thr3ads.net - samba - [Samba] rpcclient error [Feb 2002]

If this information is useful, please help other people find it:
Share via:

Nick Pietraniec

2002-Feb-15 12:31 UTC

[Samba] rpcclient error

Hello all, I'm trying to use CUPSADDSMB to add some printer shares. 
Using the verbose output, everything looks good except the following
line.

session setup ok
Domain=[WHEELZ] OS=[Unix] Server=[Samba 2.2.3a]
cmd = addprinter kubrick_linux kubrick_linux "kubrick_linux"
""
addprinter kubrick_linux kubrick_linux "kubrick_linux" ""
result was NT code 0xc000070a


Am I correct in assuming that it is erroring?  What is NT code
0xc000070a?  I've done some searches and even looked through the samba
code, but didn't find anything.  any ideas?

-Nick

Nick Pietraniec

2002-Feb-15 13:36 UTC

head link

[Samba] rpcclient error

still getting the same error without the underscore

Domain=[WHEELZ] OS=[Unix] Server=[Samba 2.2.3a]
cmd = addprinter kubricklinux kubricklinux "kubricklinux" ""
addprinter kubricklinux kubricklinux "kubricklinux" ""
result was NT code 0xc000070a

I'm also now noticing in smb.conf...

[2002/02/15 16:09:28, 0] printing/print_cups.c:cups_printer_fn(109)
  Unable to connect to CUPS server localhost - Connection refused
[2002/02/15 16:10:46, 0] printing/print_cups.c:cups_printername_ok(290)
  Unable to get printer status for
::{2227a280-3aea-1069-a2de-08002b30309d} - client-error-not-found




On Fri, 2002-02-15 at 15:50, ___cliff rayman___ wrote:> i am not at all an expert on this, but
> IIRC, putting underscores in printer
> names messes NT up.  change the
> name to kubrickLinux and everything
> should work ok.
> 
> 
> --
> ___cliff rayman___cliff@genwax.com___http://www.genwax.com/
> 
> Nick Pietraniec wrote:
> 
> > Hello all, I'm trying to use CUPSADDSMB to add some printer
shares.
> > Using the verbose output, everything looks good except the following
> > line.
> >
> > session setup ok
> > Domain=[WHEELZ] OS=[Unix] Server=[Samba 2.2.3a]
> > cmd = addprinter kubrick_linux kubrick_linux "kubrick_linux"
""
> > addprinter kubrick_linux kubrick_linux "kubrick_linux"
""
> > result was NT code 0xc000070a
> >
> > Am I correct in assuming that it is erroring?  What is NT code
> > 0xc000070a?  I've done some searches and even looked through the
samba
> > code, but didn't find anything.  any ideas?
> >
> 
>

Gerald Carter

2002-Feb-16 06:04 UTC

head link

[Samba] rpcclient error

On 15 Feb 2002, Nick Pietraniec wrote:
> Hello all, I'm trying to use CUPSADDSMB to add some printer shares. 
> Using the verbose output, everything looks good except the following
> line.
> 
> session setup ok
> Domain=[WHEELZ] OS=[Unix] Server=[Samba 2.2.3a]
> cmd = addprinter kubrick_linux kubrick_linux "kubrick_linux"
""
> addprinter kubrick_linux kubrick_linux "kubrick_linux"
""
> result was NT code 0xc000070a
> 
> 
> Am I correct in assuming that it is erroring?  What is NT code
> 0xc000070a?  I've done some searches and even looked through the samba
> code, but didn't find anything.  any ideas?
It's not 0xc000070a.  rpcclient is misprinting the error
0x070a (1804).  And from include/doserr.h

	#define ERRprinteralreadyexists 1802





cheers, jerry
 ---------------------------------------------------------------------
 Hewlett-Packard                                     http://www.hp.com
 SAMBA Team                                       http://www.samba.org
 --                                            http://www.plainjoe.org
 "Sam's Teach Yourself Samba in 24 Hours" 2ed.      ISBN
0-672-32269-2
 --"I never saved anything for the swim back." Ethan Hawk in Gattaca--

Robert M Shepard

2002-Oct-12 17:15 UTC

head link

[Samba] rpcclient error

I am setting up a linux box (redhat 7.3) to server as a printer server on 
a windows NT network.  This is the second server I have set up.  The first 
server is working correctly with no problems.


I am using cups.  ON the first server, I can add cups printers to samba 
just fine.  I can upload and download drivers without any problems.

On the second server I keep getting an error on cupsaddsmb.  I upgraded to 
2.2.6rc2 and get the same error.

this is the output from cupsaddsmb.  at the end, I ran the rpcclient 
command manually with -d3 error log.  Note that this isn't an 
authentication problem, because the upload of the drivers with smbclient
succeeds.

also, this is using cups 1.1.16 which corrected the erroneous rpcclient 
command in earlier versions.

thanks, any help would be appreciated.
bob shepard


dded interface ip=172.25.0.19 bcast=172.25.255.255 nmask=255.255.0.0
Domain=[SPH_DOMAIN] OS=[Unix] Server=[Samba 2.2.6rc2]
NT_STATUS_OBJECT_NAME_COLLISION making remote directory \W32X86
putting file /var/spool/cups/tmp/3da6de0706fa3 as \W32X86/hislsr1.PPD (7181.1
kb/s) (average 7181.3 kb/s)
putting file /usr/share/cups/drivers/ADOBEPS5.DLL as \W32X86/ADOBEPS5.DLL
(10639.9 kb/s) (average 10409.3 kb/s)
putting file /usr/share/cups/drivers/ADOBEPSU.DLL as \W32X86/ADOBEPSU.DLL
(11041.6 kb/s) (average 10542.4 kb/s)
putting file /usr/share/cups/drivers/ADOBEPSU.HLP as \W32X86/ADOBEPSU.HLP
(9008.8 kb/s) (average 10490.5 kb/s)
cmd = adddriver "Windows NT x86"
"hislsr1:ADOBEPS5.DLL:hislsr1.PPD:ADOBEPSU.DLL:ADOBEPSU.HLP:NULL:RAW:NULL"
result was NT_STATUS_UNSUCCESSFUL
added interface ip=172.25.0.19 bcast=172.25.255.255 nmask=255.255.0.0
Domain=[SPH_DOMAIN] OS=[Unix] Server=[Samba 2.2.6rc2]
NT_STATUS_OBJECT_NAME_COLLISION making remote directory \WIN40
putting file /var/spool/cups/tmp/3da6de0706fa3 as \WIN40/hislsr1.PPD (4308.7
kb/s) (average 4308.8 kb/s)
putting file /usr/share/cups/drivers/ADFONTS.MFM as \WIN40/ADFONTS.MFM (13786.7
kb/s) (average 12709.7 kb/s)
putting file /usr/share/cups/drivers/ADOBEPS4.DRV as \WIN40/ADOBEPS4.DRV (3711.8
kb/s) (average 5246.3 kb/s)
putting file /usr/share/cups/drivers/ADOBEPS4.HLP as \WIN40/ADOBEPS4.HLP (1033.7
kb/s) (average 3561.3 kb/s)
putting file /usr/share/cups/drivers/DEFPRTR2.PPD as \WIN40/DEFPRTR2.PPD (6588.1
kb/s) (average 3575.3 kb/s)
putting file /usr/share/cups/drivers/ICONLIB.DLL as \WIN40/ICONLIB.DLL (14419.7
kb/s) (average 3772.5 kb/s)
putting file /usr/share/cups/drivers/PSMON.DLL as \WIN40/PSMON.DLL (11199.8
kb/s) (average 3855.9 kb/s)
cmd = adddriver "Windows 4.0"
"hislsr1:ADOBEPS4.DRV:hislsr1.PPD:NULL:ADOBEPS4.HLP:PSMON.DLL:RAW:ADOBEPS4.DRV:hislsr1.PPD,ADOBEPS4.HLP,PSMON.DLL,ADFONTS.MFM,DEFPRTR2.PPD,ICONLIB.DLL"
result was NT_STATUS_UNSUCCESSFUL
cmd = setdriver hislsr1 hislsr1
result was NT_STATUS_UNSUCCESSFUL
Running command: smbclient //localhost/print\$ -N -U'xxxxxx%xxxxxx' -c
'mkdir W32X86;put /var/spool/cups/tmp/3da6de0706fa3 W32X86/hislsr1.PPD;put
/usr/share/cups/drivers/ADOBEPS5.DLL W32X86/ADOBEPS5.DLL;put
/usr/share/cups/drivers/ADOBEPSU.DLL W32X86/ADOBEPSU.DLL;put
/usr/share/cups/drivers/ADOBEPSU.HLP W32X86/ADOBEPSU.HLP'

Running command: rpcclient localhost -N -U'xxxxxx%xxxxxx' -c
'adddriver "Windows NT x86"
"hislsr1:ADOBEPS5.DLL:hislsr1.PPD:ADOBEPSU.DLL:ADOBEPSU.HLP:NULL:RAW:NULL"'

Running command: smbclient //localhost/print\$ -N -U'xxxxxx%xxxxxx' -c
'mkdir WIN40;put /var/spool/cups/tmp/3da6de0706fa3 WIN40/hislsr1.PPD;put
/usr/share/cups/drivers/ADFONTS.MFM WIN40/ADFONTS.MFM;put
/usr/share/cups/drivers/ADOBEPS4.DRV WIN40/ADOBEPS4.DRV;put
/usr/share/cups/drivers/ADOBEPS4.HLP WIN40/ADOBEPS4.HLP;put
/usr/share/cups/drivers/DEFPRTR2.PPD WIN40/DEFPRTR2.PPD;put
/usr/share/cups/drivers/ICONLIB.DLL WIN40/ICONLIB.DLL;put
/usr/share/cups/drivers/PSMON.DLL WIN40/PSMON.DLL;'

Running command: rpcclient localhost -N -U'xxxxxx%xxxxxx' -c
'adddriver "Windows 4.0"
"hislsr1:ADOBEPS4.DRV:hislsr1.PPD:NULL:ADOBEPS4.HLP:PSMON.DLL:RAW:ADOBEPS4.DRV:hislsr1.PPD,ADOBEPS4.HLP,PSMON.DLL,ADFONTS.MFM,DEFPRTR2.PPD,ICONLIB.DLL"'

Running command: rpcclient localhost -N -U'xxxxxx%xxxxxx' -c
'setdriver hislsr1 hislsr1'

Initialising global parameters
params.c:pm_process() - Processing configuration file
"/etc/samba/smb.conf"
Processing section "[global]"
added interface ip=172.25.0.19 bcast=172.25.255.255 nmask=255.255.0.0
resolve_lmhosts: Attempting lmhosts lookup for name localhost<0x20>

Connecting to host=localhost share=IPC$
Connecting to 127.0.0.1 at port 445
error connecting to 127.0.0.1:445 (Connection refused)
Connecting to 127.0.0.1 at port 139
lsa_io_sec_qos: length c does not match size 8
cmd = adddriver "Windows NT x86"
"hislsr1:ADOBEPS5.DLL:hislsr1.PPD:ADOBEPSU.DLL:ADOBEPSU.HLP:NULL:RAW:NULL"
result was NT_STATUS_UNSUCCESSFUL

Robert M Shepard

2002-Nov-08 03:43 UTC

head link

[Samba] rpcclient error

I am running samba 2.2.6 on redhat 7.3.  This machine has joined the 
domain, and I can browse and access shares on this server.

I want this server to be a major printer server on a large network of some 
700 PC's.  I am trying to get windows driver download and upload working 
correctly.

everytime I run the command  rpcclient localhost -N -U'yyyyy%xxxx' -c 
'adddriver "Windows NT x86" 
"hislsr1:ADOBEPS5.DLL:hislsr1.PPD:ADOBEPSU.DLL:ADOBEPSU.HLP:NULL:RAW:NULL"'

I get the error:

cmd = adddriver "Windows NT x86" 
"hislsr1:ADOBEPS5.DLL:hislsr1.PPD:ADOBEPSU.DLL:ADOBEPSU.HLP:NULL:RAW:NULL"
result was NT_STATUS_UNSUCCESSFUL

running with -d3 gives

Connecting to 127.0.0.1 at port 139
lsa_io_sec_qos: length c does not match size 8

I have seen several references to this error on the list with various 
solutions.  I have tried all of them.

This is really the only impediment to making this work and eliminating all 
of the windows NT printer servers on our network.  Because of the size of 
the network, installing printer drivers locally is impractical.

Note, this isn't an authentication problem because I can run other rpc 
commands correctly and access shares correctly.

I have traced this error to the file:

"parse_lsa.c" line 179 of 2103 --8%-- col 1-8

but I haven't tried to figure out exactly what this is doing.

any help would be appreciated.

bob shepard

Maybe Matching Threads

Search for more seemingly similar threads

samba - Feb 2002 - rpcclient error

[Samba] rpcclient error

[Samba] rpcclient error

[Samba] rpcclient error

[Samba] rpcclient error

[Samba] rpcclient error

Maybe Matching Threads