is supposed 
to get updated, only it didn't on one DC.

It was such a lot easier when you just edited /etc/network/interfaces 
and /etc/resolv.conf and then rebooted :-\

Rowland

L.P.H. van Belle

2020-Sep-07 08:54 UTC

head link

[Samba] No DNS domain configured

Hai, well,   Close..  

I see multiple errors which makes that DNS setup isnt working. 
We have multiple ways to setup networking these days, which also makes things
more confusing..
- old style. /etc/network/interfaces 
- netplan    /etc/netplan/00-installer-config.yaml 
- systemd    /etc/systemd/network/lan-devX.network

> >
> probably isn't, if netplan is being used :-)
> 
> It could be what I just found, check 
> /etc/netplan/00-installer-config.yaml
> 
> Does it show the information you expect ?
Yes, it is most probley missing the DNS entries.. 
 nameserver:
	 addresses: [8.8.8.8, 1.1.1.1, 8.8.4.4 ]

netplan try
And if ok,  netplan apply

But, samba needed here. 
 nameserver:
	 addresses: [ip_DC1, IP_DC2, IP_DC3 ]
> 
> It didn't on one DC in a two DC domain I created, it only 
> showed google as the nameserver.Its a known bug with netplan. 
> 
>  From my (limited) understanding, you are supposed to edit 
> /etc/systemd/resolved.conf , add the required data and then run 
> 'systemctl restart systemd-resolved.service' and everything 
> is supposed  to get updated, only it didn't on one DC.
Systemd is not netplan but you can combine these..
Only i would not recommend it, works fine, but i preffer to pick one type of
setup.
> 
> It was such a lot easier when you just edited /etc/network/interfaces 
> and /etc/resolv.conf and then rebooted :-\ All /etc/network/interfaces needs is : dns-addresses ip_dns1,ip_dns2 
And a restart of networking

Or use only systemd its networking setup, then it was only 1 file you need to
edit.

#/etc/systemd/network/lan-member-dev-ethx.network
# This setup is for a Domain MEMBER server.
# IPV4 only.
[Match]
Name=eth0
#Name=eno1
#Name=e*

[Network]
DHCP=no
DNSSEC=allow-downgrade
DNSSECNegativeTrustAnchors=lan
IPv6PrivacyExtensions=no
IPv6AcceptRouterAdvertisements=no
LinkLocalAddressing=no
LLMNR=no

# make use of systemd-resolved and its setup, setup the 'search
dnsdomain.tld.'
Domains=internal.dom.tld.

# lets make use of systemd-timedate and timesyncd for the member servers.
# we assume the DNS are also the NTP servers. (just point to the AD-DC's.) 
NTP=ip_DC1 IP_DC2
# For AD-DC, disable NTP here and install ntp daemon, obligated.

# DNS resolvers (its safe to mix IPv4 and IPv6)
# Max 3 DNS entries. ::1 or 127.0.0.1 if you use a cacheing dns.
# If you use systemd-resolved stub (caching) dns, use 127.0.0.53 (only)
# Defaults to the AD-DC servers found in the dns.
DNS=ip_DC1 IP_DC2
# For AD-DC, set IP of the AD-DC itself.

# IPv4 gateway and primary IP address.
Gateway=192.168.0.1
Address=192.168.0.224/24

All you need and always correct for IPv6. 

So to me, this thread cant proceed untill dns resolving is fixed. 
> It was such a lot easier when you just edited /etc/network/interfaces 
> and /etc/resolv.conf and then rebooted :-\And yes, this is way easiers, only if you use this, other parts then are more
difficult to setup.
And thats based on my experience.

So far, 

Greetz, 

Louis

Marco Gaiarin

2020-Sep-08 12:41 UTC

head link

[Samba] No DNS domain configured

Mandi! L.P.H. van Belle via samba
  In chel di` si favelave...
> We have multiple ways to setup networking these days, which also makes
things more confusing..
> - old style. /etc/network/interfaces 
> - netplan    /etc/netplan/00-installer-config.yaml 
> - systemd    /etc/systemd/network/lan-devX.network
But...what is the preferred method for interface configuration, now, in
debian buster?!

Looking at:
	https://www.debian.org/releases/buster/amd64/release-notes/index.html

or in debina wiki i've not found anything about netplan or
systemd-networkd...


Sorry, thanks.

-- 
dott. Marco Gaiarin				        GNUPG Key ID: 240A3D66
  Associazione ``La Nostra Famiglia''         
http://www.lanostrafamiglia.it/
  Polo FVG   -   Via della Bont?, 7 - 33078   -   San Vito al Tagliamento (PN)
  marco.gaiarin(at)lanostrafamiglia.it   t +39-0434-842711   f +39-0434-842797

		Dona il 5 PER MILLE a LA NOSTRA FAMIGLIA!
      http://www.lanostrafamiglia.it/index.php/it/sostienici/5x1000
	(cf 00307430132, categoria ONLUS oppure RICERCA SANITARIA)

L.P.H. van Belle

2020-Sep-08 13:46 UTC

head link

[Samba] No DNS domain configured

Hai marco, 

Well, "My" preffered for now is systemd-networkd.

Current debian still used /etc/network/ but next will be systemd as default. 
Ubuntu uses : /etc/netplan/

Howto configure it. 

wget
https://raw.githubusercontent.com/thctlo/debian-scripts/master/setup-systemd-networkd.sh
bash setup-systemd-networkd.sh member

Nothing will be changed on the system but you end up with a configured file,
offcourse review it.
And run the commands you run. 

I just used it myself again ;-) 

Only configure the LAN interface for Domains DNS NTP
(you can do both but that might give a wrong order in resolv.conf) 

When thats done, you wanted NFS or CIFS mounts (automounts) 
Search "Re: [Samba] samba4 kerberized nfs4 with sssd ad client" in the
list

Shows that part also. 

back to my work, i have a crashed server, disks dyed. 

Greetz, 

Louis




> -----Oorspronkelijk bericht-----
> Van: samba [mailto:samba-bounces at lists.samba.org] Namens 
> Marco Gaiarin via samba
> Verzonden: dinsdag 8 september 2020 14:42
> Aan: samba at lists.samba.org
> Onderwerp: Re: [Samba] No DNS domain configured
> 
> Mandi! L.P.H. van Belle via samba
>   In chel di` si favelave...
> 
> > We have multiple ways to setup networking these days, which 
> also makes things more confusing..
> > - old style. /etc/network/interfaces 
> > - netplan    /etc/netplan/00-installer-config.yaml 
> > - systemd    /etc/systemd/network/lan-devX.network
> 
> But...what is the preferred method for interface 
> configuration, now, in
> debian buster?!
> 
> Looking at:
> 	
> https://www.debian.org/releases/buster/amd64/release-notes/index.html
> 
> or in debina wiki i've not found anything about netplan or
> systemd-networkd...
> 
> 
> Sorry, thanks.
> 
> -- 
> dott. Marco Gaiarin				        GNUPG 
> Key ID: 240A3D66
>   Associazione ``La Nostra Famiglia''          
> http://www.lanostrafamiglia.it/
>   Polo FVG   -   Via della Bont?, 7 - 33078   -   San Vito al 
> Tagliamento (PN)
>   marco.gaiarin(at)lanostrafamiglia.it   t +39-0434-842711   
> f +39-0434-842797
> 
> 		Dona il 5 PER MILLE a LA NOSTRA FAMIGLIA!
>       http://www.lanostrafamiglia.it/index.php/it/sostienici/5x1000
> 	(cf 00307430132, categoria ONLUS oppure RICERCA SANITARIA)
> 
> -- 
> To unsubscribe from this list go to the following URL and read the
> instructions:  https://lists.samba.org/mailman/options/samba
> 
>

Maybe Matching Threads

Search for more reasonably related threads

samba - Sep 2020 - No DNS domain configured

[Samba] No DNS domain configured

[Samba] No DNS domain configured

[Samba] No DNS domain configured

[Samba] No DNS domain configured

[Samba] No DNS domain configured

Maybe Matching Threads