similar to: MGE 2200, Synchronizing........ giving up

I'm running nut 2.0.1 with an MGE pulsar evolution 3000 with the mge-utalk (serial) driver on NetBSD 3.1 . I had a very strange occurance in my basement datacenter this early AM. the following was logged by upslog: 20080219 023452 100.0 123.0 049.0 [OL CHRG] NA 60.00 20080219 023522 100.0 122.8 049.0 [OL CHRG] NA 60.00 20080219 023552 098.0 123.0 049.0 [OL DISCHRG] NA 60.00 20080219 023622

Hi, I was trying to hack the /etc/rc.d/init.d/halt script under RH 9.0 in a way to achieve a clean shutdown: - commanding the RAID arrays to readonly mode - turning off my hardware watchdog, ... etc. See details below. At the end of all this preparation, and very close to the last lines of the halt script, I would then issue: 1. /usr/bin/belkinunv -x wait /dev/ttyS0 2. (OR, with a smart ups:

Hi I am trying to get Battlefield 2 and Battlefield 2142 to launch under Kubuntu 10.04 & Wine 1.3.6. I'm using an Nvidia 8800 GTX 768Mb GPU with Nvidia blob driver 260.19.12. Anyway launching BF2142 (retail copy, patched to v1.5) gives me the following error (2x) in the console output streams: Code: ... err:x11settings:X11DRV_ChangeDisplaySettingsEx No matching mode found 800x600x32

Hi, Am I hitting some limit in match? Consider the following example: > tst<-seq(100,125,by=.2)%in%seq(0,800,by=.1) > sum(tst) [1] 76 > seq(100,125,by=.2) [1] 100.0 100.2 100.4 100.6 100.8 101.0 101.2 101.4 101.6 101.8 102.0 102.2 [13] 102.4 102.6 102.8 103.0 103.2 103.4 103.6 103.8 104.0 104.2 104.4 104.6 [25] 104.8 105.0 105.2 105.4 105.6 105.8 106.0 106.2 106.4 106.6 106.8

Hi, Am I hitting some limit in match? Consider the following example: > tst<-seq(100,125,by=.2)%in%seq(0,800,by=.1) > sum(tst) [1] 76 > seq(100,125,by=.2) [1] 100.0 100.2 100.4 100.6 100.8 101.0 101.2 101.4 101.6 101.8 102.0 102.2 [13] 102.4 102.6 102.8 103.0 103.2 103.4 103.6 103.8 104.0 104.2 104.4 104.6 [25] 104.8 105.0 105.2 105.4 105.6 105.8 106.0 106.2 106.4 106.6 106.8

I have a GeForce 8800GT that I am trying to lower the fan speed on. I can change the fan RPM from high to not-as-high but I want more control over it. It is too loud and it was quieter with the blob. Maybe the temps are too high to make it quieter. # echo 1 >/sys/devices/pci0000:00/0000:00:02.0/0000:01:00.0/i2c-6/6-002e/pwm1_enable # sensors fam15h_power-pci-00c4 Adapter: PCI adapter power1:

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 ______________________________________________________________________________ Caldera International, Inc. Security Advisory Subject: Linux - sendmail queue run privilege problem Advisory number: CSSA-2001-034.0 Issue date: 2001, October 05 Cross reference: ______________________________________________________________________________ 1.

Hi I have a PDC server version samba-3.2.8-0.27.fc10.i386.rpm serving mostly Win98 machines after adding the following two lines managed to get it working with authentication and logon.bat scripts. /etc/samba/smb.conf lanman auth = Yes ntlm auth = No Now I want to add some XPPro machines but they can no not see server shares any more ( used to work on Fedora 5 server ) I

Hello, I am trying to create data frame subsets based on binned temperature data. I have code working to create the bins (d.1 and d.2), but it takes two steps, I was wondering if I could merge into one step. See Below d n year mo da hr t td tw rh kPa 1 1 1945 3 1 0 1.1 0.0 0.6 92 101.7 2 2 1945 3 1 1 2.8 -1.1 1.1 76 101.8 3 3 1945 3 1 2 2.2 -1.7 0.6 75 101.9 4 4

Hi Everyone, I have a dataset like this mean sd 0% 25% 50% 75% 100% n BODY TEMPERATURE 36.41099 0.4015699 35.1 36.22222 36.5 36.66667 37.1 89 DIASTOLIC BLOOD PRESSURE 73.60079 9.4656186 50.0 67.00000 73.0 80.00000 95.0 253 HEIGHT 171.94000 9.2011670 153.5 166.50000 173.0 176.25000 190.0

Hi all, How can we use ks.test() to evaluate goodness of fit of mixtures of distributions? For example I have the following dataset: > x [1] 176.1 176.8 259.6 171.6 90.0 234.3 145.7 113.7 105.9 176.2 168.9 136.1 [13] 109.2 110.3 164.3 117.7 131.3 163.7 200.4 196.4 196.2 168.6 190.4 127.5 [25] 136.0 114.2 112.0 91.9 333.4 295.5 172.0 293.3 91.7 289.7 118.8 55.1 [37] 161.9 233.9 197.7

The minimum is set at 1200Kbits/second. However, in testing, if I set that for a VNIC, the domU gets no traffic at all (maybe the occassional packet). Is the minimum too low? If I set a maximum of 2000Kbits/second, I get this from nicstat (expecting around 250Kbytes/s total: Time Int rKB/s wKB/s rPk/s wPk/s rAvs wAvs %Util Sat 04:35:38 xvm15_0 146.6 5.32 102.0

The minimum is set at 1200Kbits/second. However, in testing, if I set that for a VNIC, the domU gets no traffic at all (maybe the occassional packet). Is the minimum too low? If I set a maximum of 2000Kbits/second, I get this from nicstat (expecting around 250Kbytes/s total: Time Int rKB/s wKB/s rPk/s wPk/s rAvs wAvs %Util Sat 04:35:38 xvm15_0 146.6 5.32 102.0

Hello, I teach statistics and use R Commander for teaching. I have 2 students out of 169 that can't get scatterplots or plot to work. I have had them update packages, restart R/R Commander/their computers and even reinstall R/R Commander. One is using Windows 7 on a new pc and the other is a pc user (not sure the OS). They are both using R2.11.1 and R Commander 1.6-0. The data look like

Hello I have a Fedora 6 with samba 3.0.2465 working great as a PDC with Win98 clients. The server has domain logon working and login scripts running I have made a second server to replace the first but after upgrading beyond Fedora 8 it no longer works. I can see shares with Vista64 Business and XP Pro although they will not authenticate but the win98 boxes I get "the domain password

Hello, I have two UPS from PowerWalker: VFI 1500RM LCD and VFI 3000RM LCD both equiped with SNMP card, but NUT with snmp-ups does not support them. PowerWalker declare support RFC1213, RFC162 but there is a problem with some snmp values: # upsdrvctl start Network UPS Tools - UPS driver controller 2.6.4 Network UPS Tools - Generic SNMP UPS driver 0.66 (2.6.4) Detected 3K on host 10.0.0.236

Dear R-helpers, I can not invoke maxent() in Mac OSX. Could you give me any directions on that? Thank you in advance. Here is my info: # (1) the error > me <- maxent(predictors, occtrain, factors='biome') me <- maxent(predictors, occtrain, factors='biome') Error in .jcall(mxe, "S", "fit", c("autorun", "-e", afn, "-o",

Hi R-users, I'm not sure what's wrong and how do I check the error? I have 3 sets of data > aug_dt1  [1]  22.8  49.6  77.9  67.6  91.2  48.9 124.6  54.6  85.8  62.8  63.3 174.7  32.3  22.7  99.9 123.2   4.8 149.0  66.0 [20]  73.9  37.4  22.4  69.5  87.3  66.9  87.2  81.5 109.1  47.4  22.8  92.4  60.9  77.5  91.3  91.9  78.2  39.4 107.5 [39]  57.9  65.5  76.0  47.2 145.5  95.9 106.0

Dear R-helpers and Dr. Hijmans, I can not invoke maxent() in GNU Linux. Could you give me any directions on that? There is maxent.jar in version 3.3.3e in the right folder. ######################################## R: > jar <- paste(system.file(package="dismo"), "/java/maxent.jar", sep='') > jar [1] "/ebio/abt6/jmao/rpacks/dismo/java/maxent.jar"

You asked about survival curves with age scale versus follow-up scale. > fit1 <- coxph(Surv(time/365.25, status) ~ t5 + id + age, data=stanford2) > surv1<- survfit(fit1) > surv1 n events median 0.95LCL 0.95UCL 157.000 102.000 1.999 0.898 3.608 > summary(surv1, times=3) time n.risk n.event survival std.err lower 95% CI upper 95% CI 3 46 85 0.451