thr3ads.net - llvm dev - [LLVMdev] Why is the loop vectorizer not working on my function? [Oct 2013]

If this information is useful, please help other people find it:
Share via:

Frank Winter

2013-Oct-26 18:40 UTC

[LLVMdev] Why is the loop vectorizer not working on my function?

Hi Arnold,

adding '-debug-only=loop-vectorize' to the command gives:

LV: Checking a loop in "bar"
LV: Found a loop: L0
LV: Found an induction variable.
LV: Found an unidentified write ptr:   %7 = load float** %6
LV: Found an unidentified read ptr:   %10 = load float** %9
LV: Found an unidentified read ptr:   %13 = load float** %12
LV: We need to do 2 pointer comparisons.
LV: We can't vectorize because we can't find the array bounds.
LV: Can't vectorize due to memory conflicts
LV: Not vectorizing.

It can't find the loop bounds if we use the overflow version of add. 
That's a good point. I should mark this addition to not overflow.

When using the non-overflow version I get:

LV: Checking a loop in "bar"
LV: Found a loop: L0
LV: Found an induction variable.
LV: Found an unidentified write ptr:   %7 = load float** %6
LV: Found an unidentified read ptr:   %10 = load float** %9
LV: Found an unidentified read ptr:   %13 = load float** %12
LV: Found a runtime check ptr:  %20 = getelementptr float* %7, i32 %14
LV: Found a runtime check ptr:  %15 = getelementptr float* %10, i32 %14
LV: Found a runtime check ptr:  %17 = getelementptr float* %13, i32 %14
LV: We need to do 2 pointer comparisons.
LV: We can perform a memory runtime check if needed.
LV: We need a runtime memory check.
LV: We can vectorize this loop (with a runtime bound check)!
LV: Found trip count: 0
LV: The Widest type: 32 bits.
LV: The Widest register is: 32 bits.
LV: Found an estimated cost of 0 for VF 1 For instruction:   %14 = phi 
i32 [ %21, %L0 ], [ %1, %entrypoint ]
LV: Found an estimated cost of 0 for VF 1 For instruction:   %15 = 
getelementptr float* %10, i32 %14
LV: Found an estimated cost of 1 for VF 1 For instruction:   %16 = load 
float* %15
LV: Found an estimated cost of 0 for VF 1 For instruction:   %17 = 
getelementptr float* %13, i32 %14
LV: Found an estimated cost of 1 for VF 1 For instruction:   %18 = load 
float* %17
LV: Found an estimated cost of 1 for VF 1 For instruction:   %19 = fmul 
float %18, %16
LV: Found an estimated cost of 0 for VF 1 For instruction:   %20 = 
getelementptr float* %7, i32 %14
LV: Found an estimated cost of 1 for VF 1 For instruction:   store float 
%19, float* %20
LV: Found an estimated cost of 1 for VF 1 For instruction:   %21 = add 
nsw i32 %14, 1
LV: Found an estimated cost of 1 for VF 1 For instruction:   %22 = icmp 
sge i32 %21, %4
LV: Found an estimated cost of 1 for VF 1 For instruction:   br i1 %22, 
label %L1, label %L0
LV: Scalar loop costs: 7.
LV: Selecting VF = : 1.
LV: The target has 8 vector registers
LV(REG): Calculating max register usage:
LV(REG): At #0 Interval # 0
LV(REG): At #1 Interval # 1
LV(REG): At #2 Interval # 2
LV(REG): At #3 Interval # 2
LV(REG): At #4 Interval # 3
LV(REG): At #5 Interval # 3
LV(REG): At #6 Interval # 2
LV(REG): At #8 Interval # 1
LV(REG): At #9 Interval # 1
LV(REG): Found max usage: 3
LV(REG): Found invariant usage: 5
LV(REG): LoopSize: 11
LV: Vectorization is possible but not beneficial.
LV: Found a vectorizable loop (1) in saxpy_real.gvn.mod.ll
LV: Unroll Factor is 1

It's not beneficial? I didn't expect that. Do you have a descriptive 
explanation why it's not beneficial?

Frank



On 26/10/13 13:03, Arnold wrote:> Hi Frank,
>
> Sent from my iPhone
>
>> On Oct 26, 2013, at 10:03 AM, Frank Winter <fwinter at jlab.org>
wrote:
>>
>> My function implements a simple loop:
>>
>> void bar( int start, int end, float* A, float* B, float* C)
>> {
>>     for (int i=start; i<end;++i)
>>        A[i] = B[i] * C[i];
>> }
>>
>> This looks pretty much like the standard example. However, I built the
function
>> with the IRBuilder, thus not coming from C and clang. Also I changed
slightly
>> the function's signature:
>>
>> define void @bar([8 x i8]* %arg_ptr) {
>> entrypoint:
>>   %0 = bitcast [8 x i8]* %arg_ptr to i32*
>>   %1 = load i32* %0
>>   %2 = getelementptr [8 x i8]* %arg_ptr, i32 1
>>   %3 = bitcast [8 x i8]* %2 to i32*
>>   %4 = load i32* %3
>>   %5 = getelementptr [8 x i8]* %arg_ptr, i32 2
>>   %6 = bitcast [8 x i8]* %5 to float**
>>   %7 = load float** %6
>>   %8 = getelementptr [8 x i8]* %arg_ptr, i32 3
>>   %9 = bitcast [8 x i8]* %8 to float**
>>   %10 = load float** %9
>>   %11 = getelementptr [8 x i8]* %arg_ptr, i32 4
>>   %12 = bitcast [8 x i8]* %11 to float**
>>   %13 = load float** %12
>>   br label %L0
>>
>> L0:                                               ; preds = %L0,
%entrypoint
>>   %14 = phi i32 [ %21, %L0 ], [ %1, %entrypoint ]
>>   %15 = getelementptr float* %10, i32 %14
>>   %16 = load float* %15
>>   %17 = getelementptr float* %13, i32 %14
>>   %18 = load float* %17
>>   %19 = fmul float %18, %16
>>   %20 = getelementptr float* %7, i32 %14
>>   store float %19, float* %20
>>   %21 = add i32 %14, 1
> Try
> %21 = add nsw i32 %14, 1
> instead for no-signed wrapping arithmetic.
>
> If that is not working please post the output of opt ...
-debug-only=loop-vectorize ...
>
>
>
>>   %22 = icmp sge i32 %21, %4
>>   br i1 %22, label %L1, label %L0
>>
>> L1:                                               ; preds = %L0
>>   ret void
>> }
>>
>>
>> As you can see, I use the phi instruction for the loop index. I notice
>> that clang prefers stack allocation. So, I am not sure what's the
>> problem that the loop vectorizer is not working here.
>> I tried many things, like specifying an architecture with vector
>> units, enforcing the vector width. No success.
>>
>> opt -march=x64-64 -loop-vectorize -force-vector-width=8 -S loop.ll
>>
>> The only explanation I have is the use of the phi instruction. Is this
>> preventing to vectorize the loop?
>>
>> Frank
>>
>>
>> _______________________________________________
>> LLVM Developers mailing list
>> LLVMdev at cs.uiuc.edu         http://llvm.cs.uiuc.edu
>> http://lists.cs.uiuc.edu/mailman/listinfo/llvmdev

Hal Finkel

2013-Oct-26 19:08 UTC

head link

[LLVMdev] Why is the loop vectorizer not working on my function?

----- Original Message -----> Hi Arnold,
> 
> adding '-debug-only=loop-vectorize' to the command gives:
> 
> LV: Checking a loop in "bar"
> LV: Found a loop: L0
> LV: Found an induction variable.
> LV: Found an unidentified write ptr:   %7 = load float** %6
> LV: Found an unidentified read ptr:   %10 = load float** %9
> LV: Found an unidentified read ptr:   %13 = load float** %12
> LV: We need to do 2 pointer comparisons.
> LV: We can't vectorize because we can't find the array bounds.
> LV: Can't vectorize due to memory conflicts
> LV: Not vectorizing.
> 
> It can't find the loop bounds if we use the overflow version of add.
> That's a good point. I should mark this addition to not overflow.
> 
> When using the non-overflow version I get:
> 
> LV: Checking a loop in "bar"
> LV: Found a loop: L0
> LV: Found an induction variable.
> LV: Found an unidentified write ptr:   %7 = load float** %6
> LV: Found an unidentified read ptr:   %10 = load float** %9
> LV: Found an unidentified read ptr:   %13 = load float** %12
> LV: Found a runtime check ptr:  %20 = getelementptr float* %7, i32
> %14
> LV: Found a runtime check ptr:  %15 = getelementptr float* %10, i32
> %14
> LV: Found a runtime check ptr:  %17 = getelementptr float* %13, i32
> %14
> LV: We need to do 2 pointer comparisons.
> LV: We can perform a memory runtime check if needed.
> LV: We need a runtime memory check.
> LV: We can vectorize this loop (with a runtime bound check)!
> LV: Found trip count: 0
> LV: The Widest type: 32 bits.
> LV: The Widest register is: 32 bits.
> LV: Found an estimated cost of 0 for VF 1 For instruction:   %14 > phi
> i32 [ %21, %L0 ], [ %1, %entrypoint ]
> LV: Found an estimated cost of 0 for VF 1 For instruction:   %15 >
getelementptr float* %10, i32 %14
> LV: Found an estimated cost of 1 for VF 1 For instruction:   %16 > load
> float* %15
> LV: Found an estimated cost of 0 for VF 1 For instruction:   %17 >
getelementptr float* %13, i32 %14
> LV: Found an estimated cost of 1 for VF 1 For instruction:   %18 > load
> float* %17
> LV: Found an estimated cost of 1 for VF 1 For instruction:   %19 > fmul
> float %18, %16
> LV: Found an estimated cost of 0 for VF 1 For instruction:   %20 >
getelementptr float* %7, i32 %14
> LV: Found an estimated cost of 1 for VF 1 For instruction:   store
> float
> %19, float* %20
> LV: Found an estimated cost of 1 for VF 1 For instruction:   %21 > add
> nsw i32 %14, 1
> LV: Found an estimated cost of 1 for VF 1 For instruction:   %22 > icmp
> sge i32 %21, %4
> LV: Found an estimated cost of 1 for VF 1 For instruction:   br i1
> %22,
> label %L1, label %L0
> LV: Scalar loop costs: 7.
> LV: Selecting VF = : 1.
> LV: The target has 8 vector registers
> LV(REG): Calculating max register usage:
> LV(REG): At #0 Interval # 0
> LV(REG): At #1 Interval # 1
> LV(REG): At #2 Interval # 2
> LV(REG): At #3 Interval # 2
> LV(REG): At #4 Interval # 3
> LV(REG): At #5 Interval # 3
> LV(REG): At #6 Interval # 2
> LV(REG): At #8 Interval # 1
> LV(REG): At #9 Interval # 1
> LV(REG): Found max usage: 3
> LV(REG): Found invariant usage: 5
> LV(REG): LoopSize: 11
> LV: Vectorization is possible but not beneficial.
> LV: Found a vectorizable loop (1) in saxpy_real.gvn.mod.ll
> LV: Unroll Factor is 1
> 
> It's not beneficial? I didn't expect that. Do you have a
descriptive
> explanation why it's not beneficial?
It looks like the vectorizer is not picking up a TTI implementation from a
target with vector registers (likely, you're just seeing the basic cost
model). For what target is this?

 -Hal
> 
> Frank
> 
> 
> 
> On 26/10/13 13:03, Arnold wrote:
> > Hi Frank,
> >
> > Sent from my iPhone
> >
> >> On Oct 26, 2013, at 10:03 AM, Frank Winter <fwinter at
jlab.org>
> >> wrote:
> >>
> >> My function implements a simple loop:
> >>
> >> void bar( int start, int end, float* A, float* B, float* C)
> >> {
> >>     for (int i=start; i<end;++i)
> >>        A[i] = B[i] * C[i];
> >> }
> >>
> >> This looks pretty much like the standard example. However, I built
> >> the function
> >> with the IRBuilder, thus not coming from C and clang. Also I
> >> changed slightly
> >> the function's signature:
> >>
> >> define void @bar([8 x i8]* %arg_ptr) {
> >> entrypoint:
> >>   %0 = bitcast [8 x i8]* %arg_ptr to i32*
> >>   %1 = load i32* %0
> >>   %2 = getelementptr [8 x i8]* %arg_ptr, i32 1
> >>   %3 = bitcast [8 x i8]* %2 to i32*
> >>   %4 = load i32* %3
> >>   %5 = getelementptr [8 x i8]* %arg_ptr, i32 2
> >>   %6 = bitcast [8 x i8]* %5 to float**
> >>   %7 = load float** %6
> >>   %8 = getelementptr [8 x i8]* %arg_ptr, i32 3
> >>   %9 = bitcast [8 x i8]* %8 to float**
> >>   %10 = load float** %9
> >>   %11 = getelementptr [8 x i8]* %arg_ptr, i32 4
> >>   %12 = bitcast [8 x i8]* %11 to float**
> >>   %13 = load float** %12
> >>   br label %L0
> >>
> >> L0:                                               ; preds = %L0,
> >> %entrypoint
> >>   %14 = phi i32 [ %21, %L0 ], [ %1, %entrypoint ]
> >>   %15 = getelementptr float* %10, i32 %14
> >>   %16 = load float* %15
> >>   %17 = getelementptr float* %13, i32 %14
> >>   %18 = load float* %17
> >>   %19 = fmul float %18, %16
> >>   %20 = getelementptr float* %7, i32 %14
> >>   store float %19, float* %20
> >>   %21 = add i32 %14, 1
> > Try
> > %21 = add nsw i32 %14, 1
> > instead for no-signed wrapping arithmetic.
> >
> > If that is not working please post the output of opt ...
> > -debug-only=loop-vectorize ...
> >
> >
> >
> >>   %22 = icmp sge i32 %21, %4
> >>   br i1 %22, label %L1, label %L0
> >>
> >> L1:                                               ; preds = %L0
> >>   ret void
> >> }
> >>
> >>
> >> As you can see, I use the phi instruction for the loop index. I
> >> notice
> >> that clang prefers stack allocation. So, I am not sure what's
the
> >> problem that the loop vectorizer is not working here.
> >> I tried many things, like specifying an architecture with vector
> >> units, enforcing the vector width. No success.
> >>
> >> opt -march=x64-64 -loop-vectorize -force-vector-width=8 -S loop.ll
> >>
> >> The only explanation I have is the use of the phi instruction. Is
> >> this
> >> preventing to vectorize the loop?
> >>
> >> Frank
> >>
> >>
> >> _______________________________________________
> >> LLVM Developers mailing list
> >> LLVMdev at cs.uiuc.edu         http://llvm.cs.uiuc.edu
> >> http://lists.cs.uiuc.edu/mailman/listinfo/llvmdev
> 
> 
> _______________________________________________
> LLVM Developers mailing list
> LLVMdev at cs.uiuc.edu         http://llvm.cs.uiuc.edu
> http://lists.cs.uiuc.edu/mailman/listinfo/llvmdev
> 
-- 
Hal Finkel
Assistant Computational Scientist
Leadership Computing Facility
Argonne National Laboratory

Frank Winter

2013-Oct-26 19:16 UTC

head link

[LLVMdev] Why is the loop vectorizer not working on my function?

Hi Hal!

I am using the 'x86_64' target. Below the complete module dump and here 
the command line:

opt -march=x64-64 -loop-vectorize -debug-only=loop-vectorize -S test.ll

Frank


; ModuleID = 'test.ll'

target datalayout = 
"e-p:64:64:64-S128-i1:8:8-i8:8:8-i16:16:16-i32:32:32-i64:64:64-f16:16:16-f32:32:32-f64:64:64-f128:128:128-v64:64:64-v128:12
8:128-a0:0:64-s0:64:64-f80:128:128-n8:16:32:64"

target triple = "x86_64-unknown-linux-elf"

define void @bar([8 x i8]* %arg_ptr) {
entrypoint:
   %0 = bitcast [8 x i8]* %arg_ptr to i32*
   %1 = load i32* %0
   %2 = getelementptr [8 x i8]* %arg_ptr, i32 1
   %3 = bitcast [8 x i8]* %2 to i32*
   %4 = load i32* %3
   %5 = getelementptr [8 x i8]* %arg_ptr, i32 2
   %6 = bitcast [8 x i8]* %5 to float**
   %7 = load float** %6
   %8 = getelementptr [8 x i8]* %arg_ptr, i32 3
   %9 = bitcast [8 x i8]* %8 to float**
   %10 = load float** %9
   %11 = getelementptr [8 x i8]* %arg_ptr, i32 4
   %12 = bitcast [8 x i8]* %11 to float**
   %13 = load float** %12
   br label %L0

L0:                                               ; preds = %L0, %entrypoint
   %14 = phi i32 [ %21, %L0 ], [ %1, %entrypoint ]
   %15 = getelementptr float* %10, i32 %14
   %16 = load float* %15
   %17 = getelementptr float* %13, i32 %14
   %18 = load float* %17
   %19 = fmul float %18, %16
   %20 = getelementptr float* %7, i32 %14
   store float %19, float* %20
   %21 = add nsw i32 %14, 1
   %22 = icmp sge i32 %21, %4
   br i1 %22, label %L1, label %L0

L1:                                               ; preds = %L0
   ret void
}



On 26/10/13 15:08, Hal Finkel wrote:> ----- Original Message -----
>> Hi Arnold,
>>
>> adding '-debug-only=loop-vectorize' to the command gives:
>>
>> LV: Checking a loop in "bar"
>> LV: Found a loop: L0
>> LV: Found an induction variable.
>> LV: Found an unidentified write ptr:   %7 = load float** %6
>> LV: Found an unidentified read ptr:   %10 = load float** %9
>> LV: Found an unidentified read ptr:   %13 = load float** %12
>> LV: We need to do 2 pointer comparisons.
>> LV: We can't vectorize because we can't find the array bounds.
>> LV: Can't vectorize due to memory conflicts
>> LV: Not vectorizing.
>>
>> It can't find the loop bounds if we use the overflow version of
add.
>> That's a good point. I should mark this addition to not overflow.
>>
>> When using the non-overflow version I get:
>>
>> LV: Checking a loop in "bar"
>> LV: Found a loop: L0
>> LV: Found an induction variable.
>> LV: Found an unidentified write ptr:   %7 = load float** %6
>> LV: Found an unidentified read ptr:   %10 = load float** %9
>> LV: Found an unidentified read ptr:   %13 = load float** %12
>> LV: Found a runtime check ptr:  %20 = getelementptr float* %7, i32
>> %14
>> LV: Found a runtime check ptr:  %15 = getelementptr float* %10, i32
>> %14
>> LV: Found a runtime check ptr:  %17 = getelementptr float* %13, i32
>> %14
>> LV: We need to do 2 pointer comparisons.
>> LV: We can perform a memory runtime check if needed.
>> LV: We need a runtime memory check.
>> LV: We can vectorize this loop (with a runtime bound check)!
>> LV: Found trip count: 0
>> LV: The Widest type: 32 bits.
>> LV: The Widest register is: 32 bits.
>> LV: Found an estimated cost of 0 for VF 1 For instruction:   %14
>> phi
>> i32 [ %21, %L0 ], [ %1, %entrypoint ]
>> LV: Found an estimated cost of 0 for VF 1 For instruction:   %15
>> getelementptr float* %10, i32 %14
>> LV: Found an estimated cost of 1 for VF 1 For instruction:   %16
>> load
>> float* %15
>> LV: Found an estimated cost of 0 for VF 1 For instruction:   %17
>> getelementptr float* %13, i32 %14
>> LV: Found an estimated cost of 1 for VF 1 For instruction:   %18
>> load
>> float* %17
>> LV: Found an estimated cost of 1 for VF 1 For instruction:   %19
>> fmul
>> float %18, %16
>> LV: Found an estimated cost of 0 for VF 1 For instruction:   %20
>> getelementptr float* %7, i32 %14
>> LV: Found an estimated cost of 1 for VF 1 For instruction:   store
>> float
>> %19, float* %20
>> LV: Found an estimated cost of 1 for VF 1 For instruction:   %21
>> add
>> nsw i32 %14, 1
>> LV: Found an estimated cost of 1 for VF 1 For instruction:   %22
>> icmp
>> sge i32 %21, %4
>> LV: Found an estimated cost of 1 for VF 1 For instruction:   br i1
>> %22,
>> label %L1, label %L0
>> LV: Scalar loop costs: 7.
>> LV: Selecting VF = : 1.
>> LV: The target has 8 vector registers
>> LV(REG): Calculating max register usage:
>> LV(REG): At #0 Interval # 0
>> LV(REG): At #1 Interval # 1
>> LV(REG): At #2 Interval # 2
>> LV(REG): At #3 Interval # 2
>> LV(REG): At #4 Interval # 3
>> LV(REG): At #5 Interval # 3
>> LV(REG): At #6 Interval # 2
>> LV(REG): At #8 Interval # 1
>> LV(REG): At #9 Interval # 1
>> LV(REG): Found max usage: 3
>> LV(REG): Found invariant usage: 5
>> LV(REG): LoopSize: 11
>> LV: Vectorization is possible but not beneficial.
>> LV: Found a vectorizable loop (1) in saxpy_real.gvn.mod.ll
>> LV: Unroll Factor is 1
>>
>> It's not beneficial? I didn't expect that. Do you have a
descriptive
>> explanation why it's not beneficial?
> It looks like the vectorizer is not picking up a TTI implementation from a
target with vector registers (likely, you're just seeing the basic cost
model). For what target is this?
>
>   -Hal
>
>> Frank
>>
>>
>>
>> On 26/10/13 13:03, Arnold wrote:
>>> Hi Frank,
>>>
>>> Sent from my iPhone
>>>
>>>> On Oct 26, 2013, at 10:03 AM, Frank Winter <fwinter at
jlab.org>
>>>> wrote:
>>>>
>>>> My function implements a simple loop:
>>>>
>>>> void bar( int start, int end, float* A, float* B, float* C)
>>>> {
>>>>      for (int i=start; i<end;++i)
>>>>         A[i] = B[i] * C[i];
>>>> }
>>>>
>>>> This looks pretty much like the standard example. However, I
built
>>>> the function
>>>> with the IRBuilder, thus not coming from C and clang. Also I
>>>> changed slightly
>>>> the function's signature:
>>>>
>>>> define void @bar([8 x i8]* %arg_ptr) {
>>>> entrypoint:
>>>>    %0 = bitcast [8 x i8]* %arg_ptr to i32*
>>>>    %1 = load i32* %0
>>>>    %2 = getelementptr [8 x i8]* %arg_ptr, i32 1
>>>>    %3 = bitcast [8 x i8]* %2 to i32*
>>>>    %4 = load i32* %3
>>>>    %5 = getelementptr [8 x i8]* %arg_ptr, i32 2
>>>>    %6 = bitcast [8 x i8]* %5 to float**
>>>>    %7 = load float** %6
>>>>    %8 = getelementptr [8 x i8]* %arg_ptr, i32 3
>>>>    %9 = bitcast [8 x i8]* %8 to float**
>>>>    %10 = load float** %9
>>>>    %11 = getelementptr [8 x i8]* %arg_ptr, i32 4
>>>>    %12 = bitcast [8 x i8]* %11 to float**
>>>>    %13 = load float** %12
>>>>    br label %L0
>>>>
>>>> L0:                                               ; preds =
%L0,
>>>> %entrypoint
>>>>    %14 = phi i32 [ %21, %L0 ], [ %1, %entrypoint ]
>>>>    %15 = getelementptr float* %10, i32 %14
>>>>    %16 = load float* %15
>>>>    %17 = getelementptr float* %13, i32 %14
>>>>    %18 = load float* %17
>>>>    %19 = fmul float %18, %16
>>>>    %20 = getelementptr float* %7, i32 %14
>>>>    store float %19, float* %20
>>>>    %21 = add i32 %14, 1
>>> Try
>>> %21 = add nsw i32 %14, 1
>>> instead for no-signed wrapping arithmetic.
>>>
>>> If that is not working please post the output of opt ...
>>> -debug-only=loop-vectorize ...
>>>
>>>
>>>
>>>>    %22 = icmp sge i32 %21, %4
>>>>    br i1 %22, label %L1, label %L0
>>>>
>>>> L1:                                               ; preds = %L0
>>>>    ret void
>>>> }
>>>>
>>>>
>>>> As you can see, I use the phi instruction for the loop index. I
>>>> notice
>>>> that clang prefers stack allocation. So, I am not sure
what's the
>>>> problem that the loop vectorizer is not working here.
>>>> I tried many things, like specifying an architecture with
vector
>>>> units, enforcing the vector width. No success.
>>>>
>>>> opt -march=x64-64 -loop-vectorize -force-vector-width=8 -S
loop.ll
>>>>
>>>> The only explanation I have is the use of the phi instruction.
Is
>>>> this
>>>> preventing to vectorize the loop?
>>>>
>>>> Frank
>>>>
>>>>
>>>> _______________________________________________
>>>> LLVM Developers mailing list
>>>> LLVMdev at cs.uiuc.edu         http://llvm.cs.uiuc.edu
>>>> http://lists.cs.uiuc.edu/mailman/listinfo/llvmdev
>>
>> _______________________________________________
>> LLVM Developers mailing list
>> LLVMdev at cs.uiuc.edu         http://llvm.cs.uiuc.edu
>> http://lists.cs.uiuc.edu/mailman/listinfo/llvmdev
>>

Reasonably Related Threads

Search for more maybe matching threads

llvm dev - Oct 2013 - [LLVMdev] Why is the loop vectorizer not working on my function?

[LLVMdev] Why is the loop vectorizer not working on my function?

[LLVMdev] Why is the loop vectorizer not working on my function?

[LLVMdev] Why is the loop vectorizer not working on my function?

Reasonably Related Threads