I've been a NUT user for a while, on Linux, and I've been very pleased
with the performance of it. I have a new machine here, that runs
NetBSD, and I've been having fits with that.
First, NetBSD has NUT 2.0.5 in the pkgsrc collection, and I don't
really want to mess with that, since it's so far out of date. So, I
built NUT 2.4.1, from source. All is well there, but I can't get NUT
to detect my UPS. I get the following USB devices detected, when I
plug in the UPS:
uhidev3 at uhub3 port 1 configuration 1 interface 0
uhidev3: Belkin Belkin UPS, rev 1.10/0.01, addr 2, iclass 3/0
uhidev3: 62 report ids
uhid1 at uhidev3 reportid 1: input=0, output=0, feature=1
uhid2 at uhidev3 reportid 2: input=0, output=0, feature=1
uhid3 at uhidev3 reportid 3: input=0, output=0, feature=2
uhid4 at uhidev3 reportid 4: input=0, output=0, feature=2
uhid5 at uhidev3 reportid 6: input=0, output=0, feature=2
uhid6 at uhidev3 reportid 7: input=0, output=0, feature=2
uhid7 at uhidev3 reportid 8: input=0, output=0, feature=2
uhid8 at uhidev3 reportid 9: input=0, output=0, feature=2
uhid9 at uhidev3 reportid 10: input=0, output=0, feature=2
uhid10 at uhidev3 reportid 11: input=0, output=0, feature=2
uhid11 at uhidev3 reportid 13: input=0, output=0, feature=2
uhid12 at uhidev3 reportid 14: input=0, output=0, feature=2
uhid13 at uhidev3 reportid 15: input=0, output=0, feature=2
uhid14 at uhidev3 reportid 16: input=0, output=0, feature=1
uhid15 at uhidev3 reportid 17: input=0, output=0, feature=1
uhid16 at uhidev3 reportid 21: input=0, output=0, feature=2
uhid17 at uhidev3 reportid 22: input=0, output=0, feature=2
uhid18 at uhidev3 reportid 24: input=0, output=0, feature=2
uhid19 at uhidev3 reportid 25: input=0, output=0, feature=2
uhid20 at uhidev3 reportid 27: input=0, output=0, feature=2
uhid21 at uhidev3 reportid 28: input=0, output=0, feature=2
uhid22 at uhidev3 reportid 30: input=0, output=0, feature=1
uhid23 at uhidev3 reportid 32: input=0, output=0, feature=2
uhid24 at uhidev3 reportid 33: input=0, output=0, feature=1
uhid25 at uhidev3 reportid 34: input=0, output=0, feature=2
uhid26 at uhidev3 reportid 35: input=0, output=0, feature=1
uhid27 at uhidev3 reportid 40: input=0, output=0, feature=1
uhid28 at uhidev3 reportid 41: input=0, output=0, feature=1
uhid29 at uhidev3 reportid 42: input=0, output=0, feature=1
uhid30 at uhidev3 reportid 43: input=0, output=0, feature=1
uhid31 at uhidev3 reportid 44: input=0, output=0, feature=1
uhid32 at uhidev3 reportid 45: input=1, output=0, feature=1
uhid33 at uhidev3 reportid 46: input=1, output=0, feature=1
uhid34 at uhidev3 reportid 48: input=0, output=0, feature=2
uhid35 at uhidev3 reportid 49: input=0, output=0, feature=2
uhid36 at uhidev3 reportid 50: input=0, output=0, feature=1
uhid37 at uhidev3 reportid 51: input=0, output=0, feature=1
uhid38 at uhidev3 reportid 52: input=1, output=0, feature=1
uhid39 at uhidev3 reportid 53: input=2, output=0, feature=2
uhid40 at uhidev3 reportid 54: input=0, output=0, feature=1
uhid41 at uhidev3 reportid 55: input=0, output=0, feature=1
uhid42 at uhidev3 reportid 56: input=0, output=0, feature=1
uhid43 at uhidev3 reportid 57: input=0, output=0, feature=1
uhid44 at uhidev3 reportid 58: input=0, output=0, feature=1
uhid45 at uhidev3 reportid 59: input=0, output=0, feature=1
uhid46 at uhidev3 reportid 60: input=1, output=0, feature=1
uhid47 at uhidev3 reportid 61: input=1, output=0, feature=1
uhid48 at uhidev3 reportid 62: input=1, output=0, feature=1
So, no idea which is the most appropriate, but I picked /dev/uhid1,
first, and then tried /dev/uhid3, so that I could use a "feature=2"
device. Neither work:
ajacocks at daphne$ sudo /usr/local/ups/bin/upsdrvctl -u nut start
Network UPS Tools - UPS driver controller 2.4.1
Network UPS Tools - Generic HID driver 0.34 (2.4.1)
USB communication driver 0.31
No matching HID UPS found
Driver failed to start (exit status=1)
[/usr/local/ups/etc]
ajacocks at daphne$ cat ups.conf
[BelkinUSB]
driver = usbhid-ups
port = /dev/uhid1
Any suggestions would be welcome.
Thanks!
