Steve Ballantyne
2014-Jul-24 18:20 UTC
[Nut-upsuser] RV: About your driver NUTDRV_ATCL_USB(8) for install
I think I may be of some help in this matter. Since I am running a bunch of Raspberry Pi's with NUT and it took a lot of hacking to make it possible. You could probably copy and paste this right into a shell script and just run it ... # Do an rpi-update FIRST to prevent USB strangeness #some depencies from repo sudo apt-get -y install m4 libtool libudev-dev automake #fixing autoconf for later sudo ln -s /usr/share/autoconf/Autom4te /usr/local/share/autoreconf/Autom4te sudo ln -s /usr/bin/autom4te /usr/local/bin/autom4te sudo ln -s /usr/bin/autoconf /usr/local/bin/autoconf sudo ln -s /usr/bin/autoheader /usr/local/bin/autoheader #installing nut dependencies mkdir nut-depends cd ./nut-depends # acscripts from source wget http://sourceforge.net/projects/acscripts.berlios/files/acscripts-0.0.1.13.tar.bz2 tar xf acscripts-0.0.1.13.tar.bz2 sudo mkdir /usr/lib/scripts sudo mv acscripts-0.0.1.13 /usr/lib/scripts/acscripts #autoreconf from source wget http://sourceforge.net/projects/autoreconf/files/0.0.0.1/autoreconf-0.0.0.1.tar.bz2 tar xf autoreconf-0.0.0.1.tar.bz2 cd autoreconf-0.0.0.1 ./configure && sudo make install cd .. #libusb and libusb-compat from source wget "http://downloads.sourceforge.net/project/libusb/libusb-1.0/libusb-1.0.18/libusb-1.0.18.tar.bz2?r=http%3A%2F%2Fwww.libusb.org%2F&ts=1404210716&use_mirror=softlayer-ams" -O libusb-1.0.18.tar.bz2 tar -xjf libusb-1.0.18.tar.bz2 cd libusb-1.0.18 ./configure && sudo make install cd .. wget "http://downloads.sourceforge.net/project/libusb/libusb-compat-0.1/libusb-compat-0.1.4/libusb-compat-0.1.4.tar.bz2?r=http%3A%2F%2Fwww.libusb.org%2F&ts=1404210428&use_mirror=softlayer-ams" -O libusb-compat-0.1.4.tar.bz2 tar -xjf libusb-compat-0.1.4.tar.bz2 cd libusb-compat-0.1.4 ./configure && sudo make install cd .. #get back to home root cd .. #download nut from dev repo git clone git://github.com/networkupstools/nut.git cd nut # Run autogen ./autogen.sh #create some groups and directories and mod some persmissions sudo groupadd nut sudo usermod -a -G nut pi sudo usermod -a -G nut root sudo mkdir /var/run/nut sudo chown root:nut /var/run/nut sudo mkdir -p /var/state/ups sudo chown root:nut /var/state/ups sudo chmod 0770 /var/state/ups #now we ./configure and make it ./configure --without-doc --with-drivers=tripplite_usb,upsdrvctl #still tries to build docs, even though I said NO to docs cp Makefile Makefile.orig sed -i 's/include common clients conf data tools docs drivers/include common clients conf data tools drivers/' Makefile make sudo make install Steve Ballantyne Network Engineer MCSE/MCDST; Novell CLA; LPIC-1; CTT+; A+; Network+; Linux+; Server+; I-Net+; Security+; SonicWALL CSSA On Thu, Jul 24, 2014 at 12:07 PM, <pererivers at yahoo.es> wrote:> Dear Charles, > > Thanks for your quick reply, but I can't install nut_2.7.2 in my raspberry. > > 1) I create a [nut] directory and use wget to download three files: > [nut_2.7.2-1.dsc] [nut_2.7.2.orig.tar.gz] [nut_2.7.2-1.debian.tar.xz] 2)I > unpack: > dpkg-source -x nut_2.7.2-1.dsc > 3) I use command > root at pi1:/nut/nut-2.7.2# debuild -us -uc . > .. > And I have the following error code: > --------------------------------------------- > root at pi1:/nut/nut-2.7.2# debuild -us -uc -d dpkg-buildpackage -rfakeroot -d > -us -uc > dpkg-buildpackage: aviso: est? usando una orden para convertirse en > administrador (?gain-root-command?), a pesar de que ya es el administrador > dpkg-buildpackage: paquete fuente nut > dpkg-buildpackage: versi?n de las fuentes 2.7.2-1 > dpkg-buildpackage: fuentes modificadas por Laurent Bigonville > <bigon at debian.org> dpkg-source --before-build nut-2.7.2 > dpkg-buildpackage: arquitectura del sistema armhf fakeroot debian/rules > clean > debian/rules:3: /usr/share/cdbs/1/rules/debhelper.mk: No existe el fichero o > el directorio > debian/rules:4: /usr/share/cdbs/1/class/autotools.mk: No existe el fichero o > el directorio > debian/rules:5: /usr/share/cdbs/1/class/python-module.mk: No existe el > fichero o el directorio > debian/rules:7: /usr/share/cdbs/1/rules/autoreconf.mk: No existe el fichero > o el directorio > debian/rules:15: /usr/share/cdbs/1/rules/utils.mk: No existe el fichero o el > directorio > make: *** No hay ninguna regla para construir el objetivo > `/usr/share/cdbs/1/rules/utils.mk'. Alto. > dpkg-buildpackage: fallo: fakeroot debian/rules clean devolvi? un estado de > salida de error 2 > debuild: fatal error at line 1357: > dpkg-buildpackage -rfakeroot -d -us -uc failed root at pi1:/nut/nut-2.7.2# > ---------------------------------------------------------- > > Any idea? what am I doing wrong. > I don't have installed 'apt-src' command to install dependencies. > > Best regards, > Pere Rius > > > > -----Mensaje original----- > De: Charles Lepple [mailto:clepple at gmail.com] Enviado el: jueves, 17 de > julio de 2014 14:41 > Para: pere at riusnebot.com > CC: NUT List > Asunto: Re: About your driver NUTDRV_ATCL_USB(8) for install > > On Jul 13, 2014, at 9:46 AM, pere at riusnebot.com wrote: > >> Dear Charles Lepple, >> Sorry for my email intrusion. > > for next time: > > http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser > >> I have an UPS called Ovislink 1000VA and it use a UPSMART2000R (with ?ATCL > FOR UPS?). >> I?m a beginner Linux user and I ?will install your new driver > <nutdrv_atcl_usb > to work with networkupstools.org, but I can?t. >> >> We have a raspberry pi with debian, and I only installed a ?nut? with > version: >> >> ii nut 2.6.4-2.3+de all network UPS tools - > metapackage >> ii nut-client 2.6.4-2.3+de armhf network UPS tools - clients >> ii nut-server 2.6.4-2.3+de armhf network UPS tools - core > system >> >> ? But it not contain your NUTDRV_ATCL_USB to put in my ups.conf file >> configuration >> >> Could you help me how we can use your new driver ATCL FOR UPS? I don?t > know how install unstable 2.7.2-1 version in RaspBerry that I think that > contents this new driver. > > There are a few options, depending on whether you prefer packages, or if you > need to install this quickly. > > One way might be to request a backport. I have no experience with this > particular group, but you could try requesting here: > http://sourceforge.net/p/raspbian-backports/suggestions/ > > Another way is to download the Debian source files for 2.7.2-1 from > https://packages.debian.org/sid/nut (three links under "Download Source > Package" in the right sidebar) and use 'debuild -us -uc' from the devscripts > package. > > Since I needed to build from the latest code, I used 'apt-src' to install > the build dependencies. Note that this will require a fair amount of free > space on your SD card (I am using a 4GB card with Raspbian). In > /etc/apt/sources.list, copy the first line, and change 'deb' to 'deb-src' > like so: > > deb http://mirrordirector.raspbian.org/raspbian/ wheezy main contrib > non-free rpi deb-src http://mirrordirector.raspbian.org/raspbian/ wheezy > main contrib non-free rpi > > Then run 'sudo apt-src install nut'. This downloads the packages needed to > build NUT 2.6.4, but then you would want to grab the newer NUT 2.7.2 > package. You may also want to remove the nut* .deb binary packages to avoid > confusion. > > Unpack nut-2.7.2.tar.gz, and follow the installation instructions here: > http://www.networkupstools.org/docs/user-manual.chunked/ar01s05.html > > If you need help, please subscribe to the nut-upsuser list and describe the > problem there. > > -- > Charles Lepple > clepple at gmail > > > > > --- > Aquest correu electr?nic est? lliure de virus perqu? la protecci? de l'avast! Antivirus est? habilitada. > http://www.avast.com > > > _______________________________________________ > Nut-upsuser mailing list > Nut-upsuser at lists.alioth.debian.org > http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser
Charles Lepple
2014-Jul-25 03:02 UTC
[Nut-upsuser] About your driver NUTDRV_ATCL_USB(8) for install
On Jul 24, 2014, at 2:20 PM, Steve Ballantyne <steve.ballantyne at gmail.com> wrote:> #now we ./configure and make it > ./configure --without-doc --with-drivers=tripplite_usb,upsdrvctlPere: if you do build manually from source, you'll want to replace tripplite_usb with nutdrv_atcl_usb here. (I would still recommend trying to get apt-src to work.)> #still tries to build docs, even though I said NO to docs > cp Makefile Makefile.orig > sed -i 's/include common clients conf data tools docs drivers/include > common clients conf data tools drivers/' MakefileShouldn't be necessary for a tarball install (docs are already included). I would also recommend using libusb-0.1.12 (build against libusb-dev in Debian). We haven't done as much testing with libusb-1.0 and libusb-compat. -- Charles Lepple clepple at gmail
PERE (yahoo.es)
2015-Feb-09 11:48 UTC
[Nut-upsuser] RV: About your driver NUTDRV_ATCL_USB(8) for install
Dear Steve,
Thanks.
Until today I could not install the nut in my raspberry. All installation good,
but with my ups " Ovislink Chrome 1000VA" and
"nutdrv_atcl_usb" driver, it inform me the following error details.
I can startup nut but nutmon don't receive anything only (lost conection).
My setup:
root at pi1:/nut# lsusb
Bus 001 Device 002: ID 0424:9512 Standard Microsystems Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 0424:ec00 Standard Microsystems Corp.
Bus 001 Device 006: ID 0001:0000 Fry's Electronics <------------- my UPS
ups.conf
[ups]
driver = nutdrv_atcl_usb
port=auto
vendor="ATCL FOR UPS"
desc= "Ovislink"
Script
root at pi1:/nut# sudo /usr/local/ups/bin/nutdrv_atcl_usb -u root -a ups -DDDD
--------------------------------------------------------
Network UPS Tools - 'ATCL FOR UPS' USB driver 1.1
(2.7.2-signed-159-g4552d14)
Warning: This is an experimental driver.
Some features may not function correctly.
0.000000 debug level is '4'
0.011253 Searching for USB device...
0.015400 Checking USB device [0001:0000] (001/006)
0.022269 - VendorID : 0001
0.023193 - ProductID : 0000
0.023865 - Manufacturer : ATCL FOR UPS
0.024616 - Product : ATCL FOR UPS
0.025382 - Serial Number: ATCL FOR UPS
0.026048 - Bus : 001
0.027090 Matched expected vendor='ATCL FOR UPS'.
0.028188 Can't set USB configuration: could not set config 1: Device
or resource busy
0.029246 detached kernel driver from USB device...
0.030559 USB device [0001:0000] opened
0.866216 read: (8 bytes) => 03 00 00 00 00 00 00 00
0.866413 reply[0] = 0x03 -> OL
0.867461 dstate_init: sock /var/state/ups/nutdrv_atcl_usb-ups open on fd
5
1.914346 read: (8 bytes) => 03 00 00 00 00 00 00 00
1.915850 reply[0] = 0x03 -> OL
5.872047 status interrupt read: error submitting URB: Device or resource
busy
5.872261 Communications with UPS lost: Query to UPS failed
10.874345 Checking USB device [0001:0000] (001/006)
10.882134 - VendorID : 0001
10.883544 - ProductID : 0000
10.884823 - Manufacturer : ATCL FOR UPS
10.886326 - Product : ATCL FOR UPS
10.886903 - Serial Number: ATCL FOR UPS
10.887851 - Bus : 001
10.888155 Matched expected vendor='ATCL FOR UPS'.
10.888834 Can't set USB configuration: could not set config 1: Device
or resource busy
10.891625 detached kernel driver from USB device...
10.892958 USB device [0001:0000] opened
11.351356 read: (8 bytes) => 03 00 00 00 00 00 00 00
11.351560 Communications with UPS re-established
11.351703 reply[0] = 0x03 -> OL
15.877029 status interrupt read: error submitting URB: Device or resource
busy
15.877214 Communications with UPS lost: Query to UPS failed
20.878831 Checking USB device [0001:0000] (001/006)
20.886566 - VendorID : 0001
20.888713 - ProductID : 0000
20.890007 - Manufacturer : ATCL FOR UPS
20.890830 - Product : ATCL FOR UPS
20.891162 - Serial Number: ATCL FOR UPS
20.891345 - Bus : 001
20.891517 Matched expected vendor='ATCL FOR UPS'.
20.892619 Can't set USB configuration: could not set config 1: Device
or resource busy
20.893105 detached kernel driver from USB device...
---------------------------------------------
with the following command root at pi1:/nut# sudo /usr/local/ups/sbin/upsc ups
at localhost I don't receive anything (only time out).
Somebody know if my "Ovislink Chrome" ups can work with
NUTDRV_ATCL_USB drivers? I tray with usbhid-ups, blazer_usb without luck.
Best regards,
Pere Rius
-----Mensaje original-----
De: Steve Ballantyne [mailto:steve.ballantyne at gmail.com]
Enviado el: jueves, 24 de julio de 2014 20:21
Para: pererivers at yahoo.es
CC: NUT List
Asunto: Re: [Nut-upsuser] RV: About your driver NUTDRV_ATCL_USB(8) for install
I think I may be of some help in this matter. Since I am running a bunch of
Raspberry Pi's with NUT and it took a lot of hacking to make it possible.
You could probably copy and paste this right into a shell script and just run it
...
# Do an rpi-update FIRST to prevent USB strangeness
#some depencies from repo
sudo apt-get -y install m4 libtool libudev-dev automake
#fixing autoconf for later
sudo ln -s /usr/share/autoconf/Autom4te /usr/local/share/autoreconf/Autom4te
sudo ln -s /usr/bin/autom4te /usr/local/bin/autom4te sudo ln -s
/usr/bin/autoconf /usr/local/bin/autoconf sudo ln -s /usr/bin/autoheader
/usr/local/bin/autoheader
#installing nut dependencies
mkdir nut-depends
cd ./nut-depends
# acscripts from source
wget
http://sourceforge.net/projects/acscripts.berlios/files/acscripts-0.0.1.13.tar.bz2
tar xf acscripts-0.0.1.13.tar.bz2
sudo mkdir /usr/lib/scripts
sudo mv acscripts-0.0.1.13 /usr/lib/scripts/acscripts
#autoreconf from source
wget
http://sourceforge.net/projects/autoreconf/files/0.0.0.1/autoreconf-0.0.0.1.tar.bz2
tar xf autoreconf-0.0.0.1.tar.bz2
cd autoreconf-0.0.0.1
./configure && sudo make install
cd ..
#libusb and libusb-compat from source
wget
"http://downloads.sourceforge.net/project/libusb/libusb-1.0/libusb-1.0.18/libusb-1.0.18.tar.bz2?r=http%3A%2F%2Fwww.libusb.org%2F&ts=1404210716&use_mirror=softlayer-ams"
-O libusb-1.0.18.tar.bz2
tar -xjf libusb-1.0.18.tar.bz2
cd libusb-1.0.18
./configure && sudo make install
cd ..
wget
"http://downloads.sourceforge.net/project/libusb/libusb-compat-0.1/libusb-compat-0.1.4/libusb-compat-0.1.4.tar.bz2?r=http%3A%2F%2Fwww.libusb.org%2F&ts=1404210428&use_mirror=softlayer-ams"
-O libusb-compat-0.1.4.tar.bz2
tar -xjf libusb-compat-0.1.4.tar.bz2
cd libusb-compat-0.1.4
./configure && sudo make install
cd ..
#get back to home root
cd ..
#download nut from dev repo
git clone git://github.com/networkupstools/nut.git
cd nut
# Run autogen
./autogen.sh
#create some groups and directories and mod some persmissions sudo groupadd nut
sudo usermod -a -G nut pi sudo usermod -a -G nut root sudo mkdir /var/run/nut
sudo chown root:nut /var/run/nut sudo mkdir -p /var/state/ups sudo chown
root:nut /var/state/ups sudo chmod 0770 /var/state/ups
#now we ./configure and make it
./configure --without-doc --with-drivers=tripplite_usb,upsdrvctl
#still tries to build docs, even though I said NO to docs cp Makefile
Makefile.orig sed -i 's/include common clients conf data tools docs
drivers/include common clients conf data tools drivers/' Makefile
make
sudo make install
Steve Ballantyne
Network Engineer
MCSE/MCDST; Novell CLA; LPIC-1; CTT+; A+; Network+; Linux+; Server+;
I-Net+; Security+; SonicWALL CSSA
On Thu, Jul 24, 2014 at 12:07 PM, <pererivers at yahoo.es>
wrote:> Dear Charles,
>
> Thanks for your quick reply, but I can't install nut_2.7.2 in my
raspberry.
>
> 1) I create a [nut] directory and use wget to download three files:
> [nut_2.7.2-1.dsc] [nut_2.7.2.orig.tar.gz] [nut_2.7.2-1.debian.tar.xz]
> 2)I
> unpack:
> dpkg-source -x nut_2.7.2-1.dsc
> 3) I use command
> root at pi1:/nut/nut-2.7.2# debuild -us -uc .
> ..
> And I have the following error code:
> ---------------------------------------------
> root at pi1:/nut/nut-2.7.2# debuild -us -uc -d dpkg-buildpackage
> -rfakeroot -d -us -uc
> dpkg-buildpackage: aviso: est? usando una orden para convertirse en
> administrador (?gain-root-command?), a pesar de que ya es el
> administrador
> dpkg-buildpackage: paquete fuente nut
> dpkg-buildpackage: versi?n de las fuentes 2.7.2-1
> dpkg-buildpackage: fuentes modificadas por Laurent Bigonville
> <bigon at debian.org> dpkg-source --before-build nut-2.7.2
> dpkg-buildpackage: arquitectura del sistema armhf fakeroot
> debian/rules clean
> debian/rules:3: /usr/share/cdbs/1/rules/debhelper.mk: No existe el
> fichero o el directorio
> debian/rules:4: /usr/share/cdbs/1/class/autotools.mk: No existe el
> fichero o el directorio
> debian/rules:5: /usr/share/cdbs/1/class/python-module.mk: No existe el
> fichero o el directorio
> debian/rules:7: /usr/share/cdbs/1/rules/autoreconf.mk: No existe el
> fichero o el directorio
> debian/rules:15: /usr/share/cdbs/1/rules/utils.mk: No existe el
> fichero o el directorio
> make: *** No hay ninguna regla para construir el objetivo
> `/usr/share/cdbs/1/rules/utils.mk'. Alto.
> dpkg-buildpackage: fallo: fakeroot debian/rules clean devolvi? un
> estado de salida de error 2
> debuild: fatal error at line 1357:
> dpkg-buildpackage -rfakeroot -d -us -uc failed
> root at pi1:/nut/nut-2.7.2#
> ----------------------------------------------------------
>
> Any idea? what am I doing wrong.
> I don't have installed 'apt-src' command to install
dependencies.
>
> Best regards,
> Pere Rius
>
>
>
> -----Mensaje original-----
> De: Charles Lepple [mailto:clepple at gmail.com] Enviado el: jueves, 17
> de julio de 2014 14:41
> Para: pere at riusnebot.com
> CC: NUT List
> Asunto: Re: About your driver NUTDRV_ATCL_USB(8) for install
>
> On Jul 13, 2014, at 9:46 AM, pere at riusnebot.com wrote:
>
>> Dear Charles Lepple,
>> Sorry for my email intrusion.
>
> for next time:
>
> http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser
>
>> I have an UPS called Ovislink 1000VA and it use a UPSMART2000R (with
>> ?ATCL
> FOR UPS?).
>> I?m a beginner Linux user and I ?will install your new driver
> <nutdrv_atcl_usb > to work with networkupstools.org, but I can?t.
>>
>> We have a raspberry pi with debian, and I only installed a ?nut?
>> with
> version:
>>
>> ii nut 2.6.4-2.3+de all network UPS tools -
> metapackage
>> ii nut-client 2.6.4-2.3+de armhf network UPS tools -
clients
>> ii nut-server 2.6.4-2.3+de armhf network UPS tools - core
> system
>>
>> ? But it not contain your NUTDRV_ATCL_USB to put in my ups.conf file
>> configuration
>>
>> Could you help me how we can use your new driver ATCL FOR UPS? I
>> don?t
> know how install unstable 2.7.2-1 version in RaspBerry that I think
> that contents this new driver.
>
> There are a few options, depending on whether you prefer packages, or
> if you need to install this quickly.
>
> One way might be to request a backport. I have no experience with this
> particular group, but you could try requesting here:
> http://sourceforge.net/p/raspbian-backports/suggestions/
>
> Another way is to download the Debian source files for 2.7.2-1 from
> https://packages.debian.org/sid/nut (three links under "Download
> Source Package" in the right sidebar) and use 'debuild -us
-uc' from
> the devscripts package.
>
> Since I needed to build from the latest code, I used 'apt-src' to
> install the build dependencies. Note that this will require a fair
> amount of free space on your SD card (I am using a 4GB card with
> Raspbian). In /etc/apt/sources.list, copy the first line, and change
'deb' to 'deb-src'
> like so:
>
> deb http://mirrordirector.raspbian.org/raspbian/ wheezy main contrib
> non-free rpi deb-src http://mirrordirector.raspbian.org/raspbian/
> wheezy main contrib non-free rpi
>
> Then run 'sudo apt-src install nut'. This downloads the packages
> needed to build NUT 2.6.4, but then you would want to grab the newer
> NUT 2.7.2 package. You may also want to remove the nut* .deb binary
> packages to avoid confusion.
>
> Unpack nut-2.7.2.tar.gz, and follow the installation instructions here:
> http://www.networkupstools.org/docs/user-manual.chunked/ar01s05.html
>
> If you need help, please subscribe to the nut-upsuser list and
> describe the problem there.
>
> --
> Charles Lepple
> clepple at gmail
>
>
>
>
> ---
> Aquest correu electr?nic est? lliure de virus perqu? la protecci? de
l'avast! Antivirus est? habilitada.
> http://www.avast.com
>
>
> _______________________________________________
> Nut-upsuser mailing list
> Nut-upsuser at lists.alioth.debian.org
> http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser
Charles Lepple
2015-Feb-09 13:56 UTC
[Nut-upsuser] About your driver NUTDRV_ATCL_USB(8) for install
On Feb 9, 2015, at 6:48 AM, PERE (yahoo.es) <pererivers at yahoo.es> wrote:> 0.028188 Can't set USB configuration: could not set config 1: Device or resource busy > 0.029246 detached kernel driver from USB device... > 0.030559 USB device [0001:0000] opened > 0.866216 read: (8 bytes) => 03 00 00 00 00 00 00 00 > 0.866413 reply[0] = 0x03 -> OL > 0.867461 dstate_init: sock /var/state/ups/nutdrv_atcl_usb-ups open on fd 5 > 1.914346 read: (8 bytes) => 03 00 00 00 00 00 00 00 > 1.915850 reply[0] = 0x03 -> OL > 5.872047 status interrupt read: error submitting URB: Device or resource busy"Device or resource busy" usually means that another kernel driver or userspace program is accessing the same device. Check for another copy of nutdrv_atcl_usb. Which Raspberry Pi distribution are you using, and what is the kernel version? -- Charles Lepple clepple at gmail