Foss.KS@forces.ca
2002-Feb-06 11:33 UTC
[Samba] Can browse from windows, but cannot copy TO samba sha res
Good Day, In response to this problem, I believe that I have the answer, though there really isn't a useful solution. I have had this exact same problem with the same errors with Win98SE, WinXP, and Slackware Linux 7.1 as the "sending machine". It is not a Samba problem, but I appear to have tracked it down to an error on the PCI bus. I would assume that your NIC card is PCI, if not tell me, then I still have a problem to track down. If you try any method of file transfer, either using SAMBA or trying to FTP to the Linux box, you will have a similar response. In my case, I replaced the PCI NIC card with at least three different PCI NIC cards with 2 different chipsets. Same problem. Temporarily I used a USB Ethernet adapter which worked smooth, although slow (6 Mbps). I tracked down a PnP ISA NIC card and tried it and away it went at 10 Mbps with no errors. This may not be the optimum solution as most new computers don't have ISA slots and the USB solution makes for slow transfer speeds. The only problem is that the warranty on the motherboard (ASUS CU4VX) ran out a week before I found the actual problem. The fact that you have two different machines (NT and XP) with the same problem is confusing to me as I only had the problem on this one machine and all others worked fine. The moving of the machines may have caused some problems on the motherboard? If you do find another solution or can confirm that my assessment is right or wrong, please let me know as I would like to know. Kevin Foss Ottawa, Canada ---------------------- Message: 11 From: Carson Thoreen <carson_thoreen@hms.harvard.edu> Organization: Harvard Medical School To: samba@lists.samba.org Date: Wed, 6 Feb 2002 12:00:13 -0500 Subject: [Samba] Can browse from windows, but cannot copy TO samba shares Hello, I'm having sporadic trouble copying to a samba share from WinXP and WinNT 4.0 computers (but not all WinNT computers on our network). The samba server is running RH 7.1 linux, kernel 2.4.17, and samba 2.2.3. All computers are on the same subnet. The samba server is the preferred master and is also acting as a WINS server.
Glenn Sieb
2002-Feb-06 11:58 UTC
[Samba] Can browse from windows, but cannot copy TO samba sha res
On 02:26 PM 2/6/2002 -0500, Foss.KS@forces.ca wrote:>I would assume that your NIC card is PCI, if not tell me, >then I still have a problem to track down. If you try any method of file >transfer, either using SAMBA or trying to FTP to the Linux box, you will >have a similar response.Instead of replacing your NIC, try this-- PCI buses can have Master or Slave slots. Some are Master or Slave depending on whether or not there's a "master" type card in the slot next to it, closer to the CPU. NIC PCI cards can be notorious for demanding a "master" position. So never put them in the PCI slot furthest away from the power supply (which is always a "slave" slot), and make sure that it's in an even-numbered slot (starting with 0 closes to the CPU). I sincerely hope this fixes your problem... and helps you grow back some of the hair I'm sure you've pulled out due to this :) Sincerely, Glenn --- Glenn E. Sieb, System Administrator Lumeta Corp. mailto:ges@lumeta.com +1 732 357-3514 (V) +1 732 564-0731 (Fax)