Yes, it did install a bunch of packages from the sernet site. So far all the tests are failing. Seems that Sernet put samba under slightly different directories so I am struggling with testing. I was hoping there was some documentation on sernet site that I was having trouble finding, obviously not. Give me some time. It is just different again (from CentOS howto I had used in the past.) I do love a challenge! --- ------------------------- Bob Wooden of Donelson Trophy 615.885.2846 (main) www.donelsontrophy.com [1] "Everyone deserves an award!!" On 2014-12-06 13:10, Rowland Penny wrote:> On 06/12/14 19:00, Donelson Trophy wrote: > > Did, as su "apt-get install sernet-samba-ad" (after adding source to repositories.) > > (Have a test setup on CentOS 6.6 running but it is Samba 4.3.0 ** from git. Would prefer Samba version not so new as 4.3.0 so, want to change to Ubuntu.) > --- > > ------------------------- > > Bob Wooden of Donelson Trophy > > 615.885.2846 (main) > www.donelsontrophy.com [1] > > "Everyone deserves an award!!" > > On 2014-12-06 12:49, Rowland Penny wrote: > > On 06/12/14 18:21, Donelson Trophy wrote: > I am attempting to install EnterpriseSamba (Sernet) on a Ubuntu 14.04.1LTS server. I finding it a challenge to determine the proper installation and configuration procedures with sernet-samba. There are no (at least I cannot find them) how-to's or instructions or readme on the sernet download website. Any ideas where to find such or guidance? (I post this here because I seem to remember someone suggesting (to one of my previous posts) that I should try sernet on pick my OS.) > > How do you want to set it up ? AD DC or as a 'classic' server ? > > RowlandThis should also have installed a raft of packages, mostly starting with sernet- . You should be able to set Sernet-samba up just as if it was the samba that comes with Ubuntu 14.04. Any problems, see the samba wiki: https://wiki.samba.org/index.php/Samba_AD_DC_HOWTO [2] Rowland Links: ------ [1] http://www.donelsontrophy.com [2] https://wiki.samba.org/index.php/Samba_AD_DC_HOWTO
On 06/12/14 19:18, Donelson Trophy wrote:> > Yes, it did install a bunch of packages from the sernet site. > > So far all the tests are failing. Seems that Sernet put samba under > slightly different directories so I am struggling with testing. > > I was hoping there was some documentation on sernet site that I was > having trouble finding, obviously not. > > Give me some time. It is just different again (from CentOS howto I had > used in the past.) > > I do love a challenge! > > --- > > ------------------------------------------------------------------------ > Bob Wooden of Donelson Trophy > > 615.885.2846 (main) > www.donelsontrophy.com <http://www.donelsontrophy.com> > > "Everyone deserves an award!!" > > On 2014-12-06 13:10, Rowland Penny wrote: > >> On 06/12/14 19:00, Donelson Trophy wrote: >>> >>> Did, as su "apt-get install sernet-samba-ad" (after adding source to >>> repositories.) >>> >>> (Have a test setup on CentOS 6.6 running but it is Samba 4.3.0 ** >>> from git. Would prefer Samba version not so new as 4.3.0 so, want to >>> change to Ubuntu.) >>> >>> --- >>> >>> ------------------------------------------------------------------------ >>> Bob Wooden of Donelson Trophy >>> >>> 615.885.2846 (main) >>> www.donelsontrophy.com <http://www.donelsontrophy.com> >>> >>> "Everyone deserves an award!!" >>> >>> On 2014-12-06 12:49, Rowland Penny wrote: >>> >>> On 06/12/14 18:21, Donelson Trophy wrote: >>> >>> I am attempting to install EnterpriseSamba (Sernet) on a >>> Ubuntu 14.04.1LTS server. I finding it a challenge to >>> determine the proper installation and configuration >>> procedures with sernet-samba. There are no (at least I >>> cannot find them) how-to's or instructions or readme on the >>> sernet download website. Any ideas where to find such or >>> guidance? (I post this here because I seem to remember >>> someone suggesting (to one of my previous posts) that I >>> should try sernet on pick my OS.) >>> >>> How do you want to set it up ? AD DC or as a 'classic' server ? >>> >>> Rowland >>> >> >> This should also have installed a raft of packages, mostly starting >> with sernet- . You should be able to set Sernet-samba up just as if >> it was the samba that comes with Ubuntu 14.04. >> >> Any problems, see the samba wiki: >> https://wiki.samba.org/index.php/Samba_AD_DC_HOWTO >> >> Rowland >>If you are going to provision as an AD DC, then you need samba-tool, 'which samba-tool' will tell you where it is. You can use something similar to find the samba daemon 'which samba', once you have found this, '/path/to/samba -b' will tell you where everything else is, but I thought that the sernet packages installed like the ubuntu packages. Rowland
I am going to stop wasting our time today. I am not at a machine that I can access the box via ssh and attach image of screens, etc. to ask precise questions. Let me get to a better place and time to forum more efficiently. More soon. --- ------------------------- Bob Wooden of Donelson Trophy 615.885.2846 (main) www.donelsontrophy.com [1] "Everyone deserves an award!!" On 2014-12-06 13:25, Rowland Penny wrote:> On 06/12/14 19:18, Donelson Trophy wrote: > Yes, it did install a bunch of packages from the sernet site. So far all the tests are failing. Seems that Sernet put samba under slightly different directories so I am struggling with testing. I was hoping there was some documentation on sernet site that I was having trouble finding, obviously not. Give me some time. It is just different again (from CentOS howto I had used in the past.) I do love a challenge! --- ------------------------------------------------------------------------ Bob Wooden of Donelson Trophy 615.885.2846 (main) www.donelsontrophy.com [1] <http://www.donelsontrophy.com [1]> "Everyone deserves an award!!" On 2014-12-06 13:10, Rowland Penny wrote: On 06/12/14 19:00, Donelson Trophy wrote: Did, as su "apt-get install sernet-samba-ad" (after adding source to repositories.) (Have a test setup on CentOS 6.6 running but it is Samba 4.3.0 ** from git. Would prefer Samba version not so new as 4.3.0 so, want to change to Ubuntu.) --------------------------------------------------------------------------- Bob Wooden of Donelson Trophy 615.885.2846 (main) www.donelsontrophy.com [1] <http://www.donelsontrophy.com [1]> "Everyone deserves an award!!" On 2014-12-06 12:49, Rowland Penny wrote: On 06/12/14 18:21, Donelson Trophy wrote: I am attempting to install EnterpriseSamba (Sernet) on a Ubuntu 14.04.1LTS server. I finding it a challenge to determine the proper installation and configuration procedures with sernet-samba. There are no (at least I cannot find them) how-to's or instructions or readme on the sernet download website. Any ideas where to find such or guidance? (I post this here because I seem to remember someone suggesting (to one of my previous posts) that I should try sernet on pick my OS.) How do you want to set it up ? AD DC or as a 'classic' server ? Rowland This should also have installed a raft of packages, mostly starting with sernet- . You should be able to set Sernet-samba up just as if i t was the samba that comes with Ubuntu 14.04. Any problems, see the samba wiki: https://wiki.samba.org/index.php/Samba_AD_DC_HOWTO [2] Rowland If you are going to provision as an AD DC, then you need samba-tool, 'which samba-tool' will tell you where it is. You can use something similar to find the samba daemon 'which samba', once you have found this, '/path/to/samba -b' will tell you where everything else is, but I thought that the sernet packages installed like the ubuntu packages. Rowland Links: ------ [1] http://www.donelsontrophy.com [2] https://wiki.samba.org/index.php/Samba_AD_DC_HOWTO
Thank you Hector. Despite my poor spanish, I can see that I need to check what dependencies are loading with Sernet-samba. More tomorrow when I am at a better machine to communicate with the forum on. Thanks. --- ------------------------- Bob Wooden of Donelson Trophy 615.885.2846 (main) www.donelsontrophy.com [3] "Everyone deserves an award!!" On 2014-12-06 14:23, Hector Suarez Planas wrote:> Hi, Donelson. > >> I am going to stop wasting our time today. I am not at a machine that I >> can access the box via ssh and attach image of screens, etc. to ask >> precise questions. Let me get to a better place and time to forum more >> efficiently. >> >> More soon. > > I successfully install Sernet Samba 4 en Debian Wheezy. In Ubuntu must be the same procedure, I think, I'm not test it yet. > > I have two PDCs on differents subnets and it woks very well until now. > > I made a litle manual, but in Spanish version. It is based on Samba Wiki with some changes made by my self. > > I made a local repo of Sernet Samba 4 packages by apt-cache (debmirror not work), and I instal from this local repo: > > This is the part: > > 4.- A?adir el repo local de Sernet-Samba4 al APT. > > Contenido del archivo /etc/apt/sources.list.d/sernet-samba4.list: > > deb file:///media/flash/sernet-samba4-repo/4.1/debian [1] wheezy main > > 5.- Modificar el comportamiento del APT con respecto a los repos a?adidos: > > Contenido del archivo /etc/apt/preferences.d/sernet-samba4.pref: > > Package: * > Pin: origin "sernet-samba4" > Pin-Priority: 991 > > NOTA: Esto no s? si funciona, dado que el origen de la paqueter?a es el mismo. > > 6.- Instalaci?n de paquetes necesarios para el Samba4: > > # apt-get install build-essential libacl1-dev libattr1-dev libblkid-dev libgnutls-dev libreadline-dev > python-dev python-dnspython gdb pkg-config libpopt-dev libldap2-dev dnsutils libbsd-dev > attr krb5-user docbook-xsl libcups2-dev acl quota fam libnet-ldap-perl bind9 dnsutils > > NOTA 1: Aqu? durante la configuraci?n del paquete cliente de Kerberos se solicitar?n datos. Yo puse los > que cre? correctos. De todas formas, creo que se puede configurar a posteriori. > > NOTA 2: Es fundamental DESHABILITAR EL ARRANQUE del servicio bind9 si se va a utilizar el DNS interno de > Samba4, dado que no permitir? cargar todos los servicios necesarios que se utilizan para el buen > funcionamiento del Controlador de Dominio (DNS, RPC, Kerberos, SMB-CIFS, etc.): > > # (Comando para quitar del arranque el servicio en todos los niveles de ejecuci?n) > # service bind9 stop > > 7.- Instalaci?n del Samba 4 de Sernet: > > Antes d refrescar la lista de paquetes se debe a?adir la llave GPG del repositorio de Samba 4 de Sernet. > Esto se hace de la siguiente manera: > > # cat /media/flash/sernet-samba4-repo/sernet-build-key.gpg | apt-key add - > # apt-get update > > Completados estos pasos, ya se puede proceder a instalar los paquetes de Samba 4 de Sernet: > > # apt-get install sernet-samba-ad libwbclient0 sernet-samba-client sernet-samba-winbind sernet-samba > sernet-samba-libs sernet-samba-libsmbclient0 > > Sorry for send it in Spanish. > > In your case, the URL on Sernet FTP must be this: > > (Registration is required to acces) > > https://<username>:<password>@download.sernet.de/packages/samba/4.1/ubuntu [2] > > (For lucid, precise and trusty) > > See ya. > > :)Links: ------ [1] file:///media/flash/sernet-samba4-repo/4.1/debian [2] https://<username>:<password>@download.sernet.de/packages/samba/4.1/ubuntu [3] http://www.donelsontrophy.com
On 06/12/14 20:34, Donelson Trophy wrote:> > > Thank you Hector. Despite my poor spanish, I can see that I need to > check what dependencies are loading with Sernet-samba. > > More tomorrow when I am at a better machine to communicate with the > forum on. > > Thanks. > > --- > > ------------------------- > > Bob Wooden of Donelson Trophy > > 615.885.2846 (main) > www.donelsontrophy.com [3] > > "Everyone deserves an award!!" > > On 2014-12-06 14:23, Hector Suarez Planas wrote: > >> Hi, Donelson. >> >>> I am going to stop wasting our time today. I am not at a machine that I >>> can access the box via ssh and attach image of screens, etc. to ask >>> precise questions. Let me get to a better place and time to forum more >>> efficiently. >>> >>> More soon. >> I successfully install Sernet Samba 4 en Debian Wheezy. In Ubuntu must be the same procedure, I think, I'm not test it yet. >> >> I have two PDCs on differents subnets and it woks very well until now. >> >> I made a litle manual, but in Spanish version. It is based on Samba Wiki with some changes made by my self. >> >> I made a local repo of Sernet Samba 4 packages by apt-cache (debmirror not work), and I instal from this local repo: >> >> This is the part: >> >> 4.- A?adir el repo local de Sernet-Samba4 al APT. >> >> Contenido del archivo /etc/apt/sources.list.d/sernet-samba4.list: >> >> deb file:///media/flash/sernet-samba4-repo/4.1/debian [1] wheezy main >> >> 5.- Modificar el comportamiento del APT con respecto a los repos a?adidos: >> >> Contenido del archivo /etc/apt/preferences.d/sernet-samba4.pref: >> >> Package: * >> Pin: origin "sernet-samba4" >> Pin-Priority: 991 >> >> NOTA: Esto no s? si funciona, dado que el origen de la paqueter?a es el mismo. >> >> 6.- Instalaci?n de paquetes necesarios para el Samba4: >> >> # apt-get install build-essential libacl1-dev libattr1-dev libblkid-dev libgnutls-dev libreadline-dev >> python-dev python-dnspython gdb pkg-config libpopt-dev libldap2-dev dnsutils libbsd-dev >> attr krb5-user docbook-xsl libcups2-dev acl quota fam libnet-ldap-perl bind9 dnsutils >> >> NOTA 1: Aqu? durante la configuraci?n del paquete cliente de Kerberos se solicitar?n datos. Yo puse los >> que cre? correctos. De todas formas, creo que se puede configurar a posteriori. >> >> NOTA 2: Es fundamental DESHABILITAR EL ARRANQUE del servicio bind9 si se va a utilizar el DNS interno de >> Samba4, dado que no permitir? cargar todos los servicios necesarios que se utilizan para el buen >> funcionamiento del Controlador de Dominio (DNS, RPC, Kerberos, SMB-CIFS, etc.): >> >> # (Comando para quitar del arranque el servicio en todos los niveles de ejecuci?n) >> # service bind9 stop >> >> 7.- Instalaci?n del Samba 4 de Sernet: >> >> Antes d refrescar la lista de paquetes se debe a?adir la llave GPG del repositorio de Samba 4 de Sernet. >> Esto se hace de la siguiente manera: >> >> # cat /media/flash/sernet-samba4-repo/sernet-build-key.gpg | apt-key add - >> # apt-get update >> >> Completados estos pasos, ya se puede proceder a instalar los paquetes de Samba 4 de Sernet: >> >> # apt-get install sernet-samba-ad libwbclient0 sernet-samba-client sernet-samba-winbind sernet-samba >> sernet-samba-libs sernet-samba-libsmbclient0 >> >> Sorry for send it in Spanish. >> >> In your case, the URL on Sernet FTP must be this: >> >> (Registration is required to acces) >> >> https://<username>:<password>@download.sernet.de/packages/samba/4.1/ubuntu [2] >> >> (For lucid, precise and trusty) >> >> See ya. >> >> :) > > > Links: > ------ > [1] file:///media/flash/sernet-samba4-repo/4.1/debian > [2] > https://<username>:<password>@download.sernet.de/packages/samba/4.1/ubuntu > [3] http://www.donelsontrophy.comHi, I just had a thought, Louis has a webpage with scripts to install sernet-samba : https://secure.bazuin.nl/scripts/ These might help you. Rowland