Linux Virtualization - Nov 2016 - [RFC LINUX PATCH 0/2] Virtio ring works with DMA coherent memory

RPMsg uses dma_alloc_coherent() to allocate memory to shared with the remote.
In this case, as there is no pages setup in the dma_alloc_coherent(),
we cannot get the physical address back from the virtual address, and thus,
we can set the sg_dma_addr to store the DMA address and mark it already DMA
mapped.

When virtio vring sees the sg_dma_addr is ready set, do not call dma_map_page().

The issue was once discussed here:
http://virtualization.linux-foundation.narkive.com/CfVP32Vy/rfc-0-4-rpmsg-fix-init-of-dma-able-virtqueues

Edgar E. Iglesias (1):
  rpmsg: DMA map sgs passed to virtio

Wendy Liang (1):
  virtio_ring: Do not call dma_map_page if sg is already mapped.

 drivers/rpmsg/virtio_rpmsg_bus.c | 22 +++++++++++++++++++---
 drivers/virtio/virtio_ring.c     |  6 ++++++
 2 files changed, 25 insertions(+), 3 deletions(-)

-- 
1.9.1

If sg is already dma mapped, do not call dma_map_page() in
vring_map_one_sg().

In case of rpmsg, rpmsg uses dma_alloc_coherent() to allocate
memory to share with the remote. There is no pages setup
in dma_alloc_coherent().

In this case, we cannot convert the virtual address back to the
physical address. In this case, we can setup the sg_dma_addr to
store the DMA address, and also mark the sg is already mapped.

In the vring, we can detect if the address is already mapped
by checking the sg_dma_addr. If yes, do not call dma_map_page().

Signed-off-by: Wendy Liang <jliang at xilinx.com>
---
 drivers/virtio/virtio_ring.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/virtio/virtio_ring.c b/drivers/virtio/virtio_ring.c
index 489bfc6..9793e1f 100644
--- a/drivers/virtio/virtio_ring.c
+++ b/drivers/virtio/virtio_ring.c
@@ -180,6 +180,12 @@ static dma_addr_t vring_map_one_sg(const struct
vring_virtqueue *vq,
 	if (!vring_use_dma_api(vq->vq.vdev))
 		return (dma_addr_t)sg_phys(sg);
 
+	/* If the sg is already mapped, return the DMA address */
+	if (sg_dma_address(sg)) {
+		sg->length = sg_dma_len(sg);
+		return sg_dma_address(sg);
+	}
+
 	/*
 	 * We can't use dma_map_sg, because we don't use scatterlists in
 	 * the way it expects (we don't guarantee that the scatterlist
-- 
1.9.1

From: "Edgar E. Iglesias" <edgar.iglesias at xilinx.com>

As rpmsg uses dma_alloc_coherent() to allocate memory to shared
with the remote. Virtio ring requires the shared buffers to be
passed as sg struct. As the memory has already been mapped,
and we cannot convert the virtual address got from dma_alloc_coherent()
back to the physical address. We set the sg_dma_addr to store the
DMA address before we pass it to virtio.

Signed-off-by: Edgar E. Iglesias <edgar.iglesias at xilinx.com>
Signed-off-by: Wendy Liang <jliang at xilinx.com>
---
 drivers/rpmsg/virtio_rpmsg_bus.c | 22 +++++++++++++++++++---
 1 file changed, 19 insertions(+), 3 deletions(-)

diff --git a/drivers/rpmsg/virtio_rpmsg_bus.c b/drivers/rpmsg/virtio_rpmsg_bus.c
index 3090b0d..af76187 100644
--- a/drivers/rpmsg/virtio_rpmsg_bus.c
+++ b/drivers/rpmsg/virtio_rpmsg_bus.c
@@ -192,6 +192,22 @@ static int virtio_rpmsg_trysend_offchannel(struct
rpmsg_endpoint *ept, u32 src,
 	.trysend_offchannel = virtio_rpmsg_trysend_offchannel,
 };
 
+static inline dma_addr_t msg_dma_address(struct virtproc_info *vrp, void *msg)
+{
+	unsigned long offset = msg - vrp->rbufs;
+
+	return vrp->bufs_dma + offset;
+}
+
+static inline void rpmsg_msg_sg_init(struct virtproc_info *vrp,
+				     struct scatterlist *sg,
+				     void *msg, unsigned int len)
+{
+	sg_init_table(sg, 1);
+	sg_dma_address(sg) = msg_dma_address(vrp, msg);
+	sg_dma_len(sg) = len;
+}
+
 /**
  * __ept_release() - deallocate an rpmsg endpoint
  * @kref: the ept's reference count
@@ -604,7 +620,7 @@ static int rpmsg_send_offchannel_raw(struct rpmsg_device
*rpdev,
 			 msg, sizeof(*msg) + msg->len, true);
 #endif
 
-	sg_init_one(&sg, msg, sizeof(*msg) + len);
+	rpmsg_msg_sg_init(vrp, &sg, msg, sizeof(*msg) + len);
 
 	mutex_lock(&vrp->tx_lock);
 
@@ -729,7 +745,7 @@ static int rpmsg_recv_single(struct virtproc_info *vrp,
struct device *dev,
 		dev_warn(dev, "msg received with no recipient\n");
 
 	/* publish the real size of the buffer */
-	sg_init_one(&sg, msg, RPMSG_BUF_SIZE);
+	rpmsg_msg_sg_init(vrp, &sg, msg, RPMSG_BUF_SIZE);
 
 	/* add the buffer back to the remote processor's virtqueue */
 	err = virtqueue_add_inbuf(vrp->rvq, &sg, 1, msg, GFP_KERNEL);
@@ -911,7 +927,7 @@ static int rpmsg_probe(struct virtio_device *vdev)
 		struct scatterlist sg;
 		void *cpu_addr = vrp->rbufs + i * RPMSG_BUF_SIZE;
 
-		sg_init_one(&sg, cpu_addr, RPMSG_BUF_SIZE);
+		rpmsg_msg_sg_init(vrp, &sg, cpu_addr, RPMSG_BUF_SIZE);
 
 		err = virtqueue_add_inbuf(vrp->rvq, &sg, 1, cpu_addr,
 					  GFP_KERNEL);
-- 
1.9.1