libvirt users - Dec 2013 - assign static external IP to container

hello i have a server colocated in a datacenter with several external IP
addresses available to use.  the physical server is using one of these
IPs, and i want to assign another, unused IP to the virtual machine.	i
thought i could just do this by editing the container's
/etc/network/interfaces, setting a static IP address for eth0 much like
i did for br0 on the host machine.... but doesn't seem to be working.
ifconfig shows eth0 has the external address but i can't resolve any
hostnames nor telnet to a direct IP address (no route to host).   if i
change back to dhcp and let eth0 get an internal address, i can at least
access the internet but cannot access the virtual machine from the
internet.  what is the trick to giving a VM a routable, external IP
address?  thanks

On 12/09/2013 05:14 AM, scar wrote:
> hello i have a server colocated in a datacenter with several external IP
> addresses available to use.  the physical server is using one of these
> IPs, and i want to assign another, unused IP to the virtual machine.	i
> thought i could just do this by editing the container's
> /etc/network/interfaces, setting a static IP address for eth0 much like
> i did for br0 on the host machine.... but doesn't seem to be working.
> ifconfig shows eth0 has the external address but i can't resolve any
> hostnames nor telnet to a direct IP address (no route to host).   if i
> change back to dhcp and let eth0 get an internal address, i can at least
> access the internet but cannot access the virtual machine from the
> internet.  what is the trick to giving a VM a routable, external IP
> address?  thanks
> 
I have a machine running libvirt lxc,
on this machine(host), the network configure looks like this
eth0 is the physical nic, virbr0 is the bridge libvirt created, and vnet0
is the veth device created for libvirt lxc container. you can see, the eth0
is a port of virbr0, and the ip is assigned on virbr0.

ifconfig

eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet6 fe80::5054:ff:fe39:626f  prefixlen 64  scopeid 0x20<link>
        ether 52:54:00:39:62:6f  txqueuelen 1000  (Ethernet)
        RX packets 1502  bytes 93029 (90.8 KiB)
        RX errors 0  dropped 10  overruns 0  frame 0
        TX packets 546  bytes 52825 (51.5 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

virbr0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet 192.168.122.178  netmask 255.255.255.0  broadcast 192.168.122.255
        ether 52:54:00:39:62:6f  txqueuelen 0  (Ethernet)
        RX packets 419  bytes 26899 (26.2 KiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 328  bytes 42246 (41.2 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

vnet0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet6 fe80::b4a1:32ff:fe56:5706  prefixlen 64  scopeid 0x20<link>
        ether b6:a1:32:56:57:06  txqueuelen 1000  (Ethernet)
        RX packets 21  bytes 1642 (1.6 KiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 214  bytes 11884 (11.6 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

brctl show
bridge name	bridge id		STP enabled	interfaces
virbr0		8000.52540039626f	yes		eth0
							vnet0


And in container

I change the ip of eth0 to 192.168.122.33 and add a route rule
ip route add default via 192.168.122.1 dev eth0

then the container can access the outside.

I think it should work even you change the 192.168.x.x to the
global ip.

Gao feng @ 12/11/2013 01:49 AM:
> I have a machine running libvirt lxc,
> on this machine(host), the network configure looks like this
> eth0 is the physical nic, virbr0 is the bridge libvirt created, and vnet0
> is the veth device created for libvirt lxc container. you can see, the eth0
> is a port of virbr0, and the ip is assigned on virbr0.
> 
> [snip]
> 
> And in container
> 
> I change the ip of eth0 to 192.168.122.33 and add a route rule
> ip route add default via 192.168.122.1 dev eth0
> 
> then the container can access the outside.
> 
> I think it should work even you change the 192.168.x.x to the
> global ip.
arrg thank you but this is all so confusing to me ><

this is what my ifconfig and brctl show looks like on host machine:
http://pastebin.com/9f1HzXi5

i want to use 67.180.246.123 for the container