Linux Ethernet Bridging - Apr 2023 - [Bridge] [PATCH net-next] net/bridge: add drop reasons for bridge forwarding

On Thu, 6 Apr 2023 19:30:34 +0800 (CST) yang.yang29 at zte.com.cn
wrote:
> From: xu xin <xu.xin16 at zte.com.cn>
> 
> This creates six drop reasons as follows, which will help users know the
> specific reason why bridge drops the packets when forwarding.
> 
> 1) SKB_DROP_REASON_BRIDGE_FWD_NO_BACKUP_PORT: failed to get a backup
>    port link when the destination port is down.
> 
> 2) SKB_DROP_REASON_BRIDGE_FWD_SAME_PORT: destination port is the same
>    with originating port when forwarding by a bridge.
> 
> 3) SKB_DROP_REASON_BRIDGE_NON_FORWARDING_STATE: the bridge's state is
>    not forwarding.
> 
> 4) SKB_DROP_REASON_BRIDGE_NOT_ALLOWED_EGRESS: the packet is not allowed
>    to go out through the port due to vlan filtering.
> 
> 5) SKB_DROP_REASON_BRIDGE_SWDEV_NOT_ALLOWED_EGRESS: the packet is not
>    allowed to go out through the port which is offloaded by a hardware
>    switchdev, checked by nbp_switchdev_allowed_egress().
> 
> 6) SKB_DROP_REASON_BRIDGE_BOTH_PORT_ISOLATED: both source port and dest
>    port are in BR_ISOLATED state when bridge forwarding.
> @@ -338,6 +344,33 @@ enum skb_drop_reason {
>  	 * for another host.
>  	 */
>  	SKB_DROP_REASON_IPV6_NDISC_NS_OTHERHOST,
> +	/** @SKB_DROP_REASON_BRIDGE_FWD_NO_BACKUP_PORT: failed to get a backup
> +	 * port link when the destination port is down.
> +	 */
That's not valid kdoc. Text can be on the same line as the value only
in one-line comments. Otherwise:
	/**
	 * @VALUE: bla bla bla
	 *	more blas.
	 */
> +static inline bool should_deliver(const struct net_bridge_port *p, const
struct sk_buff *skb,
> +					 enum skb_drop_reason *need_reason)
>  {
>  	struct net_bridge_vlan_group *vg;
> +	enum skb_drop_reason reason;
> 
>  	vg = nbp_vlan_group_rcu(p);
> -	return ((p->flags & BR_HAIRPIN_MODE) || skb->dev != p->dev)
&&
> -		p->state == BR_STATE_FORWARDING && br_allowed_egress(vg, skb)
&&
> -		nbp_switchdev_allowed_egress(p, skb) &&
> -		!br_skb_isolated(p, skb);
> +	if (!(p->flags & BR_HAIRPIN_MODE) && skb->dev ==
p->dev) {
> +		reason = SKB_DROP_REASON_BRIDGE_FWD_SAME_PORT;
> +		goto undeliverable;
> +	}
> +	if (p->state != BR_STATE_FORWARDING) {
> +		reason = SKB_DROP_REASON_BRIDGE_NON_FORWARDING_STATE;
> +		goto undeliverable;
> +	}
> +	if (!br_allowed_egress(vg, skb)) {
> +		reason = SKB_DROP_REASON_BRIDGE_NOT_ALLOWED_EGRESS;
> +		goto undeliverable;
> +	}
> +	if (!nbp_switchdev_allowed_egress(p, skb)) {
> +		reason = SKB_DROP_REASON_BRIDGE_SWDEV_NOT_ALLOWED_EGRESS;
> +		goto undeliverable;
> +	}
> +	if (br_skb_isolated(p, skb)) {
> +		reason = SKB_DROP_REASON_BRIDGE_BOTH_PORT_ISOLATED;
> +		goto undeliverable;
> +	}
> +	return true;
> +
> +undeliverable:
> +	if (need_reason)
> +		*need_reason = reason;
> +	return false;
You can return the reason from this function. That's the whole point of
SKB_NOT_DROPPED_YET existing and being equal to 0.

Which is not to say that I know whether the reasons are worth adding
here. We'll need to hear from bridge experts on that.

>On Thu, 6 Apr 2023 19:30:34 +0800 (CST) yang.yang29 at zte.com.cn wrote:
>> From: xu xin <xu.xin16 at zte.com.cn>
>> 
>> This creates six drop reasons as follows, which will help users know
the
>> specific reason why bridge drops the packets when forwarding.
>> 
>> 1) SKB_DROP_REASON_BRIDGE_FWD_NO_BACKUP_PORT: failed to get a backup
>>    port link when the destination port is down.
>> 
>> 2) SKB_DROP_REASON_BRIDGE_FWD_SAME_PORT: destination port is the same
>>    with originating port when forwarding by a bridge.
>> 
>> 3) SKB_DROP_REASON_BRIDGE_NON_FORWARDING_STATE: the bridge's state
is
>>    not forwarding.
>> 
>> 4) SKB_DROP_REASON_BRIDGE_NOT_ALLOWED_EGRESS: the packet is not allowed
>>    to go out through the port due to vlan filtering.
>> 
>> 5) SKB_DROP_REASON_BRIDGE_SWDEV_NOT_ALLOWED_EGRESS: the packet is not
>>    allowed to go out through the port which is offloaded by a hardware
>>    switchdev, checked by nbp_switchdev_allowed_egress().
>> 
>> 6) SKB_DROP_REASON_BRIDGE_BOTH_PORT_ISOLATED: both source port and dest
>>    port are in BR_ISOLATED state when bridge forwarding.
>
>> @@ -338,6 +344,33 @@ enum skb_drop_reason {
>>  	 * for another host.
>>  	 */
>>  	SKB_DROP_REASON_IPV6_NDISC_NS_OTHERHOST,
>> +	/** @SKB_DROP_REASON_BRIDGE_FWD_NO_BACKUP_PORT: failed to get a
backup
>> +	 * port link when the destination port is down.
>> +	 */
>
>That's not valid kdoc. Text can be on the same line as the value only
>in one-line comments. Otherwise:
>	/**
>	 * @VALUE: bla bla bla
>	 *	more blas.
>	 */
>
Ok, I didn't notice that.
>> +static inline bool should_deliver(const struct net_bridge_port *p,
const struct sk_buff *skb,
>> +					 enum skb_drop_reason *need_reason)
>>  {
>>  	struct net_bridge_vlan_group *vg;
>> +	enum skb_drop_reason reason;
>> 
>>  	vg = nbp_vlan_group_rcu(p);
>> -	return ((p->flags & BR_HAIRPIN_MODE) || skb->dev !=
p->dev) &&
>> -		p->state == BR_STATE_FORWARDING && br_allowed_egress(vg,
skb) &&
>> -		nbp_switchdev_allowed_egress(p, skb) &&
>> -		!br_skb_isolated(p, skb);
>> +	if (!(p->flags & BR_HAIRPIN_MODE) && skb->dev ==
p->dev) {
>> +		reason = SKB_DROP_REASON_BRIDGE_FWD_SAME_PORT;
>> +		goto undeliverable;
>> +	}
>> +	if (p->state != BR_STATE_FORWARDING) {
>> +		reason = SKB_DROP_REASON_BRIDGE_NON_FORWARDING_STATE;
>> +		goto undeliverable;
>> +	}
>> +	if (!br_allowed_egress(vg, skb)) {
>> +		reason = SKB_DROP_REASON_BRIDGE_NOT_ALLOWED_EGRESS;
>> +		goto undeliverable;
>> +	}
>> +	if (!nbp_switchdev_allowed_egress(p, skb)) {
>> +		reason = SKB_DROP_REASON_BRIDGE_SWDEV_NOT_ALLOWED_EGRESS;
>> +		goto undeliverable;
>> +	}
>> +	if (br_skb_isolated(p, skb)) {
>> +		reason = SKB_DROP_REASON_BRIDGE_BOTH_PORT_ISOLATED;
>> +		goto undeliverable;
>> +	}
>> +	return true;
>> +
>> +undeliverable:
>> +	if (need_reason)
>> +		*need_reason = reason;
>> +	return false;
>
>You can return the reason from this function. That's the whole point of
>SKB_NOT_DROPPED_YET existing and being equal to 0.
>
If returning the reasons, then the funtion will have to be renamed because
'should_deliever()' is expected to return a non-zero value  when
it's ok to
deliever. I don't want to change the name here, and it's better to keep
its
name and use the pointer to store the reasons.
>Which is not to say that I know whether the reasons are worth adding
>here. We'll need to hear from bridge experts on that.

On Wed, 12 Apr 2023 09:33:10 +0800 xu xin wrote:
> >You can return the reason from this function. That's the whole
point of
> >SKB_NOT_DROPPED_YET existing and being equal to 0.
> 
> If returning the reasons, then the funtion will have to be renamed because
> 'should_deliever()' is expected to return a non-zero value  when
it's ok to
> deliever. I don't want to change the name here, and it's better to
keep its
> name and use the pointer to store the reasons.
Sure. You have to touch all callers, anyway, you can as well adjust 
the name.