On Thursday, May 30, 2019 1:23:53 AM CEST Mauro Carvalho Chehab wrote:> Mostly due to x86 and acpi conversion, several documentation > links are still pointing to the old file. Fix them.For the Italian documentation I just send I patch to fix them in a dedicated patch> > Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung at kernel.org> > --- > Documentation/acpi/dsd/leds.txt | 2 +- > Documentation/admin-guide/kernel-parameters.rst | 6 +++--- > Documentation/admin-guide/kernel-parameters.txt | 16 ++++++++-------- > Documentation/admin-guide/ras.rst | 2 +- > .../devicetree/bindings/net/fsl-enetc.txt | 7 +++---- > .../bindings/pci/amlogic,meson-pcie.txt | 2 +- > .../bindings/regulator/qcom,rpmh-regulator.txt | 2 +- > Documentation/devicetree/booting-without-of.txt | 2 +- > Documentation/driver-api/gpio/board.rst | 2 +- > Documentation/driver-api/gpio/consumer.rst | 2 +- > .../firmware-guide/acpi/enumeration.rst | 2 +- > .../firmware-guide/acpi/method-tracing.rst | 2 +- > Documentation/i2c/instantiating-devices | 2 +- > Documentation/sysctl/kernel.txt | 4 ++-- > .../translations/it_IT/process/howto.rst | 2 +- > .../it_IT/process/stable-kernel-rules.rst | 4 ++-- > .../translations/zh_CN/process/4.Coding.rst | 2 +- > Documentation/x86/x86_64/5level-paging.rst | 2 +- > Documentation/x86/x86_64/boot-options.rst | 4 ++-- > .../x86/x86_64/fake-numa-for-cpusets.rst | 2 +- > MAINTAINERS | 6 +++--- > arch/arm/Kconfig | 2 +- > arch/arm64/kernel/kexec_image.c | 2 +- > arch/powerpc/Kconfig | 2 +- > arch/x86/Kconfig | 16 ++++++++-------- > arch/x86/Kconfig.debug | 2 +- > arch/x86/boot/header.S | 2 +- > arch/x86/entry/entry_64.S | 2 +- > arch/x86/include/asm/bootparam_utils.h | 2 +- > arch/x86/include/asm/page_64_types.h | 2 +- > arch/x86/include/asm/pgtable_64_types.h | 2 +- > arch/x86/kernel/cpu/microcode/amd.c | 2 +- > arch/x86/kernel/kexec-bzimage64.c | 2 +- > arch/x86/kernel/pci-dma.c | 2 +- > arch/x86/mm/tlb.c | 2 +- > arch/x86/platform/pvh/enlighten.c | 2 +- > drivers/acpi/Kconfig | 10 +++++----- > drivers/net/ethernet/faraday/ftgmac100.c | 2 +- > .../fieldbus/Documentation/fieldbus_dev.txt | 4 ++-- > drivers/vhost/vhost.c | 2 +- > include/acpi/acpi_drivers.h | 2 +- > include/linux/fs_context.h | 2 +- > include/linux/lsm_hooks.h | 2 +- > mm/Kconfig | 2 +- > security/Kconfig | 2 +- > tools/include/linux/err.h | 2 +- > tools/objtool/Documentation/stack-validation.txt | 4 ++-- > tools/testing/selftests/x86/protection_keys.c | 2 +- > 48 files changed, 77 insertions(+), 78 deletions(-) > > diff --git a/Documentation/acpi/dsd/leds.txt > b/Documentation/acpi/dsd/leds.txt index 81a63af42ed2..cc58b1a574c5 100644 > --- a/Documentation/acpi/dsd/leds.txt > +++ b/Documentation/acpi/dsd/leds.txt > @@ -96,4 +96,4 @@ where > > <URL:http://www.uefi.org/sites/default/files/resources/_DSD-hierarchical-da > ta-extension-UUID-v1.1.pdf>, referenced 2019-02-21. > > -[7] Documentation/acpi/dsd/data-node-reference.txt > +[7] Documentation/firmware-guide/acpi/dsd/data-node-references.rst > diff --git a/Documentation/admin-guide/kernel-parameters.rst > b/Documentation/admin-guide/kernel-parameters.rst index > 0124980dca2d..8d3273e32eb1 100644 > --- a/Documentation/admin-guide/kernel-parameters.rst > +++ b/Documentation/admin-guide/kernel-parameters.rst > @@ -167,7 +167,7 @@ parameter is applicable:: > X86-32 X86-32, aka i386 architecture is enabled. > X86-64 X86-64 architecture is enabled. > More X86-64 boot options can be found in > - Documentation/x86/x86_64/boot-options.txt.> + Documentation/x86/x86_64/boot-options.rst. > X86 Either 32-bit or 64-bit x86 (same as X86-32+X86-64) > X86_UV SGI UV support is enabled. > XEN Xen support is enabled > @@ -181,10 +181,10 @@ In addition, the following text indicates that the > option:: Parameters denoted with BOOT are actually interpreted by the boot > loader, and have no meaning to the kernel directly. > Do not modify the syntax of boot loader parameters without extreme > -need or coordination with <Documentation/x86/boot.txt>. > +need or coordination with <Documentation/x86/boot.rst>. > > There are also arch-specific kernel-parameters not documented here. > -See for example <Documentation/x86/x86_64/boot-options.txt>. > +See for example <Documentation/x86/x86_64/boot-options.rst>. > > Note that ALL kernel parameters listed below are CASE SENSITIVE, and that > a trailing = on the name of any parameter states that that parameter will > diff --git a/Documentation/admin-guide/kernel-parameters.txt > b/Documentation/admin-guide/kernel-parameters.txt index > 138f6664b2e2..4a02d1346635 100644 > --- a/Documentation/admin-guide/kernel-parameters.txt > +++ b/Documentation/admin-guide/kernel-parameters.txt > @@ -53,7 +53,7 @@ > ACPI_DEBUG_PRINT statements, e.g., > ACPI_DEBUG_PRINT((ACPI_DB_INFO, ... > The debug_level mask defaults to "info".See> - Documentation/acpi/debug.txt for moreinformation about> + Documentation/firmware-guide/acpi/debug.rstfor more information about> debug layers and levels. > > Enable processor driver info messages: > @@ -963,7 +963,7 @@ > for details. > > nompx [X86] Disables Intel Memory ProtectionExtensions.> - See Documentation/x86/intel_mpx.txt formore> + See Documentation/x86/intel_mpx.rst formore> information about the feature. > > nopku [X86] Disable Memory Protection Keys CPUfeature found> @@ -1189,7 +1189,7 @@ > that is to be dynamically loaded by Linux.If there are> multiple variables with the same name butwith different> vendor GUIDs, all of them will be loaded.See> - Documentation/acpi/ssdt-overlays.txt fordetails.> + Documentation/admin-guide/acpi/ssdt-overlays.rst for details.> > > eisa_irq_edge= [PARISC,HW] > @@ -2383,7 +2383,7 @@ > > mce [X86-32] Machine Check Exception > > - mce=option [X86-64] See Documentation/x86/x86_64/boot-options.txt> + mce=option [X86-64] See Documentation/x86/x86_64/boot-options.rst> > md= [HW] RAID subsystems devices and level > See Documentation/admin-guide/md.rst. > @@ -2439,7 +2439,7 @@ > set according to the > CONFIG_MEMORY_HOTPLUG_DEFAULT_ONLINEkernel config> option. > - See Documentation/memory-hotplug.txt. > + See Documentation/admin-guide/mm/memory-hotplug.rst.> > memmap=exactmap [KNL,X86] Enable setting of an exact > E820 memory map, as specified by the user. > @@ -2528,7 +2528,7 @@ > mem_encrypt=on: ActivateSME> mem_encrypt=off: Do not activate SME > > - Refer to Documentation/x86/amd-memory-encryption.txt> + Refer to Documentation/virtual/kvm/amd-memory-encryption.rst> for details on when memory encryption canbe activated.> > mem_sleep_default= [SUSPEND] Default system suspend mode: > @@ -3528,7 +3528,7 @@ > See Documentation/blockdev/paride.txt. > > pirq= [SMP,APIC] Manual mp-table setup > - See Documentation/x86/i386/IO-APIC.txt. > + See Documentation/x86/i386/IO-APIC.rst. > > plip= [PPT,NET] Parallel port network link > Format: { parport<nr> | timid | 0 } > @@ -5054,7 +5054,7 @@ > Can be used multiple times for multipledevices.> > vga= [BOOT,X86-32] Select a particular videomode> - See Documentation/x86/boot.txt and > + See Documentation/x86/boot.rst and > Documentation/svga.txt. > Use vga=ask for menu. > This is actually a boot loader parameter;the value is> diff --git a/Documentation/admin-guide/ras.rst > b/Documentation/admin-guide/ras.rst index c7495e42e6f4..2b20f5f7380d 100644 > --- a/Documentation/admin-guide/ras.rst > +++ b/Documentation/admin-guide/ras.rst > @@ -199,7 +199,7 @@ Architecture (MCA)\ [#f3]_. > mode). > > .. [#f3] For more details about the Machine Check Architecture (MCA), > - please read Documentation/x86/x86_64/machinecheck at the Kernel tree. > + please read Documentation/x86/x86_64/machinecheck.rst at the Kernel tree. > > EDAC - Error Detection And Correction > ************************************* > diff --git a/Documentation/devicetree/bindings/net/fsl-enetc.txt > b/Documentation/devicetree/bindings/net/fsl-enetc.txt index > c812e25ae90f..25fc687419db 100644 > --- a/Documentation/devicetree/bindings/net/fsl-enetc.txt > +++ b/Documentation/devicetree/bindings/net/fsl-enetc.txt > @@ -16,8 +16,8 @@ Required properties: > In this case, the ENETC node should include a "mdio" sub-node > that in turn should contain the "ethernet-phy" node describing the > external phy. Below properties are required, their bindings > -already defined in ethernet.txt or phy.txt, under > -Documentation/devicetree/bindings/net/*. > +already defined in Documentation/devicetree/bindings/net/ethernet.txt or > +Documentation/devicetree/bindings/net/phy.txt. > > Required: > > @@ -51,8 +51,7 @@ Example: > connection: > > In this case, the ENETC port node defines a fixed link connection, > -as specified by "fixed-link.txt", under > -Documentation/devicetree/bindings/net/*. > +as specified by Documentation/devicetree/bindings/net/fixed-link.txt. > > Required: > > diff --git a/Documentation/devicetree/bindings/pci/amlogic,meson-pcie.txt > b/Documentation/devicetree/bindings/pci/amlogic,meson-pcie.txt index > 12b18f82d441..efa2c8b9b85a 100644 > --- a/Documentation/devicetree/bindings/pci/amlogic,meson-pcie.txt > +++ b/Documentation/devicetree/bindings/pci/amlogic,meson-pcie.txt > @@ -3,7 +3,7 @@ Amlogic Meson AXG DWC PCIE SoC controller > Amlogic Meson PCIe host controller is based on the Synopsys DesignWare PCI > core. It shares common functions with the PCIe DesignWare core driver and > inherits common properties defined in > -Documentation/devicetree/bindings/pci/designware-pci.txt. > +Documentation/devicetree/bindings/pci/designware-pcie.txt. > > Additional properties are described here: > > diff --git > a/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.txt > b/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.txt index > 7ef2dbe48e8a..14d2eee96b3d 100644 > --- a/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.txt > +++ b/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.txt > @@ -97,7 +97,7 @@ Second Level Nodes - Regulators > sent for this regulator including those which arefor a> strictly lower power state. > > -Other properties defined in Documentation/devicetree/bindings/regulator.txt > +Other properties defined in > Documentation/devicetree/bindings/regulator/regulator.txt may also be used. > regulator-initial-mode and regulator-allowed-modes may be specified for > VRM regulators using mode values from > include/dt-bindings/regulator/qcom,rpmh-regulator.h. > regulator-allow-bypass diff --git > a/Documentation/devicetree/booting-without-of.txt > b/Documentation/devicetree/booting-without-of.txt index > e86bd2f64117..60f8640f2b2f 100644 > --- a/Documentation/devicetree/booting-without-of.txt > +++ b/Documentation/devicetree/booting-without-of.txt > @@ -277,7 +277,7 @@ it with special cases. > the decompressor (the real mode entry point goes to the same 32bit > entry point once it switched into protected mode). That entry point > supports one calling convention which is documented in > - Documentation/x86/boot.txt > + Documentation/x86/boot.rst > The physical pointer to the device-tree block (defined in chapter II) > is passed via setup_data which requires at least boot protocol 2.09. > The type filed is defined as > diff --git a/Documentation/driver-api/gpio/board.rst > b/Documentation/driver-api/gpio/board.rst index b37f3f7b8926..ce91518bf9f4 > 100644 > --- a/Documentation/driver-api/gpio/board.rst > +++ b/Documentation/driver-api/gpio/board.rst > @@ -101,7 +101,7 @@ with the help of _DSD (Device Specific Data), introduced > in ACPI 5.1:: } > > For more information about the ACPI GPIO bindings see > -Documentation/acpi/gpio-properties.txt. > +Documentation/firmware-guide/acpi/gpio-properties.rst. > > Platform Data > ------------- > diff --git a/Documentation/driver-api/gpio/consumer.rst > b/Documentation/driver-api/gpio/consumer.rst index > 5e4d8aa68913..fdecb6d711db 100644 > --- a/Documentation/driver-api/gpio/consumer.rst > +++ b/Documentation/driver-api/gpio/consumer.rst > @@ -437,7 +437,7 @@ case, it will be handled by the GPIO subsystem > automatically. However, if the _DSD is not present, the mappings between > GpioIo()/GpioInt() resources and GPIO connection IDs need to be provided by > device drivers. > > -For details refer to Documentation/acpi/gpio-properties.txt > +For details refer to Documentation/firmware-guide/acpi/gpio-properties.rst > > > Interacting With the Legacy GPIO Subsystem > diff --git a/Documentation/firmware-guide/acpi/enumeration.rst > b/Documentation/firmware-guide/acpi/enumeration.rst index > 850be9696931..1252617b520f 100644 > --- a/Documentation/firmware-guide/acpi/enumeration.rst > +++ b/Documentation/firmware-guide/acpi/enumeration.rst > @@ -339,7 +339,7 @@ a code like this:: > There are also devm_* versions of these functions which release the > descriptors once the device is released. > > -See Documentation/acpi/gpio-properties.txt for more information about the > +See Documentation/firmware-guide/acpi/gpio-properties.rst for more > information about the _DSD binding related to GPIOs. > > MFD devices > diff --git a/Documentation/firmware-guide/acpi/method-tracing.rst > b/Documentation/firmware-guide/acpi/method-tracing.rst index > d0b077b73f5f..0aa7e2c5d32a 100644 > --- a/Documentation/firmware-guide/acpi/method-tracing.rst > +++ b/Documentation/firmware-guide/acpi/method-tracing.rst > @@ -68,7 +68,7 @@ c. Filter out the debug layer/level matched logs when the > specified > > Where: > 0xXXXXXXXX/0xYYYYYYYY > - Refer to Documentation/acpi/debug.txt for possible debug layer/level > + Refer to Documentation/firmware-guide/acpi/debug.rst for possible > debug layer/level masking values. > \PPPP.AAAA.TTTT.HHHH > Full path of a control method that can be found in the ACPI namespace. > diff --git a/Documentation/i2c/instantiating-devices > b/Documentation/i2c/instantiating-devices index 0d85ac1935b7..5a3e2f331e8c > 100644 > --- a/Documentation/i2c/instantiating-devices > +++ b/Documentation/i2c/instantiating-devices > @@ -85,7 +85,7 @@ Method 1c: Declare the I2C devices via ACPI > ------------------------------------------- > > ACPI can also describe I2C devices. There is special documentation for this > -which is currently located at Documentation/acpi/enumeration.txt. +which > is currently located at Documentation/firmware-guide/acpi/enumeration.rst. > > > Method 2: Instantiate the devices explicitly > diff --git a/Documentation/sysctl/kernel.txt > b/Documentation/sysctl/kernel.txt index f0c86fbb3b48..92f7f34b021a 100644 > --- a/Documentation/sysctl/kernel.txt > +++ b/Documentation/sysctl/kernel.txt > @@ -155,7 +155,7 @@ is 0x15 and the full version number is 0x234, this file > will contain the value 340 = 0x154. > > See the type_of_loader and ext_loader_type fields in > -Documentation/x86/boot.txt for additional information. > +Documentation/x86/boot.rst for additional information. > > =============================================================> > @@ -167,7 +167,7 @@ The complete bootloader version number. In the example > above, this file will contain the value 564 = 0x234. > > See the type_of_loader and ext_loader_ver fields in > -Documentation/x86/boot.txt for additional information. > +Documentation/x86/boot.rst for additional information. > > =============================================================> > diff --git a/Documentation/translations/it_IT/process/howto.rst > b/Documentation/translations/it_IT/process/howto.rst index > 9903ac7c566b..44e6077730e8 100644 > --- a/Documentation/translations/it_IT/process/howto.rst > +++ b/Documentation/translations/it_IT/process/howto.rst > @@ -131,7 +131,7 @@ Di seguito una lista di file che sono presenti nei > sorgente del kernel e che "Linux kernel patch submission format" > http://linux.yyz.us/patch-format.html > > - :ref:`Documentation/process/translations/it_IT/stable-api-nonsense.rst > <it_stable_api_nonsense>` + > :ref:`Documentation/translations/it_IT/process/stable-api-nonsense.rst > <it_stable_api_nonsense>` > > Questo file descrive la motivazioni sottostanti la conscia decisione di > non avere un API stabile all'interno del kernel, incluso cose come: diff > --git a/Documentation/translations/it_IT/process/stable-kernel-rules.rst > b/Documentation/translations/it_IT/process/stable-kernel-rules.rst index > 48e88e5ad2c5..4f206cee31a7 100644 > --- a/Documentation/translations/it_IT/process/stable-kernel-rules.rst > +++ b/Documentation/translations/it_IT/process/stable-kernel-rules.rst > @@ -33,7 +33,7 @@ Regole sul tipo di patch che vengono o non vengono > accettate nei sorgenti - Non deve includere alcuna correzione "banale" > (correzioni grammaticali, pulizia dagli spazi bianchi, eccetera). > - Deve rispettare le regole scritte in > - :ref:`Documentation/translation/it_IT/process/submitting-patches.rst > <it_submittingpatches>` + > :ref:`Documentation/translations/it_IT/process/submitting-patches.rst > <it_submittingpatches>` - Questa patch o una equivalente deve esistere gi? > nei sorgenti principali di Linux > > @@ -43,7 +43,7 @@ Procedura per sottomettere patch per i sorgenti -stable > > - Se la patch contiene modifiche a dei file nelle cartelle net/ o > drivers/net, allora seguite le linee guida descritte in > - :ref:`Documentation/translation/it_IT/networking/netdev-FAQ.rst > <it_netdev-FAQ>`; + > :ref:`Documentation/translations/it_IT/networking/netdev-FAQ.rst > <it_netdev-FAQ>`; ma solo dopo aver verificato al seguente indirizzo che la > patch non sia gi? in coda: > > https://patchwork.ozlabs.org/bundle/davem/stable/?series=&submitter=&state> *&q=&archive= diff --git > a/Documentation/translations/zh_CN/process/4.Coding.rst > b/Documentation/translations/zh_CN/process/4.Coding.rst index > 5301e9d55255..8bb777941394 100644 > --- a/Documentation/translations/zh_CN/process/4.Coding.rst > +++ b/Documentation/translations/zh_CN/process/4.Coding.rst > @@ -241,7 +241,7 @@ scripts/coccinelle???????????????????? > > ???????????????????sysfs?/proc???????????? > ?????????????????????????????? > -Documentation/abi/readme?????????????????????? > +Documentation/ABI/README?????????????????????? > > ?? :ref:`Documentation/admin-guide/kernel-parameters.rst > <kernelparameters>` ????????????????????????????????????? > diff --git a/Documentation/x86/x86_64/5level-paging.rst > b/Documentation/x86/x86_64/5level-paging.rst index > ab88a4514163..44856417e6a5 100644 > --- a/Documentation/x86/x86_64/5level-paging.rst > +++ b/Documentation/x86/x86_64/5level-paging.rst > @@ -20,7 +20,7 @@ physical address space. This "ought to be enough for > anybody" ?. QEMU 2.9 and later support 5-level paging. > > Virtual memory layout for 5-level paging is described in > -Documentation/x86/x86_64/mm.txt > +Documentation/x86/x86_64/mm.rst > > > Enabling 5-level paging > diff --git a/Documentation/x86/x86_64/boot-options.rst > b/Documentation/x86/x86_64/boot-options.rst index > 2f69836b8445..6a4285a3c7a4 100644 > --- a/Documentation/x86/x86_64/boot-options.rst > +++ b/Documentation/x86/x86_64/boot-options.rst > @@ -9,7 +9,7 @@ only the AMD64 specific ones are listed here. > > Machine check > ============> -Please see Documentation/x86/x86_64/machinecheck for sysfs runtime > tunables. +Please see Documentation/x86/x86_64/machinecheck.rst for sysfs > runtime tunables. > > mce=off > Disable machine check > @@ -89,7 +89,7 @@ APICs > Don't use the local APIC (alias for i386 compatibility) > > pirq=... > - See Documentation/x86/i386/IO-APIC.txt > + See Documentation/x86/i386/IO-APIC.rst > > noapictimer > Don't set up the APIC timer > diff --git a/Documentation/x86/x86_64/fake-numa-for-cpusets.rst > b/Documentation/x86/x86_64/fake-numa-for-cpusets.rst index > 74fbb78b3c67..04df57b9aa3f 100644 > --- a/Documentation/x86/x86_64/fake-numa-for-cpusets.rst > +++ b/Documentation/x86/x86_64/fake-numa-for-cpusets.rst > @@ -18,7 +18,7 @@ For more information on the features of cpusets, see > Documentation/cgroup-v1/cpusets.txt. > There are a number of different configurations you can use for your needs. > For more information on the numa=fake command line option and its various > ways of -configuring fake nodes, see > Documentation/x86/x86_64/boot-options.txt. +configuring fake nodes, see > Documentation/x86/x86_64/boot-options.rst. > > For the purposes of this introduction, we'll assume a very primitive NUMA > emulation setup of "numa=fake=4*512,". This will split our system memory > into diff --git a/MAINTAINERS b/MAINTAINERS > index 5cfbea4ce575..a38d7273705a 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -3874,7 +3874,7 @@ > F: Documentation/devicetree/bindings/hwmon/cirrus,lochnagar.txt > F: Documentation/devicetree/bindings/pinctrl/cirrus,lochnagar.txt > F: Documentation/devicetree/bindings/regulator/cirrus,lochnagar.txt > F: Documentation/devicetree/bindings/sound/cirrus,lochnagar.txt > -F: Documentation/hwmon/lochnagar > +F: Documentation/hwmon/lochnagar.rst > > CISCO FCOE HBA DRIVER > M: Satish Kharat <satishkh at cisco.com> > @@ -11272,7 +11272,7 @@ NXP FXAS21002C DRIVER > M: Rui Miguel Silva <rmfrfs at gmail.com> > L: linux-iio at vger.kernel.org > S: Maintained > -F: Documentation/devicetree/bindings/iio/gyroscope/fxas21002c.txt > +F: Documentation/devicetree/bindings/iio/gyroscope/nxp,fxas21002c.txt > F: drivers/iio/gyro/fxas21002c_core.c > F: drivers/iio/gyro/fxas21002c.h > F: drivers/iio/gyro/fxas21002c_i2c.c > @@ -13043,7 +13043,7 @@ M: Niklas Cassel <niklas.cassel at linaro.org> > L: netdev at vger.kernel.org > S: Maintained > F: drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c > -F: Documentation/devicetree/bindings/net/qcom,dwmac.txt > +F: Documentation/devicetree/bindings/net/qcom,ethqos.txt > > QUALCOMM GENERIC INTERFACE I2C DRIVER > M: Alok Chauhan <alokc at codeaurora.org> > diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig > index 8869742a85df..0f220264cc23 100644 > --- a/arch/arm/Kconfig > +++ b/arch/arm/Kconfig > @@ -1263,7 +1263,7 @@ config SMP > uniprocessor machines. On a uniprocessor machine, the kernel > will run faster if you say N here. > > - See also <file:Documentation/x86/i386/IO-APIC.txt>, > + See also <file:Documentation/x86/i386/IO-APIC.rst>, > <file:Documentation/lockup-watchdogs.txt> and the SMP-HOWTOavailable at> <http://tldp.org/HOWTO/SMP-HOWTO.html>. > > diff --git a/arch/arm64/kernel/kexec_image.c > b/arch/arm64/kernel/kexec_image.c index 07bf740bea91..31cc2f423aa8 100644 > --- a/arch/arm64/kernel/kexec_image.c > +++ b/arch/arm64/kernel/kexec_image.c > @@ -53,7 +53,7 @@ static void *image_load(struct kimage *image, > > /* > * We require a kernel with an unambiguous Image header. Per > - * Documentation/booting.txt, this is the case when image_size > + * Documentation/arm64/booting.txt, this is the case whenimage_size> * is non-zero (practically speaking, since v3.17). > */ > h = (struct arm64_image_header *)kernel; > diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig > index 8c1c636308c8..e868d2bd48b8 100644 > --- a/arch/powerpc/Kconfig > +++ b/arch/powerpc/Kconfig > @@ -898,7 +898,7 @@ config PPC_MEM_KEYS > page-based protections, but without requiring modification ofthe> page tables when an application changes protection domains. > > - For details, see Documentation/vm/protection-keys.rst > + For details, see Documentation/x86/protection-keys.rst > > If unsure, say y. > > diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig > index 2bbbd4d1ba31..78fdf2dd71d1 100644 > --- a/arch/x86/Kconfig > +++ b/arch/x86/Kconfig > @@ -395,7 +395,7 @@ config SMP > Y to "Enhanced Real Time Clock Support", below. The "AdvancedPower> Management" code will be disabled if you say Y here. > > - See also <file:Documentation/x86/i386/IO-APIC.txt>, > + See also <file:Documentation/x86/i386/IO-APIC.rst>, > <file:Documentation/lockup-watchdogs.txt> and the SMP-HOWTOavailable at> <http://www.tldp.org/docs.html#howto>. > > @@ -1290,7 +1290,7 @@ config MICROCODE > the Linux kernel. > > The preferred method to load microcode from a detached initrd is > described - in Documentation/x86/microcode.txt. For that youneed to> enable + in Documentation/x86/microcode.rst. For that you need to enable > CONFIG_BLK_DEV_INITRD in order for the loader to be able to scan the initrd > for microcode blobs. > > @@ -1329,7 +1329,7 @@ config MICROCODE_OLD_INTERFACE > It is inadequate because it runs too late to be able to properly > load microcode on a machine and it needs special tools. Instead,you> should've switched to the early loading method with the initrdor> - builtin microcode by now: Documentation/x86/microcode.txt > + builtin microcode by now: Documentation/x86/microcode.rst > > config X86_MSR > tristate "/dev/cpu/*/msr - Model-specific register support" > @@ -1478,7 +1478,7 @@ config X86_5LEVEL > A kernel with the option enabled can be booted on machines that > support 4- or 5-level paging. > > - See Documentation/x86/x86_64/5level-paging.txt for more > + See Documentation/x86/x86_64/5level-paging.rst for more > information. > > Say N if unsure. > @@ -1626,7 +1626,7 @@ config ARCH_MEMORY_PROBE > depends on X86_64 && MEMORY_HOTPLUG > help > This option enables a sysfs memory/probe interface for testing. > - See Documentation/memory-hotplug.txt for more information. > + See Documentation/admin-guide/mm/memory-hotplug.rst for more > information. If you are unsure how to answer this question, answer N. > > config ARCH_PROC_KCORE_TEXT > @@ -1783,7 +1783,7 @@ config MTRR > You can safely say Y even if your machine doesn't have MTRRs,you'll> just add about 9 KB to your kernel. > > - See <file:Documentation/x86/mtrr.txt> for more information. > + See <file:Documentation/x86/mtrr.rst> for more information. > > config MTRR_SANITIZER > def_bool y > @@ -1895,7 +1895,7 @@ config X86_INTEL_MPX > process and adds some branches to paths used during > exec() and munmap(). > > - For details, see Documentation/x86/intel_mpx.txt > + For details, see Documentation/x86/intel_mpx.rst > > If unsure, say N. > > @@ -1911,7 +1911,7 @@ config X86_INTEL_MEMORY_PROTECTION_KEYS > page-based protections, but without requiring modification ofthe> page tables when an application changes protection domains. > > - For details, see Documentation/x86/protection-keys.txt > + For details, see Documentation/x86/protection-keys.rst > > If unsure, say y. > > diff --git a/arch/x86/Kconfig.debug b/arch/x86/Kconfig.debug > index f730680dc818..59f598543203 100644 > --- a/arch/x86/Kconfig.debug > +++ b/arch/x86/Kconfig.debug > @@ -156,7 +156,7 @@ config IOMMU_DEBUG > code. When you use it make sure you have a big enough > IOMMU/AGP aperture. Most of the options enabled by this can > be set more finegrained using the iommu= command line > - options. See Documentation/x86/x86_64/boot-options.txt for more > + options. See Documentation/x86/x86_64/boot-options.rst for more > details. > > config IOMMU_LEAK > diff --git a/arch/x86/boot/header.S b/arch/x86/boot/header.S > index 850b8762e889..90d791ca1a95 100644 > --- a/arch/x86/boot/header.S > +++ b/arch/x86/boot/header.S > @@ -313,7 +313,7 @@ start_sys_seg: .word SYSSEG# obsolete and meaningless,> but just > > type_of_loader: .byte 0 # 0 means ancientbootloader, newer> # bootloaders knowto change this.> - # SeeDocumentation/x86/boot.txt for> + # SeeDocumentation/x86/boot.rst for> # assigned ids > > # flags, unused bits must be zero (RFU) bit within loadflags > diff --git a/arch/x86/entry/entry_64.S b/arch/x86/entry/entry_64.S > index 11aa3b2afa4d..33f9fc38d014 100644 > --- a/arch/x86/entry/entry_64.S > +++ b/arch/x86/entry/entry_64.S > @@ -8,7 +8,7 @@ > * > * entry.S contains the system-call and fault low-level handling routines. > * > - * Some of this is documented in Documentation/x86/entry_64.txt > + * Some of this is documented in Documentation/x86/entry_64.rst > * > * A note on terminology: > * - iret frame: Architecture defined interrupt frame from SS to RIP > diff --git a/arch/x86/include/asm/bootparam_utils.h > b/arch/x86/include/asm/bootparam_utils.h index f6f6ef436599..101eb944f13c > 100644 > --- a/arch/x86/include/asm/bootparam_utils.h > +++ b/arch/x86/include/asm/bootparam_utils.h > @@ -24,7 +24,7 @@ static void sanitize_boot_params(struct boot_params > *boot_params) * IMPORTANT NOTE TO BOOTLOADER AUTHORS: do not simply clear > * this field. The purpose of this field is to guarantee > * compliance with the x86 boot spec located in > - * Documentation/x86/boot.txt . That spec says that the > + * Documentation/x86/boot.rst . That spec says that the > * *whole* structure should be cleared, after which only the > * portion defined by struct setup_header (boot_params->hdr) > * should be copied in. > diff --git a/arch/x86/include/asm/page_64_types.h > b/arch/x86/include/asm/page_64_types.h index 793c14c372cb..288b065955b7 > 100644 > --- a/arch/x86/include/asm/page_64_types.h > +++ b/arch/x86/include/asm/page_64_types.h > @@ -48,7 +48,7 @@ > > #define __START_KERNEL_map _AC(0xffffffff80000000, UL) > > -/* See Documentation/x86/x86_64/mm.txt for a description of the memory map. > */ +/* See Documentation/x86/x86_64/mm.rst for a description of the memory > map. */ > > #define __PHYSICAL_MASK_SHIFT 52 > > diff --git a/arch/x86/include/asm/pgtable_64_types.h > b/arch/x86/include/asm/pgtable_64_types.h index 88bca456da99..52e5f5f2240d > 100644 > --- a/arch/x86/include/asm/pgtable_64_types.h > +++ b/arch/x86/include/asm/pgtable_64_types.h > @@ -103,7 +103,7 @@ extern unsigned int ptrs_per_p4d; > #define PGDIR_MASK (~(PGDIR_SIZE - 1)) > > /* > - * See Documentation/x86/x86_64/mm.txt for a description of the memory map. > + * See Documentation/x86/x86_64/mm.rst for a description of the memory > map. * > * Be very careful vs. KASLR when changing anything here. The KASLR address > * range must not overlap with anything except the KASAN shadow area, which > diff --git a/arch/x86/kernel/cpu/microcode/amd.c > b/arch/x86/kernel/cpu/microcode/amd.c index e1f3ba19ba54..06d4e67f31ab > 100644 > --- a/arch/x86/kernel/cpu/microcode/amd.c > +++ b/arch/x86/kernel/cpu/microcode/amd.c > @@ -61,7 +61,7 @@ static u8 amd_ucode_patch[PATCH_MAX_SIZE]; > > /* > * Microcode patch container file is prepended to the initrd in cpio > - * format. See Documentation/x86/microcode.txt > + * format. See Documentation/x86/microcode.rst > */ > static const char > ucode_path[] __maybe_unused = "kernel/x86/microcode/AuthenticAMD.bin"; > diff --git a/arch/x86/kernel/kexec-bzimage64.c > b/arch/x86/kernel/kexec-bzimage64.c index 22f60dd26460..b07e7069b09e 100644 > --- a/arch/x86/kernel/kexec-bzimage64.c > +++ b/arch/x86/kernel/kexec-bzimage64.c > @@ -416,7 +416,7 @@ static void *bzImage64_load(struct kimage *image, char > *kernel, efi_map_offset = params_cmdline_sz; > efi_setup_data_offset = efi_map_offset + ALIGN(efi_map_sz, 16); > > - /* Copy setup header onto bootparams. Documentation/x86/boot.txt*/> + /* Copy setup header onto bootparams. Documentation/x86/boot.rst */ > setup_header_size = 0x0202 + kernel[0x0201] - setup_hdr_offset; > > /* Is there a limit on setup header size? */ > diff --git a/arch/x86/kernel/pci-dma.c b/arch/x86/kernel/pci-dma.c > index dcd272dbd0a9..f62b498b18fb 100644 > --- a/arch/x86/kernel/pci-dma.c > +++ b/arch/x86/kernel/pci-dma.c > @@ -70,7 +70,7 @@ void __init pci_iommu_alloc(void) > } > > /* > - * See <Documentation/x86/x86_64/boot-options.txt> for the iommu kernel > + * See <Documentation/x86/x86_64/boot-options.rst> for the iommu kernel > * parameter documentation. > */ > static __init int iommu_setup(char *p) > diff --git a/arch/x86/mm/tlb.c b/arch/x86/mm/tlb.c > index 7f61431c75fb..400c1ba033aa 100644 > --- a/arch/x86/mm/tlb.c > +++ b/arch/x86/mm/tlb.c > @@ -711,7 +711,7 @@ void native_flush_tlb_others(const struct cpumask > *cpumask, } > > /* > - * See Documentation/x86/tlb.txt for details. We choose 33 > + * See Documentation/x86/tlb.rst for details. We choose 33 > * because it is large enough to cover the vast majority (at > * least 95%) of allocations, and is small enough that we are > * confident it will not cause too much overhead. Each single > diff --git a/arch/x86/platform/pvh/enlighten.c > b/arch/x86/platform/pvh/enlighten.c index 1861a2ba0f2b..c0a502f7e3a7 100644 > --- a/arch/x86/platform/pvh/enlighten.c > +++ b/arch/x86/platform/pvh/enlighten.c > @@ -86,7 +86,7 @@ static void __init init_pvh_bootparams(bool xen_guest) > } > > /* > - * See Documentation/x86/boot.txt. > + * See Documentation/x86/boot.rst. > * > * Version 2.12 supports Xen entry point but we will use defaultx86/PC> * environment (i.e. hardware_subarch 0). > diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig > index 283ee94224c6..2438f37f2ca1 100644 > --- a/drivers/acpi/Kconfig > +++ b/drivers/acpi/Kconfig > @@ -333,7 +333,7 @@ config ACPI_CUSTOM_DSDT_FILE > depends on !STANDALONE > help > This option supports a custom DSDT by linking it into thekernel.> - See Documentation/acpi/dsdt-override.txt > + See Documentation/admin-guide/acpi/dsdt-override.rst > > Enter the full path name to the file which includes the AmlCode > or dsdt_aml_code declaration. > @@ -355,7 +355,7 @@ config ACPI_TABLE_UPGRADE > This option provides functionality to upgrade arbitrary ACPItables> via initrd. No functional change if no ACPI tables are passedvia> initrd, therefore it's safe to say Y. > - See Documentation/acpi/initrd_table_override.txt for details > + See Documentation/admin-guide/acpi/initrd_table_override.rst fordetails> > config ACPI_TABLE_OVERRIDE_VIA_BUILTIN_INITRD > bool "Override ACPI tables from built-in initrd" > @@ -365,7 +365,7 @@ config ACPI_TABLE_OVERRIDE_VIA_BUILTIN_INITRD > This option provides functionality to override arbitrary ACPItables> from built-in uncompressed initrd. > > - See Documentation/acpi/initrd_table_override.txt for details > + See Documentation/admin-guide/acpi/initrd_table_override.rst fordetails> > config ACPI_DEBUG > bool "Debug Statements" > @@ -374,7 +374,7 @@ config ACPI_DEBUG > output and increases the kernel size by around 50K. > > Use the acpi.debug_layer and acpi.debug_level kernel command-line> - parameters documented in Documentation/acpi/debug.txt and > + parameters documented in Documentation/firmware-guide/acpi/debug.rst and> Documentation/admin-guide/kernel-parameters.rst to control the type and > amount of debug output. > > @@ -445,7 +445,7 @@ config ACPI_CUSTOM_METHOD > help > This debug facility allows ACPI AML methods to be inserted and/or> replaced without rebooting the system. For details refer to: > - Documentation/acpi/method-customizing.txt. > + Documentation/firmware-guide/acpi/method-customizing.rst. > > NOTE: This option is security sensitive, because it allowsarbitrary> kernel memory to be written to by root (uid=0) users, allowingthem> diff --git a/drivers/net/ethernet/faraday/ftgmac100.c > b/drivers/net/ethernet/faraday/ftgmac100.c index b17b79e612a3..ac6280ad43a1 > 100644 > --- a/drivers/net/ethernet/faraday/ftgmac100.c > +++ b/drivers/net/ethernet/faraday/ftgmac100.c > @@ -1075,7 +1075,7 @@ static int ftgmac100_mii_probe(struct ftgmac100 *priv, > phy_interface_t intf) } > > /* Indicate that we support PAUSE frames (see comment in > - * Documentation/networking/phy.txt) > + * Documentation/networking/phy.rst) > */ > phy_support_asym_pause(phydev); > > diff --git a/drivers/staging/fieldbus/Documentation/fieldbus_dev.txt > b/drivers/staging/fieldbus/Documentation/fieldbus_dev.txt index > 56af3f650fa3..89fb8e14676f 100644 > --- a/drivers/staging/fieldbus/Documentation/fieldbus_dev.txt > +++ b/drivers/staging/fieldbus/Documentation/fieldbus_dev.txt > @@ -54,8 +54,8 @@ a limited few common behaviours and properties. This > allows us to define a simple interface consisting of a character device and > a set of sysfs files: > > See: > -Documentation/ABI/testing/sysfs-class-fieldbus-dev > -Documentation/ABI/testing/fieldbus-dev-cdev > +drivers/staging/fieldbus/Documentation/ABI/sysfs-class-fieldbus-dev > +drivers/staging/fieldbus/Documentation/ABI/fieldbus-dev-cdev > > Note that this simple interface does not provide a way to modify adapter > configuration settings. It is therefore useful only for adapters that get > their diff --git a/drivers/vhost/vhost.c b/drivers/vhost/vhost.c > index 1e3ed41ae1f3..69938dbae2d0 100644 > --- a/drivers/vhost/vhost.c > +++ b/drivers/vhost/vhost.c > @@ -1694,7 +1694,7 @@ EXPORT_SYMBOL_GPL(vhost_dev_ioctl); > > /* TODO: This is really inefficient. We need something like get_user() > * (instruction directly accesses the data, with an exception table entry > - * returning -EFAULT). See Documentation/x86/exception-tables.txt. > + * returning -EFAULT). See Documentation/x86/exception-tables.rst. > */ > static int set_bit_to_user(int nr, void __user *addr) > { > diff --git a/include/acpi/acpi_drivers.h b/include/acpi/acpi_drivers.h > index de1804aeaf69..98e3db7a89cd 100644 > --- a/include/acpi/acpi_drivers.h > +++ b/include/acpi/acpi_drivers.h > @@ -25,7 +25,7 @@ > #define ACPI_MAX_STRING 80 > > /* > - * Please update drivers/acpi/debug.c and Documentation/acpi/debug.txt > + * Please update drivers/acpi/debug.c and > Documentation/firmware-guide/acpi/debug.rst * if you add to this list. > */ > #define ACPI_BUS_COMPONENT 0x00010000 > diff --git a/include/linux/fs_context.h b/include/linux/fs_context.h > index 1f966670c8dc..623eb58560b9 100644 > --- a/include/linux/fs_context.h > +++ b/include/linux/fs_context.h > @@ -85,7 +85,7 @@ struct fs_parameter { > * Superblock creation fills in ->root whereas reconfiguration begins with > this * already set. > * > - * See Documentation/filesystems/mounting.txt > + * See Documentation/filesystems/mount_api.txt > */ > struct fs_context { > const struct fs_context_operations *ops; > diff --git a/include/linux/lsm_hooks.h b/include/linux/lsm_hooks.h > index 47f58cfb6a19..df1318d85f7d 100644 > --- a/include/linux/lsm_hooks.h > +++ b/include/linux/lsm_hooks.h > @@ -77,7 +77,7 @@ > * state. This is called immediately after commit_creds(). > * > * Security hooks for mount using fs_context. > - * [See also Documentation/filesystems/mounting.txt] > + * [See also Documentation/filesystems/mount_api.txt] > * > * @fs_context_dup: > * Allocate and attach a security structure to sc->security. Thispointer> diff --git a/mm/Kconfig b/mm/Kconfig > index ee8d1f311858..6e5fb81bde4b 100644 > --- a/mm/Kconfig > +++ b/mm/Kconfig > @@ -165,7 +165,7 @@ config MEMORY_HOTPLUG_DEFAULT_ONLINE > onlining policy (/sys/devices/system/memory/auto_online_blocks)which> determines what happens to newly added memory regions. Policysetting> can always be changed at runtime. > - See Documentation/memory-hotplug.txt for more information. > + See Documentation/admin-guide/mm/memory-hotplug.rst for more > information. > > Say Y here if you want all hot-plugged memory blocks to appearin> 'online' state by default. > diff --git a/security/Kconfig b/security/Kconfig > index aeac3676dd4d..6d75ed71970c 100644 > --- a/security/Kconfig > +++ b/security/Kconfig > @@ -62,7 +62,7 @@ config PAGE_TABLE_ISOLATION > ensuring that the majority of kernel addresses are not mapped > into userspace. > > - See Documentation/x86/pti.txt for more details. > + See Documentation/x86/pti.rst for more details. > > config SECURITY_INFINIBAND > bool "Infiniband Security Hooks" > diff --git a/tools/include/linux/err.h b/tools/include/linux/err.h > index 2f5a12b88a86..25f2bb3a991d 100644 > --- a/tools/include/linux/err.h > +++ b/tools/include/linux/err.h > @@ -20,7 +20,7 @@ > * Userspace note: > * The same principle works for userspace, because 'error' pointers > * fall down to the unused hole far from user space, as described > - * in Documentation/x86/x86_64/mm.txt for x86_64 arch: > + * in Documentation/x86/x86_64/mm.rst for x86_64 arch: > * > * 0000000000000000 - 00007fffffffffff (=47 bits) user space, different per > mm hole caused by [48:63] sign extension * ffffffffffe00000 - > ffffffffffffffff (=2 MB) unused hole > diff --git a/tools/objtool/Documentation/stack-validation.txt > b/tools/objtool/Documentation/stack-validation.txt index > 4dd11a554b9b..de094670050b 100644 > --- a/tools/objtool/Documentation/stack-validation.txt > +++ b/tools/objtool/Documentation/stack-validation.txt > @@ -21,7 +21,7 @@ instructions). Similarly, it knows how to follow switch > statements, for which gcc sometimes uses jump tables. > > (Objtool also has an 'orc generate' subcommand which generates debuginfo > -for the ORC unwinder. See Documentation/x86/orc-unwinder.txt in the > +for the ORC unwinder. See Documentation/x86/orc-unwinder.rst in the > kernel tree for more details.) > > > @@ -101,7 +101,7 @@ b) ORC (Oops Rewind Capability) unwind table generation > band. So it doesn't affect runtime performance and it can be > reliable even when interrupts or exceptions are involved. > > - For more details, see Documentation/x86/orc-unwinder.txt. > + For more details, see Documentation/x86/orc-unwinder.rst. > > c) Higher live patching compatibility rate > > diff --git a/tools/testing/selftests/x86/protection_keys.c > b/tools/testing/selftests/x86/protection_keys.c index > 5d546dcdbc80..798a5ddeee55 100644 > --- a/tools/testing/selftests/x86/protection_keys.c > +++ b/tools/testing/selftests/x86/protection_keys.c > @@ -1,6 +1,6 @@ > // SPDX-License-Identifier: GPL-2.0 > /* > - * Tests x86 Memory Protection Keys (see > Documentation/x86/protection-keys.txt) + * Tests x86 Memory Protection Keys > (see Documentation/x86/protection-keys.rst) * > * There are examples in here of: > * * how to set protection keys on memory
Michael S. Tsirkin
2019-May-30 22:49 UTC
[PATCH 22/22] docs: fix broken documentation links
On Thu, May 30, 2019 at 10:17:32PM +0200, Federico Vaga wrote:> On Thursday, May 30, 2019 1:23:53 AM CEST Mauro Carvalho Chehab wrote: > > Mostly due to x86 and acpi conversion, several documentation > > links are still pointing to the old file. Fix them. > > For the Italian documentation I just send I patch to fix them in a dedicated > patchAcked-by: Michael S. Tsirkin <mst at redhat.com> for the vhost change.> > > > Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung at kernel.org> > > --- > > Documentation/acpi/dsd/leds.txt | 2 +- > > Documentation/admin-guide/kernel-parameters.rst | 6 +++--- > > Documentation/admin-guide/kernel-parameters.txt | 16 ++++++++-------- > > Documentation/admin-guide/ras.rst | 2 +- > > .../devicetree/bindings/net/fsl-enetc.txt | 7 +++---- > > .../bindings/pci/amlogic,meson-pcie.txt | 2 +- > > .../bindings/regulator/qcom,rpmh-regulator.txt | 2 +- > > Documentation/devicetree/booting-without-of.txt | 2 +- > > Documentation/driver-api/gpio/board.rst | 2 +- > > Documentation/driver-api/gpio/consumer.rst | 2 +- > > .../firmware-guide/acpi/enumeration.rst | 2 +- > > .../firmware-guide/acpi/method-tracing.rst | 2 +- > > Documentation/i2c/instantiating-devices | 2 +- > > Documentation/sysctl/kernel.txt | 4 ++-- > > .../translations/it_IT/process/howto.rst | 2 +- > > .../it_IT/process/stable-kernel-rules.rst | 4 ++-- > > .../translations/zh_CN/process/4.Coding.rst | 2 +- > > Documentation/x86/x86_64/5level-paging.rst | 2 +- > > Documentation/x86/x86_64/boot-options.rst | 4 ++-- > > .../x86/x86_64/fake-numa-for-cpusets.rst | 2 +- > > MAINTAINERS | 6 +++--- > > arch/arm/Kconfig | 2 +- > > arch/arm64/kernel/kexec_image.c | 2 +- > > arch/powerpc/Kconfig | 2 +- > > arch/x86/Kconfig | 16 ++++++++-------- > > arch/x86/Kconfig.debug | 2 +- > > arch/x86/boot/header.S | 2 +- > > arch/x86/entry/entry_64.S | 2 +- > > arch/x86/include/asm/bootparam_utils.h | 2 +- > > arch/x86/include/asm/page_64_types.h | 2 +- > > arch/x86/include/asm/pgtable_64_types.h | 2 +- > > arch/x86/kernel/cpu/microcode/amd.c | 2 +- > > arch/x86/kernel/kexec-bzimage64.c | 2 +- > > arch/x86/kernel/pci-dma.c | 2 +- > > arch/x86/mm/tlb.c | 2 +- > > arch/x86/platform/pvh/enlighten.c | 2 +- > > drivers/acpi/Kconfig | 10 +++++----- > > drivers/net/ethernet/faraday/ftgmac100.c | 2 +- > > .../fieldbus/Documentation/fieldbus_dev.txt | 4 ++-- > > drivers/vhost/vhost.c | 2 +- > > include/acpi/acpi_drivers.h | 2 +- > > include/linux/fs_context.h | 2 +- > > include/linux/lsm_hooks.h | 2 +- > > mm/Kconfig | 2 +- > > security/Kconfig | 2 +- > > tools/include/linux/err.h | 2 +- > > tools/objtool/Documentation/stack-validation.txt | 4 ++-- > > tools/testing/selftests/x86/protection_keys.c | 2 +- > > 48 files changed, 77 insertions(+), 78 deletions(-) > > > > diff --git a/Documentation/acpi/dsd/leds.txt > > b/Documentation/acpi/dsd/leds.txt index 81a63af42ed2..cc58b1a574c5 100644 > > --- a/Documentation/acpi/dsd/leds.txt > > +++ b/Documentation/acpi/dsd/leds.txt > > @@ -96,4 +96,4 @@ where > > > > <URL:http://www.uefi.org/sites/default/files/resources/_DSD-hierarchical-da > > ta-extension-UUID-v1.1.pdf>, referenced 2019-02-21. > > > > -[7] Documentation/acpi/dsd/data-node-reference.txt > > +[7] Documentation/firmware-guide/acpi/dsd/data-node-references.rst > > diff --git a/Documentation/admin-guide/kernel-parameters.rst > > b/Documentation/admin-guide/kernel-parameters.rst index > > 0124980dca2d..8d3273e32eb1 100644 > > --- a/Documentation/admin-guide/kernel-parameters.rst > > +++ b/Documentation/admin-guide/kernel-parameters.rst > > @@ -167,7 +167,7 @@ parameter is applicable:: > > X86-32 X86-32, aka i386 architecture is enabled. > > X86-64 X86-64 architecture is enabled. > > More X86-64 boot options can be found in > > - Documentation/x86/x86_64/boot-options.txt > . > > + Documentation/x86/x86_64/boot-options.rst. > > X86 Either 32-bit or 64-bit x86 (same as X86-32+X86-64) > > X86_UV SGI UV support is enabled. > > XEN Xen support is enabled > > @@ -181,10 +181,10 @@ In addition, the following text indicates that the > > option:: Parameters denoted with BOOT are actually interpreted by the boot > > loader, and have no meaning to the kernel directly. > > Do not modify the syntax of boot loader parameters without extreme > > -need or coordination with <Documentation/x86/boot.txt>. > > +need or coordination with <Documentation/x86/boot.rst>. > > > > There are also arch-specific kernel-parameters not documented here. > > -See for example <Documentation/x86/x86_64/boot-options.txt>. > > +See for example <Documentation/x86/x86_64/boot-options.rst>. > > > > Note that ALL kernel parameters listed below are CASE SENSITIVE, and that > > a trailing = on the name of any parameter states that that parameter will > > diff --git a/Documentation/admin-guide/kernel-parameters.txt > > b/Documentation/admin-guide/kernel-parameters.txt index > > 138f6664b2e2..4a02d1346635 100644 > > --- a/Documentation/admin-guide/kernel-parameters.txt > > +++ b/Documentation/admin-guide/kernel-parameters.txt > > @@ -53,7 +53,7 @@ > > ACPI_DEBUG_PRINT statements, e.g., > > ACPI_DEBUG_PRINT((ACPI_DB_INFO, ... > > The debug_level mask defaults to "info". > See > > - Documentation/acpi/debug.txt for more > information about > > + Documentation/firmware-guide/acpi/debug.rst > for more information about > > debug layers and levels. > > > > Enable processor driver info messages: > > @@ -963,7 +963,7 @@ > > for details. > > > > nompx [X86] Disables Intel Memory Protection > Extensions. > > - See Documentation/x86/intel_mpx.txt for > more > > + See Documentation/x86/intel_mpx.rst for > more > > information about the feature. > > > > nopku [X86] Disable Memory Protection Keys CPU > feature found > > @@ -1189,7 +1189,7 @@ > > that is to be dynamically loaded by Linux. > If there are > > multiple variables with the same name but > with different > > vendor GUIDs, all of them will be loaded. > See > > - Documentation/acpi/ssdt-overlays.txt for > details. > > + Documentation/admin-guide/acpi/ssdt- > overlays.rst for details. > > > > > > eisa_irq_edge= [PARISC,HW] > > @@ -2383,7 +2383,7 @@ > > > > mce [X86-32] Machine Check Exception > > > > - mce=option [X86-64] See Documentation/x86/x86_64/boot- > options.txt > > + mce=option [X86-64] See Documentation/x86/x86_64/boot- > options.rst > > > > md= [HW] RAID subsystems devices and level > > See Documentation/admin-guide/md.rst. > > @@ -2439,7 +2439,7 @@ > > set according to the > > CONFIG_MEMORY_HOTPLUG_DEFAULT_ONLINE > kernel config > > option. > > - See Documentation/memory-hotplug.txt. > > + See Documentation/admin-guide/mm/memory- > hotplug.rst. > > > > memmap=exactmap [KNL,X86] Enable setting of an exact > > E820 memory map, as specified by the user. > > @@ -2528,7 +2528,7 @@ > > mem_encrypt=on: Activate > SME > > mem_encrypt=off: Do not activate SME > > > > - Refer to Documentation/x86/amd-memory- > encryption.txt > > + Refer to Documentation/virtual/kvm/amd- > memory-encryption.rst > > for details on when memory encryption can > be activated. > > > > mem_sleep_default= [SUSPEND] Default system suspend mode: > > @@ -3528,7 +3528,7 @@ > > See Documentation/blockdev/paride.txt. > > > > pirq= [SMP,APIC] Manual mp-table setup > > - See Documentation/x86/i386/IO-APIC.txt. > > + See Documentation/x86/i386/IO-APIC.rst. > > > > plip= [PPT,NET] Parallel port network link > > Format: { parport<nr> | timid | 0 } > > @@ -5054,7 +5054,7 @@ > > Can be used multiple times for multiple > devices. > > > > vga= [BOOT,X86-32] Select a particular video > mode > > - See Documentation/x86/boot.txt and > > + See Documentation/x86/boot.rst and > > Documentation/svga.txt. > > Use vga=ask for menu. > > This is actually a boot loader parameter; > the value is > > diff --git a/Documentation/admin-guide/ras.rst > > b/Documentation/admin-guide/ras.rst index c7495e42e6f4..2b20f5f7380d 100644 > > --- a/Documentation/admin-guide/ras.rst > > +++ b/Documentation/admin-guide/ras.rst > > @@ -199,7 +199,7 @@ Architecture (MCA)\ [#f3]_. > > mode). > > > > .. [#f3] For more details about the Machine Check Architecture (MCA), > > - please read Documentation/x86/x86_64/machinecheck at the Kernel tree. > > + please read Documentation/x86/x86_64/machinecheck.rst at the Kernel tree. > > > > EDAC - Error Detection And Correction > > ************************************* > > diff --git a/Documentation/devicetree/bindings/net/fsl-enetc.txt > > b/Documentation/devicetree/bindings/net/fsl-enetc.txt index > > c812e25ae90f..25fc687419db 100644 > > --- a/Documentation/devicetree/bindings/net/fsl-enetc.txt > > +++ b/Documentation/devicetree/bindings/net/fsl-enetc.txt > > @@ -16,8 +16,8 @@ Required properties: > > In this case, the ENETC node should include a "mdio" sub-node > > that in turn should contain the "ethernet-phy" node describing the > > external phy. Below properties are required, their bindings > > -already defined in ethernet.txt or phy.txt, under > > -Documentation/devicetree/bindings/net/*. > > +already defined in Documentation/devicetree/bindings/net/ethernet.txt or > > +Documentation/devicetree/bindings/net/phy.txt. > > > > Required: > > > > @@ -51,8 +51,7 @@ Example: > > connection: > > > > In this case, the ENETC port node defines a fixed link connection, > > -as specified by "fixed-link.txt", under > > -Documentation/devicetree/bindings/net/*. > > +as specified by Documentation/devicetree/bindings/net/fixed-link.txt. > > > > Required: > > > > diff --git a/Documentation/devicetree/bindings/pci/amlogic,meson-pcie.txt > > b/Documentation/devicetree/bindings/pci/amlogic,meson-pcie.txt index > > 12b18f82d441..efa2c8b9b85a 100644 > > --- a/Documentation/devicetree/bindings/pci/amlogic,meson-pcie.txt > > +++ b/Documentation/devicetree/bindings/pci/amlogic,meson-pcie.txt > > @@ -3,7 +3,7 @@ Amlogic Meson AXG DWC PCIE SoC controller > > Amlogic Meson PCIe host controller is based on the Synopsys DesignWare PCI > > core. It shares common functions with the PCIe DesignWare core driver and > > inherits common properties defined in > > -Documentation/devicetree/bindings/pci/designware-pci.txt. > > +Documentation/devicetree/bindings/pci/designware-pcie.txt. > > > > Additional properties are described here: > > > > diff --git > > a/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.txt > > b/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.txt index > > 7ef2dbe48e8a..14d2eee96b3d 100644 > > --- a/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.txt > > +++ b/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.txt > > @@ -97,7 +97,7 @@ Second Level Nodes - Regulators > > sent for this regulator including those which are > for a > > strictly lower power state. > > > > -Other properties defined in Documentation/devicetree/bindings/regulator.txt > > +Other properties defined in > > Documentation/devicetree/bindings/regulator/regulator.txt may also be used. > > regulator-initial-mode and regulator-allowed-modes may be specified for > > VRM regulators using mode values from > > include/dt-bindings/regulator/qcom,rpmh-regulator.h. > > regulator-allow-bypass diff --git > > a/Documentation/devicetree/booting-without-of.txt > > b/Documentation/devicetree/booting-without-of.txt index > > e86bd2f64117..60f8640f2b2f 100644 > > --- a/Documentation/devicetree/booting-without-of.txt > > +++ b/Documentation/devicetree/booting-without-of.txt > > @@ -277,7 +277,7 @@ it with special cases. > > the decompressor (the real mode entry point goes to the same 32bit > > entry point once it switched into protected mode). That entry point > > supports one calling convention which is documented in > > - Documentation/x86/boot.txt > > + Documentation/x86/boot.rst > > The physical pointer to the device-tree block (defined in chapter II) > > is passed via setup_data which requires at least boot protocol 2.09. > > The type filed is defined as > > diff --git a/Documentation/driver-api/gpio/board.rst > > b/Documentation/driver-api/gpio/board.rst index b37f3f7b8926..ce91518bf9f4 > > 100644 > > --- a/Documentation/driver-api/gpio/board.rst > > +++ b/Documentation/driver-api/gpio/board.rst > > @@ -101,7 +101,7 @@ with the help of _DSD (Device Specific Data), introduced > > in ACPI 5.1:: } > > > > For more information about the ACPI GPIO bindings see > > -Documentation/acpi/gpio-properties.txt. > > +Documentation/firmware-guide/acpi/gpio-properties.rst. > > > > Platform Data > > ------------- > > diff --git a/Documentation/driver-api/gpio/consumer.rst > > b/Documentation/driver-api/gpio/consumer.rst index > > 5e4d8aa68913..fdecb6d711db 100644 > > --- a/Documentation/driver-api/gpio/consumer.rst > > +++ b/Documentation/driver-api/gpio/consumer.rst > > @@ -437,7 +437,7 @@ case, it will be handled by the GPIO subsystem > > automatically. However, if the _DSD is not present, the mappings between > > GpioIo()/GpioInt() resources and GPIO connection IDs need to be provided by > > device drivers. > > > > -For details refer to Documentation/acpi/gpio-properties.txt > > +For details refer to Documentation/firmware-guide/acpi/gpio-properties.rst > > > > > > Interacting With the Legacy GPIO Subsystem > > diff --git a/Documentation/firmware-guide/acpi/enumeration.rst > > b/Documentation/firmware-guide/acpi/enumeration.rst index > > 850be9696931..1252617b520f 100644 > > --- a/Documentation/firmware-guide/acpi/enumeration.rst > > +++ b/Documentation/firmware-guide/acpi/enumeration.rst > > @@ -339,7 +339,7 @@ a code like this:: > > There are also devm_* versions of these functions which release the > > descriptors once the device is released. > > > > -See Documentation/acpi/gpio-properties.txt for more information about the > > +See Documentation/firmware-guide/acpi/gpio-properties.rst for more > > information about the _DSD binding related to GPIOs. > > > > MFD devices > > diff --git a/Documentation/firmware-guide/acpi/method-tracing.rst > > b/Documentation/firmware-guide/acpi/method-tracing.rst index > > d0b077b73f5f..0aa7e2c5d32a 100644 > > --- a/Documentation/firmware-guide/acpi/method-tracing.rst > > +++ b/Documentation/firmware-guide/acpi/method-tracing.rst > > @@ -68,7 +68,7 @@ c. Filter out the debug layer/level matched logs when the > > specified > > > > Where: > > 0xXXXXXXXX/0xYYYYYYYY > > - Refer to Documentation/acpi/debug.txt for possible debug layer/level > > + Refer to Documentation/firmware-guide/acpi/debug.rst for possible > > debug layer/level masking values. > > \PPPP.AAAA.TTTT.HHHH > > Full path of a control method that can be found in the ACPI namespace. > > diff --git a/Documentation/i2c/instantiating-devices > > b/Documentation/i2c/instantiating-devices index 0d85ac1935b7..5a3e2f331e8c > > 100644 > > --- a/Documentation/i2c/instantiating-devices > > +++ b/Documentation/i2c/instantiating-devices > > @@ -85,7 +85,7 @@ Method 1c: Declare the I2C devices via ACPI > > ------------------------------------------- > > > > ACPI can also describe I2C devices. There is special documentation for this > > -which is currently located at Documentation/acpi/enumeration.txt. +which > > is currently located at Documentation/firmware-guide/acpi/enumeration.rst. > > > > > > Method 2: Instantiate the devices explicitly > > diff --git a/Documentation/sysctl/kernel.txt > > b/Documentation/sysctl/kernel.txt index f0c86fbb3b48..92f7f34b021a 100644 > > --- a/Documentation/sysctl/kernel.txt > > +++ b/Documentation/sysctl/kernel.txt > > @@ -155,7 +155,7 @@ is 0x15 and the full version number is 0x234, this file > > will contain the value 340 = 0x154. > > > > See the type_of_loader and ext_loader_type fields in > > -Documentation/x86/boot.txt for additional information. > > +Documentation/x86/boot.rst for additional information. > > > > =============================================================> > > > @@ -167,7 +167,7 @@ The complete bootloader version number. In the example > > above, this file will contain the value 564 = 0x234. > > > > See the type_of_loader and ext_loader_ver fields in > > -Documentation/x86/boot.txt for additional information. > > +Documentation/x86/boot.rst for additional information. > > > > =============================================================> > > > diff --git a/Documentation/translations/it_IT/process/howto.rst > > b/Documentation/translations/it_IT/process/howto.rst index > > 9903ac7c566b..44e6077730e8 100644 > > --- a/Documentation/translations/it_IT/process/howto.rst > > +++ b/Documentation/translations/it_IT/process/howto.rst > > @@ -131,7 +131,7 @@ Di seguito una lista di file che sono presenti nei > > sorgente del kernel e che "Linux kernel patch submission format" > > http://linux.yyz.us/patch-format.html > > > > - :ref:`Documentation/process/translations/it_IT/stable-api-nonsense.rst > > <it_stable_api_nonsense>` + > > :ref:`Documentation/translations/it_IT/process/stable-api-nonsense.rst > > <it_stable_api_nonsense>` > > > > Questo file descrive la motivazioni sottostanti la conscia decisione di > > non avere un API stabile all'interno del kernel, incluso cose come: diff > > --git a/Documentation/translations/it_IT/process/stable-kernel-rules.rst > > b/Documentation/translations/it_IT/process/stable-kernel-rules.rst index > > 48e88e5ad2c5..4f206cee31a7 100644 > > --- a/Documentation/translations/it_IT/process/stable-kernel-rules.rst > > +++ b/Documentation/translations/it_IT/process/stable-kernel-rules.rst > > @@ -33,7 +33,7 @@ Regole sul tipo di patch che vengono o non vengono > > accettate nei sorgenti - Non deve includere alcuna correzione "banale" > > (correzioni grammaticali, pulizia dagli spazi bianchi, eccetera). > > - Deve rispettare le regole scritte in > > - :ref:`Documentation/translation/it_IT/process/submitting-patches.rst > > <it_submittingpatches>` + > > :ref:`Documentation/translations/it_IT/process/submitting-patches.rst > > <it_submittingpatches>` - Questa patch o una equivalente deve esistere gi? > > nei sorgenti principali di Linux > > > > @@ -43,7 +43,7 @@ Procedura per sottomettere patch per i sorgenti -stable > > > > - Se la patch contiene modifiche a dei file nelle cartelle net/ o > > drivers/net, allora seguite le linee guida descritte in > > - :ref:`Documentation/translation/it_IT/networking/netdev-FAQ.rst > > <it_netdev-FAQ>`; + > > :ref:`Documentation/translations/it_IT/networking/netdev-FAQ.rst > > <it_netdev-FAQ>`; ma solo dopo aver verificato al seguente indirizzo che la > > patch non sia gi? in coda: > > > > https://patchwork.ozlabs.org/bundle/davem/stable/?series=&submitter=&state> > *&q=&archive= diff --git > > a/Documentation/translations/zh_CN/process/4.Coding.rst > > b/Documentation/translations/zh_CN/process/4.Coding.rst index > > 5301e9d55255..8bb777941394 100644 > > --- a/Documentation/translations/zh_CN/process/4.Coding.rst > > +++ b/Documentation/translations/zh_CN/process/4.Coding.rst > > @@ -241,7 +241,7 @@ scripts/coccinelle???????????????????? > > > > ???????????????????sysfs?/proc???????????? > > ?????????????????????????????? > > -Documentation/abi/readme?????????????????????? > > +Documentation/ABI/README?????????????????????? > > > > ?? :ref:`Documentation/admin-guide/kernel-parameters.rst > > <kernelparameters>` ????????????????????????????????????? > > diff --git a/Documentation/x86/x86_64/5level-paging.rst > > b/Documentation/x86/x86_64/5level-paging.rst index > > ab88a4514163..44856417e6a5 100644 > > --- a/Documentation/x86/x86_64/5level-paging.rst > > +++ b/Documentation/x86/x86_64/5level-paging.rst > > @@ -20,7 +20,7 @@ physical address space. This "ought to be enough for > > anybody" ?. QEMU 2.9 and later support 5-level paging. > > > > Virtual memory layout for 5-level paging is described in > > -Documentation/x86/x86_64/mm.txt > > +Documentation/x86/x86_64/mm.rst > > > > > > Enabling 5-level paging > > diff --git a/Documentation/x86/x86_64/boot-options.rst > > b/Documentation/x86/x86_64/boot-options.rst index > > 2f69836b8445..6a4285a3c7a4 100644 > > --- a/Documentation/x86/x86_64/boot-options.rst > > +++ b/Documentation/x86/x86_64/boot-options.rst > > @@ -9,7 +9,7 @@ only the AMD64 specific ones are listed here. > > > > Machine check > > ============> > -Please see Documentation/x86/x86_64/machinecheck for sysfs runtime > > tunables. +Please see Documentation/x86/x86_64/machinecheck.rst for sysfs > > runtime tunables. > > > > mce=off > > Disable machine check > > @@ -89,7 +89,7 @@ APICs > > Don't use the local APIC (alias for i386 compatibility) > > > > pirq=... > > - See Documentation/x86/i386/IO-APIC.txt > > + See Documentation/x86/i386/IO-APIC.rst > > > > noapictimer > > Don't set up the APIC timer > > diff --git a/Documentation/x86/x86_64/fake-numa-for-cpusets.rst > > b/Documentation/x86/x86_64/fake-numa-for-cpusets.rst index > > 74fbb78b3c67..04df57b9aa3f 100644 > > --- a/Documentation/x86/x86_64/fake-numa-for-cpusets.rst > > +++ b/Documentation/x86/x86_64/fake-numa-for-cpusets.rst > > @@ -18,7 +18,7 @@ For more information on the features of cpusets, see > > Documentation/cgroup-v1/cpusets.txt. > > There are a number of different configurations you can use for your needs. > > For more information on the numa=fake command line option and its various > > ways of -configuring fake nodes, see > > Documentation/x86/x86_64/boot-options.txt. +configuring fake nodes, see > > Documentation/x86/x86_64/boot-options.rst. > > > > For the purposes of this introduction, we'll assume a very primitive NUMA > > emulation setup of "numa=fake=4*512,". This will split our system memory > > into diff --git a/MAINTAINERS b/MAINTAINERS > > index 5cfbea4ce575..a38d7273705a 100644 > > --- a/MAINTAINERS > > +++ b/MAINTAINERS > > @@ -3874,7 +3874,7 @@ > > F: Documentation/devicetree/bindings/hwmon/cirrus,lochnagar.txt > > F: Documentation/devicetree/bindings/pinctrl/cirrus,lochnagar.txt > > F: Documentation/devicetree/bindings/regulator/cirrus,lochnagar.txt > > F: Documentation/devicetree/bindings/sound/cirrus,lochnagar.txt > > -F: Documentation/hwmon/lochnagar > > +F: Documentation/hwmon/lochnagar.rst > > > > CISCO FCOE HBA DRIVER > > M: Satish Kharat <satishkh at cisco.com> > > @@ -11272,7 +11272,7 @@ NXP FXAS21002C DRIVER > > M: Rui Miguel Silva <rmfrfs at gmail.com> > > L: linux-iio at vger.kernel.org > > S: Maintained > > -F: Documentation/devicetree/bindings/iio/gyroscope/fxas21002c.txt > > +F: Documentation/devicetree/bindings/iio/gyroscope/nxp,fxas21002c.txt > > F: drivers/iio/gyro/fxas21002c_core.c > > F: drivers/iio/gyro/fxas21002c.h > > F: drivers/iio/gyro/fxas21002c_i2c.c > > @@ -13043,7 +13043,7 @@ M: Niklas Cassel <niklas.cassel at linaro.org> > > L: netdev at vger.kernel.org > > S: Maintained > > F: drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c > > -F: Documentation/devicetree/bindings/net/qcom,dwmac.txt > > +F: Documentation/devicetree/bindings/net/qcom,ethqos.txt > > > > QUALCOMM GENERIC INTERFACE I2C DRIVER > > M: Alok Chauhan <alokc at codeaurora.org> > > diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig > > index 8869742a85df..0f220264cc23 100644 > > --- a/arch/arm/Kconfig > > +++ b/arch/arm/Kconfig > > @@ -1263,7 +1263,7 @@ config SMP > > uniprocessor machines. On a uniprocessor machine, the kernel > > will run faster if you say N here. > > > > - See also <file:Documentation/x86/i386/IO-APIC.txt>, > > + See also <file:Documentation/x86/i386/IO-APIC.rst>, > > <file:Documentation/lockup-watchdogs.txt> and the SMP-HOWTO > available at > > <http://tldp.org/HOWTO/SMP-HOWTO.html>. > > > > diff --git a/arch/arm64/kernel/kexec_image.c > > b/arch/arm64/kernel/kexec_image.c index 07bf740bea91..31cc2f423aa8 100644 > > --- a/arch/arm64/kernel/kexec_image.c > > +++ b/arch/arm64/kernel/kexec_image.c > > @@ -53,7 +53,7 @@ static void *image_load(struct kimage *image, > > > > /* > > * We require a kernel with an unambiguous Image header. Per > > - * Documentation/booting.txt, this is the case when image_size > > + * Documentation/arm64/booting.txt, this is the case when > image_size > > * is non-zero (practically speaking, since v3.17). > > */ > > h = (struct arm64_image_header *)kernel; > > diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig > > index 8c1c636308c8..e868d2bd48b8 100644 > > --- a/arch/powerpc/Kconfig > > +++ b/arch/powerpc/Kconfig > > @@ -898,7 +898,7 @@ config PPC_MEM_KEYS > > page-based protections, but without requiring modification of > the > > page tables when an application changes protection domains. > > > > - For details, see Documentation/vm/protection-keys.rst > > + For details, see Documentation/x86/protection-keys.rst > > > > If unsure, say y. > > > > diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig > > index 2bbbd4d1ba31..78fdf2dd71d1 100644 > > --- a/arch/x86/Kconfig > > +++ b/arch/x86/Kconfig > > @@ -395,7 +395,7 @@ config SMP > > Y to "Enhanced Real Time Clock Support", below. The "Advanced > Power > > Management" code will be disabled if you say Y here. > > > > - See also <file:Documentation/x86/i386/IO-APIC.txt>, > > + See also <file:Documentation/x86/i386/IO-APIC.rst>, > > <file:Documentation/lockup-watchdogs.txt> and the SMP-HOWTO > available at > > <http://www.tldp.org/docs.html#howto>. > > > > @@ -1290,7 +1290,7 @@ config MICROCODE > > the Linux kernel. > > > > The preferred method to load microcode from a detached initrd is > > described - in Documentation/x86/microcode.txt. For that you > need to > > enable + in Documentation/x86/microcode.rst. For that you need to enable > > CONFIG_BLK_DEV_INITRD in order for the loader to be able to scan the initrd > > for microcode blobs. > > > > @@ -1329,7 +1329,7 @@ config MICROCODE_OLD_INTERFACE > > It is inadequate because it runs too late to be able to properly > > load microcode on a machine and it needs special tools. Instead, > you > > should've switched to the early loading method with the initrd > or > > - builtin microcode by now: Documentation/x86/microcode.txt > > + builtin microcode by now: Documentation/x86/microcode.rst > > > > config X86_MSR > > tristate "/dev/cpu/*/msr - Model-specific register support" > > @@ -1478,7 +1478,7 @@ config X86_5LEVEL > > A kernel with the option enabled can be booted on machines that > > support 4- or 5-level paging. > > > > - See Documentation/x86/x86_64/5level-paging.txt for more > > + See Documentation/x86/x86_64/5level-paging.rst for more > > information. > > > > Say N if unsure. > > @@ -1626,7 +1626,7 @@ config ARCH_MEMORY_PROBE > > depends on X86_64 && MEMORY_HOTPLUG > > help > > This option enables a sysfs memory/probe interface for testing. > > - See Documentation/memory-hotplug.txt for more information. > > + See Documentation/admin-guide/mm/memory-hotplug.rst for more > > information. If you are unsure how to answer this question, answer N. > > > > config ARCH_PROC_KCORE_TEXT > > @@ -1783,7 +1783,7 @@ config MTRR > > You can safely say Y even if your machine doesn't have MTRRs, > you'll > > just add about 9 KB to your kernel. > > > > - See <file:Documentation/x86/mtrr.txt> for more information. > > + See <file:Documentation/x86/mtrr.rst> for more information. > > > > config MTRR_SANITIZER > > def_bool y > > @@ -1895,7 +1895,7 @@ config X86_INTEL_MPX > > process and adds some branches to paths used during > > exec() and munmap(). > > > > - For details, see Documentation/x86/intel_mpx.txt > > + For details, see Documentation/x86/intel_mpx.rst > > > > If unsure, say N. > > > > @@ -1911,7 +1911,7 @@ config X86_INTEL_MEMORY_PROTECTION_KEYS > > page-based protections, but without requiring modification of > the > > page tables when an application changes protection domains. > > > > - For details, see Documentation/x86/protection-keys.txt > > + For details, see Documentation/x86/protection-keys.rst > > > > If unsure, say y. > > > > diff --git a/arch/x86/Kconfig.debug b/arch/x86/Kconfig.debug > > index f730680dc818..59f598543203 100644 > > --- a/arch/x86/Kconfig.debug > > +++ b/arch/x86/Kconfig.debug > > @@ -156,7 +156,7 @@ config IOMMU_DEBUG > > code. When you use it make sure you have a big enough > > IOMMU/AGP aperture. Most of the options enabled by this can > > be set more finegrained using the iommu= command line > > - options. See Documentation/x86/x86_64/boot-options.txt for more > > + options. See Documentation/x86/x86_64/boot-options.rst for more > > details. > > > > config IOMMU_LEAK > > diff --git a/arch/x86/boot/header.S b/arch/x86/boot/header.S > > index 850b8762e889..90d791ca1a95 100644 > > --- a/arch/x86/boot/header.S > > +++ b/arch/x86/boot/header.S > > @@ -313,7 +313,7 @@ start_sys_seg: .word SYSSEG > # obsolete and meaningless, > > but just > > > > type_of_loader: .byte 0 # 0 means ancient > bootloader, newer > > # bootloaders know > to change this. > > - # See > Documentation/x86/boot.txt for > > + # See > Documentation/x86/boot.rst for > > # assigned ids > > > > # flags, unused bits must be zero (RFU) bit within loadflags > > diff --git a/arch/x86/entry/entry_64.S b/arch/x86/entry/entry_64.S > > index 11aa3b2afa4d..33f9fc38d014 100644 > > --- a/arch/x86/entry/entry_64.S > > +++ b/arch/x86/entry/entry_64.S > > @@ -8,7 +8,7 @@ > > * > > * entry.S contains the system-call and fault low-level handling routines. > > * > > - * Some of this is documented in Documentation/x86/entry_64.txt > > + * Some of this is documented in Documentation/x86/entry_64.rst > > * > > * A note on terminology: > > * - iret frame: Architecture defined interrupt frame from SS to RIP > > diff --git a/arch/x86/include/asm/bootparam_utils.h > > b/arch/x86/include/asm/bootparam_utils.h index f6f6ef436599..101eb944f13c > > 100644 > > --- a/arch/x86/include/asm/bootparam_utils.h > > +++ b/arch/x86/include/asm/bootparam_utils.h > > @@ -24,7 +24,7 @@ static void sanitize_boot_params(struct boot_params > > *boot_params) * IMPORTANT NOTE TO BOOTLOADER AUTHORS: do not simply clear > > * this field. The purpose of this field is to guarantee > > * compliance with the x86 boot spec located in > > - * Documentation/x86/boot.txt . That spec says that the > > + * Documentation/x86/boot.rst . That spec says that the > > * *whole* structure should be cleared, after which only the > > * portion defined by struct setup_header (boot_params->hdr) > > * should be copied in. > > diff --git a/arch/x86/include/asm/page_64_types.h > > b/arch/x86/include/asm/page_64_types.h index 793c14c372cb..288b065955b7 > > 100644 > > --- a/arch/x86/include/asm/page_64_types.h > > +++ b/arch/x86/include/asm/page_64_types.h > > @@ -48,7 +48,7 @@ > > > > #define __START_KERNEL_map _AC(0xffffffff80000000, UL) > > > > -/* See Documentation/x86/x86_64/mm.txt for a description of the memory map. > > */ +/* See Documentation/x86/x86_64/mm.rst for a description of the memory > > map. */ > > > > #define __PHYSICAL_MASK_SHIFT 52 > > > > diff --git a/arch/x86/include/asm/pgtable_64_types.h > > b/arch/x86/include/asm/pgtable_64_types.h index 88bca456da99..52e5f5f2240d > > 100644 > > --- a/arch/x86/include/asm/pgtable_64_types.h > > +++ b/arch/x86/include/asm/pgtable_64_types.h > > @@ -103,7 +103,7 @@ extern unsigned int ptrs_per_p4d; > > #define PGDIR_MASK (~(PGDIR_SIZE - 1)) > > > > /* > > - * See Documentation/x86/x86_64/mm.txt for a description of the memory map. > > + * See Documentation/x86/x86_64/mm.rst for a description of the memory > > map. * > > * Be very careful vs. KASLR when changing anything here. The KASLR address > > * range must not overlap with anything except the KASAN shadow area, which > > diff --git a/arch/x86/kernel/cpu/microcode/amd.c > > b/arch/x86/kernel/cpu/microcode/amd.c index e1f3ba19ba54..06d4e67f31ab > > 100644 > > --- a/arch/x86/kernel/cpu/microcode/amd.c > > +++ b/arch/x86/kernel/cpu/microcode/amd.c > > @@ -61,7 +61,7 @@ static u8 amd_ucode_patch[PATCH_MAX_SIZE]; > > > > /* > > * Microcode patch container file is prepended to the initrd in cpio > > - * format. See Documentation/x86/microcode.txt > > + * format. See Documentation/x86/microcode.rst > > */ > > static const char > > ucode_path[] __maybe_unused = "kernel/x86/microcode/AuthenticAMD.bin"; > > diff --git a/arch/x86/kernel/kexec-bzimage64.c > > b/arch/x86/kernel/kexec-bzimage64.c index 22f60dd26460..b07e7069b09e 100644 > > --- a/arch/x86/kernel/kexec-bzimage64.c > > +++ b/arch/x86/kernel/kexec-bzimage64.c > > @@ -416,7 +416,7 @@ static void *bzImage64_load(struct kimage *image, char > > *kernel, efi_map_offset = params_cmdline_sz; > > efi_setup_data_offset = efi_map_offset + ALIGN(efi_map_sz, 16); > > > > - /* Copy setup header onto bootparams. Documentation/x86/boot.txt > */ > > + /* Copy setup header onto bootparams. Documentation/x86/boot.rst */ > > setup_header_size = 0x0202 + kernel[0x0201] - setup_hdr_offset; > > > > /* Is there a limit on setup header size? */ > > diff --git a/arch/x86/kernel/pci-dma.c b/arch/x86/kernel/pci-dma.c > > index dcd272dbd0a9..f62b498b18fb 100644 > > --- a/arch/x86/kernel/pci-dma.c > > +++ b/arch/x86/kernel/pci-dma.c > > @@ -70,7 +70,7 @@ void __init pci_iommu_alloc(void) > > } > > > > /* > > - * See <Documentation/x86/x86_64/boot-options.txt> for the iommu kernel > > + * See <Documentation/x86/x86_64/boot-options.rst> for the iommu kernel > > * parameter documentation. > > */ > > static __init int iommu_setup(char *p) > > diff --git a/arch/x86/mm/tlb.c b/arch/x86/mm/tlb.c > > index 7f61431c75fb..400c1ba033aa 100644 > > --- a/arch/x86/mm/tlb.c > > +++ b/arch/x86/mm/tlb.c > > @@ -711,7 +711,7 @@ void native_flush_tlb_others(const struct cpumask > > *cpumask, } > > > > /* > > - * See Documentation/x86/tlb.txt for details. We choose 33 > > + * See Documentation/x86/tlb.rst for details. We choose 33 > > * because it is large enough to cover the vast majority (at > > * least 95%) of allocations, and is small enough that we are > > * confident it will not cause too much overhead. Each single > > diff --git a/arch/x86/platform/pvh/enlighten.c > > b/arch/x86/platform/pvh/enlighten.c index 1861a2ba0f2b..c0a502f7e3a7 100644 > > --- a/arch/x86/platform/pvh/enlighten.c > > +++ b/arch/x86/platform/pvh/enlighten.c > > @@ -86,7 +86,7 @@ static void __init init_pvh_bootparams(bool xen_guest) > > } > > > > /* > > - * See Documentation/x86/boot.txt. > > + * See Documentation/x86/boot.rst. > > * > > * Version 2.12 supports Xen entry point but we will use default > x86/PC > > * environment (i.e. hardware_subarch 0). > > diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig > > index 283ee94224c6..2438f37f2ca1 100644 > > --- a/drivers/acpi/Kconfig > > +++ b/drivers/acpi/Kconfig > > @@ -333,7 +333,7 @@ config ACPI_CUSTOM_DSDT_FILE > > depends on !STANDALONE > > help > > This option supports a custom DSDT by linking it into the > kernel. > > - See Documentation/acpi/dsdt-override.txt > > + See Documentation/admin-guide/acpi/dsdt-override.rst > > > > Enter the full path name to the file which includes the AmlCode > > or dsdt_aml_code declaration. > > @@ -355,7 +355,7 @@ config ACPI_TABLE_UPGRADE > > This option provides functionality to upgrade arbitrary ACPI > tables > > via initrd. No functional change if no ACPI tables are passed > via > > initrd, therefore it's safe to say Y. > > - See Documentation/acpi/initrd_table_override.txt for details > > + See Documentation/admin-guide/acpi/initrd_table_override.rst for > details > > > > config ACPI_TABLE_OVERRIDE_VIA_BUILTIN_INITRD > > bool "Override ACPI tables from built-in initrd" > > @@ -365,7 +365,7 @@ config ACPI_TABLE_OVERRIDE_VIA_BUILTIN_INITRD > > This option provides functionality to override arbitrary ACPI > tables > > from built-in uncompressed initrd. > > > > - See Documentation/acpi/initrd_table_override.txt for details > > + See Documentation/admin-guide/acpi/initrd_table_override.rst for > details > > > > config ACPI_DEBUG > > bool "Debug Statements" > > @@ -374,7 +374,7 @@ config ACPI_DEBUG > > output and increases the kernel size by around 50K. > > > > Use the acpi.debug_layer and acpi.debug_level kernel command- > line > > - parameters documented in Documentation/acpi/debug.txt and > > + parameters documented in Documentation/firmware-guide/acpi/ > debug.rst and > > Documentation/admin-guide/kernel-parameters.rst to control the type and > > amount of debug output. > > > > @@ -445,7 +445,7 @@ config ACPI_CUSTOM_METHOD > > help > > This debug facility allows ACPI AML methods to be inserted and/ > or > > replaced without rebooting the system. For details refer to: > > - Documentation/acpi/method-customizing.txt. > > + Documentation/firmware-guide/acpi/method-customizing.rst. > > > > NOTE: This option is security sensitive, because it allows > arbitrary > > kernel memory to be written to by root (uid=0) users, allowing > them > > diff --git a/drivers/net/ethernet/faraday/ftgmac100.c > > b/drivers/net/ethernet/faraday/ftgmac100.c index b17b79e612a3..ac6280ad43a1 > > 100644 > > --- a/drivers/net/ethernet/faraday/ftgmac100.c > > +++ b/drivers/net/ethernet/faraday/ftgmac100.c > > @@ -1075,7 +1075,7 @@ static int ftgmac100_mii_probe(struct ftgmac100 *priv, > > phy_interface_t intf) } > > > > /* Indicate that we support PAUSE frames (see comment in > > - * Documentation/networking/phy.txt) > > + * Documentation/networking/phy.rst) > > */ > > phy_support_asym_pause(phydev); > > > > diff --git a/drivers/staging/fieldbus/Documentation/fieldbus_dev.txt > > b/drivers/staging/fieldbus/Documentation/fieldbus_dev.txt index > > 56af3f650fa3..89fb8e14676f 100644 > > --- a/drivers/staging/fieldbus/Documentation/fieldbus_dev.txt > > +++ b/drivers/staging/fieldbus/Documentation/fieldbus_dev.txt > > @@ -54,8 +54,8 @@ a limited few common behaviours and properties. This > > allows us to define a simple interface consisting of a character device and > > a set of sysfs files: > > > > See: > > -Documentation/ABI/testing/sysfs-class-fieldbus-dev > > -Documentation/ABI/testing/fieldbus-dev-cdev > > +drivers/staging/fieldbus/Documentation/ABI/sysfs-class-fieldbus-dev > > +drivers/staging/fieldbus/Documentation/ABI/fieldbus-dev-cdev > > > > Note that this simple interface does not provide a way to modify adapter > > configuration settings. It is therefore useful only for adapters that get > > their diff --git a/drivers/vhost/vhost.c b/drivers/vhost/vhost.c > > index 1e3ed41ae1f3..69938dbae2d0 100644 > > --- a/drivers/vhost/vhost.c > > +++ b/drivers/vhost/vhost.c > > @@ -1694,7 +1694,7 @@ EXPORT_SYMBOL_GPL(vhost_dev_ioctl); > > > > /* TODO: This is really inefficient. We need something like get_user() > > * (instruction directly accesses the data, with an exception table entry > > - * returning -EFAULT). See Documentation/x86/exception-tables.txt. > > + * returning -EFAULT). See Documentation/x86/exception-tables.rst. > > */ > > static int set_bit_to_user(int nr, void __user *addr) > > { > > diff --git a/include/acpi/acpi_drivers.h b/include/acpi/acpi_drivers.h > > index de1804aeaf69..98e3db7a89cd 100644 > > --- a/include/acpi/acpi_drivers.h > > +++ b/include/acpi/acpi_drivers.h > > @@ -25,7 +25,7 @@ > > #define ACPI_MAX_STRING 80 > > > > /* > > - * Please update drivers/acpi/debug.c and Documentation/acpi/debug.txt > > + * Please update drivers/acpi/debug.c and > > Documentation/firmware-guide/acpi/debug.rst * if you add to this list. > > */ > > #define ACPI_BUS_COMPONENT 0x00010000 > > diff --git a/include/linux/fs_context.h b/include/linux/fs_context.h > > index 1f966670c8dc..623eb58560b9 100644 > > --- a/include/linux/fs_context.h > > +++ b/include/linux/fs_context.h > > @@ -85,7 +85,7 @@ struct fs_parameter { > > * Superblock creation fills in ->root whereas reconfiguration begins with > > this * already set. > > * > > - * See Documentation/filesystems/mounting.txt > > + * See Documentation/filesystems/mount_api.txt > > */ > > struct fs_context { > > const struct fs_context_operations *ops; > > diff --git a/include/linux/lsm_hooks.h b/include/linux/lsm_hooks.h > > index 47f58cfb6a19..df1318d85f7d 100644 > > --- a/include/linux/lsm_hooks.h > > +++ b/include/linux/lsm_hooks.h > > @@ -77,7 +77,7 @@ > > * state. This is called immediately after commit_creds(). > > * > > * Security hooks for mount using fs_context. > > - * [See also Documentation/filesystems/mounting.txt] > > + * [See also Documentation/filesystems/mount_api.txt] > > * > > * @fs_context_dup: > > * Allocate and attach a security structure to sc->security. This > pointer > > diff --git a/mm/Kconfig b/mm/Kconfig > > index ee8d1f311858..6e5fb81bde4b 100644 > > --- a/mm/Kconfig > > +++ b/mm/Kconfig > > @@ -165,7 +165,7 @@ config MEMORY_HOTPLUG_DEFAULT_ONLINE > > onlining policy (/sys/devices/system/memory/auto_online_blocks) > which > > determines what happens to newly added memory regions. Policy > setting > > can always be changed at runtime. > > - See Documentation/memory-hotplug.txt for more information. > > + See Documentation/admin-guide/mm/memory-hotplug.rst for more > > information. > > > > Say Y here if you want all hot-plugged memory blocks to appear > in > > 'online' state by default. > > diff --git a/security/Kconfig b/security/Kconfig > > index aeac3676dd4d..6d75ed71970c 100644 > > --- a/security/Kconfig > > +++ b/security/Kconfig > > @@ -62,7 +62,7 @@ config PAGE_TABLE_ISOLATION > > ensuring that the majority of kernel addresses are not mapped > > into userspace. > > > > - See Documentation/x86/pti.txt for more details. > > + See Documentation/x86/pti.rst for more details. > > > > config SECURITY_INFINIBAND > > bool "Infiniband Security Hooks" > > diff --git a/tools/include/linux/err.h b/tools/include/linux/err.h > > index 2f5a12b88a86..25f2bb3a991d 100644 > > --- a/tools/include/linux/err.h > > +++ b/tools/include/linux/err.h > > @@ -20,7 +20,7 @@ > > * Userspace note: > > * The same principle works for userspace, because 'error' pointers > > * fall down to the unused hole far from user space, as described > > - * in Documentation/x86/x86_64/mm.txt for x86_64 arch: > > + * in Documentation/x86/x86_64/mm.rst for x86_64 arch: > > * > > * 0000000000000000 - 00007fffffffffff (=47 bits) user space, different per > > mm hole caused by [48:63] sign extension * ffffffffffe00000 - > > ffffffffffffffff (=2 MB) unused hole > > diff --git a/tools/objtool/Documentation/stack-validation.txt > > b/tools/objtool/Documentation/stack-validation.txt index > > 4dd11a554b9b..de094670050b 100644 > > --- a/tools/objtool/Documentation/stack-validation.txt > > +++ b/tools/objtool/Documentation/stack-validation.txt > > @@ -21,7 +21,7 @@ instructions). Similarly, it knows how to follow switch > > statements, for which gcc sometimes uses jump tables. > > > > (Objtool also has an 'orc generate' subcommand which generates debuginfo > > -for the ORC unwinder. See Documentation/x86/orc-unwinder.txt in the > > +for the ORC unwinder. See Documentation/x86/orc-unwinder.rst in the > > kernel tree for more details.) > > > > > > @@ -101,7 +101,7 @@ b) ORC (Oops Rewind Capability) unwind table generation > > band. So it doesn't affect runtime performance and it can be > > reliable even when interrupts or exceptions are involved. > > > > - For more details, see Documentation/x86/orc-unwinder.txt. > > + For more details, see Documentation/x86/orc-unwinder.rst. > > > > c) Higher live patching compatibility rate > > > > diff --git a/tools/testing/selftests/x86/protection_keys.c > > b/tools/testing/selftests/x86/protection_keys.c index > > 5d546dcdbc80..798a5ddeee55 100644 > > --- a/tools/testing/selftests/x86/protection_keys.c > > +++ b/tools/testing/selftests/x86/protection_keys.c > > @@ -1,6 +1,6 @@ > > // SPDX-License-Identifier: GPL-2.0 > > /* > > - * Tests x86 Memory Protection Keys (see > > Documentation/x86/protection-keys.txt) + * Tests x86 Memory Protection Keys > > (see Documentation/x86/protection-keys.rst) * > > * There are examples in here of: > > * * how to set protection keys on memory > > >
Seemingly Similar Threads
- [PATCH 22/22] docs: fix broken documentation links
- [PATCH 22/22] docs: fix broken documentation links
- [PATCH 22/22] docs: fix broken documentation links
- [PATCH 10/10] docs: fix broken documentation links
- [PATCH v2 19/22] docs: fix broken documentation links