bugzilla-daemon at freedesktop.org
2013-Apr-12 16:59 UTC
[Nouveau] [Bug 63481] New: Nouveau driver - No monitor signal on chipset NV1A (family NV10) since bisected bad commit ebb945a94bba2ce8dff7b0942ff2b3f2a52a0a69 in kernel 3.7.9
https://bugs.freedesktop.org/show_bug.cgi?id=63481
Priority: medium
Bug ID: 63481
Assignee: nouveau at lists.freedesktop.org
Summary: Nouveau driver - No monitor signal on chipset NV1A
(family NV10) since bisected bad commit
ebb945a94bba2ce8dff7b0942ff2b3f2a52a0a69 in kernel
3.7.9
QA Contact: xorg-team at lists.x.org
Severity: normal
Classification: Unclassified
OS: Linux (All)
Reporter: jfgodfrey at gmail.com
Hardware: x86 (IA32)
Status: NEW
Version: unspecified
Component: Driver/nouveau
Product: xorg
I experienced this problem for the first time after upgrading my kernel to
3.7.9. With that kernel, my monitor no longer functioned, but only has a
bouncing blue box that says, "PLEASE CHECK PC DISPLAY SETTINGS"
Here is a copy of the last 'git bisect visualize'
commit ebb945a94bba2ce8dff7b0942ff2b3f2a52a0a69
Author: Ben Skeggs <bskeggs at redhat.com>
Date: Fri Jul 20 08:17:34 2012 +1000
drm/nouveau: port all engines to new engine module format
This is a HUGE commit, but it's not nearly as bad as it looks - any
problems
can be isolated to a particular chipset and engine combination. It was
simply too difficult to port each one at a time, the compat layers are
*already* ridiculous.
Most of the changes here are simply to the glue, the process for each of
the
engine modules was to start with a standard skeleton and copy+paste the old
code into the appropriate places, fixing up variable names etc as needed.
v2: Marcin Slusarz <marcin.slusarz at gmail.com>
- fix find/replace bug in license header
v3: Ben Skeggs <bskeggs at redhat.com>
- bump indirect pushbuf size to 8KiB, 4KiB barely enough for userspace and
left no space for kernel's requirements during GEM pushbuf submission.
- fix duplicate assignments noticed by clang
v4: Marcin Slusarz <marcin.slusarz at gmail.com>
- add sparse annotations to nv04_fifo_pause/nv04_fifo_start
- use ioread32_native/iowrite32_native for fifo control registers
v5: Ben Skeggs <bskeggs at redhat.com>
- rebase on v3.6-rc4, modified to keep copy engine fix intact
- nv10/fence: unmap fence bo before destroying
- fixed fermi regression when using nvidia gr fuc
- fixed typo in supported dma_mask checking
Signed-off-by: Ben Skeggs <bskeggs at redhat.com>
Here's my bisect.log
Bisecting: a merge base must be tested
[28a33cbc24e4256c143dce96c7d93bf423229f92] Linux 3.5
Bisecting: 12468 revisions left to test after this (roughly 14 steps)
[06d2fe153b9b35e57221e35831a26918f462db68] Merge tag 'driver-core-3.6'
of
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Bisecting: 6387 revisions left to test after this (roughly 13 steps)
[7f60ba388f5b9dd8b0da463b394412dace3ab814] Merge tag 'for-v3.7' of
git://git.infradead.org/users/cbou/linux-pstore
Bisecting: 3161 revisions left to test after this (roughly 12 steps)
[a20acf99f75e49271381d65db097c9763060a1e8] Merge
git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-next
Bisecting: 1579 revisions left to test after this (roughly 11 steps)
[ca41cc96b2813221b05af57d0355157924de5a07] Merge branch 'for-v3.7' of
git://git.linaro.org/people/mszyprowski/linux-dma-mapping
Bisecting: 767 revisions left to test after this (roughly 10 steps)
[d66e6737d454553e1e62109d8298ede5351178a4] Merge
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Bisecting: 450 revisions left to test after this (roughly 9 steps)
[df86b5765a48d5f557489577652bd6df145b0e1b] drm/savage: re-add busmaster enable,
regression fix
Bisecting: 218 revisions left to test after this (roughly 8 steps)
[56d92aa5cf7c96c70f81d0350c94faf46a9fb76d] Merge tag
'stable/for-linus-3.7-x86-tag' of
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen
Bisecting: 120 revisions left to test after this (roughly 7 steps)
[268d28371cd326be4dfcd7eba5917bf4b9d30c8f] Merge branch
'drm-nouveau-next' of
git://anongit.freedesktop.org/git/nouveau/linux-2.6 into drm-next
Bisecting: 48 revisions left to test after this (roughly 6 steps)
[c4837d27945b9b607b5a7274a33059e73d1a7831] drm/nouveau/core: remove some
left-over pieces from the porting process
Bisecting: 24 revisions left to test after this (roughly 5 steps)
[18c9b959fd8ea6f3602efbedad788f53e305e6f1] drm/nouveau/gpuobj: create wrapper
functions for mapping gpuobj into vm/bar
Bisecting: 12 revisions left to test after this (roughly 4 steps)
[c4afbe74cebf887d3d8e7a11aa93bebcb6a3e2e1] drm/nvc0-/gr: share headers between
fermi and kepler graphics code
Bisecting: 6 revisions left to test after this (roughly 3 steps)
[fce875d647171f9f740587a252fc026aaa421afe] drm/nouveau: move compat ioctl out
of nouveau_drv.h
Bisecting: 2 revisions left to test after this (roughly 2 steps)
[08c770969a45361277d556f9fd3e2d70da42be65] drm/nouveau: start culling unused
code
Bisecting: 0 revisions left to test after this (roughly 1 step)
[ebb945a94bba2ce8dff7b0942ff2b3f2a52a0a69] drm/nouveau: port all engines to new
engine module format
Bisecting: 0 revisions left to test after this (roughly 0 steps)
[ac1499d9573f4aadd1d2beac11fe23af8ce90c24] drm/nvc0-/gr: generate grctx
template at init time, not first context ctor
ebb945a94bba2ce8dff7b0942ff2b3f2a52a0a69 is the first bad commit
commit ebb945a94bba2ce8dff7b0942ff2b3f2a52a0a69
Author: Ben Skeggs <bskeggs at redhat.com>
Date: Fri Jul 20 08:17:34 2012 +1000
drm/nouveau: port all engines to new engine module format
This is a HUGE commit, but it's not nearly as bad as it looks - any
problems
can be isolated to a particular chipset and engine combination. It was
simply too difficult to port each one at a time, the compat layers are
*already* ridiculous.
Most of the changes here are simply to the glue, the process for each of
the
engine modules was to start with a standard skeleton and copy+paste the old
code into the appropriate places, fixing up variable names etc as needed.
v2: Marcin Slusarz <marcin.slusarz at gmail.com>
- fix find/replace bug in license header
v3: Ben Skeggs <bskeggs at redhat.com>
- bump indirect pushbuf size to 8KiB, 4KiB barely enough for userspace and
left no space for kernel's requirements during GEM pushbuf submission.
- fix duplicate assignments noticed by clang
v4: Marcin Slusarz <marcin.slusarz at gmail.com>
- add sparse annotations to nv04_fifo_pause/nv04_fifo_start
- use ioread32_native/iowrite32_native for fifo control registers
v5: Ben Skeggs <bskeggs at redhat.com>
- rebase on v3.6-rc4, modified to keep copy engine fix intact
- nv10/fence: unmap fence bo before destroying
- fixed fermi regression when using nvidia gr fuc
- fixed typo in supported dma_mask checking
Signed-off-by: Ben Skeggs <bskeggs at redhat.com>
:040000 040000 09b924b6dbe320ada5907dc62230bbbc83137c41
acd1422de149497a4f445c7e0a656e392cc703b3 M drivers
And lastly, here's the output of dmesg while running 3.9.0-rc3:
[ 0.150000] ... max period: 00007fffffffffff
[ 0.150000] ... fixed-purpose events: 0
[ 0.150000] ... event mask: 000000000000000f
[ 0.150000] Brought up 1 CPUs
[ 0.150000] smpboot: Total of 1 processors activated (3324.82 BogoMIPS)
[ 0.150000] devtmpfs: initialized
[ 0.150000] PM: Registering ACPI NVS region [mem 0x0dff0000-0x0dff2fff]
(12288 bytes)
[ 0.150000] xor: measuring software checksum speed
[ 0.240005] pIII_sse : 1613.200 MB/sec
[ 0.340003] prefetch64-sse: 1620.800 MB/sec
[ 0.340057] xor: using function: prefetch64-sse (1620.800 MB/sec)
[ 0.340206] NET: Registered protocol family 16
[ 0.341131] ACPI: bus type PCI registered
[ 0.341394] dca service started, version 1.12.1
[ 0.368946] PCI: PCI BIOS revision 2.10 entry at 0xfba20, last bus=2
[ 0.369003] PCI: Using configuration type 1 for base access
[ 0.381642] bio: create slab <bio-0> at 0
[ 0.550037] raid6: mmxx1 1335 MB/s
[ 0.720013] raid6: mmxx2 2187 MB/s
[ 0.890031] raid6: sse1x1 1284 MB/s
[ 1.060021] raid6: sse1x2 2078 MB/s
[ 1.230035] raid6: int32x1 459 MB/s
[ 1.400078] raid6: int32x2 660 MB/s
[ 1.570092] raid6: int32x4 472 MB/s
[ 1.740036] raid6: int32x8 448 MB/s
[ 1.740088] raid6: using algorithm mmxx2 (2187 MB/s)
[ 1.740142] raid6: using intx1 recovery algorithm
[ 1.740331] ACPI: Added _OSI(Module Device)
[ 1.740386] ACPI: Added _OSI(Processor Device)
[ 1.740440] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 1.740494] ACPI: Added _OSI(Processor Aggregator Device)
[ 1.741385] ACPI: EC: Look up EC in DSDT
[ 1.744418] ACPI: Interpreter enabled
[ 1.744489] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State
[\_S2_] (20130117/hwxface-568)
[ 1.744654] ACPI: (supports S0 S1 S3 S4 S5)
[ 1.744708] ACPI: Using IOAPIC for interrupt routing
[ 1.744898] PCI: Ignoring host bridge windows from ACPI; if necessary, use
"pci=use_crs" and report a bug
[ 1.754865] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 1.754945] acpi PNP0A03:00: ACPI _OSC support notification failed,
disabling PCIe ASPM
[ 1.755006] acpi PNP0A03:00: Unable to request _OSC control (_OSC support
mask: 0x08)
[ 1.755174] acpi PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
(ignored)
[ 1.755178] acpi PNP0A03:00: host bridge window [io 0x0d00-0xffff]
(ignored)
[ 1.755182] acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
(ignored)
[ 1.755185] acpi PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff]
(ignored)
[ 1.755188] acpi PNP0A03:00: host bridge window [mem 0x0e000000-0xffefffff]
(ignored)
[ 1.755192] PCI: root bus 00: using default resources
[ 1.755199] acpi PNP0A03:00: fail to add MMCONFIG information, can't
access
extended PCI configuration space under this bridge.
[ 1.755356] PCI host bridge to bus 0000:00
[ 1.755416] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 1.755473] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 1.755531] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
[ 1.755606] pci 0000:00:00.0: [10de:01a4] type 00 class 0x060000
[ 1.755620] pci 0000:00:00.0: reg 10: [mem 0xe8000000-0xebffffff pref]
[ 1.755826] pci 0000:00:00.1: [10de:01ac] type 00 class 0x050000
[ 1.756006] pci 0000:00:00.2: [10de:01ad] type 00 class 0x050000
[ 1.756181] pci 0000:00:00.3: [10de:01aa] type 00 class 0x050000
[ 1.756365] pci 0000:00:01.0: [10de:01b2] type 00 class 0x060100
[ 1.756557] pci 0000:00:01.1: [10de:01b4] type 00 class 0x0c0500
[ 1.756574] pci 0000:00:01.1: reg 10: [io 0x5000-0x500f]
[ 1.756584] pci 0000:00:01.1: reg 14: [io 0x5020-0x502f]
[ 1.756594] pci 0000:00:01.1: reg 18: [io 0x6000-0x601f]
[ 1.756647] pci 0000:00:01.1: PME# supported from D3hot D3cold
[ 1.756787] pci 0000:00:02.0: [10de:01c2] type 00 class 0x0c0310
[ 1.756805] pci 0000:00:02.0: reg 10: [mem 0xee183000-0xee183fff]
[ 1.756869] pci 0000:00:02.0: supports D1 D2
[ 1.756872] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.756912] pci 0000:00:02.0: System wakeup disabled by ACPI
[ 1.757071] pci 0000:00:03.0: [10de:01c2] type 00 class 0x0c0310
[ 1.757089] pci 0000:00:03.0: reg 10: [mem 0xee181000-0xee181fff]
[ 1.757153] pci 0000:00:03.0: supports D1 D2
[ 1.757156] pci 0000:00:03.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.757194] pci 0000:00:03.0: System wakeup disabled by ACPI
[ 1.757356] pci 0000:00:04.0: [10de:01c3] type 00 class 0x020000
[ 1.757373] pci 0000:00:04.0: reg 10: [mem 0xee182000-0xee1823ff]
[ 1.757383] pci 0000:00:04.0: reg 14: [io 0xd800-0xd807]
[ 1.757441] pci 0000:00:04.0: supports D1 D2
[ 1.757444] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.757488] pci 0000:00:04.0: System wakeup disabled by ACPI
[ 1.757649] pci 0000:00:05.0: [10de:01b0] type 00 class 0x040100
[ 1.757666] pci 0000:00:05.0: reg 10: [mem 0xee100000-0xee17ffff]
[ 1.757730] pci 0000:00:05.0: supports D1 D2
[ 1.757857] pci 0000:00:06.0: [10de:01b1] type 00 class 0x040100
[ 1.757874] pci 0000:00:06.0: reg 10: [io 0xdc00-0xdcff]
[ 1.757884] pci 0000:00:06.0: reg 14: [io 0xe000-0xe07f]
[ 1.757894] pci 0000:00:06.0: reg 18: [mem 0xee180000-0xee180fff]
[ 1.757945] pci 0000:00:06.0: supports D1 D2
[ 1.758075] pci 0000:00:08.0: [10de:01b8] type 01 class 0x060400
[ 1.758129] pci 0000:00:08.0: System wakeup disabled by ACPI
[ 1.758289] pci 0000:00:09.0: [10de:01bc] type 00 class 0x01018a
[ 1.758332] pci 0000:00:09.0: reg 20: [io 0xe800-0xe80f]
[ 1.758504] pci 0000:00:1e.0: [10de:01b7] type 01 class 0x060400
[ 1.758730] pci 0000:01:02.0: [11c1:044e] type 00 class 0x078000
[ 1.758753] pci 0000:01:02.0: reg 10: [mem 0xee000000-0xee0000ff]
[ 1.758766] pci 0000:01:02.0: reg 14: [io 0xc000-0xc007]
[ 1.758779] pci 0000:01:02.0: reg 18: [io 0xc400-0xc4ff]
[ 1.758850] pci 0000:01:02.0: supports D2
[ 1.758853] pci 0000:01:02.0: PME# supported from D2 D3hot D3cold
[ 1.758998] pci 0000:00:08.0: PCI bridge to [bus 01]
[ 1.759058] pci 0000:00:08.0: bridge window [io 0xc000-0xcfff]
[ 1.759064] pci 0000:00:08.0: bridge window [mem 0xee000000-0xee0fffff]
[ 1.759157] pci 0000:02:00.0: [10de:01a0] type 00 class 0x030000
[ 1.759175] pci 0000:02:00.0: reg 10: [mem 0xec000000-0xecffffff]
[ 1.759185] pci 0000:02:00.0: reg 14: [mem 0xe0000000-0xe7ffffff pref]
[ 1.759221] pci 0000:02:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
[ 1.759382] pci 0000:00:1e.0: PCI bridge to [bus 02]
[ 1.759442] pci 0000:00:1e.0: bridge window [mem 0xec000000-0xedffffff]
[ 1.759447] pci 0000:00:1e.0: bridge window [mem 0xe0000000-0xe7ffffff
pref]
[ 1.759460] pci_bus 0000:00: on NUMA node 0
[ 1.759462] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 1.759747] ACPI: PCI Interrupt Link [LNK1] (IRQs *16), disabled.
[ 1.760088] ACPI: PCI Interrupt Link [LNK2] (IRQs *18), disabled.
[ 1.760392] ACPI: PCI Interrupt Link [LNK3] (IRQs *18)
[ 1.760654] ACPI: PCI Interrupt Link [LNK4] (IRQs *19), disabled.
[ 1.760956] ACPI: PCI Interrupt Link [LNK5] (IRQs *16)
[ 1.761228] ACPI: PCI Interrupt Link [LUBA] (IRQs *20)
[ 1.761488] ACPI: PCI Interrupt Link [LUBB] (IRQs *21)
[ 1.761748] ACPI: PCI Interrupt Link [LMAC] (IRQs *22), disabled.
[ 1.762049] ACPI: PCI Interrupt Link [LAPU] (IRQs *20)
[ 1.762308] ACPI: PCI Interrupt Link [LACI] (IRQs *21)
[ 1.762574] ACPI: PCI Interrupt Link [LMCI] (IRQs *22), disabled.
[ 1.762874] ACPI: PCI Interrupt Link [LUSB] (IRQs 3 4 5 6 7 10 11 12 14 15)
*0
[ 1.763557] ACPI: PCI Interrupt Link [LSMB] (IRQs *22)
[ 1.764625] acpi root: \_SB_.PCI0 notify handler is installed
[ 1.764661] Found 1 acpi root devices
[ 1.765026] vgaarb: device added:
PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 1.765087] vgaarb: loaded
[ 1.765138] vgaarb: bridge control possible 0000:02:00.0
[ 1.765484] SCSI subsystem initialized
[ 1.765541] ACPI: bus type ATA registered
[ 1.765778] libata version 3.00 loaded.
[ 1.765796] ACPI: bus type USB registered
[ 1.765996] usbcore: registered new interface driver usbfs
[ 1.766113] usbcore: registered new interface driver hub
[ 1.766243] usbcore: registered new device driver usb
[ 1.766600] EDAC MC: Ver: 3.0.0
[ 1.766921] Advanced Linux Sound Architecture Driver Initialized.
[ 1.767039] PCI: Using ACPI for IRQ routing
[ 1.767100] PCI: pci_cache_line_size set to 32 bytes
[ 1.767150] e820: reserve RAM buffer [mem 0x0dff0000-0x0fffffff]
[ 1.767606] Switching to clocksource refined-jiffies
[ 1.773267] pnp: PnP ACPI init
[ 1.773355] ACPI: bus type PNP registered
[ 1.773821] system 00:00: [mem 0x000f0000-0x000f3fff] could not be reserved
[ 1.773882] system 00:00: [mem 0x000f4000-0x000f7fff] could not be reserved
[ 1.773942] system 00:00: [mem 0x000f8000-0x000fbfff] could not be reserved
[ 1.774001] system 00:00: [mem 0x000fc000-0x000fffff] could not be reserved
[ 1.774060] system 00:00: [mem 0x0dff0000-0x0dffffff] could not be reserved
[ 1.774120] system 00:00: [mem 0xffb00000-0xffffffff] has been reserved
[ 1.774178] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[ 1.774238] system 00:00: [mem 0x00100000-0x0dfeffff] could not be reserved
[ 1.778505] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 1.778565] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
[ 1.778626] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 1.778814] system 00:01: [io 0x4000-0x40fe] has been reserved
[ 1.778873] system 00:01: [io 0x40ff] has been reserved
[ 1.778931] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.779320] system 00:02: [io 0x0b78-0x0b7b] has been reserved
[ 1.779380] system 00:02: [io 0x0f78-0x0f7b] has been reserved
[ 1.779438] system 00:02: [io 0x0a78-0x0a7b] has been reserved
[ 1.779495] system 00:02: [io 0x0e78-0x0e7b] has been reserved
[ 1.779553] system 00:02: [io 0x0bbc-0x0bbf] has been reserved
[ 1.779610] system 00:02: [io 0x0fbc-0x0fbf] has been reserved
[ 1.779668] system 00:02: [io 0x04d0-0x04d1] has been reserved
[ 1.779725] system 00:02: [io 0x0294-0x0297] has been reserved
[ 1.779784] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.779807] pnp 00:03: [dma 4]
[ 1.779891] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[ 1.780043] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 1.780135] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[ 1.780237] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 1.780416] pnp 00:07: [dma 2]
[ 1.780520] pnp 00:07: Plug and Play ACPI device, IDs PNP0700 (active)
[ 1.780884] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[ 1.781450] pnp 00:09: [dma 3]
[ 1.781581] pnp 00:09: Plug and Play ACPI device, IDs PNP0401 (active)
[ 1.781730] pnp 00:0a: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 1.781856] pnp 00:0b: Plug and Play ACPI device, IDs PNP0303 (active)
[ 1.782161] pnp 00:0c: Plug and Play ACPI device, IDs PNPb02f (active)
[ 1.782503] pnp 00:0d: Plug and Play ACPI device, IDs PNPb006 (active)
[ 1.782517] pnp: PnP ACPI: found 14 devices
[ 1.782573] ACPI: bus type PNP unregistered
[ 1.823271] Switching to clocksource acpi_pm
[ 1.823404] pci 0000:00:08.0: PCI bridge to [bus 01]
[ 1.823463] pci 0000:00:08.0: bridge window [io 0xc000-0xcfff]
[ 1.823525] pci 0000:00:08.0: bridge window [mem 0xee000000-0xee0fffff]
[ 1.823599] pci 0000:02:00.0: BAR 6: assigned [mem 0xed000000-0xed00ffff
pref]
[ 1.823660] pci 0000:00:1e.0: PCI bridge to [bus 02]
[ 1.823719] pci 0000:00:1e.0: bridge window [mem 0xec000000-0xedffffff]
[ 1.823779] pci 0000:00:1e.0: bridge window [mem 0xe0000000-0xe7ffffff
pref]
[ 1.823858] pci 0000:00:08.0: setting latency timer to 64
[ 1.823868] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 1.823872] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
[ 1.823875] pci_bus 0000:01: resource 0 [io 0xc000-0xcfff]
[ 1.823879] pci_bus 0000:01: resource 1 [mem 0xee000000-0xee0fffff]
[ 1.823883] pci_bus 0000:02: resource 1 [mem 0xec000000-0xedffffff]
[ 1.823886] pci_bus 0000:02: resource 2 [mem 0xe0000000-0xe7ffffff pref]
[ 1.823968] NET: Registered protocol family 2
[ 1.824348] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
[ 1.824446] TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
[ 1.824537] TCP: Hash tables configured (established 2048 bind 2048)
[ 1.824685] TCP: reno registered
[ 1.824741] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 1.824810] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 1.824973] NET: Registered protocol family 1
[ 1.825357] ACPI: PCI Interrupt Link [LUBA] enabled at IRQ 20
[ 1.900358] ACPI: PCI Interrupt Link [LUBB] enabled at IRQ 21
[ 1.900568] pci 0000:02:00.0: Boot video device
[ 1.900573] PCI: CLS 0 bytes, default 32
[ 1.900832] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[ 1.900890] apm: overridden by ACPI.
[ 1.901567] audit: initializing netlink socket (disabled)
[ 1.901650] type=2000 audit(1365740499.899:1): initialized
[ 1.957794] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.957944] VFS: Disk quotas dquot_6.5.2
[ 1.958038] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.958401] msgmni has been set to 428
[ 1.958745] async_tx: api initialized (async)
[ 1.958896] Block layer SCSI generic (bsg) driver version 0.4 loaded (major
253)
[ 1.958957] io scheduler noop registered
[ 1.959010] io scheduler deadline registered
[ 1.959070] io scheduler cfq registered (default)
[ 1.960993] isapnp: Scanning for PnP cards...
[ 2.317843] isapnp: No Plug & Play device found
[ 2.317899] ioatdma: Intel(R) QuickData Technology Driver 4.00
[ 2.318165] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 2.338919] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.339997] Generic RTC Driver v1.07
[ 2.340209] Linux agpgart interface v0.103
[ 2.340284] agpgart: Detected NVIDIA nForce chipset
[ 2.345379] agpgart-nvidia 0000:00:00.0: AGP aperture is 64M @ 0xe8000000
[ 2.349184] brd: module loaded
[ 2.351274] loop: module loaded
[ 2.351335] Loading iSCSI transport class v2.0-870.
[ 2.351813] iscsi: registered transport (tcp)
[ 2.352167] pata_amd 0000:00:09.0: version 0.4.1
[ 2.352303] pata_amd 0000:00:09.0: setting latency timer to 64
[ 2.353067] scsi0 : pata_amd
[ 2.353733] scsi1 : pata_amd
[ 2.354219] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xe800 irq 14
[ 2.354279] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xe808 irq 15
[ 2.357417] Failed to ioremap_nocache
[ 2.357510] forcedeth: Reverse Engineered nForce ethernet driver. Version
0.64.
[ 2.357871] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 22
[ 2.357967] forcedeth 0000:00:04.0: setting latency timer to 64
[ 2.530682] ata1.00: ATA-6: Maxtor 4D060H3, DAH017K0, max UDMA/100
[ 2.530750] ata1.00: 120069936 sectors, multi 16: LBA
[ 2.530816] ata1: nv_mode_filter: 0x3f39f&0x3f39f->0x3f39f,
BIOS=0x3f000
(0xc600c0c0) ACPI=0x3f01f (20:600:0x13)
[ 2.570589] ata1.00: configured for UDMA/100
[ 2.570904] scsi 0:0:0:0: Direct-Access ATA Maxtor 4D060H3 DAH0
PQ: 0 ANSI: 5
[ 2.571489] sd 0:0:0:0: [sda] 120069936 512-byte logical blocks: (61.4
GB/57.2 GiB)
[ 2.571640] sd 0:0:0:0: [sda] Write Protect is off
[ 2.571697] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.571738] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 2.632223] sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[ 2.633357] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.880642] forcedeth 0000:00:04.0: ifname eth0, PHY OUI 0x57d @ 1, addr
00:10:dc:3a:d6:d6
[ 2.880706] forcedeth 0000:00:04.0: timirq lnktim desc-v1
[ 2.881018] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.881322] ohci_hcd 0000:00:02.0: setting latency timer to 64
[ 2.881327] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 2.881398] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus
number 1
[ 2.881519] ohci_hcd 0000:00:02.0: irq 20, io mem 0xee183000
[ 2.900023] tsc: Refined TSC clocksource calibration: 1662.375 MHz
[ 2.900086] Switching to clocksource tsc
[ 2.930374] ata2.00: ATAPI: CR-48X9TE, 5.0E, max UDMA/33
[ 2.930445] ata2.01: ATAPI: LITEON DVD-ROM LTD163, GKS3, max UDMA/33
[ 2.930511] ata2: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000
(0xc600c0c0) ACPI=0x701f (60:60:0x1f)
[ 2.930517] ata2: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000
(0xc600c0c0) ACPI=0x701f (60:60:0x1f)
[ 2.942051] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.942112] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 2.942171] usb usb1: Product: OHCI Host Controller
[ 2.942226] usb usb1: Manufacturer: Linux 3.9.0-rc3 ohci_hcd
[ 2.942282] usb usb1: SerialNumber: 0000:00:02.0
[ 2.942666] hub 1-0:1.0: USB hub found
[ 2.942729] hub 1-0:1.0: 4 ports detected
[ 2.943030] ohci_hcd 0000:00:03.0: setting latency timer to 64
[ 2.943035] ohci_hcd 0000:00:03.0: OHCI Host Controller
[ 2.943100] ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus
number 2
[ 2.943213] ohci_hcd 0000:00:03.0: irq 21, io mem 0xee181000
[ 2.970336] ata2.00: configured for UDMA/33
[ 2.990295] ata2.01: configured for UDMA/33
[ 2.995463] scsi 1:0:0:0: CD-ROM MITSUMI CR-48X9TE 5.0E
PQ: 0 ANSI: 5
[ 2.999039] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
[ 2.999100] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.999450] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 3.002089] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.002154] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 3.002213] usb usb2: Product: OHCI Host Controller
[ 3.002269] usb usb2: Manufacturer: Linux 3.9.0-rc3 ohci_hcd
[ 3.002325] usb usb2: SerialNumber: 0000:00:03.0
[ 3.002754] scsi 1:0:1:0: CD-ROM LITEON DVD-ROM LTD163 GKS3
PQ: 0 ANSI: 5
[ 3.003121] hub 2-0:1.0: USB hub found
[ 3.003189] hub 2-0:1.0: 2 ports detected
[ 3.003580] uhci_hcd: USB Universal Host Controller Interface driver
[ 3.004196] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at
0x60,0x64 irq 1,12
[ 3.004356] sr1: scsi3-mmc drive: 0x/48x cd/rw xa/form2 cdda tray
[ 3.006865] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.006927] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 3.007158] sr 1:0:1:0: Attached scsi CD-ROM sr1
[ 3.007961] mousedev: PS/2 mouse device common for all mice
[ 3.008498] md: raid0 personality registered for level 0
[ 3.008554] md: raid1 personality registered for level 1
[ 3.008609] md: raid6 personality registered for level 6
[ 3.008664] md: raid5 personality registered for level 5
[ 3.008718] md: raid4 personality registered for level 4
[ 3.008843] cpuidle: using governor ladder
[ 3.009007] hidraw: raw HID events driver (C) Jiri Kosina
[ 3.009726] ACPI: PCI Interrupt Link [LACI] enabled at IRQ 21
[ 3.009843] snd_intel8x0 0000:00:06.0: setting latency timer to 64
[ 3.037022] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input0
[ 3.690015] intel8x0_measure_ac97_clock: measured 50869 usecs (2472 samples)
[ 3.690083] intel8x0: clocking to 47412
[ 3.691438] TCP: cubic registered
[ 3.691499] NET: Registered protocol family 17
[ 3.691588] Key type dns_resolver registered
[ 3.691968] Using IPI No-Shortcut mode
[ 3.692303] registered taskstats version 1
[ 3.692767] ALSA device list:
[ 3.692820] #0: NVidia nForce with AD1885 at irq 21
[ 4.189980] input: ImPS/2 Logitech Wheel Mouse as
/devices/platform/i8042/serio1/input/input1
[ 4.199122] md: Waiting for all devices to be available before autodetect
[ 4.199180] md: If you don't use raid, use raid=noautodetect
[ 4.199591] md: Autodetecting RAID arrays.
[ 4.199645] md: Scanned 0 and added 0 devices.
[ 4.199698] md: autorun ...
[ 4.199748] md: ... autorun DONE.
[ 4.209102] EXT3-fs (sda6): error: couldn't mount because of unsupported
optional features (240)
[ 4.209559] EXT2-fs (sda6): error: couldn't mount because of unsupported
optional features (240)
[ 4.238188] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts:
(null)
[ 4.238277] VFS: Mounted root (ext4 filesystem) readonly on device 8:6.
[ 4.238386] Freeing unused kernel memory: 448k freed
[ 8.506418] systemd-udevd[851]: starting version 200
[ 9.984687] input: Power Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[ 9.985175] ACPI: Power Button [PWRB]
[ 9.985325] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 9.985391] ACPI: Power Button [PWRF]
[ 10.093119] thermal LNXTHERM:00: registered as thermal_zone0
[ 10.093125] ACPI: Thermal Zone [THRM] (65 C)
[ 10.110143] gameport gameport0: NS558 PnP Gameport is pnp00:0c/gameport0, io
0x201, speed 727kHz
[ 10.220285] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 10.279757] ACPI: Fan [FAN] (on)
[ 10.357136] Floppy drive(s): fd0 is 1.44M
[ 10.373804] FDC 0 is a post-1991 82077
[ 10.477084] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 10.598973] systemd-udevd[869]: renamed network interface eth0 to enp0s4
[ 11.229567] [drm] Initialized drm 1.1.0 20060810
[ 11.432424] wmi: Mapper loaded
[ 11.958597] ACPI: PCI Interrupt Link [LNK5] enabled at IRQ 16
[ 11.961851] nouveau [ DEVICE][0000:02:00.0] BOOT0 : 0x01a000b1
[ 11.961860] nouveau [ DEVICE][0000:02:00.0] Chipset: nForce (NV1A)
[ 11.961863] nouveau [ DEVICE][0000:02:00.0] Family : NV10
[ 11.963302] nouveau [ VBIOS][0000:02:00.0] checking PRAMIN for image...
[ 12.006595] nouveau [ VBIOS][0000:02:00.0] ... checksum invalid
[ 12.006599] nouveau [ VBIOS][0000:02:00.0] checking PROM for image...
[ 12.006616] nouveau [ VBIOS][0000:02:00.0] ... signature not found
[ 12.006619] nouveau [ VBIOS][0000:02:00.0] checking ACPI for image...
[ 12.006622] nouveau [ VBIOS][0000:02:00.0] ... signature not found
[ 12.006625] nouveau [ VBIOS][0000:02:00.0] checking PCIROM for image...
[ 12.009117] nouveau [ VBIOS][0000:02:00.0] ... appears to be valid
[ 12.009120] nouveau [ VBIOS][0000:02:00.0] using image from PCIROM
[ 12.009127] nouveau [ VBIOS][0000:02:00.0] BMP version 5.14
[ 12.010230] nouveau [ VBIOS][0000:02:00.0] version 03.1a.01.03.00
[ 12.010243] nouveau W[ VBIOS][0000:02:00.0] DCB contains no useful data
[ 12.010326] nouveau W[ VBIOS][0000:02:00.0] DCB contains no useful data
[ 12.010361] nouveau W[ VBIOS][0000:02:00.0] DCB contains no useful data
[ 12.010364] nouveau W[ VBIOS][0000:02:00.0] DCB contains no useful data
[ 12.010422] nouveau W[ PTIMER][0000:02:00.0] unknown input clock freq
[ 12.010438] nouveau [ PFB][0000:02:00.0] RAM type: stolen system memory
[ 12.010442] nouveau [ PFB][0000:02:00.0] RAM size: 32 MiB
[ 12.010444] nouveau [ PFB][0000:02:00.0] ZCOMP: 0 tags
[ 12.016149] agpgart-nvidia 0000:00:00.0: AGP 2.0 bridge
[ 12.016169] agpgart-nvidia 0000:00:00.0: putting AGP V2 device into 4x mode
[ 12.016223] nouveau 0000:02:00.0: putting AGP V2 device into 4x mode
[ 12.026481] [TTM] Zone kernel: Available graphics memory: 110016 kiB
[ 12.026486] [TTM] Initializing pool allocator
[ 12.026737] nouveau [ DRM] VRAM: 31 MiB
[ 12.026744] nouveau [ DRM] GART: 64 MiB
[ 12.026749] nouveau [ DRM] BMP version 5.20
[ 12.026754] nouveau W[ DRM] No useful DCB data in VBIOS
[ 12.029405] nouveau [ DRM] Saving VGA fonts
[ 12.084820] nouveau W[ DRM] No useful DCB data in VBIOS
[ 12.085707] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 12.085710] [drm] No driver support for vblank timestamp query.
[ 12.085834] nouveau [ DRM] 0xAFD8: Parsing digital output script table
[ 12.086071] nouveau [ DRM] 0 available performance level(s)
[ 12.086077] nouveau [ DRM] c: core 305MHz memory 0MHz
[ 12.088127] nouveau [ DRM] MM: using M2MF for buffer copies
[ 12.277591] nouveau [ DRM] allocated 1024x768 fb: 0x5000, bo cdbd8000
[ 12.278077] fbcon: nouveaufb (fb0) is primary device
[ 12.292766] Console: switching to colour frame buffer device 128x48
[ 12.293502] nouveau 0000:02:00.0: fb0: nouveaufb frame buffer device
[ 12.293505] nouveau 0000:02:00.0: registered panic notifier
[ 12.293513] [drm] Initialized nouveau 1.1.0 20120801 for 0000:02:00.0 on
minor 0
[ 15.128777] EXT4-fs (sda6): re-mounted. Opts: (null)
[ 15.444138] Adding 511996k swap on /dev/sda5. Priority:-1 extents:1
across:511996k
[ 26.616135] RPC: Registered named UNIX socket transport module.
[ 26.616141] RPC: Registered udp transport module.
[ 26.616142] RPC: Registered tcp transport module.
[ 26.616144] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 26.655187] NFS: Registering the id_resolver key type
[ 26.655218] Key type id_resolver registered
[ 26.655220] Key type id_legacy registered
[ 33.890249] tun: Universal TUN/TAP device driver, 1.6
[ 33.890254] tun: (C) 1999-2004 Max Krasnyansky <maxk at qualcomm.com>
[ 154.120983] NET: Registered protocol family 10
[ 179.573879] Installing knfsd (copyright (C) 1996 okir at monad.swb.de).
[ 179.888986] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery
directory
[ 179.903840] NFSD: starting 90-second grace period (net c070dec0)
--
You are receiving this mail because:
You are the assignee for the bug.
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.freedesktop.org/archives/nouveau/attachments/20130412/dd3232b1/attachment-0001.html>
bugzilla-daemon at freedesktop.org
2013-Apr-13 15:06 UTC
[Nouveau] [Bug 63481] Nouveau driver - No monitor signal on chipset NV1A (family NV10) since bisected bad commit ebb945a94bba2ce8dff7b0942ff2b3f2a52a0a69 in kernel 3.7.9
https://bugs.freedesktop.org/show_bug.cgi?id=63481
Tom Wijsman <TomWij at gentoo.org> changed:
What |Removed |Added
----------------------------------------------------------------------------
CC| |TomWij at gentoo.org
URL| |http://git.kernel.org/cgit/
| |linux/kernel/git/stable/lin
| |ux-stable.git/commit/?id=eb
| |b945a94bba2ce8dff7b0942ff2b
| |3f2a52a0a69
--
You are receiving this mail because:
You are the assignee for the bug.
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.freedesktop.org/archives/nouveau/attachments/20130413/eb31d4a0/attachment.html>
bugzilla-daemon at freedesktop.org
2013-Apr-15 15:40 UTC
[Nouveau] [Bug 63481] Nouveau driver - No monitor signal on chipset NV1A (family NV10) since bisected bad commit ebb945a94bba2ce8dff7b0942ff2b3f2a52a0a69 in kernel 3.7.9
https://bugs.freedesktop.org/show_bug.cgi?id=63481 --- Comment #1 from John F. Godfrey <jfgodfrey at gmail.com> --- Created attachment 78003 --> https://bugs.freedesktop.org/attachment.cgi?id=78003&action=edit Xorg.0.log, while running 3.9.0-rc6 -- You are receiving this mail because: You are the assignee for the bug. -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.freedesktop.org/archives/nouveau/attachments/20130415/097c3a9f/attachment.html>
bugzilla-daemon at freedesktop.org
2013-Aug-19 23:53 UTC
[Nouveau] [Bug 63481] [NV1A] No monitor signal since commit ebb945a94 (3.7-rc1)
https://bugs.freedesktop.org/show_bug.cgi?id=63481
Ilia Mirkin <imirkin at alum.mit.edu> changed:
What |Removed |Added
----------------------------------------------------------------------------
Summary|Nouveau driver - No |[NV1A] No monitor signal
|monitor signal on chipset |since commit ebb945a94
|NV1A (family NV10) since |(3.7-rc1)
|bisected bad commit |
|ebb945a94bba2ce8dff7b0942ff |
|2b3f2a52a0a69 in kernel |
|3.7.9 |
--- Comment #2 from Ilia Mirkin <imirkin at alum.mit.edu> ---
I've tried the direct approach here of staring at the commit. It all seems
generally plausible, but as you probably noticed, it's quite rather large.
I think that the way to go for solving this will be to run an mmiotrace of it
working and then not working, and compare. Once we know exactly which functions
aren't being called, it should be easier to figure out why. Would you be up
for
putting the two mmiotraces together? Here's a guide on how to do it:
https://wiki.ubuntu.com/X/MMIOTracing (but replace "nvidia" with
"nouveau").
You'll obviously need to compile nouveau as a module.
BTW, I assume that the monitor goes blank as soon as the modesetting happens,
not when X starts? It does seem to find your monitor, X gets EDID (which
another NV1A user isn't getting, odd). But it just never turns the crtc
on...
or something.
Also, could you provide some details about the physical hookup -- is this DVI-D
(digital) or VGA/DVI-A (analog)? Is there just a single connector or are there
multiple ones? What type(s) of connector?
Lastly, might be worthwhile to just try the latest and greatest kernel
(3.11-rc6). I have pretty low hopes for a fix to nv1a going in since 3.9, but
who knows, something could have jiggered it.
--
You are receiving this mail because:
You are the assignee for the bug.
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.freedesktop.org/archives/nouveau/attachments/20130819/3e13cee3/attachment.html>
bugzilla-daemon at freedesktop.org
2013-Aug-29 01:21 UTC
[Nouveau] [Bug 63481] [NV1A] No monitor signal since commit ebb945a94 (3.7-rc1)
https://bugs.freedesktop.org/show_bug.cgi?id=63481 --- Comment #3 from Ilia Mirkin <imirkin at alum.mit.edu> --- Please try out https://bugs.freedesktop.org/attachment.cgi?id=84758 This helped another NV1A user. -- You are receiving this mail because: You are the assignee for the bug. -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.freedesktop.org/archives/nouveau/attachments/20130829/c4339de5/attachment-0001.html>
bugzilla-daemon at freedesktop.org
2013-Sep-21 22:49 UTC
[Nouveau] [Bug 63481] [NV1A] No monitor signal since commit ebb945a94 (3.7-rc1)
https://bugs.freedesktop.org/show_bug.cgi?id=63481
Ilia Mirkin <imirkin at alum.mit.edu> changed:
What |Removed |Added
----------------------------------------------------------------------------
Status|NEW |RESOLVED
Resolution|--- |FIXED
--- Comment #4 from Ilia Mirkin <imirkin at alum.mit.edu> ---
This should be fixed in nouveau/master. If the problem remains, feel free to
reopen.
--
You are receiving this mail because:
You are the assignee for the bug.
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.freedesktop.org/archives/nouveau/attachments/20130921/91290057/attachment.html>
bugzilla-daemon at freedesktop.org
2013-Dec-11 17:55 UTC
[Nouveau] [Bug 63481] [NV1A] No monitor signal since commit ebb945a94 (3.7-rc1)
https://bugs.freedesktop.org/show_bug.cgi?id=63481
Claudio Laurita <claudio.laurita at integrazionetotale.it> changed:
What |Removed |Added
----------------------------------------------------------------------------
Status|RESOLVED |REOPENED
Resolution|FIXED |---
--- Comment #5 from Claudio Laurita <claudio.laurita at
integrazionetotale.it> ---
I'm experiencing the same problem on a debian kernel 3.11-0.bpo.2-486.
(I think it could be the same)
These are the relevant lines in Xorg.0.log
[ 21.460] (II) NOUVEAU driver Date: Thu Nov 7 14:56:48 2013 +1000
[ 21.460] (II) NOUVEAU driver for NVIDIA chipset families :
[ 21.467] (--) NOUVEAU(0): Chipset: "NVIDIA NV1A"
[ 21.467] (II) NOUVEAU(0): Creating default Display subsection in Screen
section
[ 21.467] (==) NOUVEAU(0): Depth 16, (--) framebuffer bpp 16
[ 21.467] (==) NOUVEAU(0): RGB weight 565
[ 21.467] (==) NOUVEAU(0): Default visual is TrueColor
[ 21.467] (==) NOUVEAU(0): Using HW cursor
[ 21.467] (==) NOUVEAU(0): GLX sync to VBlank disabled.
[ 21.467] (==) NOUVEAU(0): Page flipping enabled
[ 21.467] (==) NOUVEAU(0): Swap limit set to 2 [Max allowed 2]
[ 21.590] (II) NOUVEAU(0): Output DVI-I-1 has no monitor section
[ 21.690] (II) NOUVEAU(0): EDID for output DVI-I-1
[ 21.690] (II) NOUVEAU(0): Printing probed modes for output DVI-I-1
[ 21.690] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024
1048 1184
1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 21.690] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840
968 1056
600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 21.690] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824
896 1024
600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 21.690] (II) NOUVEAU(0): Modeline "848x480"x60.0 33.75 848 864
976 1088
480 486 494 517 +hsync +vsync (31.0 kHz e)
[ 21.690] (II) NOUVEAU(0): Modeline "640x480"x59.9 25.18 640 656
752 800
480 489 492 525 -hsync -vsync (31.5 kHz e)
[ 21.690] (II) NOUVEAU(0): Output DVI-I-1 connected
[ 21.690] (II) NOUVEAU(0): Using exact sizes for initial modes
[ 21.690] (II) NOUVEAU(0): Output DVI-I-1 using initial mode 1024x768
[ 21.690] (II) NOUVEAU(0): Using default gamma of (1.0, 1.0, 1.0) unless
otherwise stated.
[ 21.690] (--) NOUVEAU(0): Virtual size is 1024x768 (pitch 0)
[ 21.690] (**) NOUVEAU(0): Driver mode "1024x768": 65.0 MHz
(scaled from
0.0 MHz), 48.4 kHz, 60.0 Hz
[ 21.690] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024
1048 1184
1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 21.690] (**) NOUVEAU(0): Driver mode "800x600": 40.0 MHz (scaled
from 0.0
MHz), 37.9 kHz, 60.3 Hz
[ 21.690] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840
968 1056
600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 21.690] (**) NOUVEAU(0): Driver mode "800x600": 36.0 MHz (scaled
from 0.0
MHz), 35.2 kHz, 56.2 Hz
[ 21.690] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824
896 1024
600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 21.690] (**) NOUVEAU(0): Driver mode "848x480": 33.8 MHz (scaled
from 0.0
MHz), 31.0 kHz, 60.0 Hz
[ 21.691] (II) NOUVEAU(0): Modeline "848x480"x60.0 33.75 848 864
976 1088
480 486 494 517 +hsync +vsync (31.0 kHz e)
[ 21.691] (**) NOUVEAU(0): Driver mode "640x480": 25.2 MHz (scaled
from 0.0
MHz), 31.5 kHz, 59.9 Hz
[ 21.691] (II) NOUVEAU(0): Modeline "640x480"x59.9 25.18 640 656
752 800
480 489 492 525 -hsync -vsync (31.5 kHz e)
[ 21.691] (==) NOUVEAU(0): DPI set to (96, 96)
[ 21.720] (II) NOUVEAU(0): Opened GPU channel 0
[ 21.732] (II) NOUVEAU(0): [DRI2] Setup complete
[ 21.732] (II) NOUVEAU(0): [DRI2] DRI driver: nouveau_vieux
[ 21.732] (II) NOUVEAU(0): [DRI2] VDPAU driver: nouveau_vieux
[ 21.801] (==) NOUVEAU(0): Backing store disabled
[ 21.801] (==) NOUVEAU(0): Silken mouse enabled
[ 21.803] (==) NOUVEAU(0): DPMS enabled
[ 21.803] (II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR
disabled message.
[ 22.934] (II) NOUVEAU(0): NVEnterVT is called.
[ 22.955] (II) NOUVEAU(0): Setting screen physical size to 270 x 203
The monitor is driven with wrong frequencies (as stated by an osd message).
The strange is that the monitor is connected to a VGA, not DVI (no DVI is
present at all)
Tell me if I can help someway
Thank you
Claudio
--
You are receiving this mail because:
You are the assignee for the bug.
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.freedesktop.org/archives/nouveau/attachments/20131211/2d896f3f/attachment.html>
bugzilla-daemon at freedesktop.org
2013-Dec-11 18:08 UTC
[Nouveau] [Bug 63481] [NV1A] No monitor signal since commit ebb945a94 (3.7-rc1)
https://bugs.freedesktop.org/show_bug.cgi?id=63481 --- Comment #6 from Ilia Mirkin <imirkin at alum.mit.edu> --- Well, my fix only went into v3.13-rc1, so your 3.11 kernel almost certainly doesn't have the fix. Please try the latest rc kernel and see if your issue still appears there. Do note that not all is well with NV1A after this fix -- there is still another NV1A bug open about resume issues. -- You are receiving this mail because: You are the assignee for the bug. -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.freedesktop.org/archives/nouveau/attachments/20131211/2da4b842/attachment-0001.html>
bugzilla-daemon at freedesktop.org
2013-Dec-13 17:38 UTC
[Nouveau] [Bug 63481] [NV1A] No monitor signal since commit ebb945a94 (3.7-rc1)
https://bugs.freedesktop.org/show_bug.cgi?id=63481
Claudio Laurita <claudio.laurita at integrazionetotale.it> changed:
What |Removed |Added
----------------------------------------------------------------------------
Status|REOPENED |RESOLVED
Resolution|--- |FIXED
--- Comment #7 from Claudio Laurita <claudio.laurita at
integrazionetotale.it> ---
Thank you very much for your answer.
I'm a bit in troubles with upgrading to 3.13, at the moment.
But I manually applied your patch to current debian 3.11 source and it works
perfectly for me
Claudio
--
You are receiving this mail because:
You are the assignee for the bug.
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.freedesktop.org/archives/nouveau/attachments/20131213/03465b54/attachment.html>