[please keep the list CC'd. Thanks!]
On Oct 17, 2012, at 4:03 AM, J?rg Bous wrote:
> Hello Charles,
>
> Longer time I had no chance to continue this topic, now i finally want to
get it running.
>
> I have downloaded and installed Windows MSI installer 2.6.5-3 on Windows
Vista PC.
> below you will find the content of the CONF files which I created.
Hi J?rg,
I haven't used the Windows port of NUT - I was only providing links to the
configuration information which is common between the original NUT source code
and the Windows port. Hopefully someone else can help with the Windows
questions.
> Then I go to NUT and press "start service"
> I shortly see a window popping up, but even do not see the content, and
nothing happen then
>
> My question is how to start NUT, where to see some feedback from software,
any possibility to start graphical software?
>
>
> nut.conf
>
> MODE=standalone
>
>
> ups.conf
>
> [thisups]
> driver = blazer_usb
> port = auto
> desc = "PowerWalker VI 850 LCD"
> default.battery.voltage.high = 13.5
> default.battery.voltage.low = 10
>
>
> upsd.conf
>
> LISTEN 127.0.0.1 3493
>
>
> upsd.users
>
> [thisuser]
> password = administrator
> actions = set
> instcmds = all
> upsmon master
>
>
> upsmon.conf
>
> MONITOR myups at localhost 1 thisuser administrator master
> MINSUPPLIES 1
> SHUTDOWNCMD "/sbin/shutdown -h +0"
> NOTIFYCMD /usr/local/sbin/upssched
> NOTIFYFLAG ONBATT SYSLOG+EXEC
> NOTIFYFLAG ONLINE SYSLOG+EXEC
> POLLFREQ 5
> POLLFREQALERT 5
> HOSTSYNC 15
> DEADTIME 15
> POWERDOWNFLAG /etc/killpower
> RBWARNTIME 43200
> NOCOMMWARNTIME 300
> FINALDELAY 5
>
>
> upssched.conf
>
> MDSCRIPT /usr/local/bin/upssched-cmd
> PIPEFN /var/state/ups/upssched/upssched.pipe
> LOCKFN /var/state/ups/upssched/upssched.lock
> AT ONBATT * EXECUTE power-off
> AT ONBATT * START-TIMER power-still-off 30
> AT ONLINE * CANCEL-TIMER power-still-off
> AT ONLINE * EXECUTE power-on
>
>
> Best regards
> J?rg Bous
>
> -----Urspr?ngliche Nachricht-----
> Von: Charles Lepple [mailto:clepple at gmail.com]
> Gesendet: Donnerstag, 5. Januar 2012 05:09
> An: J?rg Bous
> Cc: nut-upsuser Mailing List
> Betreff: Re: [Nut-upsuser] Windows MSI installer 2.6.1-1
>
> On Jan 3, 2012, at 8:35 AM, J?rg Bous wrote:
>
>> If possible I would like to use the PowerWalker Line-Interactive VI
1400 device which should work with blazer_usb
>>
>> Does anyone have possibility to provide me the correct configuration
for the files (ups.conf, upsd.{users,conf} and upsmon.conf) ?
>> It would be great if you could explain to me how to get NUT working
>
> Have you had a chance to read the documentation that Arnaud pointed you to?
This page walks you through basic to advanced configuration:
>
> http://www.networkupstools.org/docs/user-manual.chunked/ar01s06.html
>
> http://www.networkupstools.org/docs/man/ups.conf.html talks about ups.conf.
>
> http://www.networkupstools.org/docs/man/blazer.html mentions options
specific to blazer_usb.
>
> When you say that you tried to configure NUT, what did you change, and what
were the errors?
>
> --
> Charles Lepple
> clepple at gmail
>
>
>
>
>
>
--
Charles Lepple
clepple at gmail