This patchset replace CONFIG_PM with CONFIG_PM_SLEEP for all virtio drivers and virtio pci driver. With patch 1/2, two compile warnings are eliminated for virtio pci driver, and patch 2/2 is a clean up for all virtio drivers as suggested by Amit Shah. Aaron Lu (2): virtio_pci: pm: Use CONFIG_PM_SLEEP instead of CONFIG_PM virtio: pm: use CONFIG_PM_SLEEP instead of CONFIG_PM drivers/block/virtio_blk.c | 4 ++-- drivers/char/hw_random/virtio-rng.c | 4 ++-- drivers/char/virtio_console.c | 4 ++-- drivers/net/virtio_net.c | 4 ++-- drivers/scsi/virtio_scsi.c | 4 ++-- drivers/virtio/virtio_balloon.c | 4 ++-- drivers/virtio/virtio_pci.c | 4 ++-- 7 files changed, 14 insertions(+), 14 deletions(-) -- 1.8.4.12.g2ea3df6
Aaron Lu
2013-Sep-06 08:20 UTC
[PATCH 1/2] virtio_pci: pm: Use CONFIG_PM_SLEEP instead of CONFIG_PM
The virtio_pci_freeze/restore are defined under CONFIG_PM but is used
by SET_SYSTEM_SLEEP_PM_OPS macro, which is defined under
CONFIG_PM_SLEEP. So if CONFIG_PM_SLEEP is not cofigured but
CONFIG_PM_RUNTIME is, the following warning message appeared:
drivers/virtio/virtio_pci.c:770:12: warning: ?virtio_pci_freeze? defined but not
used [-Wunused-function]
static int virtio_pci_freeze(struct device *dev)
^
drivers/virtio/virtio_pci.c:790:12: warning: ?virtio_pci_restore? defined but
not used [-Wunused-function]
static int virtio_pci_restore(struct device *dev)
^
Fix it by changing CONFIG_PM to CONFIG_PM_SLEEP.
Signed-off-by: Aaron Lu <aaron.lu at intel.com>
Reviewed-by: Amit Shah <amit.shah at redhat.com>
---
drivers/virtio/virtio_pci.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/virtio/virtio_pci.c b/drivers/virtio/virtio_pci.c
index 1aba255..98917fc 100644
--- a/drivers/virtio/virtio_pci.c
+++ b/drivers/virtio/virtio_pci.c
@@ -766,7 +766,7 @@ static void virtio_pci_remove(struct pci_dev *pci_dev)
kfree(vp_dev);
}
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
static int virtio_pci_freeze(struct device *dev)
{
struct pci_dev *pci_dev = to_pci_dev(dev);
@@ -824,7 +824,7 @@ static struct pci_driver virtio_pci_driver = {
.id_table = virtio_pci_id_table,
.probe = virtio_pci_probe,
.remove = virtio_pci_remove,
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
.driver.pm = &virtio_pci_pm_ops,
#endif
};
--
1.8.4.12.g2ea3df6
Aaron Lu
2013-Sep-06 08:20 UTC
[PATCH 2/2] virtio: pm: use CONFIG_PM_SLEEP instead of CONFIG_PM
The freeze and restore functions defined in virtio drivers are used
for suspend and hibernate, so CONFIG_PM_SLEEP is more appropriate than
CONFIG_PM. This patch replace all CONFIG_PM with CONFIG_PM_SLEEP for
virtio drivers that implement freeze and restore callbacks.
Signed-off-by: Aaron Lu <aaron.lu at intel.com>
---
drivers/block/virtio_blk.c | 4 ++--
drivers/char/hw_random/virtio-rng.c | 4 ++--
drivers/char/virtio_console.c | 4 ++--
drivers/net/virtio_net.c | 4 ++--
drivers/scsi/virtio_scsi.c | 4 ++--
drivers/virtio/virtio_balloon.c | 4 ++--
6 files changed, 12 insertions(+), 12 deletions(-)
diff --git a/drivers/block/virtio_blk.c b/drivers/block/virtio_blk.c
index 5cdf88b..89245b5 100644
--- a/drivers/block/virtio_blk.c
+++ b/drivers/block/virtio_blk.c
@@ -899,7 +899,7 @@ static void virtblk_remove(struct virtio_device *vdev)
ida_simple_remove(&vd_index_ida, index);
}
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
static int virtblk_freeze(struct virtio_device *vdev)
{
struct virtio_blk *vblk = vdev->priv;
@@ -959,7 +959,7 @@ static struct virtio_driver virtio_blk = {
.probe = virtblk_probe,
.remove = virtblk_remove,
.config_changed = virtblk_config_changed,
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
.freeze = virtblk_freeze,
.restore = virtblk_restore,
#endif
diff --git a/drivers/char/hw_random/virtio-rng.c
b/drivers/char/hw_random/virtio-rng.c
index ef46a9c..c12398d 100644
--- a/drivers/char/hw_random/virtio-rng.c
+++ b/drivers/char/hw_random/virtio-rng.c
@@ -133,7 +133,7 @@ static void virtrng_remove(struct virtio_device *vdev)
remove_common(vdev);
}
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
static int virtrng_freeze(struct virtio_device *vdev)
{
remove_common(vdev);
@@ -157,7 +157,7 @@ static struct virtio_driver virtio_rng_driver = {
.id_table = id_table,
.probe = virtrng_probe,
.remove = virtrng_remove,
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
.freeze = virtrng_freeze,
.restore = virtrng_restore,
#endif
diff --git a/drivers/char/virtio_console.c b/drivers/char/virtio_console.c
index fc45567..2e96246 100644
--- a/drivers/char/virtio_console.c
+++ b/drivers/char/virtio_console.c
@@ -2135,7 +2135,7 @@ static struct virtio_device_id rproc_serial_id_table[] = {
static unsigned int rproc_serial_features[] = {
};
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
static int virtcons_freeze(struct virtio_device *vdev)
{
struct ports_device *portdev;
@@ -2213,7 +2213,7 @@ static struct virtio_driver virtio_console = {
.probe = virtcons_probe,
.remove = virtcons_remove,
.config_changed = config_intr,
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
.freeze = virtcons_freeze,
.restore = virtcons_restore,
#endif
diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
index defec2b..2ad3d96 100644
--- a/drivers/net/virtio_net.c
+++ b/drivers/net/virtio_net.c
@@ -1683,7 +1683,7 @@ static void virtnet_remove(struct virtio_device *vdev)
free_netdev(vi->dev);
}
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
static int virtnet_freeze(struct virtio_device *vdev)
{
struct virtnet_info *vi = vdev->priv;
@@ -1766,7 +1766,7 @@ static struct virtio_driver virtio_net_driver = {
.probe = virtnet_probe,
.remove = virtnet_remove,
.config_changed = virtnet_config_changed,
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
.freeze = virtnet_freeze,
.restore = virtnet_restore,
#endif
diff --git a/drivers/scsi/virtio_scsi.c b/drivers/scsi/virtio_scsi.c
index 74b88ef..2a11039 100644
--- a/drivers/scsi/virtio_scsi.c
+++ b/drivers/scsi/virtio_scsi.c
@@ -954,7 +954,7 @@ static void virtscsi_remove(struct virtio_device *vdev)
scsi_host_put(shost);
}
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
static int virtscsi_freeze(struct virtio_device *vdev)
{
virtscsi_remove_vqs(vdev);
@@ -988,7 +988,7 @@ static struct virtio_driver virtio_scsi_driver = {
.id_table = id_table,
.probe = virtscsi_probe,
.scan = virtscsi_scan,
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
.freeze = virtscsi_freeze,
.restore = virtscsi_restore,
#endif
diff --git a/drivers/virtio/virtio_balloon.c b/drivers/virtio/virtio_balloon.c
index 1f572c0..d6f6816 100644
--- a/drivers/virtio/virtio_balloon.c
+++ b/drivers/virtio/virtio_balloon.c
@@ -513,7 +513,7 @@ static void virtballoon_remove(struct virtio_device *vdev)
kfree(vb);
}
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
static int virtballoon_freeze(struct virtio_device *vdev)
{
struct virtio_balloon *vb = vdev->priv;
@@ -556,7 +556,7 @@ static struct virtio_driver virtio_balloon_driver = {
.probe = virtballoon_probe,
.remove = virtballoon_remove,
.config_changed = virtballoon_changed,
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
.freeze = virtballoon_freeze,
.restore = virtballoon_restore,
#endif
--
1.8.4.12.g2ea3df6
Amit Shah
2013-Sep-06 08:22 UTC
[PATCH 0/2] virtio: Replace CONFIG_PM with CONFIG_PM_SLEEP
On (Fri) 06 Sep 2013 [16:20:05], Aaron Lu wrote:> This patchset replace CONFIG_PM with CONFIG_PM_SLEEP for all virtio > drivers and virtio pci driver. > > With patch 1/2, two compile warnings are eliminated for virtio pci > driver, and patch 2/2 is a clean up for all virtio drivers as suggested > by Amit Shah.Thank you. Reviewed-by: Amit Shah <amit.shah at redhat.com> Amit
On 09/06/2013 04:22 PM, Amit Shah wrote:> On (Fri) 06 Sep 2013 [16:20:05], Aaron Lu wrote: >> This patchset replace CONFIG_PM with CONFIG_PM_SLEEP for all virtio >> drivers and virtio pci driver. >> >> With patch 1/2, two compile warnings are eliminated for virtio pci >> driver, and patch 2/2 is a clean up for all virtio drivers as suggested >> by Amit Shah. > > Thank you.My pleasure, thanks for your review. I was addressing a comment for my patch: http://marc.info/?l=linux-pm&m=137839111130358&w=2 and accidentally found this issue here :-) -Aaron> > Reviewed-by: Amit Shah <amit.shah at redhat.com> > > Amit >
Reasonably Related Threads
- [PATCH 0/2] virtio: Replace CONFIG_PM with CONFIG_PM_SLEEP
- [PATCH 0/2] virtio: Replace CONFIG_PM with CONFIG_PM_SLEEP
- [PATCH 0/2] virtio: Replace CONFIG_PM with CONFIG_PM_SLEEP
- [PATCH] virtio_pci: pm: Use CONFIG_PM_SLEEP instead of CONFIG_PM
- [PATCH] virtio_pci: pm: Use CONFIG_PM_SLEEP instead of CONFIG_PM