openssh unix dev - Jun 2004 - X11 application fails come up but xclock and xterm come up

debug1: X11 connection requested.
debug2: fd 20 setting TCP_NODELAY
debug2: fd 20 is O_NONBLOCK
debug2: fd 20 is O_NONBLOCK
debug1: channel 3: new [X11 connection from 127.0.0.1 port 47773]
debug1: channel 3: open confirm rwindow 3000 rmax 35840
debug1: server_input_channel_req: channel 3 request exit-status reply 0
debug1: session_by_channel: unknown channel 3
debug1: dump: used 1 session 0 2001c300 channel 0 pid 80374
debug1: dump: used 0 session 0 2001c398 channel 0 pid 0
debug1: dump: used 0 session 0 2001c430 channel 0 pid 0
debug1: dump: used 0 session 0 2001c4c8 channel 0 pid 0
debug1: dump: used 0 session 0 2001c560 channel 0 pid 0
debug1: dump: used 0 session 0 2001c5f8 channel 0 pid 0
debug1: dump: used 0 session 0 2001c690 channel 0 pid 0
debug1: dump: used 0 session 0 2001c728 channel 0 pid 0
debug1: dump: used 0 session 0 2001c7c0 channel 0 pid 0
debug1: dump: used 0 session 0 2001c858 channel 0 pid 0
session_input_channel_req: no session 3 req exit-status
debug1: channel 3: rcvd close
debug1: channel 3: output open -> drain
debug1: channel 3: close_read
debug1: channel 3: input open -> closed
debug3: channel 3: will not send data after close
debug1: channel 3: obuf empty
debug1: channel 3: close_write
debug1: channel 3: output drain -> closed
debug1: channel 3: send close
debug1: channel 3: is dead
debug1: channel 3: garbage collecting
debug1: channel_free: channel 3: X11 connection from 127.0.0.1 port 47773,
nchan
nels 5
debug3: channel_free: status: The following connections are open:\015
  #0 server-session (t4 r0 i0/0 o0/0 fd 16/15)\015
    #2 X11 connection from 127.0.0.1 port 47764 (t4 r1 i0/0 o0/0 fd
18/18)\015
      #3 X11 connection from 127.0.0.1 port 47773 (t4 r7 i3/0 o3/0 fd
20/20)\015
        #4 X11 connection from 127.0.0.1 port 47766 (t4 r3 i0/0 o0/0 fd
21/21)




xClock  debug on SSH server

debug2: channel 4: rcvd adjust 3000
debug2: channel 2: rcvd adjust 3000
debug1: X11 connection requested.
debug2: fd 20 setting TCP_NODELAY
debug2: fd 20 is O_NONBLOCK
debug2: fd 20 is O_NONBLOCK
debug1: channel 3: new [X11 connection from 127.0.0.1 port 47828]
debug1: channel 3: open confirm rwindow 3000 rmax 35840
debug2: channel 2: rcvd adjust 3000