Nut upsuser - Apr 2021 - How to reset "Shutting Down" Status in Tray-App without re-Starting the monitoring (WIN 7) Computer?

>Hi a>ll,
>
[looks like I used an ol mailing list last time, so I try again]
>Question upfront (for those that do not want to read too much text about my
setup):
>
>
>Is there any "trick" how to tell the TRAY APP that the shutdown is
"over" and make it return to another (corrected) status WITHOUT
re-booting?
>
>
Longer Version:
>I am using apcupsdd in a maybe slightly "unusual" setup.
>
>The UPS supplies multiple appliances (like router etc.) in my office:
Router, Switch, NAS, Workstation, and one "Server".
>
>The server, however, is a notebook - yes, you read right, a notebook. That
Notebook can run independently AFTER a shutdown of the UPS for another 4 hours
or so, with a bit more intelligence that I am due to install even maybe 8 hours
or more.
>
>The reason for that setup is that I had a number of "leftover"
Notebooks and, more significant, the server is used as a home automation server,
so the uptime of it should be almost continuosly even when longer power outages
appear, which, unfortunately (and one of the reasons for that setup) occours
multiple times per year in my region (Spain). The goal is that this server wille
running the longest appliance in the whole houshold.
>
>The shutdown of the UPS is NOT the problem. It occours after about 2 hours
when i am also working, after approx. 3-4 hours when I am on travels and
"minimum" charge is on the UPS. By monitoring everything thru the home
server there are even shutdowns / switch off's of other devices such as the
NAS, Work Station or directly attached storage in time to make best use of the
UPS for a very long "survival time" of the home server.
>
>THE ONLY problem I have is, that after a shutdown of the UPS (and in most
cases NOT a shutdown of the server), I cannot "correct" the status in
the tray, which, in case I am away, is a bit uncomfortable when accessing the
server via VNC.
>
>So therefor the question again: Any way to "reset" the status of
the tray without shutting down the machine running apcupsd?
>
>Thanks a lot to help me tweaking out that tiny "bug".
>
>Regards
>J?rgen
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://alioth-lists.debian.net/pipermail/nut-upsuser/attachments/20210430/ed66851c/attachment.htm>

On Fri, 30 Apr 2021, J?rgen Wege via Nut-upsuser wrote:
> Is there any "trick" how to tell the TRAY APP that the shutdown
is "over" and
> make it return to another (corrected) status WITHOUT re-booting?
If the tray app were part of for example Gnome, I would suggest restarting the 
app.  Is there a Windows 7 equivalent of sending SIGHUP to it?

If that doesn't do the job, try asking in a Win 7 forum.

Roger