Hai Barry, We know about exchange might be a problem, the others i dont know.. Check the windows schema levels. https://wiki.samba.org/index.php/AD_Schema_Version_Support You could try a clean setup as shown by my howto. Before you install setup ip and hostname in the windows DNS for the linux server. Make sure you use a name thats never used before, just to be sure of no side effects. Then follow this to the letter. ( so use bind9_dlz ) https://github.com/thctlo/samba4/blob/master/full-howto-Ubuntu18.04-samba-AD_DC.txt Line 31, use the windows DC's ip's Line 47, use the same time server as the windows DC's. Until line 259, the provisioning line, change that to join. And proceed with the steps.> -----Oorspronkelijk bericht----- > Onderwerp: [Samba] Setup a Samba AD DC as an additional DC > > > 2008 Member - MS Exchange 2010 > > >BOING!!! ^^^^^^^^^^^ > > >From my knowledge, you cannot use exchange with a Samba DC. > > My original plan was a stepped approach. Recall I created a > Samba Member Server. Created a Share, entered GID, UID for > all users and groups, but we could not get the member server > to ever see those users/groups.Thats a mis-config in you setup.> > I can connect to that share from windows clients, but I have > to connect as the administrator (who is mapped to root). I > set ACLs with Windows Tools, and Windows still looks at them > as there, but they do not function because we never could. > > The Thread is: > getenv does not return any AD DOMAIN users or groups - > ?nsswitch is not setup for Samba? > > I am going to migrate away from Exchange. In fact MailEnable > has completed implementation of mail delivery to public > folders so I can go ahead and do that. Louis however > recommended Kopano. I had considered and dismissed it as too > expensive. I was trying to see if it was available as Open > Source or if there was a subscription that would Not be expensive.Kopano community version is free, so cant be cheaper. https://kopano.io/ Downloads : https://download.kopano.io/community/ Debian buster wil get kopano. ( at least lets hope so ) https://packages.debian.org/search?keywords=kopano-core> > For the moment if we could go back to the Member Server and get it working I had started > that to create a Replicated Storage Volume as we are having trouble with Microsoft DFS Replicated folders.A linux member of windows member ? If i think i can make some extra time tomorrow and i'll make a member howto also for Ubuntu and i'll update the current stretch version to 4.8/4.9 So far, Greetz, Louis
No, there is a simple problem and solution to get id.s https://wiki.samba.org/index.php/Setting_up_Samba_as_a_Domain_Member#Configuring_the_Name_Service_Switch For the member, apt-get install libnss-winbind libpam-winbind change /etc/nsswitch.conf passwd: compat systemd winbind group: compat systemd winbind Run pam-auth-update And for testing set these to yes in smb.conf winbind enum users = no winbind enum groups = no And here you go all you users ;-) Set it back to no and then use getent passwd username. ;-) Greetz, Louis> -----Oorspronkelijk bericht----- > Van: Barry D. Adkins [mailto:Barry at daram.com] > Verzonden: donderdag 29 november 2018 16:09 > Aan: L.P.H. van Belle > Onderwerp: RE: [Samba] Setup a Samba AD DC as an additional DC > > I will follow your instructions. > > As for this: > > >> For the moment if we could go back to the Member Server > and get it working I had started > >> that to create a Replicated Storage Volume as we are > having trouble with Microsoft DFS Replicated folders. > >A linux member of windows member ? > >If i think i can make some extra time tomorrow and i'll make > a member howto also for Ubuntu and i'll update the current > stretch version to 4.8/4.9 > > I joined a Samba Member Server to the Windows AD Domain. We > had problems with user/group retrieval/connection. > > That was this thread: > " getenv does not return any AD DOMAIN users or groups - > ?nsswitch is not setup for Samba?" > > It was suggested to overcome that problem to create a Samba > DC. That’s why we are doing that. Eventually, I hope to > have no Microsoft servers. eMail maybe just the Windows OS > depending on if I can get a Linux Mail server with the > functionality we need. > > -Barry Adkins >
On Thu, 29 Nov 2018 16:15:24 +0100 "L.P.H. van Belle via samba" <samba at lists.samba.org> wrote:> No, there is a simple problem and solution to get id.s > > https://wiki.samba.org/index.php/Setting_up_Samba_as_a_Domain_Member#Configuring_the_Name_Service_Switch > > For the member, > apt-get install libnss-winbind libpam-winbind > > change /etc/nsswitch.conf > passwd: compat systemd winbind > group: compat systemd winbind > > Run pam-auth-update > And for testing set these to yes in smb.conf > winbind enum users = no > winbind enum groups = noER, why would you add default settings that do nothing ? Changing 'no' to 'yes' would make sense ;-) Rowland
Yes, Your totaly correct, but readability get higer prio for me then not showing defaults im my setup. Just bit easier to read and it does not harm. This is also why my configs have the lines like this : # Keep no in production, set yes when debugging, this slows down your samba. Readability is also a big thing, and often forgoten/misplaced. Greetz, Lousi> -----Oorspronkelijk bericht----- > Van: samba [mailto:samba-bounces at lists.samba.org] Namens > Rowland Penny via samba > Verzonden: donderdag 29 november 2018 16:25 > Aan: samba at lists.samba.org > Onderwerp: Re: [Samba] Setup a Samba AD DC as an additional DC > > On Thu, 29 Nov 2018 16:15:24 +0100 > "L.P.H. van Belle via samba" <samba at lists.samba.org> wrote: > > > No, there is a simple problem and solution to get id.s > > > > > https://wiki.samba.org/index.php/Setting_up_Samba_as_a_Domain_ > Member#Configuring_the_Name_Service_Switch > > > > For the member, > > apt-get install libnss-winbind libpam-winbind > > > > change /etc/nsswitch.conf > > passwd: compat systemd winbind > > group: compat systemd winbind > > > > Run pam-auth-update > > And for testing set these to yes in smb.conf > > winbind enum users = no > > winbind enum groups = no > > ER, why would you add default settings that do nothing ? > Changing 'no' to 'yes' would make sense ;-) > > Rowland > > > -- > To unsubscribe from this list go to the following URL and read the > instructions: https://lists.samba.org/mailman/options/samba >
>We know about exchange might be a problem, the others i dont know.. >Check the windows schema levels. >https://wiki.samba.org/index.php/AD_Schema_Version_Support56 = Windows Server 2012 What the heck... I'm getting better at it... I'll start over again and follow your how to. -Barry
I have not proceeded past loading your files as it is complaining about Clearsigned file invalid, etc...: :~$ sudo wget -O - http://apt.van-belle.nl/louis-van-belle.gpg-key.asc | sudo apt-key add - --2018-11-30 00:03:40-- http://apt.van-belle.nl/louis-van-belle.gpg-key.asc Resolving apt.van-belle.nl (apt.van-belle.nl)... 149.210.206.148, 2a01:7c8:aab6:5ab:5054:ff:feff:ae66 Connecting to apt.van-belle.nl (apt.van-belle.nl)|149.210.206.148|:80... connected. HTTP request sent, awaiting response... 200 OK Length: 8684 (8.5K) [text/plain] Saving to: ‘STDOUT’ - 100%[===================>] 8.48K --.-KB/s in 0s 2018-11-30 00:03:40 (179 MB/s) - written to stdout [8684/8684] OK :~$ sudo apt-get update Hit:1 http://ubuntu.mirrors.tds.net/ubuntu bionic InRelease Hit:2 http://archive.ubuntu.com/ubuntu bionic InRelease Get:4 http://archive.ubuntu.com/ubuntu bionic-security InRelease [83.2 kB] Get:3 http://apt.van-belle.nl/debian?bionic-samba49 main InRelease [1,242 B] Err:3 http://apt.van-belle.nl/debian?bionic-samba49 main InRelease Clearsigned file isn't valid, got 'NOSPLIT' (does the network require authentication?) Get:5 http://archive.ubuntu.com/ubuntu bionic-updates InRelease [88.7 kB] Reading package lists... Done E: Failed to fetch http://apt.van-belle.nl/debian?bionic-samba49/dists/main/InRelease Clearsigned file isn't valid, got 'NOSPLIT' (does the network require authentication?) E: The repository 'http://apt.van-belle.nl/debian?bionic-samba49 main InRelease' is not signed. N: Updating from such a repository can't be done securely, and is therefore disabled by default. N: See apt-secure(8) manpage for repository creation and user configuration details. ************ Also, since I'm stopped for now... you had me create a resolv.conf file here: /etc/systemd/resolv.conf Yet Ubuntu has it here: /etc/resolv.conf AND.... that is a "read only" file as it is dynamically updated as Ubuntu uses Netplan... I have not uninstalled resolvd as I did before under other guidance. I created the file you directed in the How-to, but I don't think it is doing anything. Never the less the is NO problem resolving to whatever valid DNS name used in nslookup. I did not want to proceed until you let me know if there is something wrong with how I am retrieving your packages. -Barry Adkins
Aah... You copied the instruction from the list mail and one where out of the blue "??" are in.. http://apt.van-belle.nl/debian?bionic-samba49 main InRelease Should be http://apt.van-belle.nl/debian/bionic-samba49 main InRelease So change the ? To / in the aptfile ;-) and procede.. Greetz, Louis> -----Oorspronkelijk bericht----- > Van: samba [mailto:samba-bounces at lists.samba.org] Namens > Barry D. Adkins via samba > Verzonden: vrijdag 30 november 2018 7:11 > Aan: samba at lists.samba.org > Onderwerp: [Samba] Setup a Samba AD DC as an additional DC > > I have not proceeded past loading your files as it is > complaining about Clearsigned file invalid, etc...: > :~$ sudo wget -O - > http://apt.van-belle.nl/louis-van-belle.gpg-key.asc | sudo > apt-key add - > --2018-11-30 00:03:40-- > http://apt.van-belle.nl/louis-van-belle.gpg-key.asc > Resolving apt.van-belle.nl (apt.van-belle.nl)... > 149.210.206.148, 2a01:7c8:aab6:5ab:5054:ff:feff:ae66 > Connecting to apt.van-belle.nl > (apt.van-belle.nl)|149.210.206.148|:80... connected. > HTTP request sent, awaiting response... 200 OK > Length: 8684 (8.5K) [text/plain] > Saving to: ‘STDOUT’ > > - 100%[===================>] 8.48K > --.-KB/s in 0s > > 2018-11-30 00:03:40 (179 MB/s) - written to stdout [8684/8684] > > OK > :~$ sudo apt-get update > Hit:1 http://ubuntu.mirrors.tds.net/ubuntu bionic InRelease > Hit:2 http://archive.ubuntu.com/ubuntu bionic InRelease > Get:4 http://archive.ubuntu.com/ubuntu bionic-security > InRelease [83.2 kB] > Get:3 http://apt.van-belle.nl/debian?bionic-samba49 main > InRelease [1,242 B] > Err:3 http://apt.van-belle.nl/debian?bionic-samba49 main InRelease > Clearsigned file isn't valid, got 'NOSPLIT' (does the > network require authentication?) > Get:5 http://archive.ubuntu.com/ubuntu bionic-updates > InRelease [88.7 kB] > Reading package lists... Done > E: Failed to fetch > http://apt.van-belle.nl/debian?bionic-samba49/dists/main/InRelease Clearsigned file isn't valid, got 'NOSPLIT' (does the > network require authentication?)> E: The repository > 'http://apt.van-belle.nl/debian?bionic-samba49 main > InRelease' is not signed. > N: Updating from such a repository can't be done securely, > and is therefore disabled by default. > N: See apt-secure(8) manpage for repository creation and user > configuration details. > > ************ > Also, since I'm stopped for now... you had me create a > resolv.conf file here: /etc/systemd/resolv.conf > Yet Ubuntu has it here: /etc/resolv.conf AND.... that is a > "read only" file as it is dynamically updated as Ubuntu uses > Netplan... I have not uninstalled resolvd as I did before > under other guidance. > > I created the file you directed in the How-to, but I don't > think it is doing anything. Never the less the is NO problem > resolving to whatever valid DNS name used in nslookup. > > I did not want to proceed until you let me know if there is > something wrong with how I am retrieving your packages. > > -Barry Adkins > -- > To unsubscribe from this list go to the following URL and read the > instructions: https://lists.samba.org/mailman/options/samba >
On Fri, 30 Nov 2018 06:11:18 +0000 "Barry D. Adkins via samba" <samba at lists.samba.org> wrote:> Also, since I'm stopped for now... you had me create a resolv.conf > file here: /etc/systemd/resolv.conf Yet Ubuntu has it > here: /etc/resolv.conf AND.... that is a "read only" file as it is > dynamically updated as Ubuntu uses Netplan... I have not uninstalled > resolvd as I did before under other guidance.It is a link to another file and there is an easy fix: sudo apt install ifupdown sudo remove nplan Configure /etc/network/interfaces sudo rm -f /etc/resolv.conf sudo nano /etc/resolv.conf But this is all in my Ubuntu install instructions that I sent you ;-) Rowland
Same problem. Can't join as AD DC. Secrets file missing the Machine
Secret:
If the problem is MS Exchange, then I'll have to hold off until I can dump
Exchange and get Kopano or something else.
Still getting this:
ldb_wrap open of secrets.ldb
Could not find machine account in secrets database: Failed to fetch machine
account
password for DARAM from both secrets.ldb (Could not find entry to match
filter: '(&(flatname=DARAM)(objectclass=primaryDomain))' base:
'cn=Primary Domains':
No such object: dsdb_search at ../source4/dsdb/common/util.c:4705) and from
/var/lib/samba/private/secrets.tdb: NT_STATUS_CANT_ACCESS_DOMAIN_INFO
Replicating DC=ForestDnsZones,DC=daram,DC=com
Partition[DC=ForestDnsZones,DC=daram,DC=com] objects[211/211] linked_values[0/0]
Exop on[CN=RID Manager$,CN=System,DC=daram,DC=com] objects[3] linked_values[0]
Committing SAM database
Adding 1 remote DNS records for HOUDCU01.daram.com
Adding DNS A record HOUDCU01.daram.com for IPv4 IP: 131.192.176.40
Adding DNS CNAME record 96198a82-8847-4a60-ae00-bfbbb0e78bd4._msdcs.daram.com
for HOUDCU01.daram.com
Join failed - cleaning up
Deleted CN=RID Set,CN=HOUDCU01,OU=Domain Controllers,DC=daram,DC=com
Deleted CN=HOUDCU01,OU=Domain Controllers,DC=daram,DC=com
Deleted CN=NTDS
Settings,CN=HOUDCU01,CN=Servers,CN=Houston,CN=Sites,CN=Configuration,DC=daram,DC=com
Deleted
CN=HOUDCU01,CN=Servers,CN=Houston,CN=Sites,CN=Configuration,DC=daram,DC=com
Deleted
DC=HOUDCU01,DC=daram.com,CN=MicrosoftDNS,DC=DomainDnsZones,DC=daram,DC=com
ERROR(runtime): uncaught exception - (9601,
'WERR_DNS_ERROR_ZONE_DOES_NOT_EXIST')
File "/usr/lib/python2.7/dist-packages/samba/netcmd/__init__.py",
line 177, in _run
return self.run(*args, **kwargs)
File "/usr/lib/python2.7/dist-packages/samba/netcmd/domain.py", line
716, in run
backend_store=backend_store)
File "/usr/lib/python2.7/dist-packages/samba/join.py", line 1500, in
join_DC
ctx.do_join()
File "/usr/lib/python2.7/dist-packages/samba/join.py", line 1405, in
do_join
ctx.join_add_dns_records()
File "/usr/lib/python2.7/dist-packages/samba/join.py", line 1164, in
join_add_dns_records
None)
>We know about exchange might be a problem, the others i dont know..
>Check the windows schema levels.
>https://wiki.samba.org/index.php/AD_Schema_Version_Support
>You could try a clean setup as shown by my howto.
>Before you install setup ip and hostname in the windows DNS for the linux
server.
>Make sure you use a name thats never used before, just to be sure of no side
effects.
>Then follow this to the letter. ( so use bind9_dlz )
>https://github.com/thctlo/samba4/blob/master/full-howto-Ubuntu18.04-samba-AD_DC.txt
>Line 31, use the windows DC's ip's
>Line 47, use the same time server as the windows DC's.
>Until line 259, the provisioning line, change that to join.
>And proceed with the steps.
> -----Oorspronkelijk bericht-----
> Onderwerp: [Samba] Setup a Samba AD DC as an additional DC
>
> > 2008 Member - MS Exchange 2010
>
> >BOING!!! ^^^^^^^^^^^
>
> >From my knowledge, you cannot use exchange with a Samba DC.
>
-Barry Adkins
Possibly Parallel Threads
- Ubuntu bionic 18.04 compatible samba 4.9.2 packages amd64 only now available.
- Van Belle Samba Repo
- Setup a Samba AD DC as an additional DC
- Ubuntu bionic 18.04 compatible samba 4.9.2 packages amd64 only now available.
- Debian Stretch - apt-get update - Van Belle repository not found