Hello all, There is a new Windows package of NUT. It now contains nut-scanner binary. Note that there is a known issue with libupsclient.dll with nut-scanner. The scan of NUT servers using nut-scanner will not work for now. You can find it at : http://www.networkupstools.org/source/2.6/NUT-Installer-2.6.3-1.msi Please send feedback to the list. Regards, Fred -- Team Open Source Eaton - http://powerquality.eaton.com --------------------------------------------------------------------------
Hello Fred, thanks for this package! I'm glad that we did not have to wait for 2.6.4. Is there any windows-specific changelog for this version? What about x64 version? Windows 2003 x64 doesn't have 32-bit shutdown.exe, so we have to use tricky MS fixes or third-party tools such as pstools. NUT x64 will ultimately solve this problem. Regards, Dmitry 2012/4/27 Fr?d?ric Boh? <fredericbohe at eaton.com>:> Hello all, > > There is a new Windows package of NUT. > > It now contains nut-scanner binary. > > Note that there is a known issue with libupsclient.dll with nut-scanner. > The scan of NUT servers using nut-scanner will not work for now. > > You can find it at : > http://www.networkupstools.org/source/2.6/NUT-Installer-2.6.3-1.msi > > Please send feedback to the list. > > Regards, > Fred > > -- > Team Open Source Eaton - http://powerquality.eaton.com > > -------------------------------------------------------------------------- > > _______________________________________________ > Nut-upsuser mailing list > Nut-upsuser at lists.alioth.debian.org > http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser
Hi again, I have a problem ? NUT won't restart after short power failure. Steps to reproduce: 1. Start NUT. We get "Starting" and "Startup succesful" in syslog. 2. Disconnect line power cord from UPS, wait for awhile, and connect it back. We got "On battery", "Timer started", "On line", "Timer cancelled", "Query empty, exiting" in syslog. After that NUT works OK. 3. Restart NUT service. We get "Starting" in syslog, but no "Startup succesful". Now it doesn't work, upsmon.exe isn't running. How to ressurect it: stop service, delete %nut%\var\run\upsmon.pid, start service. My upsmon.conf: MONITOR test at 10.35.0.180 1 upsmonuser mypassword slave MINSUPPLIES 1 SHUTDOWNCMD "C:\\NUT\\shutdown.bat" NOTIFYCMD "C:\\NUT\\sbin\\upssched.exe" POLLFREQ 5 POLLFREQALERT 5 HOSTSYNC 15 DEADTIME 15 POWERDOWNFLAG /etc/killpower NOTIFYMSG ONLINE "ONLINE" NOTIFYMSG ONBATT "ONBATT" NOTIFYFLAG ONLINE SYSLOG+WALL+EXEC NOTIFYFLAG ONBATT SYSLOG+WALL+EXEC RBWARNTIME 43200 NOCOMMWARNTIME 300 FINALDELAY 5 Thanks in advance. Also, one little thing: upssched.conf.sample has Unix EOLs and cannot be edited properly with built-in notepad.exe. I think it should has Windows EOLs. Regards, Dmitry 2012/4/27 Fr?d?ric Boh? <fredericbohe at eaton.com>:> Hello all, > > There is a new Windows package of NUT. > > It now contains nut-scanner binary. > > Note that there is a known issue with libupsclient.dll with nut-scanner. > The scan of NUT servers using nut-scanner will not work for now. > > You can find it at : > http://www.networkupstools.org/source/2.6/NUT-Installer-2.6.3-1.msi > > Please send feedback to the list. > > Regards, > Fred > > -- > Team Open Source Eaton - http://powerquality.eaton.com
Hello, snmp-ups won't run without libnetsnmp-30.dll, but NUT doesn't contain such file, and I can't find it over the Internet. Renaming libnetsnmp.dll to libnetsnmp-30.dll doesn't work, snmp-ups runs but can't connect to my Symmetra. C:\NUT\bin>snmp-ups -a central Network UPS Tools - Generic SNMP UPS driver 0.66 (2.6.3-3534:3540M) No matching MIB found for sysOID '.1.3.6.1.4.1.318.1.3.23.1'! Please report it to NUT developers, with an 'upsc' output for your device. Going back to the classic MIB detection method. Detected Symmetra 48K on host 10.35.200.80 (mib: apcc 1.1) ... and stucks. C:\NUT\bin>upsc central Error: Connection failure: Unknown error My ups.conf: [central] driver = snmp-ups port = 10.35.200.80 community = public Is snmp-ups implemented in Windows? If yes, where can I find libnetsnmp-30.dll? Thanks. Regards, Dmitry. 2012/4/27 Fr?d?ric Boh? <fredericbohe at eaton.com>:> Hello all, > > There is a new Windows package of NUT. > > It now contains nut-scanner binary. > > Note that there is a known issue with libupsclient.dll with nut-scanner. > The scan of NUT servers using nut-scanner will not work for now. > > You can find it at : > http://www.networkupstools.org/source/2.6/NUT-Installer-2.6.3-1.msi > > Please send feedback to the list. > > Regards, > Fred > > -- > Team Open Source Eaton - http://powerquality.eaton.com > > -------------------------------------------------------------------------- > > _______________________________________________ > Nut-upsuser mailing list > Nut-upsuser at lists.alioth.debian.org > http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser