Nut upsuser - Mar 2007 - 2 HID UPS'en, but only one at a time

Hello,

I installed NUT and configured it for 2 MGE UPS's connected via USB.
Debian etch NUT package:

# dpkg -l nut*|grep ^ii
ii  nut      2.0.4-3    The core system of the nut - Network UPS Tools
ii  nut-usb  2.0.4-4    USB Drivers subsystem for the nut - Network UP

Separately, with only one UPS defined in ups.conf, each one works fine
(I specified specific serial numbers for either, with port auto).

nut.conf:
[sr1ups1]
        driver = newhidups
        port = auto
        serial = "^1A1F29014.*"
        desc = "Serverrack 1 UPS 1"

[sr2ups1]
        driver = newhidups
        port = auto
        serial = "AQ2G4304F"
        desc = "Serverrack 2 UPS 1"

(For some reason the serial number of the first one would not work
without a .* at the end... although "1A1F29014" is exactly the content
of ups.serial output of upsc).

If I start NUT I get this in logs:

Mar 19 16:14:44 sphere newhidups[4898]: Startup successful
Mar 19 16:15:03 sphere newhidups[5232]: Startup successful
Mar 19 16:15:03 sphere upsd[5233]: Connected to UPS [sr1ups1]:
newhidups-auto
Mar 19 16:15:03 sphere upsd[5233]: Connected to UPS [sr2ups1]:
newhidups-auto
Mar 19 16:15:08 sphere upsd[5290]: Startup successful

So far so good, but...

upsc sr1ups1@host and upsc sr2ups1@host both return exactly the same
data (both report sr2ups1's data).

Mar 19 16:15:08 sphere upsd[5290]: Connection from 192.168.2.6
Mar 19 16:15:08 sphere upsd[5290]: Client monuser@192.168.2.6 logged
into UPS [sr1ups1]
Mar 19 16:15:08 sphere upsmon[5293]: Poll UPS
[sr1ups1@sphere.luciad.com] failed - Variable not supported by UPS
Mar 19 16:15:08 sphere upsmon[5293]: Communications with UPS
sr1ups1@sphere.luciad.com lost
ar 19 16:15:13 sphere upsmon[5293]: Poll UPS [sr1ups1@sphere.luciad.com]
failed - Variable not supported by UPS
Mar 19 16:15:13 sphere upsmon[5293]: UPS sr1ups1@sphere.luciad.com is
unavailable
Mar 19 16:15:18 sphere upsmon[5293]: Communications with UPS
sr1ups1@sphere.luciad.com established

Any pointers on what I'm doing wrong, or where the bug is?
I'd want to monitor at least 3 MGE UPS'es via USB on this box. Any
output you need can be provided on demand :)

Thanks!
-- 
Tom Laermans
System Administrator

Luciad NV - http://www.luciad.com
Gaston Geenslaan 9, 3001 Leuven, Belgium

> Hello,
>
> I installed NUT and configured it for 2 MGE UPS's connected via USB.
> Debian etch NUT package:
>
> # dpkg -l nut*|grep ^ii
> ii  nut      2.0.4-3    The core system of the nut - Network UPS Tools
> ii  nut-usb  2.0.4-4    USB Drivers subsystem for the nut - Network UP
Before anything else, upgrade to nut-2.0.5 (or the development version
from the SVN trunk). There have been several important changes to the
newhidups driver since nut-2.0.4 came out, so the problem may have been
solved already.

Best regards, Arjen
-- 
Eindhoven - The Netherlands
Key fingerprint - 66 4E 03 2C 9D B5 CB 9B  7A FE 7E C1 EE 88 BC 57