3 feature requests for the Cyber Power 1350PFCLCD. Can you include: Path: UPS.Output.Boost, Type: Feature, ReportID: 0x17, Offset: 0, Size: 1, Value: 0.000000 Path: UPS.Output.Overload, Type: Feature, ReportID: 0x17, Offset: 1, Size: 1, Value: 0.000000 In the output from the driver? The first one says if the UPS is using AVR (active voltage regulation) to increase the voltage. The official driver calls it "Line Interaction". Can you multiply: Path: UPS.Output.ConfigActivePower, Type: Feature, ReportID: 0x18, Offset: 0, Size: 16, Value: 810.000000 With Path: UPS.Output.PercentLoad, Type: Feature, ReportID: 0x13, Offset: 0, Size: 8, Value: 26.000000 To show load in watts? And finally I have: Path: UPS.Output.Voltage, Type: Feature, ReportID: 0x12, Offset: 0, Size: 16, Value: 136.000000 And I don't don't why it's showing such a high voltage. One time it showed 142 volts. I guess without being able to tell you the scaling there isn't much you can do. (Although I think it's 1.15 - coincidentally the same scale as 12 volts to 13.8 volts for a lead acid battery - I wonder if there is a firmware bug that is scaling the wrong value, since my battery voltage reading is 1.15 too low.) -Ariel