Thomas Martitz
2015-Dec-25 07:18 UTC
[Nouveau] [RFC PATCH v2 0/7] stabilize kepler reclocking
Hello, following up on myself, it was suggested on IRC that I better attach a dmesg output. Here's the output of a clean boot & echo 0f > /sys/.../pstate cycle. I can't spot a message that relates to the reclock action, and there's only one weird "nouveau 0000:04:00.0: clk: base: 7 MHz, boost: 7 MHz" message. On the other hand: # cat /sys/bus/pci/devices/0000:04:00.0/pstate 07: core 324 MHz memory 648 MHz 0a: core 549 MHz memory 1620 MHz 0f: core 1032 MHz memory 5400 MHz AC DC * DC: core 1032 MHz memory 5400 MHz One additional data point: In a gnome3 session it can lock up even without starting a game, just by entering the gnome menu (I think the gnome desktop is hardware accelerated). Hope that helps. Best regards
Pierre Moreau
2015-Dec-25 17:43 UTC
[Nouveau] [RFC PATCH v2 0/7] stabilize kepler reclocking
Hello, Maybe my e-mail client is messing with me, but I couldn't find any dmesg output attached to your e-mail. Could you please try to attach it again? By the way, since you have a Kepler, you should try booting with "nouveau.War00C800_0=1". That workaround is enabled by default in 4.4-rc5 (IIRC), but that might not be the case on Karol's branch. Best regards, Pierre On 08:18 AM - Dec 25 2015, Thomas Martitz wrote:> Hello, > > following up on myself, it was suggested on IRC that I better attach a dmesg > output. Here's the output of a clean boot & echo 0f > /sys/.../pstate cycle. > > I can't spot a message that relates to the reclock action, and there's only > one weird "nouveau 0000:04:00.0: clk: base: 7 MHz, boost: 7 MHz" message. > > On the other hand: > # cat /sys/bus/pci/devices/0000:04:00.0/pstate > 07: core 324 MHz memory 648 MHz > 0a: core 549 MHz memory 1620 MHz > 0f: core 1032 MHz memory 5400 MHz AC DC * > DC: core 1032 MHz memory 5400 MHz > > One additional data point: In a gnome3 session it can lock up even without > starting a game, just by entering the gnome menu (I think the gnome desktop > is hardware accelerated). > > Hope that helps. > > Best regards > _______________________________________________ > Nouveau mailing list > Nouveau at lists.freedesktop.org > http://lists.freedesktop.org/mailman/listinfo/nouveau
Thomas Martitz
2015-Dec-25 22:37 UTC
[Nouveau] [RFC PATCH v2 0/7] stabilize kepler reclocking
Am 25.12.2015 um 18:43 schrieb Pierre Moreau:> Hello, > > Maybe my e-mail client is messing with me, but I couldn't find any dmesg output > attached to your e-mail. Could you please try to attach it again? > > By the way, since you have a Kepler, you should try booting with > "nouveau.War00C800_0=1". That workaround is enabled by default in 4.4-rc5 > (IIRC), but that might not be the case on Karol's branch. > > Best regards, > Pierre >No, I messed up. I'm sorry. Here's the dmesg log. I'll try your suggestion, however as I said in the other mail it'll take a few days due to vacations. Best regards. -------------- next part -------------- [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.3.3-2-ARCH (builduser at tobias) (gcc version 5.3.0 (GCC) ) #1 SMP PREEMPT Wed Dec 23 20:09:18 CET 2015 [ 0.000000] Command line: initrd=\intel-ucode.img initrd=\initramfs-linux.img root=/dev/sda2 rw nouveau.pstate=1 [ 0.000000] x86/fpu: xstate_offset[2]: 0240, xstate_sizes[2]: 0100 [ 0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers' [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 0x340 bytes, using 'standard' format. [ 0.000000] x86/fpu: Using 'eager' FPU context switches. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009bfff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009c000-0x000000000009cfff] reserved [ 0.000000] BIOS-e820: [mem 0x000000000009d000-0x000000000009dfff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x00000000000bffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000040005000-0x00000000bfeb7fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bfeb8000-0x00000000c00b9fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000c00ba000-0x00000000c684efff] usable [ 0.000000] BIOS-e820: [mem 0x00000000c684f000-0x00000000cae9efff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000cae9f000-0x00000000caf9efff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000caf9f000-0x00000000caffefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000cafff000-0x00000000caffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000cb000000-0x00000000cf9fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f80f8000-0x00000000f80f8fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000022e5fffff] usable [ 0.000000] BIOS-e820: [mem 0x000000022e600000-0x000000022fffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] e820: update [mem 0xc0aad018-0xc0abd057] usable ==> usable [ 0.000000] e820: update [mem 0xc0a9c018-0xc0aac657] usable ==> usable [ 0.000000] e820: update [mem 0xc0a7c018-0xc0a9bc57] usable ==> usable [ 0.000000] extended physical RAM map: [ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000009bfff] usable [ 0.000000] reserve setup_data: [mem 0x000000000009c000-0x000000000009cfff] reserved [ 0.000000] reserve setup_data: [mem 0x000000000009d000-0x000000000009dfff] usable [ 0.000000] reserve setup_data: [mem 0x000000000009e000-0x00000000000bffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x000000001fffffff] usable [ 0.000000] reserve setup_data: [mem 0x0000000020000000-0x00000000201fffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000020200000-0x0000000040003fff] usable [ 0.000000] reserve setup_data: [mem 0x0000000040004000-0x0000000040004fff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000040005000-0x00000000bfeb7fff] usable [ 0.000000] reserve setup_data: [mem 0x00000000bfeb8000-0x00000000c00b9fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000c00ba000-0x00000000c0a7c017] usable [ 0.000000] reserve setup_data: [mem 0x00000000c0a7c018-0x00000000c0a9bc57] usable [ 0.000000] reserve setup_data: [mem 0x00000000c0a9bc58-0x00000000c0a9c017] usable [ 0.000000] reserve setup_data: [mem 0x00000000c0a9c018-0x00000000c0aac657] usable [ 0.000000] reserve setup_data: [mem 0x00000000c0aac658-0x00000000c0aad017] usable [ 0.000000] reserve setup_data: [mem 0x00000000c0aad018-0x00000000c0abd057] usable [ 0.000000] reserve setup_data: [mem 0x00000000c0abd058-0x00000000c684efff] usable [ 0.000000] reserve setup_data: [mem 0x00000000c684f000-0x00000000cae9efff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000cae9f000-0x00000000caf9efff] ACPI NVS [ 0.000000] reserve setup_data: [mem 0x00000000caf9f000-0x00000000caffefff] ACPI data [ 0.000000] reserve setup_data: [mem 0x00000000cafff000-0x00000000caffffff] usable [ 0.000000] reserve setup_data: [mem 0x00000000cb000000-0x00000000cf9fffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000f80f8000-0x00000000f80f8fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000022e5fffff] usable [ 0.000000] reserve setup_data: [mem 0x000000022e600000-0x000000022fffffff] reserved [ 0.000000] efi: EFI v2.31 by Lenovo [ 0.000000] efi: ACPI=0xcaffe000 ACPI 2.0=0xcaffe014 SMBIOS=0xcae9e000 [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: LENOVO 2325CN3/2325CN3, BIOS G2ETA4WW (2.64 ) 04/09/2015 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x22e600 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-FFFFF uncachable [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0FFC00000 mask FFFC00000 write-protect [ 0.000000] 1 base 000000000 mask F80000000 write-back [ 0.000000] 2 base 080000000 mask FC0000000 write-back [ 0.000000] 3 base 0C0000000 mask FE0000000 write-back [ 0.000000] 4 base 0D0000000 mask FF0000000 uncachable [ 0.000000] 5 base 0CC000000 mask FFC000000 uncachable [ 0.000000] 6 base 0CB000000 mask FFF000000 uncachable [ 0.000000] 7 base 100000000 mask F00000000 write-back [ 0.000000] 8 base 200000000 mask FE0000000 write-back [ 0.000000] 9 base 220000000 mask FF0000000 write-back [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT [ 0.000000] e820: last_pfn = 0xcb000 max_arch_pfn = 0x400000000 [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff880000096000] 96000 size 24576 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x01b3f000, 0x01b3ffff] PGTABLE [ 0.000000] BRK [0x01b40000, 0x01b40fff] PGTABLE [ 0.000000] BRK [0x01b41000, 0x01b41fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x22e400000-0x22e5fffff] [ 0.000000] [mem 0x22e400000-0x22e5fffff] page 2M [ 0.000000] BRK [0x01b42000, 0x01b42fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x220000000-0x22e3fffff] [ 0.000000] [mem 0x220000000-0x22e3fffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x200000000-0x21fffffff] [ 0.000000] [mem 0x200000000-0x21fffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x1fffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x20200000-0x40003fff] [ 0.000000] [mem 0x20200000-0x3fffffff] page 2M [ 0.000000] [mem 0x40000000-0x40003fff] page 4k [ 0.000000] BRK [0x01b43000, 0x01b43fff] PGTABLE [ 0.000000] BRK [0x01b44000, 0x01b44fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x40005000-0xbfeb7fff] [ 0.000000] [mem 0x40005000-0x401fffff] page 4k [ 0.000000] [mem 0x40200000-0xbfdfffff] page 2M [ 0.000000] [mem 0xbfe00000-0xbfeb7fff] page 4k [ 0.000000] init_memory_mapping: [mem 0xc00ba000-0xc684efff] [ 0.000000] [mem 0xc00ba000-0xc01fffff] page 4k [ 0.000000] [mem 0xc0200000-0xc67fffff] page 2M [ 0.000000] [mem 0xc6800000-0xc684efff] page 4k [ 0.000000] init_memory_mapping: [mem 0xcafff000-0xcaffffff] [ 0.000000] [mem 0xcafff000-0xcaffffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff] [ 0.000000] [mem 0x100000000-0x1ffffffff] page 2M [ 0.000000] RAMDISK: [mem 0x7fbdf000-0x7fffffff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000CAFFE014 000024 (v02 LENOVO) [ 0.000000] ACPI: XSDT 0x00000000CAFFE170 0000C4 (v01 LENOVO TP-G2 00002640 PTL 00000002) [ 0.000000] ACPI: FACP 0x00000000CAFE6000 00010C (v05 LENOVO TP-G2 00002640 PTL 00000002) [ 0.000000] ACPI: DSDT 0x00000000CAFE8000 011383 (v01 LENOVO TP-G2 00002640 INTL 20061109) [ 0.000000] ACPI: FACS 0x00000000CAF5A000 000040 [ 0.000000] ACPI: TCPA 0x00000000CAFFD000 000032 (v02 PTL LENOVO 06040000 LNVO 00000001) [ 0.000000] ACPI: SSDT 0x00000000CAFFC000 000408 (v01 LENOVO TP-SSDT2 00000200 INTL 20061109) [ 0.000000] ACPI: SSDT 0x00000000CAFFB000 000033 (v01 LENOVO TP-SSDT1 00000100 INTL 20061109) [ 0.000000] ACPI: SSDT 0x00000000CAFFA000 0007A8 (v01 LENOVO SataAhci 00001000 INTL 20061109) [ 0.000000] ACPI: HPET 0x00000000CAFE4000 000038 (v01 LENOVO TP-G2 00002640 PTL 00000002) [ 0.000000] ACPI: APIC 0x00000000CAFE3000 000098 (v01 LENOVO TP-G2 00002640 PTL 00000002) [ 0.000000] ACPI: MCFG 0x00000000CAFE2000 00003C (v01 LENOVO TP-G2 00002640 PTL 00000002) [ 0.000000] ACPI: ECDT 0x00000000CAFE1000 000052 (v01 LENOVO TP-G2 00002640 PTL 00000002) [ 0.000000] ACPI: FPDT 0x00000000CAFE0000 000064 (v01 LENOVO TP-G2 00002640 PTL 00000002) [ 0.000000] ACPI: ASF! 0x00000000CAFE7000 0000A5 (v32 LENOVO TP-G2 00002640 PTL 00000002) [ 0.000000] ACPI: UEFI 0x00000000CAFDF000 00003E (v01 LENOVO TP-G2 00002640 PTL 00000002) [ 0.000000] ACPI: UEFI 0x00000000CAFDE000 000042 (v01 PTL COMBUF 00000001 PTL 00000001) [ 0.000000] ACPI: POAT 0x00000000CAFDD000 000055 (v03 LENOVO TP-G2 00002640 PTL 00000002) [ 0.000000] ACPI: SSDT 0x00000000CAFDC000 000C79 (v01 PmRef Cpu0Ist 00003000 INTL 20061109) [ 0.000000] ACPI: SSDT 0x00000000CAFDB000 000A83 (v01 PmRef CpuPm 00003000 INTL 20061109) [ 0.000000] ACPI: DMAR 0x00000000CAFDA000 0000B8 (v01 INTEL SNB 00000001 INTL 00000001) [ 0.000000] ACPI: UEFI 0x00000000CAFD9000 0002A6 (v01 LENOVO TP-G2 00002640 PTL 00000002) [ 0.000000] ACPI: DBG2 0x00000000CAFD8000 0000E9 (v00 LENOVO TP-G2 00002640 PTL 00000002) [ 0.000000] ACPI: BGRT 0x00000000CAFD7000 000038 (v00 LENOVO TP-G2 00002640 PTL 00000002) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000022e5fffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x22e5f2000-0x22e5f5fff] [ 0.000000] [ffffea0000000000-ffffea0008bfffff] PMD -> [ffff880225c00000-ffff88022dbfffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000022e5fffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009bfff] [ 0.000000] node 0: [mem 0x000000000009d000-0x000000000009dfff] [ 0.000000] node 0: [mem 0x0000000000100000-0x000000001fffffff] [ 0.000000] node 0: [mem 0x0000000020200000-0x0000000040003fff] [ 0.000000] node 0: [mem 0x0000000040005000-0x00000000bfeb7fff] [ 0.000000] node 0: [mem 0x00000000c00ba000-0x00000000c684efff] [ 0.000000] node 0: [mem 0x00000000cafff000-0x00000000caffffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000022e5fffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000022e5fffff] [ 0.000000] On node 0 totalpages: 2050537 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 23 pages reserved [ 0.000000] DMA zone: 3996 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 12626 pages used for memmap [ 0.000000] DMA32 zone: 808013 pages, LIFO batch:31 [ 0.000000] Normal zone: 19352 pages used for memmap [ 0.000000] Normal zone: 1238528 pages, LIFO batch:31 [ 0.000000] Reserving Intel graphics stolen memory at 0xcba00000-0xcf9fffff [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009c000-0x0009cfff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x000bffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000c0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x40004000-0x40004fff] [ 0.000000] PM: Registered nosave memory: [mem 0xbfeb8000-0xc00b9fff] [ 0.000000] PM: Registered nosave memory: [mem 0xc0a7c000-0xc0a7cfff] [ 0.000000] PM: Registered nosave memory: [mem 0xc0a9b000-0xc0a9bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xc0a9c000-0xc0a9cfff] [ 0.000000] PM: Registered nosave memory: [mem 0xc0aac000-0xc0aacfff] [ 0.000000] PM: Registered nosave memory: [mem 0xc0aad000-0xc0aadfff] [ 0.000000] PM: Registered nosave memory: [mem 0xc0abd000-0xc0abdfff] [ 0.000000] PM: Registered nosave memory: [mem 0xc684f000-0xcae9efff] [ 0.000000] PM: Registered nosave memory: [mem 0xcae9f000-0xcaf9efff] [ 0.000000] PM: Registered nosave memory: [mem 0xcaf9f000-0xcaffefff] [ 0.000000] PM: Registered nosave memory: [mem 0xcb000000-0xcf9fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xcfa00000-0xf80f7fff] [ 0.000000] PM: Registered nosave memory: [mem 0xf80f8000-0xf80f8fff] [ 0.000000] PM: Registered nosave memory: [mem 0xf80f9000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xffffffff] [ 0.000000] e820: [mem 0xcfa00000-0xf80f7fff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns [ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 32 pages/cpu @ffff88022e200000 s92824 r8192 d30056 u262144 [ 0.000000] pcpu-alloc: s92824 r8192 d30056 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 2018472 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: initrd=\intel-ucode.img initrd=\initramfs-linux.img root=/dev/sda2 rw nouveau.pstate=1 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 7913916K/8202148K available (5666K kernel code, 937K rwdata, 1796K rodata, 1188K init, 1164K bss, 288232K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8 [ 0.000000] NR_IRQS:8448 nr_irqs:488 16 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 2593.912 MHz processor [ 0.000067] Calibrating delay loop (skipped), value calculated using timer frequency.. 5189.98 BogoMIPS (lpj=8646373) [ 0.000072] pid_max: default: 32768 minimum: 301 [ 0.000081] ACPI: Core revision 20150818 [ 0.024185] ACPI: 6 ACPI AML tables successfully acquired and loaded [ 0.068468] Security Framework initialized [ 0.068474] Yama: becoming mindful. [ 0.069431] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.073501] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.075337] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.075356] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.075719] Initializing cgroup subsys io [ 0.075728] Initializing cgroup subsys memory [ 0.075739] Initializing cgroup subsys devices [ 0.075743] Initializing cgroup subsys freezer [ 0.075746] Initializing cgroup subsys net_cls [ 0.075750] Initializing cgroup subsys pids [ 0.075788] CPU: Physical Processor ID: 0 [ 0.075790] CPU: Processor Core ID: 0 [ 0.075798] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.075800] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.076544] mce: CPU supports 7 MCE banks [ 0.076564] CPU0: Thermal monitoring enabled (TM1) [ 0.076577] process: using mwait in idle threads [ 0.076582] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 [ 0.076584] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 [ 0.077347] Freeing SMP alternatives memory: 20K (ffffffff81a15000 - ffffffff81a1a000) [ 0.080041] Ignoring BGRT: invalid version 0 (expected 1) [ 0.083729] ftrace: allocating 22571 entries in 89 pages [ 0.103728] DMAR: Host address width 36 [ 0.103733] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 [ 0.103745] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a [ 0.103747] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 [ 0.103758] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a [ 0.103760] DMAR: RMRR base: 0x000000ca2ba000 end: 0x000000ca2d0fff [ 0.103763] DMAR: RMRR base: 0x000000cb800000 end: 0x000000cf9fffff [ 0.103767] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1 [ 0.103769] DMAR-IR: HPET id 0 under DRHD base 0xfed91000 [ 0.103772] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. [ 0.104277] DMAR-IR: Enabled IRQ remapping in x2apic mode [ 0.104281] x2apic enabled [ 0.104289] Switched APIC routing to cluster x2apic. [ 0.104780] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.137815] TSC deadline timer enabled [ 0.137821] smpboot: CPU0: Intel(R) Core(TM) i5-3320M CPU @ 2.60GHz (family: 0x6, model: 0x3a, stepping: 0x9) [ 0.137868] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver. [ 0.137907] ... version: 3 [ 0.137909] ... bit width: 48 [ 0.137911] ... generic registers: 4 [ 0.137912] ... value mask: 0000ffffffffffff [ 0.137914] ... max period: 0000ffffffffffff [ 0.137916] ... fixed-purpose events: 3 [ 0.137918] ... event mask: 000000070000000f [ 0.167901] x86: Booting SMP configuration: [ 0.167905] .... node #0, CPUs: #1 [ 0.182250] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.192080] #2 #3 [ 0.229929] x86: Booted up 1 node, 4 CPUs [ 0.229935] smpboot: Total of 4 processors activated (20759.93 BogoMIPS) [ 0.235919] devtmpfs: initialized [ 0.242658] PM: Registering ACPI NVS region [mem 0xcae9f000-0xcaf9efff] (1048576 bytes) [ 0.242866] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns [ 0.243027] pinctrl core: initialized pinctrl subsystem [ 0.243104] RTC time: 7:06:55, date: 12/25/15 [ 0.243311] NET: Registered protocol family 16 [ 0.256068] cpuidle: using governor ladder [ 0.266080] cpuidle: using governor menu [ 0.266230] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.266234] ACPI: bus type PCI registered [ 0.266236] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.266515] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.266520] PCI: not using MMCONFIG [ 0.266522] PCI: Using configuration type 1 for base access [ 0.266951] perf_event_intel: PMU erratum BJ122, BV98, HSD29 worked around, HT is on [ 0.280017] ACPI: Added _OSI(Module Device) [ 0.280021] ACPI: Added _OSI(Processor Device) [ 0.280023] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.280026] ACPI: Added _OSI(Processor Aggregator Device) [ 0.283065] ACPI : EC: EC description table is found, configuring boot EC [ 0.283081] ACPI : EC: EC started [ 0.291269] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.295175] ACPI: Dynamic OEM Table Load: [ 0.295197] ACPI: SSDT 0xFFFF880224783000 000A01 (v01 PmRef Cpu0Cst 00003001 INTL 20061109) [ 0.296305] ACPI: Dynamic OEM Table Load: [ 0.296321] ACPI: SSDT 0xFFFF8802240C8C00 000303 (v01 PmRef ApIst 00003000 INTL 20061109) [ 0.297277] ACPI: Dynamic OEM Table Load: [ 0.297290] ACPI: SSDT 0xFFFF88022477EC00 000119 (v01 PmRef ApCst 00003000 INTL 20061109) [ 0.299057] ACPI: Interpreter enabled [ 0.299069] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150818/hwxface-580) [ 0.299077] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150818/hwxface-580) [ 0.299101] ACPI: (supports S0 S3 S4 S5) [ 0.299104] ACPI: Using IOAPIC for interrupt routing [ 0.299146] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.299840] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources [ 0.299856] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.304171] ACPI: Power Resource [PUBS] (on) [ 0.304848] acpi PNP0C0A:01: ACPI dock station (docks/bays count: 1) [ 0.306704] acpi LNXIOBAY:00: ACPI dock station (docks/bays count: 2) [ 0.310024] acpi IBM0079:00: ACPI dock station (docks/bays count: 3) [ 0.310881] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 0.310992] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 0.311097] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 0.311201] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 0.311304] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 0.311407] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 0.311509] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 0.311612] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 0.311762] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f]) [ 0.311771] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.311967] acpi PNP0A08:00: _OSC: platform does not support [PCIeCapability] [ 0.312054] acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability] [ 0.312059] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapability] [ 0.312062] acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug PME AER] [ 0.312065] acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM [ 0.312331] PCI host bridge to bus 0000:00 [ 0.312337] pci_bus 0000:00: root bus resource [bus 00-3f] [ 0.312340] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.312344] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.312347] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.312351] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window] [ 0.312354] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window] [ 0.312357] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window] [ 0.312360] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window] [ 0.312363] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window] [ 0.312366] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] [ 0.312369] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] [ 0.312372] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] [ 0.312375] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window] [ 0.312378] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window] [ 0.312381] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window] [ 0.312384] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window] [ 0.312387] pci_bus 0000:00: root bus resource [mem 0xcfa00000-0xfebfffff window] [ 0.312390] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed4bfff window] [ 0.312413] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000 [ 0.312574] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000 [ 0.312599] pci 0000:00:02.0: reg 0x10: [mem 0xec400000-0xec7fffff 64bit] [ 0.312611] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.312619] pci 0000:00:02.0: reg 0x20: [io 0x5000-0x503f] [ 0.312805] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330 [ 0.312867] pci 0000:00:14.0: reg 0x10: [mem 0xed920000-0xed92ffff 64bit] [ 0.312976] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.313045] pci 0000:00:14.0: System wakeup disabled by ACPI [ 0.313120] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000 [ 0.313179] pci 0000:00:16.0: reg 0x10: [mem 0xed935000-0xed93500f 64bit] [ 0.313289] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.313438] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000 [ 0.313485] pci 0000:00:19.0: reg 0x10: [mem 0xed900000-0xed91ffff] [ 0.313503] pci 0000:00:19.0: reg 0x14: [mem 0xed93b000-0xed93bfff] [ 0.313520] pci 0000:00:19.0: reg 0x18: [io 0x5080-0x509f] [ 0.313615] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.313684] pci 0000:00:19.0: System wakeup disabled by ACPI [ 0.313755] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320 [ 0.313805] pci 0000:00:1a.0: reg 0x10: [mem 0xed93a000-0xed93a3ff] [ 0.313925] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.313994] pci 0000:00:1a.0: System wakeup disabled by ACPI [ 0.314068] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300 [ 0.314126] pci 0000:00:1b.0: reg 0x10: [mem 0xed930000-0xed933fff 64bit] [ 0.314245] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.314328] pci 0000:00:1b.0: System wakeup disabled by ACPI [ 0.314398] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400 [ 0.314535] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.314674] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400 [ 0.314799] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.314933] pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400 [ 0.315069] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.315141] pci 0000:00:1c.2: System wakeup disabled by ACPI [ 0.315221] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320 [ 0.315271] pci 0000:00:1d.0: reg 0x10: [mem 0xed939000-0xed9393ff] [ 0.315392] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.315469] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 0.315539] pci 0000:00:1f.0: [8086:1e55] type 00 class 0x060100 [ 0.315824] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601 [ 0.315875] pci 0000:00:1f.2: reg 0x10: [io 0x50a8-0x50af] [ 0.315891] pci 0000:00:1f.2: reg 0x14: [io 0x50b4-0x50b7] [ 0.315907] pci 0000:00:1f.2: reg 0x18: [io 0x50a0-0x50a7] [ 0.315922] pci 0000:00:1f.2: reg 0x1c: [io 0x50b0-0x50b3] [ 0.315939] pci 0000:00:1f.2: reg 0x20: [io 0x5060-0x507f] [ 0.315957] pci 0000:00:1f.2: reg 0x24: [mem 0xed938000-0xed9387ff] [ 0.316017] pci 0000:00:1f.2: PME# supported from D3hot [ 0.316145] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500 [ 0.316177] pci 0000:00:1f.3: reg 0x10: [mem 0xed934000-0xed9340ff 64bit] [ 0.316223] pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf] [ 0.316569] pci 0000:02:00.0: [1180:e823] type 00 class 0x088001 [ 0.316622] pci 0000:02:00.0: MMC controller base frequency changed to 50Mhz. [ 0.316654] pci 0000:02:00.0: reg 0x10: [mem 0xed100000-0xed1000ff] [ 0.316881] pci 0000:02:00.0: supports D1 D2 [ 0.316884] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.322616] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.322624] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff] [ 0.322631] pci 0000:00:1c.0: bridge window [mem 0xed100000-0xed8fffff] [ 0.322643] pci 0000:00:1c.0: bridge window [mem 0xec800000-0xecffffff 64bit pref] [ 0.322970] pci 0000:03:00.0: [8086:0085] type 00 class 0x028000 [ 0.323580] pci 0000:03:00.0: reg 0x10: [mem 0xed000000-0xed001fff 64bit] [ 0.324908] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold [ 0.329243] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 0.329255] pci 0000:00:1c.1: bridge window [mem 0xed000000-0xed0fffff] [ 0.329391] acpiphp: Slot [1] registered [ 0.329441] pci 0000:04:00.0: [10de:11c6] type 00 class 0x030000 [ 0.329535] pci 0000:04:00.0: reg 0x10: [mem 0xeb000000-0xebffffff] [ 0.329581] pci 0000:04:00.0: reg 0x14: [mem 0xe0000000-0xe7ffffff 64bit pref] [ 0.329626] pci 0000:04:00.0: reg 0x1c: [mem 0xe8000000-0xe9ffffff 64bit pref] [ 0.329655] pci 0000:04:00.0: reg 0x24: [io 0x3000-0x307f] [ 0.329685] pci 0000:04:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref] [ 0.329964] pci 0000:04:00.1: [10de:0e0b] type 00 class 0x040300 [ 0.330056] pci 0000:04:00.1: reg 0x10: [mem 0xec000000-0xec003fff] [ 0.335821] pci 0000:00:1c.2: PCI bridge to [bus 04-0b] [ 0.335829] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff] [ 0.335836] pci 0000:00:1c.2: bridge window [mem 0xeb000000-0xec0fffff] [ 0.335847] pci 0000:00:1c.2: bridge window [mem 0xe0000000-0xea7fffff 64bit pref] [ 0.337270] ACPI: Enabled 4 GPEs in block 00 to 3F [ 0.337396] ACPI : EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62 [ 0.337575] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=mem,locks=none [ 0.337588] vgaarb: device added: PCI:0000:04:00.0,decodes=io+mem,owns=none,locks=none [ 0.337590] vgaarb: loaded [ 0.337592] vgaarb: bridge control possible 0000:04:00.0 [ 0.337594] vgaarb: setting as boot device: PCI:0000:00:02.0 [ 0.337596] vgaarb: no bridge control possible 0000:00:02.0 [ 0.337826] PCI: Using ACPI for IRQ routing [ 0.341868] PCI: pci_cache_line_size set to 64 bytes [ 0.342388] e820: reserve RAM buffer [mem 0x0009c000-0x0009ffff] [ 0.342391] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff] [ 0.342394] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff] [ 0.342396] e820: reserve RAM buffer [mem 0xbfeb8000-0xbfffffff] [ 0.342398] e820: reserve RAM buffer [mem 0xc0a7c018-0xc3ffffff] [ 0.342402] e820: reserve RAM buffer [mem 0xc0a9c018-0xc3ffffff] [ 0.342404] e820: reserve RAM buffer [mem 0xc0aad018-0xc3ffffff] [ 0.342407] e820: reserve RAM buffer [mem 0xc684f000-0xc7ffffff] [ 0.342409] e820: reserve RAM buffer [mem 0xcb000000-0xcbffffff] [ 0.342412] e820: reserve RAM buffer [mem 0x22e600000-0x22fffffff] [ 0.342633] NetLabel: Initializing [ 0.342635] NetLabel: domain hash size = 128 [ 0.342637] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.342660] NetLabel: unlabeled traffic allowed by default [ 0.342714] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.342724] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.344769] clocksource: Switched to clocksource hpet [ 0.353875] pnp: PnP ACPI init [ 0.354467] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.354473] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved [ 0.354477] system 00:00: [mem 0x00100000-0xcf9fffff] could not be reserved [ 0.354481] system 00:00: [mem 0xfec00000-0xffffffff] could not be reserved [ 0.354488] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.354681] pnp 00:01: disabling [mem 0xfffff000-0xffffffff] because it overlaps 0000:04:00.0 BAR 6 [mem 0xfff80000-0xffffffff pref] [ 0.354693] pnp 00:01: [Firmware Bug]: PNP resource [mem 0xfed10000-0xfed13fff] covers only part of 0000:00:00.0 Intel MCH; extending to [mem 0xfed10000-0xfed17fff] [ 0.354734] system 00:01: [io 0x0400-0x047f] could not be reserved [ 0.354737] system 00:01: [io 0x0500-0x057f] has been reserved [ 0.354741] system 00:01: [io 0x0800-0x080f] has been reserved [ 0.354744] system 00:01: [io 0x15e0-0x15ef] has been reserved [ 0.354748] system 00:01: [io 0x1600-0x167f] has been reserved [ 0.354752] system 00:01: [mem 0xf8000000-0xfbffffff] could not be reserved [ 0.354756] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.354760] system 00:01: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.354763] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.354767] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.354788] system 00:01: [mem 0xfed45000-0xfed4bfff] has been reserved [ 0.354792] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved [ 0.354797] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.354892] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.354937] pnp 00:03: Plug and Play ACPI device, IDs LEN0071 PNP0303 (active) [ 0.354978] pnp 00:04: Plug and Play ACPI device, IDs LEN0020 PNP0f13 (active) [ 0.355655] pnp: PnP ACPI: found 5 devices [ 0.363635] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.363650] pci 0000:04:00.0: can't claim BAR 6 [mem 0xfff80000-0xffffffff pref]: no compatible bridge window [ 0.363702] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.363707] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff] [ 0.363718] pci 0000:00:1c.0: bridge window [mem 0xed100000-0xed8fffff] [ 0.363726] pci 0000:00:1c.0: bridge window [mem 0xec800000-0xecffffff 64bit pref] [ 0.363737] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 0.363747] pci 0000:00:1c.1: bridge window [mem 0xed000000-0xed0fffff] [ 0.363768] pci 0000:04:00.0: BAR 6: assigned [mem 0xec080000-0xec0fffff pref] [ 0.363771] pci 0000:00:1c.2: PCI bridge to [bus 04-0b] [ 0.363776] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff] [ 0.363786] pci 0000:00:1c.2: bridge window [mem 0xeb000000-0xec0fffff] [ 0.363793] pci 0000:00:1c.2: bridge window [mem 0xe0000000-0xea7fffff 64bit pref] [ 0.363806] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.363810] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.363813] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.363816] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window] [ 0.363819] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window] [ 0.363822] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window] [ 0.363826] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window] [ 0.363829] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window] [ 0.363832] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window] [ 0.363835] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window] [ 0.363838] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window] [ 0.363841] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window] [ 0.363844] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window] [ 0.363847] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window] [ 0.363851] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window] [ 0.363854] pci_bus 0000:00: resource 19 [mem 0xcfa00000-0xfebfffff window] [ 0.363857] pci_bus 0000:00: resource 20 [mem 0xfed40000-0xfed4bfff window] [ 0.363861] pci_bus 0000:02: resource 0 [io 0x4000-0x4fff] [ 0.363864] pci_bus 0000:02: resource 1 [mem 0xed100000-0xed8fffff] [ 0.363867] pci_bus 0000:02: resource 2 [mem 0xec800000-0xecffffff 64bit pref] [ 0.363870] pci_bus 0000:03: resource 1 [mem 0xed000000-0xed0fffff] [ 0.363874] pci_bus 0000:04: resource 0 [io 0x3000-0x3fff] [ 0.363877] pci_bus 0000:04: resource 1 [mem 0xeb000000-0xec0fffff] [ 0.363880] pci_bus 0000:04: resource 2 [mem 0xe0000000-0xea7fffff 64bit pref] [ 0.363935] NET: Registered protocol family 2 [ 0.364224] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 0.364504] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.364697] TCP: Hash tables configured (established 65536 bind 65536) [ 0.364745] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.364813] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.364928] NET: Registered protocol family 1 [ 0.364957] pci 0000:00:02.0: Video device with shadowed ROM [ 0.365390] PCI: CLS 64 bytes, default 64 [ 0.365479] Unpacking initramfs... [ 0.482690] Freeing initrd memory: 4228K (ffff88007fbdf000 - ffff880080000000) [ 0.482738] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.482743] software IO TLB [mem 0xb9a89000-0xbda89000] (64MB) mapped at [ffff8800b9a89000-ffff8800bda88fff] [ 0.482861] RAPL PMU detected, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer [ 0.482864] hw unit of domain pp0-core 2^-16 Joules [ 0.482866] hw unit of domain package 2^-16 Joules [ 0.482867] hw unit of domain pp1-gpu 2^-16 Joules [ 0.483074] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x1b [ 0.483087] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x1b [ 0.483103] microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x1b [ 0.483115] microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x1b [ 0.483208] microcode: Microcode Update Driver: v2.00 <tigran at aivazian.fsnet.co.uk>, Peter Oruba [ 0.483283] Scanning for low memory corruption every 60 seconds [ 0.483790] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.484414] Initialise system trusted keyring [ 0.484564] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.487261] zbud: loaded [ 0.487608] VFS: Disk quotas dquot_6.6.0 [ 0.487667] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.487934] Key type big_key registered [ 0.488322] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 0.488385] io scheduler noop registered [ 0.488391] io scheduler deadline registered [ 0.488448] io scheduler cfq registered (default) [ 0.489145] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.489160] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.489194] efifb: probing for efifb [ 0.489211] pmd_set_huge: Cannot satisfy [mem 0xd0000000-0xd0200000] with a huge-page mapping due to MTRR override. [ 0.489229] efifb: framebuffer at 0xd0000000, mapped to 0xffffc90001000000, using 4128k, total 4128k [ 0.489232] efifb: mode is 1366x768x32, linelength=5504, pages=1 [ 0.489233] efifb: scrolling: redraw [ 0.489236] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.494328] Console: switching to colour frame buffer device 170x48 [ 0.499073] fb0: EFI VGA frame buffer device [ 0.499093] intel_idle: MWAIT substates: 0x21120 [ 0.499096] intel_idle: v0.4 model 0x3A [ 0.499098] intel_idle: lapic_timer_reliable_states 0xffffffff [ 0.499407] GHES: HEST is not enabled! [ 0.499514] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.500111] Linux agpgart interface v0.103 [ 0.500778] rtc_cmos 00:02: RTC can wake from S4 [ 0.500948] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 0.500990] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 0.501007] Intel P-state driver initializing. [ 0.501161] ledtrig-cpu: registered to indicate activity on CPUs [ 0.501802] NET: Registered protocol family 10 [ 0.502115] NET: Registered protocol family 17 [ 0.502680] registered taskstats version 1 [ 0.502703] Loading compiled-in X.509 certificates [ 0.502743] zswap: loaded using pool lzo/zbud [ 0.503477] Magic number: 11:720:117 [ 0.503614] rtc_cmos 00:02: setting system clock to 2015-12-25 07:06:56 UTC (1451027216) [ 0.503778] PM: Hibernation image not present or could not be loaded. [ 0.504261] Freeing unused kernel memory: 1188K (ffffffff818ec000 - ffffffff81a15000) [ 0.504264] Write protecting the kernel read-only data: 8192k [ 0.504649] Freeing unused kernel memory: 464K (ffff88000158c000 - ffff880001600000) [ 0.504778] Freeing unused kernel memory: 252K (ffff8800017c1000 - ffff880001800000) [ 0.516472] random: systemd-tmpfile urandom read with 4 bits of entropy available [ 0.556847] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 0.558655] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.558744] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.568037] ACPI: bus type USB registered [ 0.568084] usbcore: registered new interface driver usbfs [ 0.568105] usbcore: registered new interface driver hub [ 0.568303] usbcore: registered new device driver usb [ 0.569218] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.569488] sdhci: Secure Digital Host Controller Interface driver [ 0.569493] sdhci: Copyright(c) Pierre Ossman [ 0.569567] ehci-pci: EHCI PCI platform driver [ 0.569751] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.569765] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.569786] ehci-pci 0000:00:1a.0: debug port 2 [ 0.569968] sdhci-pci 0000:02:00.0: SDHCI controller found [1180:e823] (rev 4) [ 0.570090] sdhci-pci 0000:02:00.0: No vmmc regulator found [ 0.570093] sdhci-pci 0000:02:00.0: No vqmmc regulator found [ 0.571396] mmc0: SDHCI controller on PCI [0000:02:00.0] using DMA [ 0.571920] SCSI subsystem initialized [ 0.573693] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 0.573705] ehci-pci 0000:00:1a.0: irq 16, io mem 0xed93a000 [ 0.573915] libata version 3.00 loaded. [ 0.581667] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.582135] hub 1-0:1.0: USB hub found [ 0.582149] hub 1-0:1.0: 3 ports detected [ 0.582557] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.582568] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.582587] ehci-pci 0000:00:1d.0: debug port 2 [ 0.586516] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 0.586541] ehci-pci 0000:00:1d.0: irq 23, io mem 0xed939000 [ 0.594951] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.595226] hub 2-0:1.0: USB hub found [ 0.595238] hub 2-0:1.0: 3 ports detected [ 0.595627] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.595635] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 0.596735] xhci_hcd 0000:00:14.0: hcc params 0x20007181 hci version 0x100 quirks 0x0000b930 [ 0.596747] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 0.597182] hub 3-0:1.0: USB hub found [ 0.597201] hub 3-0:1.0: 4 ports detected [ 0.597821] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.597827] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 0.598058] hub 4-0:1.0: USB hub found [ 0.598073] hub 4-0:1.0: 4 ports detected [ 0.598128] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 0.598872] ahci 0000:00:1f.2: version 3.0 [ 0.599025] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled [ 0.611717] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x17 impl SATA mode [ 0.611725] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems sxs apst [ 0.632737] scsi host0: ahci [ 0.632898] scsi host1: ahci [ 0.633028] scsi host2: ahci [ 0.633149] scsi host3: ahci [ 0.633272] scsi host4: ahci [ 0.633409] scsi host5: ahci [ 0.633468] ata1: SATA max UDMA/133 abar m2048 at 0xed938000 port 0xed938100 irq 27 [ 0.633472] ata2: SATA max UDMA/133 abar m2048 at 0xed938000 port 0xed938180 irq 27 [ 0.633475] ata3: SATA max UDMA/133 abar m2048 at 0xed938000 port 0xed938200 irq 27 [ 0.633477] ata4: DUMMY [ 0.633480] ata5: SATA max UDMA/133 abar m2048 at 0xed938000 port 0xed938300 irq 27 [ 0.633481] ata6: DUMMY [ 0.888538] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 0.901893] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 0.951939] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 0.953050] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 0.953060] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 0.953357] ata1.00: ATA-9: TS512GSSD370, N0815B, max UDMA/133 [ 0.953364] ata1.00: 1000215216 sectors, multi 2: LBA48 NCQ (depth 31/32), AA [ 0.953905] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 0.953925] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 0.954164] ata1.00: configured for UDMA/133 [ 0.954606] scsi 0:0:0:0: Direct-Access ATA TS512GSSD370 5B PQ: 0 ANSI: 5 [ 0.955190] usb 3-1: new high-speed USB device number 2 using xhci_hcd [ 1.013492] hub 1-1:1.0: USB hub found [ 1.013608] hub 1-1:1.0: 6 ports detected [ 1.026570] hub 2-1:1.0: USB hub found [ 1.026697] hub 2-1:1.0: 8 ports detected [ 1.130860] hub 3-1:1.0: USB hub found [ 1.131199] hub 3-1:1.0: 4 ports detected [ 1.272145] ata2: SATA link down (SStatus 0 SControl 300) [ 1.282114] usb 1-1.3: new full-speed USB device number 3 using ehci-pci [ 1.398876] usb 3-1.1: new full-speed USB device number 3 using xhci_hcd [ 1.435585] usb 1-1.6: new high-speed USB device number 4 using ehci-pci [ 1.482692] tsc: Refined TSC clocksource calibration: 2594.111 MHz [ 1.482699] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2564811980e, max_idle_ns: 440795290434 ns [ 1.484140] hidraw: raw HID events driver (C) Jiri Kosina [ 1.486325] usbcore: registered new interface driver usbhid [ 1.486329] usbhid: USB HID core driver [ 1.548999] usb 3-1.2: new full-speed USB device number 4 using xhci_hcd [ 1.592360] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.592839] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 1.592848] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 1.592852] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 1.593316] ata3.00: ATA-9: M4-CT256M4SSD3, 04MH, max UDMA/100 [ 1.593324] ata3.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.593873] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 1.593882] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 1.593886] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 1.594355] ata3.00: configured for UDMA/100 [ 1.594837] scsi 2:0:0:0: Direct-Access ATA M4-CT256M4SSD3 04MH PQ: 0 ANSI: 5 [ 1.705769] usb 3-1.3: new low-speed USB device number 5 using xhci_hcd [ 1.793724] usb 3-1.3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 1.793737] usb 3-1.3: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes [ 1.869210] usb 3-1.4: new full-speed USB device number 6 using xhci_hcd [ 1.912531] ata5: SATA link down (SStatus 0 SControl 300) [ 1.918792] sd 0:0:0:0: [sda] 1000215216 512-byte logical blocks: (512 GB/476 GiB) [ 1.918824] sd 2:0:0:0: [sdb] 500118192 512-byte logical blocks: (256 GB/238 GiB) [ 1.918970] sd 0:0:0:0: [sda] Write Protect is off [ 1.918977] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.918993] sd 2:0:0:0: [sdb] Write Protect is off [ 1.918999] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.919026] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.919046] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.921266] sdb: sdb1 sdb2 sdb3 sdb4 sdb5 [ 1.921291] sda: sda1 sda2 sda3 sda4 [ 1.922334] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.922356] sd 2:0:0:0: [sdb] Attached SCSI disk [ 1.951886] usb 3-1.4: ep 0x83 - rounding interval to 64 microframes, ep desc says 80 microframes [ 2.002531] raid6: sse2x1 gen() 4901 MB/s [ 2.059229] raid6: sse2x1 xor() 5235 MB/s [ 2.115952] raid6: sse2x2 gen() 10180 MB/s [ 2.172638] raid6: sse2x2 xor() 3397 MB/s [ 2.229341] raid6: sse2x4 gen() 7893 MB/s [ 2.286044] raid6: sse2x4 xor() 7536 MB/s [ 2.286045] raid6: using algorithm sse2x2 gen() 10180 MB/s [ 2.286046] raid6: .... xor() 3397 MB/s, rmw enabled [ 2.286047] raid6: using ssse3x2 recovery algorithm [ 2.286360] xor: automatically using best checksumming function: [ 2.319395] avx : 23241.600 MB/sec [ 2.322253] Btrfs loaded [ 2.323454] BTRFS: device label HOME devid 1 transid 17304 /dev/sda3 [ 2.323618] BTRFS: device label ROOT devid 1 transid 64675 /dev/sda2 [ 2.337307] BTRFS info (device sda2): disk space caching is enabled [ 2.345969] BTRFS: detected SSD devices, enabling SSD mode [ 2.443118] ip_tables: (C) 2000-2006 Netfilter Core Team [ 2.471330] systemd[1]: systemd 228 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN) [ 2.471465] systemd[1]: Detected architecture x86-64. [ 2.472401] systemd[1]: Set hostname to <thomas-nb>. [ 2.482937] clocksource: Switched to clocksource tsc [ 2.500496] systemd[1]: [/etc/systemd/system/enable-dualgpu.service:5] Failed to parse service type, ignoring: Oneshot [ 2.503069] systemd[1]: [/etc/systemd/system/rc-local.service:10] Support for option SysVStartPriority= has been removed and it is ignored [ 2.508541] systemd[1]: Listening on Journal Socket. [ 2.508769] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 2.508862] systemd[1]: Listening on Journal Socket (/dev/log). [ 2.508937] systemd[1]: Listening on udev Control Socket. [ 2.509267] systemd[1]: Created slice System Slice. [ 2.509717] systemd[1]: Starting Journal Service... [ 2.510162] systemd[1]: Starting Setup Virtual Console... [ 2.510943] systemd[1]: Mounting Temporary Directory... [ 2.511125] systemd[1]: Created slice User and Session Slice. [ 2.511218] systemd[1]: Reached target Slices. [ 2.511283] systemd[1]: Reached target Remote File Systems. [ 2.513093] systemd[1]: Starting Load Kernel Modules... [ 2.513200] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 2.513297] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 2.513383] systemd[1]: Reached target Encrypted Volumes. [ 2.513842] systemd[1]: Mounting POSIX Message Queue File System... [ 2.513924] systemd[1]: Listening on Device-mapper event daemon FIFOs. [ 2.514502] systemd[1]: Mounting Huge Pages File System... [ 2.515207] systemd[1]: Mounting Debug File System... [ 2.515303] systemd[1]: Reached target Login Prompts. [ 2.515413] systemd[1]: Listening on udev Kernel Socket. [ 2.515900] systemd[1]: Starting Set Up Additional Binary Formats... [ 2.516478] systemd[1]: Starting Create list of required static device nodes for the current kernel... [ 2.516571] systemd[1]: Reached target Swap. [ 2.517188] systemd[1]: Starting Remount Root and Kernel File Systems... [ 2.517410] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ 2.517549] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 2.517635] systemd[1]: Reached target Paths. [ 2.518838] systemd[1]: Started Create list of required static device nodes for the current kernel. [ 2.522801] systemd[1]: systemd-modules-load.service: Main process exited, code=exited, status=1/FAILURE [ 2.523084] systemd[1]: Failed to start Load Kernel Modules. [ 2.523254] systemd[1]: systemd-modules-load.service: Unit entered failed state. [ 2.523262] systemd[1]: systemd-modules-load.service: Failed with result 'exit-code'. [ 2.523759] systemd[1]: Mounting Configuration File System... [ 2.524220] systemd[1]: Starting Apply Kernel Variables... [ 2.525862] systemd[1]: Mounted POSIX Message Queue File System. [ 2.525965] systemd[1]: Mounted Huge Pages File System. [ 2.527136] BTRFS info (device sda2): disk space caching is enabled [ 2.528131] systemd[1]: Mounted Debug File System. [ 2.528960] systemd[1]: Mounted Temporary Directory. [ 2.530430] systemd[1]: Mounted Configuration File System. [ 2.531490] systemd[1]: Started Remount Root and Kernel File Systems. [ 2.532279] systemd[1]: proc-sys-fs-binfmt_misc.automount: Got automount request for /proc/sys/fs/binfmt_misc, triggered by 177 (systemd-binfmt) [ 2.538852] systemd[1]: Started Apply Kernel Variables. [ 2.542557] systemd[1]: Mounting Arbitrary Executable File Formats File System... [ 2.545063] systemd[1]: Starting Load/Save Random Seed... [ 2.546299] systemd[1]: Starting Create Static Device Nodes in /dev... [ 2.551601] systemd-journald[170]: File /var/log/journal/0cda9b2b00684e08b2ed27c7877ddb42/system.journal corrupted or uncleanly shut down, renaming and replacing. [ 2.551640] systemd[1]: Starting udev Coldplug all Devices... [ 2.555721] systemd[1]: Mounted Arbitrary Executable File Formats File System. [ 2.556687] systemd[1]: Started Load/Save Random Seed. [ 2.559251] systemd[1]: Started Set Up Additional Binary Formats. [ 2.567695] systemd[1]: Started Create Static Device Nodes in /dev. [ 2.568778] systemd[1]: Reached target Local File Systems (Pre). [ 2.576687] systemd[1]: Starting udev Kernel Device Manager... [ 2.581358] systemd[1]: Started Setup Virtual Console. [ 2.590641] systemd[1]: Started udev Coldplug all Devices. [ 2.598013] systemd[1]: Started Journal Service. [ 2.603947] systemd-journald[170]: Received request to flush runtime journal from PID 1 [ 2.653541] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2 [ 2.653723] pps_core: LinuxPPS API ver. 1 registered [ 2.653725] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti at linux.it> [ 2.653748] ACPI: Lid Switch [LID] [ 2.653808] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3 [ 2.653812] ACPI: Sleep Button [SLPB] [ 2.653888] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4 [ 2.653891] ACPI: Power Button [PWRF] [ 2.656872] PTP clock support registered [ 2.662732] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 2.662736] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.664005] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 2.665208] [drm] Initialized drm 1.1.0 20060810 [ 2.665559] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED [ 2.665633] ACPI: AC Adapter [AC] (off-line) [ 2.672081] Non-volatile memory driver v1.3 [ 2.673323] ACPI: Battery Slot [BAT0] (battery present) [ 2.688456] thinkpad_acpi: ThinkPad ACPI Extras v0.25 [ 2.688459] thinkpad_acpi: http://ibm-acpi.sf.net/ [ 2.688460] thinkpad_acpi: ThinkPad BIOS G2ETA4WW (2.64 ), EC unknown [ 2.688461] thinkpad_acpi: Lenovo ThinkPad X230, model 2325CN3 [ 2.688826] thinkpad_acpi: Unsupported brightness interface, please contact ibm-acpi-devel at lists.sourceforge.net [ 2.689727] thinkpad_acpi: radio switch found; radios are disabled [ 2.689837] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver [ 2.689839] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default... [ 2.694299] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is blocked [ 2.701843] wmi: Mapper loaded [ 2.702880] thermal LNXTHERM:00: registered as thermal_zone0 [ 2.702884] ACPI: Thermal Zone [THM0] (36 C) [ 2.708794] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input5 [ 2.776521] BTRFS info (device sda3): use ssd allocation scheme [ 2.776522] BTRFS info (device sda3): disk space caching is enabled [ 2.776523] BTRFS: has skinny extents [ 2.817337] input: PC Speaker as /devices/platform/pcspkr/input/input6 [ 2.834575] AVX version of gcm_enc/dec engaged. [ 2.834578] AES CTR mode by8 optimization enabled [ 2.877393] e1000e 0000:00:19.0 eth0: registered PHC clock [ 2.877397] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 3c:97:0e:68:9c:44 [ 2.877398] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 2.877447] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF [ 2.877483] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 2.877532] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\_SB_.PCI0.LPC_.PMIO) (20150818/utaddress-254) [ 2.877537] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 2.877541] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB_.PCI0.LPC_.LPIO) (20150818/utaddress-254) [ 2.877545] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 2.877546] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB_.PCI0.LPC_.LPIO) (20150818/utaddress-254) [ 2.877549] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 2.877551] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB_.PCI0.LPC_.LPIO) (20150818/utaddress-254) [ 2.877554] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 2.877555] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 2.877704] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 2.877866] i915 0000:00:02.0: enabling device (0006 -> 0007) [ 2.878548] [drm] Memory usable by graphics device = 2048M [ 2.878551] checking generic (d0000000 408000) vs hw (d0000000 10000000) [ 2.878553] fb: switching to inteldrmfb from EFI VGA [ 2.878579] Console: switching to colour dummy device 80x25 [ 2.878667] [drm] Replacing VGA console driver [ 2.885309] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.885313] [drm] Driver supports precise vblank timestamp query. [ 2.885402] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=mem [ 2.912657] Intel(R) Wireless WiFi driver for Linux [ 2.912660] Copyright(c) 2003- 2015 Intel Corporation [ 2.912835] iwlwifi 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control [ 2.915977] EXT4-fs (sda4): recovery complete [ 2.917191] iwlwifi 0000:03:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm [ 2.917964] EXT4-fs (sda4): mounted filesystem with writeback data mode. Opts: errors=remount-ro,data=writeback [ 2.924043] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 2.924233] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8 [ 2.924537] [drm] Initialized i915 1.6.0 20150731 for 0000:00:02.0 on minor 0 [ 2.926326] snd_hda_intel 0000:04:00.1: Disabling MSI [ 2.926335] snd_hda_intel 0000:04:00.1: Handle VGA-switcheroo audio client [ 2.928386] intel_rapl: Found RAPL domain package [ 2.928390] intel_rapl: Found RAPL domain core [ 2.928392] intel_rapl: Found RAPL domain uncore [ 2.936362] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG disabled [ 2.936367] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS disabled [ 2.936368] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled [ 2.936371] iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Advanced-N 6205 AGN, REV=0xB0 [ 2.937302] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled [ 2.938107] nouveau 0000:04:00.0: enabling device (0006 -> 0007) [ 2.938158] BTRFS: could not find root 8 [ 2.938164] nouveau 0000:04:00.0: NVIDIA GK106 (0e6060a1) [ 2.941369] BTRFS: could not find root 8 [ 2.941405] BTRFS: could not find root 8 [ 2.944137] iwlwifi 0000:03:00.0: RF_KILL bit toggled to disable radio. [ 2.959912] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VC: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 2.959917] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 2.959919] snd_hda_codec_realtek hdaudioC0D0: hp_outs=2 (0x15/0x1b/0x0/0x0/0x0) [ 2.959921] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 2.959923] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 2.959926] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18 [ 2.959928] snd_hda_codec_realtek hdaudioC0D0: Dock Mic=0x19 [ 2.959930] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12 [ 2.983182] [drm] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5 [ 2.995536] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 2.996475] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 2.996548] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 [ 2.996616] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 2.996756] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 [ 2.996827] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14 [ 2.996897] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15 [ 2.996964] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16 [ 3.001397] fbcon: inteldrmfb (fb0) is primary device [ 3.003076] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs' [ 3.086126] iTCO_vendor_support: vendor-support=0 [ 3.087095] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 3.087149] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460) [ 3.087291] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 3.137707] nouveau 0000:04:00.0: bios: version 80.06.3c.00.5d [ 3.138028] nouveau 0000:04:00.0: clk: base: 7 MHz, boost: 7 MHz [ 3.138618] nouveau 0000:04:00.0: fb: 1024 MiB GDDR5 [ 3.337076] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1c.2/0000:04:00.1/sound/card1/input17 [ 3.337145] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1c.2/0000:04:00.1/sound/card1/input18 [ 3.337207] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1c.2/0000:04:00.1/sound/card1/input19 [ 3.481640] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 3.584159] psmouse serio1: synaptics: queried max coordinates: x [..5768], y [..5062] [ 3.614070] psmouse serio1: synaptics: queried min coordinates: x [1174..], y [790..] [ 3.672799] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd002a3/0x940300/0x123800/0x0, board id: 1611, fw id: 1099905 [ 3.672806] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0 [ 3.710984] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7 [ 3.716502] mousedev: PS/2 mouse device common for all mice [ 3.721450] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 3.727541] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3.838278] Console: switching to colour frame buffer device 170x48 [ 3.842405] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 3.842900] rc.local [ 4.227971] [TTM] Zone kernel: Available graphics memory: 3996862 kiB [ 4.227973] [TTM] Zone dma32: Available graphics memory: 2097152 kiB [ 4.227974] [TTM] Initializing pool allocator [ 4.227979] [TTM] Initializing DMA pool allocator [ 4.227990] nouveau 0000:04:00.0: DRM: VRAM: 1024 MiB [ 4.227991] nouveau 0000:04:00.0: DRM: GART: 1048576 MiB [ 4.227995] nouveau 0000:04:00.0: DRM: TMDS table version 2.0 [ 4.227996] nouveau 0000:04:00.0: DRM: DCB version 4.0 [ 4.227998] nouveau 0000:04:00.0: DRM: DCB outp 00: 02033f10 00000000 [ 4.228000] nouveau 0000:04:00.0: DRM: DCB outp 01: 01000f02 00020030 [ 4.228001] nouveau 0000:04:00.0: DRM: DCB outp 02: 08011f82 00020030 [ 4.228002] nouveau 0000:04:00.0: DRM: DCB outp 03: 02022f62 00020010 [ 4.228004] nouveau 0000:04:00.0: DRM: DCB conn 00: 00001031 [ 4.228005] nouveau 0000:04:00.0: DRM: DCB conn 01: 00002131 [ 4.228006] nouveau 0000:04:00.0: DRM: DCB conn 02: 00010261 [ 4.228007] nouveau 0000:04:00.0: DRM: DCB conn 03: 00000300 [ 4.255205] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 4.255208] [drm] Driver supports precise vblank timestamp query. [ 4.317008] media: Linux media interface: v0.10 [ 4.323560] Linux video capture interface: v2.00 [ 4.328224] input: SUNREX USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1.3/3-1.3:1.0/0003:05AF:0003.0003/input/input21 [ 4.328508] input: ROCCAT ROCCAT Kone Pure Optical as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1.1/3-1.1:1.0/0003:1E7D:2DB4.0001/input/input22 [ 4.331494] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1530, Max: 1285 [ 4.331496] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 4.331499] usb 3-1.4: Not enough bandwidth for altsetting 4 [ 4.341530] usbcore: registered new interface driver snd-usb-audio [ 4.384289] hid-generic 0003:05AF:0003.0003: input,hidraw0: USB HID v1.10 Keyboard [SUNREX USB Keyboard] on usb-0000:00:14.0-1.3/input0 [ 4.384439] input: SUNREX USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1.3/3-1.3:1.1/0003:05AF:0003.0004/input/input23 [ 4.388282] uvcvideo: Found UVC 1.00 device Integrated Camera (5986:02d2) [ 4.390439] input: Integrated Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input24 [ 4.398171] input: Xbox 360 Wireless Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1.2/3-1.2:1.0/input/input25 [ 4.437653] konepure 0003:1E7D:2DB4.0001: input,hiddev0,hidraw1: USB HID v1.00 Mouse [ROCCAT ROCCAT Kone Pure Optical] on usb-0000:00:14.0-1.1/input0 [ 4.438026] input: ROCCAT ROCCAT Kone Pure Optical as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1.1/3-1.1:1.1/0003:1E7D:2DB4.0002/input/input26 [ 4.491356] usbcore: registered new interface driver uvcvideo [ 4.491359] USB Video Class driver (1.1.1) [ 4.491766] input: Xbox 360 Wireless Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1.2/3-1.2:1.2/input/input27 [ 4.493043] input: Xbox 360 Wireless Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1.2/3-1.2:1.4/input/input28 [ 4.493088] hid-generic 0003:05AF:0003.0004: input,hidraw2: USB HID v1.10 Device [SUNREX USB Keyboard] on usb-0000:00:14.0-1.3/input1 [ 4.493607] input: Xbox 360 Wireless Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1.2/3-1.2:1.6/input/input29 [ 4.544568] usbcore: registered new interface driver xpad [ 4.545730] konepure 0003:1E7D:2DB4.0002: input,hidraw3: USB HID v1.11 Keyboard [ROCCAT ROCCAT Kone Pure Optical] on usb-0000:00:14.0-1.1/input1 [ 4.688988] nouveau 0000:04:00.0: DRM: MM: using COPY for buffer copies [ 4.935950] nouveau 0000:04:00.0: DRM: allocated 1920x1080 fb: 0x60000, bo ffff8800c433bc00 [ 4.936032] nouveau 0000:04:00.0: fb1: nouveaufb frame buffer device [ 4.936049] [drm] Initialized nouveau 1.3.1 20120801 for 0000:04:00.0 on minor 1 [ 6.119304] random: nonblocking pool is initialized [ 6.630936] fuse init (API version 7.23) [ 7.791859] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3 [ 7.991346] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input20 [ 21.280290] systemd-journald[170]: File /var/log/journal/0cda9b2b00684e08b2ed27c7877ddb42/user-1000.journal corrupted or uncleanly shut down, renaming and replacing. [ 21.693929] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.693933] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.693936] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.693939] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.693963] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.693964] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.693966] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.693967] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.693990] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.693992] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.693994] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.693995] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.694152] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.694156] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.694158] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.694160] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.694346] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.694348] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.694350] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.694351] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.694728] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.694730] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.694732] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.694734] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.694757] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.694759] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.694761] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.694762] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.694783] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.694784] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.694786] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.694787] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.694890] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.694891] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.694894] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.694895] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.695007] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.695009] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.695011] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.695012] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.695421] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.695424] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.695426] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.695428] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.695527] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.695529] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.695530] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.695536] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.695601] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.695603] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.695604] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.695606] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.695771] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.695773] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.695775] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.695776] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.695962] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.695964] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.695967] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.695969] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.696512] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.696515] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.696517] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.696518] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.696600] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.696601] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.696604] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.696605] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.696695] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.696697] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.696699] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.696701] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.696878] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.696879] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.696882] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.696884] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.697071] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.697073] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.697075] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.697077] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.697302] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.697304] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.697306] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.697308] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.697332] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.697334] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.697335] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.697337] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.697360] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.697362] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.697364] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.697365] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.697483] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.697485] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.697491] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.697492] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.697660] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.697662] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.697665] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.697667] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.697879] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.697880] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.697886] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.697888] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.697911] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.697912] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.697914] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.697916] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.697939] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.697940] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.697942] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.697944] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.698061] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.698063] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.698065] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.698071] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.698201] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.698202] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.698204] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.698206] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.698504] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.698506] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.698509] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.698511] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.698584] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.698586] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.698588] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.698589] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.698659] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.698661] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.698662] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.698664] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.698855] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.698857] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.698859] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.698861] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.699033] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.699035] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.699037] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.699039] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.699403] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.699405] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.699407] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.699409] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.699490] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.699492] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.699494] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.699495] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.699583] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.699584] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.699586] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.699587] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.699778] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.699781] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.699783] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.699785] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.699984] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.699986] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.699988] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.699990] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.700491] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.700493] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.700496] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.700497] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.700520] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.700522] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.700524] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.700525] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.700548] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.700550] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.700552] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.700553] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.700666] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.700668] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.700670] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.700672] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.700792] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.700794] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.700796] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.700798] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.701221] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.701223] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.701225] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.701227] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.701253] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.701255] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.701257] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.701259] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.701283] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.701284] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.701286] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.701288] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.701408] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.701410] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.701412] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.701416] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.701567] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.701569] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.701571] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.701573] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.702113] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.702115] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.702117] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.702119] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.702206] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.702208] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.702210] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.702212] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.702283] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.702285] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.702287] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.702289] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.702461] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.702463] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.702465] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.702466] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.702629] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.702630] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.702632] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.702634] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.703236] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.703238] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.703245] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.703246] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.703327] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.703328] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.703331] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.703332] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.703418] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.703420] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.703422] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.703424] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.703599] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.703600] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.703602] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.703604] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.703779] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.703781] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.703783] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.703785] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.712059] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.712062] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.712067] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.712069] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.712096] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.712098] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.712100] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.712101] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.712127] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.712128] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.712131] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.712133] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.712297] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.712299] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.712302] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.712304] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.712475] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.712477] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.712480] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.712481] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.712849] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.712851] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.712853] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.712855] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.712880] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.712882] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.712884] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.712886] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.712907] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.712908] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.712910] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.712911] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.713033] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.713035] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.713038] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.713039] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.713182] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.713184] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.713187] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.713188] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.713649] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.713651] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.713654] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.713655] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.713723] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.713725] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.713727] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.713728] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.713799] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.713801] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.713803] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.713805] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.713972] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.713975] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.713977] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.713978] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.714160] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.714162] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.714168] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.714170] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.714695] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.714697] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.714700] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.714702] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.714783] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.714787] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.714789] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.714791] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.714879] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.714881] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.714884] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.714885] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.715061] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.715063] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.715065] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.715067] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.715258] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.715260] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.715261] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.715263] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.715493] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.715495] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.715512] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.715516] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.715557] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.715561] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.715564] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.715566] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.715596] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.715598] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.715601] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.715603] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.715738] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.715741] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.715744] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.715746] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.715911] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.715913] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.715916] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.715918] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.716194] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.716197] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.716200] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.716202] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.716229] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.716232] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.716234] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.716236] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.716261] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.716263] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.716266] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.716268] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.716381] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.716384] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.716386] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.716388] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.716516] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.716518] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.716521] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.716523] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.716853] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.716855] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.716858] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.716860] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.716949] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.716951] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.716954] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.716956] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.717043] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.717046] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.717049] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.717051] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.717218] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.717220] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.717223] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.717225] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.717415] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.717418] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.717421] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.717423] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.717845] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.717848] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.717851] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.717853] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.717955] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.717958] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.717960] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.717963] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.718064] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.718067] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.718070] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.718072] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.718248] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.718250] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.718253] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.718255] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.718448] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.718451] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.718454] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.718456] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.718980] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.718983] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.718986] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.718988] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.719017] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.719019] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.719021] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.719023] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.719049] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.719051] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.719054] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.719056] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.719183] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.719186] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.719188] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.719190] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.719331] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.719334] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.719337] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.719339] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.719836] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.719839] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.719842] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.719844] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.719872] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.719874] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.719877] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.719879] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.719904] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.719907] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.719909] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.719912] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.720023] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.720025] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.720028] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.720030] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.720157] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.720160] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.720163] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.720165] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.720737] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.720741] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.720744] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.720746] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.720837] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.720839] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.720842] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.720845] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.720929] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.720932] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.720934] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.720937] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.721103] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.721106] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.721108] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.721111] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.721307] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.721309] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.721312] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.721314] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.722017] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.722020] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.722023] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.722025] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.722133] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.722136] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.722139] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.722141] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.722272] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.722275] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.722278] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.722280] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.722469] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.722473] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.722476] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.722478] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.722678] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.722681] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.722683] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.722685] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.730913] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.730917] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.730921] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.730923] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.730954] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.730956] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.730959] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.730961] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.730986] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.730988] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.730991] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.730993] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.731130] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.731134] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.731138] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.731140] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.731282] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.731283] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.731285] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.731286] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.731677] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.731680] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.731683] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.731685] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.731710] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.731712] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.731714] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.731716] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.731737] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.731738] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.731740] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.731741] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.731842] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.731843] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.731845] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.731846] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.731945] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.731946] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.731948] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.731949] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.732367] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.732371] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.732374] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.732376] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.732460] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.732462] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.732465] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.732467] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.732522] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.732524] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.732525] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.732526] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.732647] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.732649] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.732651] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.732652] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.732780] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.732781] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.732783] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.732784] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.733188] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.733190] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.733192] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.733193] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.733250] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.733252] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.733253] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.733254] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.733310] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.733311] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.733312] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.733313] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.733457] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.733459] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.733461] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.733463] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.733665] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.733668] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.733671] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.733673] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.733962] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.733965] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.733968] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.733970] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.733997] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.733999] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.734002] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.734004] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.734028] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.734030] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.734032] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.734035] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.734151] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.734153] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.734155] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.734158] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.734292] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.734294] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.734297] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.734299] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.734551] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.734553] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.734556] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.734558] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.734584] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.734586] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.734588] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.734590] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.734613] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.734615] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.734617] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.734619] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.734738] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.734740] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.734743] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.734744] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.734891] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.734893] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.734897] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.734898] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.735222] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.735223] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.735225] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.735227] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.735278] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.735279] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.735280] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.735282] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.735339] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.735341] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.735343] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.735345] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.735522] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.735524] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.735527] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.735530] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.735678] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.735679] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.735681] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.735683] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.736059] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.736062] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.736065] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.736066] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.736126] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.736127] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.736129] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.736130] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.736186] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.736187] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.736189] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.736190] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.736318] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.736319] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.736321] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.736322] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.736470] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.736471] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.736473] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.736474] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.736948] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.736950] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.736952] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.736953] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.736971] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.736972] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.736974] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.736975] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.736990] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.736991] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.736992] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.736993] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.737087] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.737089] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.737090] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.737091] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.737187] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.737188] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.737190] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.737191] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.737573] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.737576] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.737578] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.737580] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.737606] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.737608] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.737610] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.737612] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.737637] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.737639] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.737642] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.737644] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.737766] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.737768] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.737771] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.737773] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.737923] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.737925] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.737927] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.737929] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.738546] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.738549] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.738552] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.738554] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.738642] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.738645] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.738647] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.738648] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.738703] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.738704] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.738706] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.738708] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.738858] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.738860] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.738862] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.738863] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.738997] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.738998] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.739000] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.739001] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.739436] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.739438] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.739440] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.739442] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.739504] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.739505] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.739507] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.739508] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.739564] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.739565] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.739566] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.739568] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.739685] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.739686] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.739687] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.739689] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.739837] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.739838] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.739840] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.739841] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.747297] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.747300] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.747302] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.747304] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.747323] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.747325] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.747326] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.747328] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.747343] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.747345] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.747346] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.747347] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.747452] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.747453] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.747455] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.747456] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.747575] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.747576] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.747578] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.747579] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.747855] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.747857] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.747859] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.747860] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.747876] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.747877] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.747878] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.747880] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.747894] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.747895] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.747896] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.747898] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.747984] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.747985] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.747986] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.747988] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.748082] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.748085] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.748086] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.748088] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.748393] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.748394] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.748396] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.748397] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.748449] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.748451] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.748453] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.748455] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.748507] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.748508] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.748510] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.748511] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.748615] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.748617] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.748618] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.748620] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.748736] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.748737] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.748738] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.748740] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.749130] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.749132] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.749134] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.749135] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.749192] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.749193] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.749195] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.749196] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.749251] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.749252] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.749253] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.749254] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.749376] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.749378] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.749380] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.749381] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.749521] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.749522] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.749524] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.749525] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.749703] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.749704] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.749706] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.749707] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.749723] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.749724] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.749725] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.749727] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.749741] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.749742] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.749743] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.749744] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.749821] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.749822] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.749824] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.749825] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.749915] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.749916] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.749918] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.749919] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.750062] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.750064] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.750066] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.750067] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.750087] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.750088] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.750089] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.750090] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.750104] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.750106] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.750107] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.750109] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.750190] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.750191] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.750193] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.750194] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.750286] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.750288] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.750290] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.750291] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.750511] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.750512] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.750514] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.750516] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.750564] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.750565] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.750566] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.750568] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.750614] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.750615] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.750616] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.750618] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.750719] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.750720] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.750721] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.750723] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.750841] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.750842] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.750843] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.750845] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.751112] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.751113] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.751115] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.751116] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.751172] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.751173] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.751174] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.751175] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.751230] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.751231] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.751233] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.751234] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.751350] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.751351] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.751353] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.751354] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.751490] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.751492] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.751493] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.751495] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.751816] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.751818] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.751819] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.751821] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.751837] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.751838] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.751839] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.751841] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.751855] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.751856] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.751858] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.751859] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.751933] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.751935] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.751936] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.751937] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.752026] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.752027] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.752029] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.752030] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.752342] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.752344] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.752346] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.752347] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.752363] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.752364] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.752366] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.752367] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.752381] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.752382] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.752383] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.752385] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.752471] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.752472] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.752473] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.752475] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.752573] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.752575] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.752576] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.752578] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.752943] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.752944] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.752946] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.752948] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.752996] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.752997] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.752999] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.753000] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.753047] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.753048] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.753050] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.753051] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.753212] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.753214] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.753215] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.753217] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.753334] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.753336] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.753337] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.753338] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.753749] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.753752] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.753754] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.753755] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.753810] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.753812] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.753813] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.753814] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.753869] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.753871] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.753872] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.753873] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.753994] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.753995] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.753997] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.753998] usb 3-1.4: 2:1: usb_set_interface failed (-12) [ 21.754137] xhci_hcd 0000:00:14.0: Not enough bandwidth. Proposed: 1452, Max: 1285 [ 21.754138] xhci_hcd 0000:00:14.0: Not enough bandwidth [ 21.754140] usb 3-1.4: Not enough bandwidth for altsetting 1 [ 21.754141] usb 3-1.4: 2:1: usb_set_interface failed (-12)
Thomas Martitz
2015-Dec-30 22:53 UTC
[Nouveau] [RFC PATCH v2 0/7] stabilize kepler reclocking
Am 25.12.2015 um 18:43 schrieb Pierre Moreau:> Hello, > > Maybe my e-mail client is messing with me, but I couldn't find any dmesg output > attached to your e-mail. Could you please try to attach it again? > > By the way, since you have a Kepler, you should try booting with > "nouveau.War00C800_0=1". That workaround is enabled by default in 4.4-rc5 > (IIRC), but that might not be the case on Karol's branch. > > Best regards, > Pierre >I did not find that parameter under /sys/module/nouveau/parameters. Google led me to try nouveau.config=War00C800_0=1 instead. Anyway, I added both to the kernel cmdline. Unfortunately it made no difference. Dota 2 still freezes up the system pretty much immediately (when 0f pstate is in use). I verified the config is active through cat /sys/module/nouveau/parameters/config (returns a single lien "War00C800_0=1" as expected). Best regards