Hi! I have iMac24" computer powered by Back-UPS CS650IE. (USB) I Installing NUT using Fink packages from source. Configuring NUT : 1. /sw/etc/nut/ups.conf [CS_650] driver = newhidups port = /dev/ttyS1 2. /sw/etc/nut/upsd.conf ACL all 0.0.0.0/0 ACL localhost 127.0.0.1/32 ACCEPT localhost REJECT all 3. /sw/etc/nut/upsd.users [nobody] password allowfrom = localhost upsmon master 4. /sw/etc/nut/upsmon.conf MONITOR CS_650 at localhost 1 nobody <password> master Logs from terminal: Mon Aug 18 14:28:28 on ttys000 iMac:~ mihailartuhov$ sudo /sw/lib/nut/upsdrvctl start Password: Network UPS Tools - UPS driver controller 2.0.5 Network UPS Tools: 0.28 USB communication driver 0.28 - core 0.30 (2.0.5) Detected a UPS: American Power Conversion/Back-UPS CS 650 FW:817.v4.I USB FW:v4 Using subdriver: APC/CyberPower HID 0.9 iMac:~ mihailartuhov$ sudo upsd Network UPS Tools upsd 2.0.5 /sw/var/run/ups is world readable /sw/etc/nut/upsd.conf is world readable Connected to UPS [CS_650]: CS_650 /sw/etc/nut/upsd.users is world readable iMac:~ mihailartuhov$ sudo upsmon Network UPS Tools upsmon 2.0.5 UPS: CS_650 at localhost (master) (power value 1) Using power down flag file /etc/killpower upsc CS_650 at localhost battery.charge: 100 battery.charge.low: 10 battery.charge.warning: 50 battery.date: 2007/02/13 battery.mfr.date: 2007/02/13 battery.runtime: 1215 battery.runtime.low: 120 battery.temperature: 28 battery.type: PbAc battery.voltage: 13.5 battery.voltage.nominal: 12.0 driver.name: newhidups driver.parameter.port: /dev/ttyS1 driver.version: 2.0.5 driver.version.data: APC/CyberPower HID 0.9 driver.version.internal: 0.30 input.voltage: 204.0 input.voltage.nominal: 230 output.voltage: 230.0 output.voltage.nominal: 230.0 ups.beeper.status: enabled ups.delay.shutdown: -1 ups.firmware: 817.v4.I ups.firmware.aux: v4 ups.load: 25.0 ups.mfr: American Power Conversion ups.mfr.date: 2007/02/13 ups.model: Back-UPS CS 650 ups.power.nominal: 566 ups.serial: QB0707231626 ups.status: OL ups.test.result: No test initiated iMac:~ mihailartuhov$ iMac:~ mihailartuhov$ upsc CS_650 at localhost battery.charge: 100 battery.charge.low: 10 battery.charge.warning: 50 battery.date: 2007/02/13 battery.mfr.date: 2007/02/13 battery.runtime: 1215 battery.runtime.low: 120 battery.temperature: 28 battery.type: PbAc battery.voltage: 13.5 battery.voltage.nominal: 12.0 driver.name: newhidups driver.parameter.port: /dev/ttyS1 driver.version: 2.0.5 driver.version.data: APC/CyberPower HID 0.9 driver.version.internal: 0.30 input.voltage: 204.0 input.voltage.nominal: 230 output.voltage: 230.0 output.voltage.nominal: 230.0 ups.beeper.status: enabled ups.delay.shutdown: -1 ups.firmware: 817.v4.I ups.firmware.aux: v4 ups.load: 25.0 ups.mfr: American Power Conversion ups.mfr.date: 2007/02/13 ups.model: Back-UPS CS 650 ups.power.nominal: 566 ups.serial: QB0707231626 ups.status: OL ups.test.result: No test initiated iMac:~ mihailartuhov$ My questions: 1. input.voltage: 204.0 This value is constant and does not change at each session (only change after restart computer). Why? 2. ?very minute I see the messages appear (terminal) : Broadcast Message from mihailartuhov at iMac.local (no tty) at 17:11 JST... Communications with UPS CS_650 at localhost lost Broadcast Message from mihailartuhov at iMac.local (no tty) at 17:11 JST... Communications with UPS CS_650 at localhost established Broadcast Message from mihailartuhov at iMac.local (no tty) at 17:12 JST... Communications with UPS CS_650 at localhost lost Broadcast Message from mihailartuhov at iMac.local (no tty) at 17:12 JST... Communications with UPS CS_650 at localhost established ..... Thanks for advance! Mihail A& -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.alioth.debian.org/pipermail/nut-upsuser/attachments/20080818/2c2f6a08/attachment.htm
> I have iMac24" computer powered by Back-UPS CS650IE. (USB) > I Installing NUT using Fink packages from source. > > Configuring NUT : > > 1. /sw/etc/nut/ups.conf > > [CS_650] > driver = newhidups > port = /dev/ttyS1The above (although not incorrect) is confusing. Change to 'port = auto' in order to prevent confusion (it won't be used). [...] Regarding your questions, upgrade to the latest (stable) version (nut-2.2.2)first. The version you're using now is too old and is no longer supported. At least one of your questions was addressed in later versions and possibly the other as well. Best regards, Arjen -- Eindhoven - The Netherlands Key fingerprint - 66 4E 03 2C 9D B5 CB 9B 7A FE 7E C1 EE 88 BC 57
On Mon, Aug 18, 2008 at 4:16 AM, ?????? ? <pano.irk at gmail.com> wrote:> Hi! > I have iMac24" computer powered by Back-UPS CS650IE. (USB) > I Installing NUT using Fink packages from source.In order to get the latest version of NUT, enable the "unstable" distribution in Fink: http://www.finkproject.org/faq/usage-fink.php?phpLang=en#unstable -- - Charles Lepple
I enalbled "unstable" (run fink configure and turn on the unstable trees, and run fink selfupdate; fink index; fink scanpackages afterward ) but fink list show only: nut 2.0.5-1 Network UPS Tools - core nut-cgi 2.0.5-1 Network UPS Tools - CGI graphing tools nut-usb 2.0.5-1 Network UPS Tools - USB drivers How do I install nut-2.2.2 (Fink) ? PS I tried earlier to compile and install from the source code (nut-2.2.2.tar.gz) , but it did not work. _ Mihail A On 18 Aug 2008, at 20:56, Charles Lepple wrote:> On Mon, Aug 18, 2008 at 4:16 AM, ?????? ? <pano.irk at gmail.com> wrote: >> Hi! >> I have iMac24" computer powered by Back-UPS CS650IE. (USB) >> I Installing NUT using Fink packages from source. > > In order to get the latest version of NUT, enable the "unstable" > distribution in Fink: > > http://www.finkproject.org/faq/usage-fink.php?phpLang=en#unstable > > -- > - Charles Lepple-------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.alioth.debian.org/pipermail/nut-upsuser/attachments/20080818/f9e47923/attachment.htm