Vangelis Tsiatsianas via llvm-dev
2019-Nov-14 12:44 UTC
[llvm-dev] [MCDisassembler] Identifying instructions that definitely access memory
[ This question has already been asked in lldb-dev (see attached emails), however it was suggested that I should forward the question to llvm-dev, since it is more relevant to MC Disassembler than LLDB. ] Hello, I am looking for a way to track memory stores and save both the old and the new value of the memory location being modified using LLDB, as described below: 1. Recognize the instructions that definitely access memory before they execute, based on their opcode. 2. Tell whether each operand is a register or a memory location. 3. If itβs a memory location, check whether it is a load or store destination. 4. In case it is a store destination, fetch and save current value from memory. 5. Execute instruction. 6. Fetch and save new value from memory. However, I was not able to find a cross-architecture API that covers all of the conditions above and more specifically Instruction::DoesStore() and Operand::IsStoreDestination(). Last but not least, I should notice that the target is executed in single-step mode, so I do have control right before and after the execution of every instruction. Thank you very much, in advance! π β Vangelis> Begin forwarded message: > > From: Vangelis Tsiatsianas > Subject: Re: Identifying instructions that definitely access memory > Date: 5 November 2019 - 14:43:29 EET > To: via lldb-dev <lldb-dev at lists.llvm.org> > > Hello, > > I decided to try once more with a follow-up email, since my previous one got no responses (I hope itβs not considered rude to send more than one message in a row for a particular question). > > To sum up and clarify my previous question, what I need is a way to track memory stores and save both the old and the new value of the memory location being modified. > > My thinking so far: > Recognize the instructions that definitely access memory before they execute, based on their opcode. > Tell whether each operand is a register or a memory location. > If itβs a memory location, check whether it is a load or store destination. > In case it is a store destination, fetch and save current value from memory. > Execute instruction. > Fetch and save new value from memory. > > However, I was not able to find a cross-architecture API that covers all of the conditions above and more specifically Instruction::DoesStore() and Operand::IsStoreDestination(). > > Last but not least, I should notice that the target is executed in single-step mode, so I do have control right before and after the execution of every instruction. > > Thanks, again, in advance! π > > > β Vangelis > > >> On 21 Oct 2019, at 08:54, Vangelis Tsiatsianas wrote: >> >> Hello, >> >> I am looking for a way to identify loads, stores and any other kind of instruction that definitely perform memory access and extract the address operand(s), however I was not able to find a cross-architecture API. The closest I stumbled upon are "MCInstrDesc::mayLoad()" and "MCInstrDesc::mayStore()", but I understand that their results are just a hint, so I would then need to examine the instruction name or opcode in order to find out whether itβs actually a load or store and which operand(s) is (are) memory address(es) and also do so for each architecture separately, which I would really like to avoid. >> >> Is there a way to identify such instructions either by examining them through the disassembler (e.g. "DoesLoad()" | "DoesStore()") before they execute or right after they perform any kind of memory access? >> >> Thank you very much, in advance! π >> >> >> β Vangelis >> >> >-------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.llvm.org/pipermail/llvm-dev/attachments/20191114/12c3e771/attachment.html>
Vangelis Tsiatsianas via llvm-dev
2019-Nov-15 13:57 UTC
[llvm-dev] [MCDisassembler] Identifying instructions that definitely access memory
[ This question has already been asked in lldb-dev (see attached emails), however it was suggested that I should forward the question to llvm-dev, since it is more relevant to MC Disassembler than LLDB. ] Hello, I am looking for a way to track memory stores and save both the old and the new value of the memory location being modified using LLDB, as described below: 1. Recognize the instructions that definitely access memory before they execute, based on their opcode. 2. Tell whether each operand is a register or a memory location. 3. If itβs a memory location, check whether it is a load or store destination. 4. In case it is a store destination, fetch and save current value from memory. 5. Execute instruction. 6. Fetch and save new value from memory. However, I was not able to find a cross-architecture API that covers all of the conditions above and more specifically Instruction::DoesStore() and Operand::IsStoreDestination(). Last but not least, I should notice that the target is executed in single-step mode, so I do have control right before and after the execution of every instruction. Thank you very much, in advance! π β Vangelis> Begin forwarded message: > > From: Vangelis Tsiatsianas > Subject: Re: Identifying instructions that definitely access memory > Date: 5 November 2019 - 14:43:29 EET > To: via lldb-dev <lldb-dev at lists.llvm.org <mailto:lldb-dev at lists.llvm.org>> > > Hello, > > I decided to try once more with a follow-up email, since my previous one got no responses (I hope itβs not considered rude to send more than one message in a row for a particular question). > > To sum up and clarify my previous question, what I need is a way to track memory stores and save both the old and the new value of the memory location being modified. > > My thinking so far: > 1. Recognize the instructions that definitely access memory before they execute, based on their opcode. > 2. Tell whether each operand is a register or a memory location. > 3. If itβs a memory location, check whether it is a load or store destination. > 4. In case it is a store destination, fetch and save current value from memory. > 5. Execute instruction. > 6. Fetch and save new value from memory. > > However, I was not able to find a cross-architecture API that covers all of the conditions above and more specifically Instruction::DoesStore() and Operand::IsStoreDestination(). > > Last but not least, I should notice that the target is executed in single-step mode, so I do have control right before and after the execution of every instruction. > > Thanks, again, in advance! π > > > β Vangelis > > >> On 21 Oct 2019, at 08:54, Vangelis Tsiatsianas wrote: >> >> Hello, >> >> I am looking for a way to identify loads, stores and any other kind of instruction that definitely perform memory access and extract the address operand(s), however I was not able to find a cross-architecture API. The closest I stumbled upon are "MCInstrDesc::mayLoad()" and "MCInstrDesc::mayStore()", but I understand that their results are just a hint, so I would then need to examine the instruction name or opcode in order to find out whether itβs actually a load or store and which operand(s) is (are) memory address(es) and also do so for each architecture separately, which I would really like to avoid. >> >> Is there a way to identify such instructions either by examining them through the disassembler (e.g. "DoesLoad()" | "DoesStore()") before they execute or right after they perform any kind of memory access? >> >> Thank you very much, in advance! π >> >> >> β Vangelis >> >-------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.llvm.org/pipermail/llvm-dev/attachments/20191115/857e71c2/attachment.html>
Daniel Sanders via llvm-dev
2019-Nov-18 21:40 UTC
[llvm-dev] [MCDisassembler] Identifying instructions that definitely access memory
> On Nov 15, 2019, at 05:57, Vangelis Tsiatsianas via llvm-dev <llvm-dev at lists.llvm.org> wrote: > > [ This question has already been asked in lldb-dev (see attached emails), however it was suggested that I should forward the question to llvm-dev, since it is more relevant to MC Disassembler than LLDB. ] > > > Hello, > > I am looking for a way to track memory stores and save both the old and the new value of the memory location being modified using LLDB, as described below: > > 1. Recognize the instructions that definitely access memory before they execute, based on their opcode.I'm only aware of API's that report the possibility of storing. For example, MCInstrDesc::mayStore(). Whether an instruction with mayStore() actually does store is target specific and can depend on the exact inputs or the state of the processor or memory at the time. For example, an atomic store might depend on the value of memory or a physical register at the time it executes.> 2. Tell whether each operand is a register or a memory location.MCOperandInfo::OperandType can sometimes tell you this but not all targets use it accurately (many get away with OPERAND_UNKNOWN most of the time) so I don't know how useful that will be.> 3. If itβs a memory location, check whether it is a load or store destination.This is target specific and depends on the opcode. As far as I know the MC layer doesn't have API's to determine this. The MIR had some of this information in the MachineMemoryOperand but that information didn't know which operand(s) were involved and is discarded when lowering to the MC layer.> 4. In case it is a store destination, fetch and save current value from memory.The MC layer doesn't know how the address is calculated so it can't tell LLDB which location to fetch. You'd need to implement something that knew how each instruction calculates the address.> 5. Execute instruction.LLDB would presumably handle this bit by single-stepping.> 6. Fetch and save new value from memory.This is the same as for 4.> However, I was not able to find a cross-architecture API that covers all of the conditions above and more specifically Instruction::DoesStore() and Operand::IsStoreDestination(). > > Last but not least, I should notice that the target is executed in single-step mode, so I do have control right before and after the execution of every instruction. > > Thank you very much, in advance! π > > > β Vangelis > > >> Begin forwarded message: >> >> From: Vangelis Tsiatsianas >> Subject: Re: Identifying instructions that definitely access memory >> Date: 5 November 2019 - 14:43:29 EET >> To: via lldb-dev <lldb-dev at lists.llvm.org <mailto:lldb-dev at lists.llvm.org>> >> >> Hello, >> >> I decided to try once more with a follow-up email, since my previous one got no responses (I hope itβs not considered rude to send more than one message in a row for a particular question). >> >> To sum up and clarify my previous question, what I need is a way to track memory stores and save both the old and the new value of the memory location being modified. >> >> My thinking so far: >> 1. Recognize the instructions that definitely access memory before they execute, based on their opcode. >> 2. Tell whether each operand is a register or a memory location. >> 3. If itβs a memory location, check whether it is a load or store destination. >> 4. In case it is a store destination, fetch and save current value from memory. >> 5. Execute instruction. >> 6. Fetch and save new value from memory. >> >> However, I was not able to find a cross-architecture API that covers all of the conditions above and more specifically Instruction::DoesStore() and Operand::IsStoreDestination(). >> >> Last but not least, I should notice that the target is executed in single-step mode, so I do have control right before and after the execution of every instruction. >> >> Thanks, again, in advance! π >> >> >> β Vangelis >> >> >>> On 21 Oct 2019, at 08:54, Vangelis Tsiatsianas wrote: >>> >>> Hello, >>> >>> I am looking for a way to identify loads, stores and any other kind of instruction that definitely perform memory access and extract the address operand(s), however I was not able to find a cross-architecture API. The closest I stumbled upon are "MCInstrDesc::mayLoad()" and "MCInstrDesc::mayStore()", but I understand that their results are just a hint, so I would then need to examine the instruction name or opcode in order to find out whether itβs actually a load or store and which operand(s) is (are) memory address(es) and also do so for each architecture separately, which I would really like to avoid. >>> >>> Is there a way to identify such instructions either by examining them through the disassembler (e.g. "DoesLoad()" | "DoesStore()") before they execute or right after they perform any kind of memory access? >>> >>> Thank you very much, in advance! π >>> >>> >>> β Vangelis >>> >> > > _______________________________________________ > LLVM Developers mailing list > llvm-dev at lists.llvm.org > https://lists.llvm.org/cgi-bin/mailman/listinfo/llvm-dev-------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.llvm.org/pipermail/llvm-dev/attachments/20191118/59c0834c/attachment.html>