Nut upsdev - Nov 2016 - nutdrv-qx powercool 1500VA USB UPS

Thanks for the log - apparently we always get valid (apart from
0.191312) but empty replies, not only for index 0x03, but also for the
other queried index (0x0c).
I've re-looked at the logs you posted on GitHub, but I don't see
anything exotic going on there.
Maybe we're missing some sort of handshaking or the like: can you post
the whole captures/logs, right from when you plug the cable till the
communication is established with UPSmart1.5?

Hi Charles,

I've added 3 more files to github.
https://github.com/mattwire/powercool-ups/blob/master/wireshark-UPSmart-startup.pcapng
- captures startup of UPSmart software and continues for about 5 minutes.
https://github.com/mattwire/powercool-ups/blob/master/wireshark-UPSmart-ups_off-on.pcapng
- UPSmart software is running, UPS is OFF. UPS is switched on and connects
to software.
https://github.com/mattwire/powercool-ups/blob/master/UPSmart_connected.png
- is a screenshot of the UPSmart software when connected (shows some values
from UPS).

Cheers,
Matthew

On 16 October 2016 at 22:49, hyouko at gmail.com <hyouko at gmail.com>
wrote:
> Thanks for the log - apparently we always get valid (apart from
> 0.191312) but empty replies, not only for index 0x03, but also for the
> other queried index (0x0c).
> I've re-looked at the logs you posted on GitHub, but I don't see
> anything exotic going on there.
> Maybe we're missing some sort of handshaking or the like: can you post
> the whole captures/logs, right from when you plug the cable till the
> communication is established with UPSmart1.5?
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.alioth.debian.org/pipermail/nut-upsdev/attachments/20161103/25d6b518/attachment.html>

Wow just seen this screenshot. I did not know it did that. Is this the 
port is ask for? Can I go to it's webpage and some port to see this type 
screen?

-Raymond Day


On 11/3/2016 6:39 PM, Matthew Wire wrote:
> https://github.com/mattwire/powercool-ups/blob/master/UPSmart_connected.png
> - is a screenshot of the UPSmart software when connected (shows some 
> values from UPS).

Thanks again for the logs.
Now... let's assume those interrupts are needed to get valid values...
well, we can't do exactly the same thing, but let's start from this
one:
https://github.com/zykh/nut/tree/nutdrv_qx_fabula-zero
Please, test nutdrv_qx (with subdriver 'fabula') from that branch and
post the output of it running with debug-level of 5.