Paf7172@aol.com
2002-Feb-11 06:37 UTC
[Samba] Access to Solaris 8 from NT with Samba - Access Denied.
I am new to Samba and I am having problems on setting up a simple share. I basically need a couple of Win2k workstation to access my Solaris 8 server and I am getting: System error 1240 has occurred. The account is not authorized to log in from this station. Below is my smb.conf file. If there is something I am missing or if someone has a simple version of this that I could modify for my env. it would be greatly appreciated. This is a temp requirement so I am trying not to spend much time on it. Thanks in advance, Paul # This is the main Samba configuration file. You should read the # smb.conf(5) manual page in order to understand the options listed # here. Samba has a huge number of configurable options (perhaps too # many!) most of which are not shown in this example # # Any line which starts with a ; (semi-colon) or a # (hash) # is a comment and is ignored. In this example we will use a # # for commentry and a ; for parts of the config file that you # may wish to enable # # NOTE: Whenever you modify this file you should run the command "testparm" # to check that you have not many any basic syntactic errors. # #======================= Global Settings ====================================[global] # workgroup = NT-Domain-Name or Workgroup-Name, eg: REDHAT4 workgroup = VALUEOPTIONS # server string is the equivalent of the NT Description field server string = Samba Server # This option is important for security. It allows you to restrict # connections to machines which are on your local network. The # following example restricts access to two C class networks and # the "loopback" interface. For more examples of the syntax see # the smb.conf man page hosts allow = xxx.xxx.xxx.xxx (host of Win2K ws) # If you want to automatically load your printer list rather # than setting them up individually then you'll need this load printers = yes # you may wish to override the location of the printcap file ; printcap name = /etc/printcap # on SystemV system setting printcap name to lpstat should allow # you to automatically obtain a printer list from the SystemV spool # system ; printcap name = lpstat # It should not be necessary to specify the print system type unless # it is non-standard. Currently supported print systems include: # bsd, sysv, plp, lprng, aix, hpux, qnx ; printing = bsd # Uncomment this if you want a guest account, you must add this to /etc/passwd # otherwise the user "nobody" is used guest account = sambates # this tells Samba to use a separate log file for each machine # that connects log file = /usr/local/samba/var/log.%m # Put a capping on the size of the log files (in Kb). max log size = 50 # Security mode. Most people will want user level security. See # security_level.txt for details. security = user # Use password server option only with security = server # The argument list may include: # password server = My_PDC_Name [My_BDC_Name] [My_Next_BDC_Name] # or to auto-locate the domain controller/s # password server = * ; password server = <NT-Server-Name> # Note: Do NOT use the now deprecated option of "domain controller" # This option is no longer implemented. # You may wish to use password encryption. Please read # ENCRYPTION.txt, Win95.txt and WinNT.txt in the Samba documentation. # Do not enable this option unless you have read those documents ; encrypt passwords = yes # Using the following line enables you to customise your configuration # on a per machine basis. The %m gets replaced with the netbios name # of the machine that is connecting ; include = /usr/local/samba/lib/smb.conf.%m # Most people will find that this option gives better performance. # See speed.txt and the manual pages for details # You may want to add the following on a Linux system: # SO_RCVBUF=8192 SO_SNDBUF=8192 socket options = TCP_NODELAY # Configure Samba to use multiple interfaces # If you have multiple network interfaces then you must list them # here. See the man page for details. ; interfaces = 192.168.12.2/24 192.168.13.2/24 # Browser Control Options: # set local master to no if you don't want Samba to become a master # browser on your network. Otherwise the normal election rules apply ; local master = no # OS Level determines the precedence of this server in master browser # elections. The default value should be reasonable ; os level = 33 # Domain Master specifies Samba to be the Domain Master Browser. This # allows Samba to collate browse lists between subnets. Don't use this # if you already have a Windows NT domain controller doing this job ; domain master = yes # Preferred Master causes Samba to force a local browser election on startup # and gives it a slightly higher chance of winning the election ; preferred master = yes # Enable this if you want Samba to be a domain logon server for # Windows95 workstations. ; domain logons = yes # if you enable domain logons then you may want a per-machine or # per user logon script # run a specific logon batch file per workstation (machine) ; logon script = %m.bat # run a specific logon batch file per username ; logon script = %U.bat # Where to store roving profiles (only for Win95 and WinNT) # %L substitutes for this servers netbios name, %U is username # You must uncomment the [Profiles] share below ; logon path = \\%L\Profiles\%U # Windows Internet Name Serving Support Section: # WINS Support - Tells the NMBD component of Samba to enable it's WINS Server ; wins support = yes # WINS Server - Tells the NMBD components of Samba to be a WINS Client # Note: Samba can be either a WINS Server, or a WINS Client, but NOT both ; wins server = w.x.y.z # WINS Proxy - Tells Samba to answer name resolution queries on # behalf of a non WINS capable client, for this to work there must be # at least one WINS Server on the network. The default is NO. ; wins proxy = yes # DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names # via DNS nslookups. The built-in default for versions 1.9.17 is yes, # this has been changed in version 1.9.18 to no. dns proxy = no #============================ Share Definitions =============================[homes] comment = Home Directories browseable = yes writable = yes # Un-comment the following and create the netlogon directory for Domain Logons ; [netlogon] ; comment = Network Logon Service ; path = /usr/local/samba/lib/netlogon ; guest ok = yes ; writable = no ; share modes = no # Un-comment the following to provide a specific roving profile share # the default is to use the user's home directory [Profiles] path = /export/home0 browseable = yes guest ok = yes # NOTE: If you have a BSD-style print system there is no need to # specifically define each individual printer [printers] comment = All Printers path = /usr/spool/samba browseable = no # Set public = yes to allow user 'guest account' to print guest ok = no writable = no printable = yes # This one is useful for people to share files [tmp] comment = Temporary file space path = /export/home0 read only = no public = yes # A publicly accessible directory, but read only, except for people in # the "staff" group [public] comment = Public Stuff path = /export/home0 public = yes writable = yes printable = no write list = @staff # Other examples. # # A private printer, usable only by fred. Spool data will be placed in fred's # home directory. Note that fred must have write access to the spool directory, # wherever it is. ;[fredsprn] ; comment = Fred's Printer ; valid users = fred ; path = /homes/fred ; printer = freds_printer ; public = no ; writable = no ; printable = yes # A private directory, usable only by fred. Note that fred requires write # access to the directory. [fredsdir] comment = Fred's Service path = /export/home0/xxxx (my user account home dir) valid users = xxxx (my account account) public = yes writable = yes printable = no # a service which has a different directory for each machine that connects # this allows you to tailor configurations to incoming machines. You could # also use the %U option to tailor it by user name. # The %m gets replaced with the machine name that is connecting. [pchome] comment = PC Directories path = /export/home0 public = yes writable = yes # A publicly accessible directory, read/write to all users. Note that all files # created in the directory by users will be owned by the default user, so # any user with access can delete any other user's files. Obviously this # directory must be writable by the default user. Another user could of course # be specified, in which case all files would be owned by that user instead. [public] path = /expot/home0 public = yes only guest = yes writable = yes printable = no # The following two entries demonstrate how to share a directory so that two # users can place files there that will be owned by the specific users. In this # setup, the directory should be writable by both users and should have the # sticky bit set on it to prevent abuse. Obviously this could be extended to # as many users as required. [myshare] comment = Mary's and Fred's stuff path = /export/home0/xxxx valid users = xxxx public = yes writable = yes printable = no create mask = 0765 -------------- next part -------------- HTML attachment scrubbed and removed
Christian Barth
2002-Feb-11 07:05 UTC
[Samba] Access to Solaris 8 from NT with Samba - Access Denied.
> > I am new to Samba and I am having problems on setting up a simple share. I > basically need a couple of Win2k workstation to access my Solaris 8 server > and I am getting: > > System error 1240 has occurred. > > The account is not authorized to log in from this station.Probably "encrypted password": Change the w2k-Resistry to send cleartext passwords (the registry-key is in the sources) OR set "encrypted passwords = yes" in smb.conf and set up a smbpasswd file. Christian> > Below is my smb.conf file. If there is something I am missing or if someone > has a simple version of this that I could modify for my env. it would be > greatly appreciated. This is a temp requirement so I am trying not to spend > much time on it. > > Thanks in advance, > > Paul > > > # This is the main Samba configuration file. You should read the > # smb.conf(5) manual page in order to understand the options listed > # here. Samba has a huge number of configurable options (perhaps too > # many!) most of which are not shown in this example > # > # Any line which starts with a ; (semi-colon) or a # (hash) > # is a comment and is ignored. In this example we will use a # > # for commentry and a ; for parts of the config file that you > # may wish to enable > # > # NOTE: Whenever you modify this file you should run the command "testparm" > # to check that you have not many any basic syntactic errors. > # > #======================= Global Settings > ====================================> [global] > > # workgroup = NT-Domain-Name or Workgroup-Name, eg: REDHAT4 > workgroup = VALUEOPTIONS > > # server string is the equivalent of the NT Description field > server string = Samba Server > > # This option is important for security. It allows you to restrict > # connections to machines which are on your local network. The > # following example restricts access to two C class networks and > # the "loopback" interface. For more examples of the syntax see > # the smb.conf man page > hosts allow = xxx.xxx.xxx.xxx (host of Win2K ws) > > # If you want to automatically load your printer list rather > # than setting them up individually then you'll need this > load printers = yes > > # you may wish to override the location of the printcap file > ; printcap name = /etc/printcap > > # on SystemV system setting printcap name to lpstat should allow > # you to automatically obtain a printer list from the SystemV spool > # system > ; printcap name = lpstat > > # It should not be necessary to specify the print system type unless > # it is non-standard. Currently supported print systems include: > # bsd, sysv, plp, lprng, aix, hpux, qnx > ; printing = bsd > > # Uncomment this if you want a guest account, you must add this to > /etc/passwd > # otherwise the user "nobody" is used > guest account = sambates > > # this tells Samba to use a separate log file for each machine > # that connects > log file = /usr/local/samba/var/log.%m > > # Put a capping on the size of the log files (in Kb). > max log size = 50 > > # Security mode. Most people will want user level security. See > # security_level.txt for details. > security = user > > # Use password server option only with security = server > # The argument list may include: > # password server = My_PDC_Name [My_BDC_Name] [My_Next_BDC_Name] > # or to auto-locate the domain controller/s > # password server = * > ; password server = <NT-Server-Name> > > # Note: Do NOT use the now deprecated option of "domain controller" > # This option is no longer implemented. > > # You may wish to use password encryption. Please read > # ENCRYPTION.txt, Win95.txt and WinNT.txt in the Samba documentation. > # Do not enable this option unless you have read those documents > ; encrypt passwords = yes > > # Using the following line enables you to customise your configuration > # on a per machine basis. The %m gets replaced with the netbios name > # of the machine that is connecting > ; include = /usr/local/samba/lib/smb.conf.%m > > # Most people will find that this option gives better performance. > # See speed.txt and the manual pages for details > # You may want to add the following on a Linux system: > # SO_RCVBUF=8192 SO_SNDBUF=8192 > socket options = TCP_NODELAY > > # Configure Samba to use multiple interfaces > # If you have multiple network interfaces then you must list them > # here. See the man page for details. > ; interfaces = 192.168.12.2/24 192.168.13.2/24 > > # Browser Control Options: > # set local master to no if you don't want Samba to become a master > # browser on your network. Otherwise the normal election rules apply > ; local master = no > > # OS Level determines the precedence of this server in master browser > # elections. The default value should be reasonable > ; os level = 33 > > # Domain Master specifies Samba to be the Domain Master Browser. This > # allows Samba to collate browse lists between subnets. Don't use this > # if you already have a Windows NT domain controller doing this job > ; domain master = yes > > # Preferred Master causes Samba to force a local browser election on startup > # and gives it a slightly higher chance of winning the election > ; preferred master = yes > > # Enable this if you want Samba to be a domain logon server for > # Windows95 workstations. > ; domain logons = yes > > # if you enable domain logons then you may want a per-machine or > # per user logon script > # run a specific logon batch file per workstation (machine) > ; logon script = %m.bat > # run a specific logon batch file per username > ; logon script = %U.bat > > # Where to store roving profiles (only for Win95 and WinNT) > # %L substitutes for this servers netbios name, %U is username > # You must uncomment the [Profiles] share below > ; logon path = \\%L\Profiles\%U > > # Windows Internet Name Serving Support Section: > # WINS Support - Tells the NMBD component of Samba to enable it's WINS Server > ; wins support = yes > > # WINS Server - Tells the NMBD components of Samba to be a WINS Client > # Note: Samba can be either a WINS Server, or a WINS Client, but NOT > both > ; wins server = w.x.y.z > > # WINS Proxy - Tells Samba to answer name resolution queries on > # behalf of a non WINS capable client, for this to work there must be > # at least one WINS Server on the network. The default is NO. > ; wins proxy = yes > > # DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names > # via DNS nslookups. The built-in default for versions 1.9.17 is yes, > # this has been changed in version 1.9.18 to no. > dns proxy = no > > #============================ Share Definitions > =============================> [homes] > comment = Home Directories > browseable = yes > writable = yes > > # Un-comment the following and create the netlogon directory for Domain > Logons > ; [netlogon] > ; comment = Network Logon Service > ; path = /usr/local/samba/lib/netlogon > ; guest ok = yes > ; writable = no > ; share modes = no > > > # Un-comment the following to provide a specific roving profile share > # the default is to use the user's home directory > [Profiles] > path = /export/home0 > browseable = yes > guest ok = yes > > > # NOTE: If you have a BSD-style print system there is no need to > # specifically define each individual printer > [printers] > comment = All Printers > path = /usr/spool/samba > browseable = no > # Set public = yes to allow user 'guest account' to print > guest ok = no > writable = no > printable = yes > > # This one is useful for people to share files > [tmp] > comment = Temporary file space > path = /export/home0 > read only = no > public = yes > > # A publicly accessible directory, but read only, except for people in > # the "staff" group > [public] > comment = Public Stuff > path = /export/home0 > public = yes > writable = yes > printable = no > write list = @staff > > # Other examples. > # > # A private printer, usable only by fred. Spool data will be placed in fred's > # home directory. Note that fred must have write access to the spool > directory, > # wherever it is. > ;[fredsprn] > ; comment = Fred's Printer > ; valid users = fred > ; path = /homes/fred > ; printer = freds_printer > ; public = no > ; writable = no > ; printable = yes > > # A private directory, usable only by fred. Note that fred requires write > # access to the directory. > [fredsdir] > comment = Fred's Service > path = /export/home0/xxxx (my user account home dir) > valid users = xxxx (my account account) > public = yes > writable = yes > printable = no > > # a service which has a different directory for each machine that connects > # this allows you to tailor configurations to incoming machines. You could > # also use the %U option to tailor it by user name. > # The %m gets replaced with the machine name that is connecting. > [pchome] > comment = PC Directories > path = /export/home0 > public = yes > writable = yes > > # A publicly accessible directory, read/write to all users. Note that all > files > # created in the directory by users will be owned by the default user, so > # any user with access can delete any other user's files. Obviously this > # directory must be writable by the default user. Another user could of > course > # be specified, in which case all files would be owned by that user instead. > [public] > path = /expot/home0 > public = yes > only guest = yes > writable = yes > printable = no > > # The following two entries demonstrate how to share a directory so that two > # users can place files there that will be owned by the specific users. In > this > # setup, the directory should be writable by both users and should have the > # sticky bit set on it to prevent abuse. Obviously this could be extended to > # as many users as required. > [myshare] > comment = Mary's and Fred's stuff > path = /export/home0/xxxx > valid users = xxxx > public = yes > writable = yes > printable = no > create mask = 0765 > >_(_)_ wWWWw _ @@@@ (_)@(_) vVVVv _ @@@@ (___) _(_)_ @@()@@ wWWWw (_)\ (___) _(_)_ @@()@@ Y (_)@(_) @@@@ (___) `|/ Y (_)@(_) @@@@ \|/ (_)\ / Y \| \|/ /(_) \| |/ | \ | \ |/ | / \ | / \|/ |/ \| \|/ jgs|// \\|/// \\\|//\\\|/// \|/// \\\|// \\|// \\\|// ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^