Nut upsuser - Aug 2012 - NUT with pfsense 2.0.1

Hi all

I need to control an UPS TSSahara usign NUT in pfsense and it is not
working.

Can somenone help ?

ups.conf

user=root
[tsshara]
driver = megatec_usb
port = auto
vendorid = 0483
productid = 0035

desc = "No Break TS-Shara"

[myups]
driver=usbhid-ups
port=auto



/usr/local/libexec/nut/megatec_usb -u root -a tsshara -DD



Network UPS Tools 2.2.2 - Megatec protocol driver 1.5.14 [megatec_usb]
Carlos Rodrigues (c) 2003-2008

Serial-over-USB transport layer for Megatec protocol driver [megatec_usb]
Andrey Lelikov (c) 2006, Alexander Gordeev (c) 2006-2007, Jon Gough (c) 2007

debug level is '2'
Checking device (0483/0035) (/dev/usb//dev/ugen2.2)
- VendorID: 0483
- ProductID: 0035
- Manufacturer: STMicroelectronics
- Product: ST7 RS232 USB BRIDGE
- Serial Number: unknown
- Bus: /dev/usb
Trying to match device
Device does not match - skipping
Checking device (0000/0000) (/dev/usb//dev/ugen4.1)
- VendorID: 0000
- ProductID: 0000
- Manufacturer: Intel
- Product: EHCI root HUB
- Serial Number: unknown
- Bus: /dev/usb
Trying to match device
Device does not match - skipping
Checking device (0000/0000) (/dev/usb//dev/ugen3.1)
- VendorID: 0000
- ProductID: 0000
- Manufacturer: Intel
- Product: UHCI root HUB
- Serial Number: unknown
- Bus: /dev/usb
Trying to match device
Device does not match - skipping
Checking device (0000/0000) (/dev/usb//dev/ugen2.1)
- VendorID: 0000
- ProductID: 0000
- Manufacturer: Intel
- Product: UHCI root HUB
- Serial Number: unknown
- Bus: /dev/usb
Trying to match device
Device does not match - skipping
Checking device (0000/0000) (/dev/usb//dev/ugen1.1)
- VendorID: 0000
- ProductID: 0000
- Manufacturer: Intel
- Product: UHCI root HUB
- Serial Number: unknown
- Bus: /dev/usb
Trying to match device
Device does not match - skipping
Checking device (0000/0000) (/dev/usb//dev/ugen0.1)
- VendorID: 0000
- ProductID: 0000
- Manufacturer: Intel
- Product: UHCI root HUB
- Serial Number: unknown
- Bus: /dev/usb
Trying to match device
Device does not match - skipping
No appropriate HID device found
No supported devices found. Please check your device availability with
'lsusb'
and make sure you have an up-to-date version of NUT. If this does not help,
try running the driver with at least 'vendorid' and 'subdriver'
options
specified. Please refer to the man page for details about these options
(man 8 megatec_usb).
Please report your results to the NUT user's mailing list
<nut-upsuser at lists.alioth.debian.org>.



Atenciosamente

C?cero Jacobi Filho

j4c0b1 at gmail.com
+55-48-96537527 (TIM)
+55-48-30245005
skype : cjacobi
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.alioth.debian.org/pipermail/nut-upsuser/attachments/20120829/86ff7407/attachment.html>

[Please subscribe to the list before replying:
http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser ]

On Aug 29, 2012, at 9:06 AM, J4c0b1 wrote:
> Hi all
> 
> I need to control an UPS TSSahara usign NUT in pfsense and it is not
working.
What version of *BSD is your version of pfsense based on?

Also note that the megatec_usb driver has been superseded by the blazer_usb
driver. You should be able to compile a newer version of NUT from source without
any additional packages (unless you need CGI graphing support, and then the
ports tree might help). You seem to be running 2.2.2, and we are up to 2.6.5
now.

-- 
Charles Lepple
clepple at gmail