rspec users - Mar 2009 - autospec fails but rake spec tasks pass

I can''t figure out what is causing this problem. I''m using the
latest rspec
and rspec-rails gems on rails 2.3.2.

When I run autospec, the tests in the model spec that I am editing will all
fail. The error messages are like this: 

ActiveRecord::RecordInvalid in ''Job new record should create a new
record
given valid attributes''
Validation failed: 

(Nothing after Validation Failed:, just blank). It doesn''t matter what
attributes I pass to create the new model, and it doesn''t matter if I
do it
using a regular create! method or using Machinist, the same error happens.

Now, if I make a change, autospec will run the specs from that one model
spec again, and they will all pass. Then it runs all of my specs again and
that''s when the specific spec I''m editing fails (only when it
runs all the
specs). When I run rake spec:models or rake spec:controllers, everything
passes as it should. So I figured it might have something to do with the
controller specs, and if I remove those, autospec passes again. Then if I
put the controller specs back, autospec still passes. It only starts failing
if I again edit the model specs.

This is happening in multiple models, not just one. It''s making it
impossible to work with, so I''d really appreciate any thoughts you
might
have. Thank you!



-- 
View this message in context:
http://www.nabble.com/autospec-fails-but-rake-spec-tasks-pass-tp22746792p22746792.html
Sent from the rspec-users mailing list archive at Nabble.com.

I figured out what the problem was. Turns out that the controller specs used
Mocha''s any_instance method to stub valid? and return false (I got this
idea
from a Railscast). Due to the order in which autospec runs the specs,
editing the model spec was causing it to be run after the controller spec,
and the Mocha stubs were still being applied in the model specs. I''m
not
sure if I was doing something wrong, if there is some way to
''clear'' the
stubbed methods that would be great, or perhaps I just shouldn''t use
any_instance.
-- 
View this message in context:
http://www.nabble.com/autospec-fails-but-rake-spec-tasks-pass-tp22746792p22763942.html
Sent from the rspec-users mailing list archive at Nabble.com.

On Sat, Mar 28, 2009 at 11:05 PM, jakepaul <dotjake at gmail.com>
wrote:
>
> I figured out what the problem was. Turns out that the controller specs
used
> Mocha''s any_instance method to stub valid? and return false (I got
this idea
> from a Railscast). Due to the order in which autospec runs the specs,
> editing the model spec was causing it to be run after the controller spec,
> and the Mocha stubs were still being applied in the model specs.
I''m not
> sure if I was doing something wrong, if there is some way to
''clear'' the
> stubbed methods that would be great, or perhaps I just shouldn''t
use
> any_instance.
I haven''t seen the railscast to which you refer, but if you''re
using
mocha instead of rspec''s mock framework, be sure to configure that in
spec_helper.rb (or anywhere that gets loaded before the specs run):

Spec::Runner.configure do |config|
  config.mock_with :mocha
end

If you do that, then the mocha stubs and expectations should get
cleared out after each example runs, eliminating the ordering
dependency that is causing you trouble.

Cheers,
David
> --
> View this message in context:
http://www.nabble.com/autospec-fails-but-rake-spec-tasks-pass-tp22746792p22763942.html
> Sent from the rspec-users mailing list archive at Nabble.com.
>
> _______________________________________________
> rspec-users mailing list
> rspec-users at rubyforge.org
> http://rubyforge.org/mailman/listinfo/rspec-users
>

On Mar 27, 2009, at 4:38 PM, jakepaul wrote:
>
> I can''t figure out what is causing this problem. I''m
using the
> latest rspec
> and rspec-rails gems on rails 2.3.2.
>
> When I run autospec, the tests in the model spec that I am editing  
> will all
> fail. The error messages are like this:
>
> ActiveRecord::RecordInvalid in ''Job new record should create a new
> record
> given valid attributes''
> Validation failed:
>
> (Nothing after Validation Failed:, just blank). It doesn''t matter
what
> attributes I pass to create the new model, and it doesn''t matter
if
> I do it
> using a regular create! method or using Machinist, the same error  
> happens.
>
> Now, if I make a change, autospec will run the specs from that one  
> model
> spec again, and they will all pass. Then it runs all of my specs  
> again and
> that''s when the specific spec I''m editing fails (only
when it runs
> all the
> specs). When I run rake spec:models or rake spec:controllers,  
> everything
> passes as it should. So I figured it might have something to do with  
> the
> controller specs, and if I remove those, autospec passes again. Then  
> if I
> put the controller specs back, autospec still passes. It only starts  
> failing
> if I again edit the model specs.
>
> This is happening in multiple models, not just one. It''s making it
> impossible to work with, so I''d really appreciate any thoughts you
> might
> have. Thank you!
>
Your problem is one of load order.

I''d suggest running the debugger at the start of your failing spec:

it "should ..." do
   require ''rubygems''; require ''ruby-debug'';
debugger

   ...
end

Run the specs in the failing case, and debug from there.

Scott

On Mon, Mar 30, 2009 at 10:48 AM, Scott Taylor <scott at railsnewbie.com>
wrote:
>
> On Mar 27, 2009, at 4:38 PM, jakepaul wrote:
>
>>
>> I can''t figure out what is causing this problem. I''m
using the latest
>> rspec
>> and rspec-rails gems on rails 2.3.2.
>>
>> When I run autospec, the tests in the model spec that I am editing will
>> all
>> fail. The error messages are like this:
>>
>> ActiveRecord::RecordInvalid in ''Job new record should create a
new record
>> given valid attributes''
>> Validation failed:
>>
>> (Nothing after Validation Failed:, just blank). It doesn''t
matter what
>> attributes I pass to create the new model, and it doesn''t
matter if I do
>> it
>> using a regular create! method or using Machinist, the same error
happens.
>>
>> Now, if I make a change, autospec will run the specs from that one
model
>> spec again, and they will all pass. Then it runs all of my specs again
and
>> that''s when the specific spec I''m editing fails (only
when it runs all the
>> specs). When I run rake spec:models or rake spec:controllers,
everything
>> passes as it should. So I figured it might have something to do with
the
>> controller specs, and if I remove those, autospec passes again. Then if
I
>> put the controller specs back, autospec still passes. It only starts
>> failing
>> if I again edit the model specs.
>>
>> This is happening in multiple models, not just one. It''s
making it
>> impossible to work with, so I''d really appreciate any thoughts
you might
>> have. Thank you!
>>
>
> Your problem is one of load order.
>
> I''d suggest running the debugger at the start of your failing
spec:
>
> it "should ..." do
> ?require ''rubygems''; require
''ruby-debug''; debugger
>
> ?...
> end
Or, if you''re using rspec-1.2.2, just:

it "should ...." do
  debugger

and then use the --debugger option on the command line :)

Cheers,
David
>
> Run the specs in the failing case, and debug from there.
>
> Scott
> _______________________________________________
> rspec-users mailing list
> rspec-users at rubyforge.org
> http://rubyforge.org/mailman/listinfo/rspec-users
>