Hi all,
i get struck with nearly the same problem as here :
https://lists.samba.org/archive/samba/2016-December/205088.html
excepted the NT_ error.
And the thread ends suddenly without solution. And i tested all that
Louis and Rowland proposed.
Printer server as domain member but here with rid backend.
Debian stretch : samba 4.5.12 (debian package), also tested with 4.6.7
and 4.6.8 (Louis package)
Windows 10 64 bits
Posix acl
SePrivileges ok.
And i also tested on my AD DC with Windows ACL, same error. But i want
the print server on a domain member.
i followed all the wiki pages about setup a print server.
My printer is a Toshiba e-studio 4555CSE and i downloaded the driver
from the official web site (type 3),and i tested with others printers
randomly chosen on the net (epson, brother,...)
In printmanagement.msc i can add the server, and i can see the printer
configured in cups.
On windows side, upload seems to go fine but 2 seconds after the end of
the progress bar, I've got the message : "Impossible to install xxxx
driver, access denied"
And on print server in syslog :
Nov 1 18:57:22 winix-test smbd[362]: [2017/11/01 18:57:22.357896, 0]
../source3/rpc_server/spoolss/srv_spoolss_nt.c:8476(_spoolss_AddPrinterDriverEx)
Nov 1 18:57:22 winix-test smbd[362]: _spoolss_AddPrinterDriverEx:
level 8 not yet implemented
Nov 1 18:57:22 winix-test smbd[362]: [2017/11/01 18:57:22.458270, 0]
../source3/printing/nt_printing.c:1097(move_driver_file_to_download_area)
Nov 1 18:57:22 winix-test smbd[362]:
move_driver_file_to_download_area: Unable to rename
[x64/eSf6psf_builtin.dll] to [x64/3/eSf6psf_builtin.dll]:
NT_STATUS_SHARING_VIOLATION
My smb.conf :
[global]
security = ADS
workgroup = TEST
realm = TEST.EUS
log file = /var/log/samba/%m.log
log level = 10
idmap config * : backend = tdb
idmap config * : range = 3000-7999
idmap config TEST : backend = rid
idmap config TEST : range = 10000-999999
username map = /var/lib/samba/etc/user.map
rpc_server:spoolss = external
rpc_daemon:spoolssd = fork
spoolss: architecture = Windows x64
printing = CUPS
load printers = no
[printers]
path = /var/spool/samba/
printable = yes
[print$]
path = /srv/samba/printers
read only = no
What i missed or stupid thing did ?
Thanks !
Regards,
--
Manu
Hi list, Problem solved with an account of Domain Admins group. I was thinking it was possible with the Administrator account with SePrintOperatorPrivilege right and with "username map" in smb.conf. Sorry for the noise. Regards, -- Manu
Hai, Sorry for the slow reaction here. I was few days out of the office. But can you try the universal 2 driver. That one works fine for me. And if you send me the exact driver your trying to me, i'll test that one in my setup. Greetz, Louis> -----Oorspronkelijk bericht----- > Van: samba [mailto:samba-bounces at lists.samba.org] Namens Manu > Baylac via samba > Verzonden: woensdag 1 november 2017 19:58 > Aan: samba at lists.samba.org > Onderwerp: [Samba] Unable to upload printer drivers > > Hi all, > > > i get struck with nearly the same problem as here : > https://lists.samba.org/archive/samba/2016-December/205088.html > excepted the NT_ error. > > And the thread ends suddenly without solution. And i tested all that > Louis and Rowland proposed. > > Printer server as domain member but here with rid backend. > Debian stretch : samba 4.5.12 (debian package), also tested > with 4.6.7 > and 4.6.8 (Louis package) > Windows 10 64 bits > Posix acl > SePrivileges ok. > > And i also tested on my AD DC with Windows ACL, same error. > But i want > the print server on a domain member. > > i followed all the wiki pages about setup a print server. > > My printer is a Toshiba e-studio 4555CSE and i downloaded the driver > from the official web site (type 3),and i tested with others printers > randomly chosen on the net (epson, brother,...) > > In printmanagement.msc i can add the server, and i can see > the printer > configured in cups. > > On windows side, upload seems to go fine but 2 seconds after > the end of > the progress bar, I've got the message : "Impossible to install xxxx > driver, access denied" > > And on print server in syslog : > > Nov 1 18:57:22 winix-test smbd[362]: [2017/11/01 > 18:57:22.357896, 0] > ../source3/rpc_server/spoolss/srv_spoolss_nt.c:8476(_spoolss_A > ddPrinterDriverEx) > Nov 1 18:57:22 winix-test smbd[362]: _spoolss_AddPrinterDriverEx: > level 8 not yet implemented > Nov 1 18:57:22 winix-test smbd[362]: [2017/11/01 > 18:57:22.458270, 0] > ../source3/printing/nt_printing.c:1097(move_driver_file_to_dow > nload_area) > Nov 1 18:57:22 winix-test smbd[362]: > move_driver_file_to_download_area: Unable to rename > [x64/eSf6psf_builtin.dll] to [x64/3/eSf6psf_builtin.dll]: > NT_STATUS_SHARING_VIOLATION > > > My smb.conf : > > [global] > > security = ADS > workgroup = TEST > realm = TEST.EUS > > log file = /var/log/samba/%m.log > log level = 10 > > idmap config * : backend = tdb > idmap config * : range = 3000-7999 > > idmap config TEST : backend = rid > idmap config TEST : range = 10000-999999 > > username map = /var/lib/samba/etc/user.map > > rpc_server:spoolss = external > rpc_daemon:spoolssd = fork > > spoolss: architecture = Windows x64 > > printing = CUPS > load printers = no > > [printers] > path = /var/spool/samba/ > printable = yes > > [print$] > path = /srv/samba/printers > read only = no > > > What i missed or stupid thing did ? > > Thanks ! > > Regards, > > -- > Manu > > > > > > > > > > -- > To unsubscribe from this list go to the following URL and read the > instructions: https://lists.samba.org/mailman/options/samba >
Hello Louis and list, Le 03/11/2017 à 10:25, L.P.H. van Belle via samba a écrit :> Sorry for the slow reaction here. I was few days out of the office.No problem, thanks for your quick answer.> But can you try the universal 2 driver. That one works fine for me. > And if you send me the exact driver your trying to me, i'll test that one in my setup.In my second mail, i said that finally i successfully installed the driver... but only once... i deleted the driver, reinstalled and... same error. After hours and near becoming crazy (because it is a very basic setup), trying to reproduce the problem before responding, i finally installed a win7 and...booo...no problem, works fine with all drivers... I'm not a windows user, so i downloaded win10 from microsoft website for my platform test since now it's possible. And in the school where i get the exactly same error, they have official windows10 with purchased licenses. So a friend gave me an official iso of W7 to test in the same context on my platform and it works like a charm, i didn't change anything in my configuration. The driver i used is the one you mentioned (i wrote type 3 because on the wiki page the term is used and the full error on windows side is : impossible to install Toshiba Universal Printer2, type3 - user mode, x64 access denied). The only available driver on toshiba official site is W2012/8.1/8, but i think it is compatible with w10 since this printer is still proposed by suppliers. So, Louis, do you tested under windows10 ??? The problem is that in the school they use windows10 so i must find the solution. And what does mean NT_STATUS_SHARING_VIOLATION error ? Ah, and when i try to upload under w10 the 32 bits driver, same error on windows but the NT_ error doesn't appear in syslog. Here is what can i say...with my poor english, sorry. Any suggestion ? Thanks ! Regards, -- Manu
Hai Manu,> -----Oorspronkelijk bericht----- > Van: samba [mailto:samba-bounces at lists.samba.org] Namens Manu > Baylac via samba > Verzonden: vrijdag 3 november 2017 20:21 > Aan: samba at lists.samba.org > Onderwerp: Re: [Samba] Unable to upload printer drivers > > Hello Louis and list, > > > Le 03/11/2017 à 10:25, L.P.H. van Belle via samba a écrit : > > > Sorry for the slow reaction here. I was few days out of the office. > > No problem, thanks for your quick answer. > > > But can you try the universal 2 driver. That one works fine for me. > > And if you send me the exact driver your trying to me, i'll > test that one in my setup. > > In my second mail, i said that finally i successfully installed the > driver... but only once... > i deleted the driver, reinstalled and... same error.You might have hit a bug here.> > After hours and near becoming crazy (because it is a very > basic setup), > trying to reproduce the problem before responding, i finally > installed a > win7 and...booo...no problem, works fine with all drivers... > > I'm not a windows user, so i downloaded win10 from microsoft website > for my platform test since now it's possible. And in the > school where i get the exactly same error, they have official windows10 with > purchased licenses. > So a friend gave me an official iso of W7 to test in the same > context on > my platform and it works like a charm, i didn't change anything in my > configuration. > > The driver i used is the one you mentioned (i wrote type 3 because on > the wiki page the term is used and the full error on windows > side is : > impossible to install Toshiba Universal Printer2, type3 - > user mode, x64 > access denied). The only available driver on toshiba official site is > W2012/8.1/8, but i think it is compatible with w10 since this > printer is > still proposed by suppliers. > > So, Louis, do you tested under windows10 ??? The problem is > that in the > school they use windows10 so i must find the solution.I normaly onlu use windows 7, since that works fine for me, but i'll setup a win10 and give it a try. My cups server publishes x64 by default and you need a win32 and a win64 pc to upload both drivers. Atm i only do 64bit drivers since i dont have any 32bit os running anymore.> > And what does mean NT_STATUS_SHARING_VIOLATION error ?I this this is related to : access denied Now, this is something you can try and i'll explain what is difference in my setup. Most users dont use spoolss and dont use the architecture setttings. rpc_server:spoolss = external rpc_daemon:spoolssd = fork spoolss:architecture = Windows x64 Now, since you number ... Somany who says its not working and here it is, ive done a good checka again in my setup. ( the install if from 2015, as of samba 4.2 ) There as a "historyical" bug, about lower and uppercased characters in (Debian) /var/lib/samba/printers/ The good layout, untouched as of 2016. root at rtd-print1:~# ls -al /var/lib/samba/printers/ drwxr-xr-x 2 root root 4096 Mar 11 2016 COLOR drwxr-xr-x 2 root root 4096 Mar 11 2016 IA64 drwxr-xr-x 2 root root 4096 Mar 11 2016 W32ALPHA drwxr-xr-x 2 root root 4096 Mar 11 2016 W32MIPS drwxr-xr-x 2 root root 4096 Mar 11 2016 W32PPC drwxr-xr-x 2 root root 4096 Mar 11 2016 W32X86 drwxr-xr-x 2 root root 4096 Mar 11 2016 WIN40 drwxr-xr-x 2 root root 4096 Mar 11 2016 x64 But this is what im using ( since aug 2015 ) I symlinked very folder lower to uppercase, now this bug was i believe on the X64/x64, but i did them all. root at rtd-print1:~# ls -al /home/samba/printers/ drwxr-xr-x 4 root root 4096 Aug 7 10:35 .. lrwxrwxrwx 1 root root 5 Aug 2 2016 color -> COLOR drwxrwx---+ 2 root root 4096 Aug 6 2015 COLOR lrwxrwxrwx 1 root root 4 Aug 2 2016 ia64 -> IA64 drwxrwx---+ 2 root root 4096 Aug 6 2015 IA64 drwxrwx---+ 2 root root 4096 Aug 6 2015 W32ALPHA lrwxrwxrwx 1 root root 7 Aug 2 2016 w32mips -> W32MIPS drwxrwx---+ 2 root root 4096 Aug 6 2015 W32MIPS lrwxrwxrwx 1 root root 6 Aug 2 2016 w32ppc -> W32PPC drwxrwx---+ 2 root root 4096 Aug 6 2015 W32PPC lrwxrwxrwx 1 root root 6 Aug 2 2016 w32x86 -> W32X86 drwxrwx---+ 4 root root 4096 Oct 24 2016 W32X86 lrwxrwxrwx 1 root root 5 Aug 2 2016 win40 -> WIN40 drwxrwx---+ 2 root root 4096 Aug 6 2015 WIN40 drwxrwx---+ 3 root root 4096 Oct 10 09:59 x64 lrwxrwxrwx 1 root root 3 Aug 18 2016 X64 -> x64 At least a thing you can try.> > Ah, and when i try to upload under w10 the 32 bits driver, > same error on > windows but the NT_ error doesn't appear in syslog. > > Here is what can i say...with my poor english, sorry.Ah, well its as good as mine ;-)> > Any suggestion ? > > Thanks ! > > Regards, > > -- > ManuGreetz, Louis