thr3ads.net - rsync - 'error in rsync protocol data stream'

If this information is useful, please help other people find it:
Share via:

Trevor Marshall

2002-Sep-17 17:12 UTC

'error in rsync protocol data stream' - Tim Conway

Tim,
I reported a protocol data stream error on 9/8/2002
Deatils are in my postes at that time
rsync still fails everytime I run it.

This time I added three v's as you just suggested and rsync just hung with
two tasks in execution thus:
root      3178  0.1  0.9  1796  868 pts/1    S    09:57   0:00
/usr/bin/rsync -vvva --delete --exclude=root/snapsh
root      3179  0.0  0.6  1628  632 pts/1    S    09:57   0:00
/usr/bin/rsync -vvva --delete --exclude=root/snapsh

and the last data rsync put out was:
make_file(4,var/adm/fillup-templates/i4l.templ)
make_file(4,var/adm/fillup-templates/i4l_b1.templ)
make_file(4,var/adm/fillup-templates/i4l_default.templ)
make_file(4,var/adm/fillup-templates/i4l_hardware.templ)
make_file(4,var/adm/fillup-templates/i4l_hisax.templ)
make_file(4,var/adm/fillup-templates/i4l_icn.templ)
make_file(4,var/adm/fillup-templates/i4l_ignore.templ)
-----------then hangs---------------------

Any ideas?
Last time I was told to upgrade my hardware and OS.
I run a solid, scrupulously updated, SuSE 7.3 system on reliable P-II/400
hardware

..Trevor Marshall...

At 10:36 AM 9/17/2002 -0600, you wrote:>Certainly, you should upgrade your rsync.  2.4.6 had more than its share 
>of problems.  2.5.5 is generating few complaints.  As far as what's 
>actually happening to you, if it continues after the upgrade, give us 
>another run with more "v"s.
>
>Tim Conway
>tim.conway@philips.com
>303.682.4917 office, 303.921.0301 cell
>Philips Semiconductor - Longmont TC
>1880 Industrial Circle, Suite D
>Longmont, CO 80501
>Available via SameTime Connect within Philips, caesupport2 on AIM
>"There are some who call me.... Tim?"
>
>
>
>
>Pascal Bourguignon <pjb@informatimago.com>
>Sent by: rsync-admin@lists.samba.org
>09/16/2002 11:39 PM
>Please respond to pjb
>
> 
>        To:     rsync@lists.samba.org
>        cc:     (bcc: Tim Conway/LMT/SC/PHILIPS)
>        Subject:        'error in rsync protocol data stream'
>        Classification: 
>
>
>
>Hello,
>
>While doing a local "rsync" with:
>
>      rsync -v -auxHS  --force /      /backup/
>
>(on /backup is mounted another disk), I get these errors:
>
>rsync: error writing 4 unbuffered bytes - exiting: Broken pipe
>rsync error: error in rsync protocol data stream (code 12) at io.c(463)
>rsync: error writing 69 unbuffered bytes - exiting: Broken pipe
>rsync error: error in rsync protocol data stream (code 12) at io.c(463)
>
>
>[pascal@thalassa mnt]$ rsync --version
>rsync  version 2.5.5  protocol version 26
>Copyright (C) 1996-2002 by Andrew Tridgell and others
><http://rsync.samba.org/>
>Capabilities: 64-bit files, socketpairs, hard links, symlinks, batchfiles, 
>
>              IPv6, 64-bit system inums, 64-bit internal inums
>
>
>What's the problem?
>Should I upgrade rsync?
>
>
>-- 
>__Pascal_Bourguignon__                   http://www.informatimago.com/
>----------------------------------------------------------------------
> The name is Baud,...... James Baud.
>-- 
>To unsubscribe or change options: 
>http://lists.samba.org/mailman/listinfo/rsync
>Before posting, read: http://www.tuxedo.org/~esr/faqs/smart-questions.html
>
>
>
>-- 
>To unsubscribe or change options:
http://lists.samba.org/mailman/listinfo/rsync>Before posting, read: http://www.tuxedo.org/~esr/faqs/smart-questions.html
>

Trevor Marshall

2002-Sep-17 17:14 UTC

head link

'error in rsync protocol data stream' - Tim Conway

Tim,
I just got the hung rsync window to respond to a Control-C and it put out
the following text (including a few of those make files that were just
before it hung..

make_file(4,var/adm/fillup-templates/i4l_default.templ)
make_file(4,var/adm/fillup-templates/i4l_hardware.templ)
make_file(4,var/adm/fillup-templates/i4l_hisax.templ)
make_file(4,var/adm/fillup-templates/i4l_icn.templ)
make_file(4,var/adm/fillup-templates/i4l_ignore.templ)
rsync error: received SIGUSR1 or SIGINT (code 20) at rsync.c(229)
_exit_cleanup(code=20, file=rsync.c, line=229): about to call exit(20)
rsync: error writing 70 unbuffered bytes - exiting: Broken pipe
rsync error: error in rsync protocol data stream (code 12) at io.c(463)
_exit_cleanup(code=12, file=io.c, line=463): about to call exit(12)

..trevor..

tim.conway@philips.com

2002-Sep-17 19:04 UTC

head link

'error in rsync protocol data stream' - Tim Conway

I'm sure your system is fine.  What about the rsync, though?  If it's 
still 2.4.6, you're not getting anywhere.  Get the source from 
http://rsync.samba.org/ftp/rsync/rsync-2.5.5.tar.gz
untargz it somewhere, and in the directory it creates, which will be named 
"rsync-2.5.5", type "./configure ; make ; make install"
On a properly-configured Linux system, those three commands should all run 
successfully to completion, leaving you with the rsync binary as 
/usr/local/bin/rsync, and the man pages distributed among /usr/local/man. 
If your existing version is in /usr/bin or something, and you want to 
override it, add "--prefix=/usr" or whatever, to redirect the install.
It's that easy.
If you want to leave off the installation stuff, you can, because the 
binary is fully static and relocatable.
I can't guarantee that this will solve your problems.  Sometimes, 
individual problems can be fixed only by the individual involved.  In my 
application, I finally had to write a custom app, completely abandoning 
rsync, because of the limitations of the platforms I'm required to use.  I 
still use rsync a lot, but as just another tool, like tar, cp, rsh, 
whatever.

Good luck.

Tim Conway
tim.conway@philips.com
303.682.4917 office, 303.921.0301 cell
Philips Semiconductor - Longmont TC
1880 Industrial Circle, Suite D
Longmont, CO 80501
Available via SameTime Connect within Philips, caesupport2 on AIM
"There are some who call me.... Tim?"

Trevor Marshall <tm@well.com>
Sent by: rsync-admin@lists.samba.org
09/17/2002 11:10 AM

        To:     rsync@lists.samba.org
        cc:     (bcc: Tim Conway/LMT/SC/PHILIPS)
        Subject:        Re: 'error in rsync protocol data stream' - Tim
Conway
        Classification: 

Tim,
I reported a protocol data stream error on 9/8/2002
Deatils are in my postes at that time
rsync still fails everytime I run it.

This time I added three v's as you just suggested and rsync just hung with
two tasks in execution thus:
root      3178  0.1  0.9  1796  868 pts/1    S    09:57   0:00
/usr/bin/rsync -vvva --delete --exclude=root/snapsh
root      3179  0.0  0.6  1628  632 pts/1    S    09:57   0:00
/usr/bin/rsync -vvva --delete --exclude=root/snapsh

and the last data rsync put out was:
make_file(4,var/adm/fillup-templates/i4l.templ)
make_file(4,var/adm/fillup-templates/i4l_b1.templ)
make_file(4,var/adm/fillup-templates/i4l_default.templ)
make_file(4,var/adm/fillup-templates/i4l_hardware.templ)
make_file(4,var/adm/fillup-templates/i4l_hisax.templ)
make_file(4,var/adm/fillup-templates/i4l_icn.templ)
make_file(4,var/adm/fillup-templates/i4l_ignore.templ)
-----------then hangs---------------------

Any ideas?
Last time I was told to upgrade my hardware and OS.
I run a solid, scrupulously updated, SuSE 7.3 system on reliable P-II/400
hardware

..Trevor Marshall...

At 10:36 AM 9/17/2002 -0600, you wrote:>Certainly, you should upgrade your rsync.  2.4.6 had more than its share 
>of problems.  2.5.5 is generating few complaints.  As far as what's 
>actually happening to you, if it continues after the upgrade, give us 
>another run with more "v"s.
>
>Tim Conway
>tim.conway@philips.com
>303.682.4917 office, 303.921.0301 cell
>Philips Semiconductor - Longmont TC
>1880 Industrial Circle, Suite D
>Longmont, CO 80501
>Available via SameTime Connect within Philips, caesupport2 on AIM
>"There are some who call me.... Tim?"
>
>
>
>
>Pascal Bourguignon <pjb@informatimago.com>
>Sent by: rsync-admin@lists.samba.org
>09/16/2002 11:39 PM
>Please respond to pjb
>
> 
>        To:     rsync@lists.samba.org
>        cc:     (bcc: Tim Conway/LMT/SC/PHILIPS)
>        Subject:        'error in rsync protocol data stream'
>        Classification: 
>
>
>
>Hello,
>
>While doing a local "rsync" with:
>
>      rsync -v -auxHS  --force /      /backup/
>
>(on /backup is mounted another disk), I get these errors:
>
>rsync: error writing 4 unbuffered bytes - exiting: Broken pipe
>rsync error: error in rsync protocol data stream (code 12) at io.c(463)
>rsync: error writing 69 unbuffered bytes - exiting: Broken pipe
>rsync error: error in rsync protocol data stream (code 12) at io.c(463)
>
>
>[pascal@thalassa mnt]$ rsync --version
>rsync  version 2.5.5  protocol version 26
>Copyright (C) 1996-2002 by Andrew Tridgell and others
><http://rsync.samba.org/>
>Capabilities: 64-bit files, socketpairs, hard links, symlinks, 
batchfiles, >
>              IPv6, 64-bit system inums, 64-bit internal inums
>
>
>What's the problem?
>Should I upgrade rsync?
>
>
>-- 
>__Pascal_Bourguignon__                   http://www.informatimago.com/
>----------------------------------------------------------------------
> The name is Baud,...... James Baud.
>-- 
>To unsubscribe or change options: 
>http://lists.samba.org/mailman/listinfo/rsync
>Before posting, read: 
http://www.tuxedo.org/~esr/faqs/smart-questions.html>
>
>
>-- 
>To unsubscribe or change options:
http://lists.samba.org/mailman/listinfo/rsync>Before posting, read: 
http://www.tuxedo.org/~esr/faqs/smart-questions.html> -- 
To unsubscribe or change options: 
http://lists.samba.org/mailman/listinfo/rsync
Before posting, read: http://www.tuxedo.org/~esr/faqs/smart-questions.html

Possibly Parallel Threads

Search for more apparently analagous threads

rsync - Sep 2002 - 'error in rsync protocol data stream' - Tim Conway

'error in rsync protocol data stream' - Tim Conway

'error in rsync protocol data stream' - Tim Conway

'error in rsync protocol data stream' - Tim Conway

Possibly Parallel Threads