search for: prefixlen

...sendmail_enable="NO" inetd_flags="-wW -a 10.0.2.6" - this is what ifconfig looks like OUT of jail : rl0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 inet 10.0.0.2 netmask 0xffffff00 broadcast 10.0.0.255 inet6 fe80::250:8dff:fe47:e567%rl0 prefixlen 64 scopeid 0x1 ether 00:50:8d:47:e5:67 media: Ethernet autoselect (10baseT/UTP) status: active rl1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 inet 10.0.2.1 netmask 0xffffff00 broadcast 10.0.2.255 inet6 fe80::250:fcff:fe47:8438%rl1 pref...

samba generates an unknown ip4 and ip6 address. here is my settings: root at server:/# ifconfig enp1s0f2: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet 192.168.81.20 netmask 255.255.255.0 broadcast 192.168.81.255 inet6 fe80::21b:21ff:fea6:ce92 prefixlen 64 scopeid 0x20<link> inet6 2001:470:1f1b:5b5:21b:21ff:fea6:ce92 prefixlen 64 scopeid 0x0<global> inet6 2001:470:1f1b:5b5::20 prefixlen 128 scopeid 0x0<global> ether 00:1b:21:a6:ce:92 txqueuelen 1000 (Ethernet) RX packets 107157 bytes 217075...

Hello, I have a big problem with my servers. I have 4 NIC on all my KVM Servers but the most time on a start (restart) I lost one NIC? It is not always the same, but this two are virtio NICs. with ifup eth0(1) the system say,I have no configured eth0 or eth1 file ? Can any tell me what I can do? thank's for a answer NetworkManager is disabled. -- mit freundlichen Gr??en / best regards,

...et controller: Intel Corporation I350 Ethernet Controller Virtual Function (rev 01) 00:0c.0 Ethernet controller: Intel Corporation I350 Ethernet Controller Virtual Function (rev 01) ifconfig; ens12: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet6 fe80::5054:ff:fe81:e89 prefixlen 64 scopeid 0x20<link> inet6 2001:15c0:xxxx:xxxx::xxxx prefixlen 64 scopeid 0x0<global> ether 52:54:00:81:0e:89 txqueuelen 1000 (Ethernet) RX packets 229 bytes 20108 (19.6 KiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 140 bytes...

...flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 address: 00:02:55:30:54:28 media: Ethernet autoselect (100baseTX full-duplex) status: active inet 192.168.1.1 netmask 0xffffff00 broadcast 192.168.1.255 inet6 fe80::202:55ff:fe30:5428%fxp0 prefixlen 64 scopeid 0x1 xl0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 address: 00:01:02:78:11:e8 media: Ethernet autoselect (10baseT) status: active inet 203.219.167.126 netmask 0xfffffffc broadcast 203.219.167.127 inet6 fe80::201:2ff:fe7...

...ates an unknown ip4 and ip6 address. > here is my settings: > > root at server:/# ifconfig > enp1s0f2: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 > inet 192.168.81.20 netmask 255.255.255.0 broadcast 192.168.81.255 > inet6 fe80::21b:21ff:fea6:ce92 prefixlen 64 scopeid 0x20<link> > inet6 2001:470:1f1b:5b5:21b:21ff:fea6:ce92 prefixlen 64 scopeid > 0x0<global> > inet6 2001:470:1f1b:5b5::20 prefixlen 128 scopeid 0x0<global> > ether 00:1b:21:a6:ce:92 txqueuelen 1000 (Ethernet) > RX pac...

...frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 enp1s0f2: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet *192.168.81.20* netmask 255.255.255.0 broadcast 192.168.81.255 inet6 2001:470:1f1b:5b5::20 prefixlen 128 scopeid 0x0<global> inet6 *2001:470:1f1b:5b5:21b:21ff:fea6:ce92* prefixlen 64 scopeid 0x0<global> inet6 fe80::21b:21ff:fea6:ce92 prefixlen 64 scopeid 0x20<link> ether 00:1b:21:a6:ce:92 txqueuelen 1000 (Ethernet) RX packets 1852657 bytes...

...VPN seems to work for IPv4 but not for IPv6. This is how the interfaces look like: A $ ifconfig tap0 tap0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=80000<LINKSTATE> ether 00:bd:6b:e5:19:00 inet6 fd16:dcc0:f4cc::1:0:1 prefixlen 80 inet6 fe80::2bd:6bff:fee5:1900%tap0 prefixlen 64 scopeid 0x4 inet 10.1.0.1 netmask 0xff000000 broadcast 10.255.255.255 nd6 options=23<PERFORMNUD,ACCEPT_RTADV,AUTO_LINKLOCAL> media: Ethernet autoselect status: active Opened by PID 6110...

On 03/08/2019 11:17, Patrik wrote: > the problem is that dnsupdate is not working becuase i use dlz. i > cannot use dbsupdate with dnsupdate it fails. > *_ > _* What is 'dbsupdate' ? I can assure you that dnsupdate does work with dlz. I think you need to give us more info. Rowland

Hello, I am having a some problems getting SSHD to run on the Ipv6 interface. Interface/Ipv6 Address: ipv6.open-systems.org [kevin at satan kevin/xp-0.0.15] 536 $ping6 ipv6.open-systems.org PING6(56=40+8+8 bytes) 3ffe:1200:3028:ff01::cab --> 3ffe:1200:3028:ff01::caa 16 bytes from 3ffe:1200:3028:ff01::caa, icmp_seq=0 hlim=64 time=73.96 ms sshd_config: ListenAddress

...stances are only working after "arp -s ip_of_router mac_of_router" Server: CentOS7, KVM Clients: CentOS6 and Fedora 21 What going wrong? [root at bgstkvmlr01 ~]# ifconfig bond0: flags=5187<UP,BROADCAST,RUNNING,MASTER,MULTICAST> mtu 1500 inet6 fe80::3ed9:2bff:fe0b:c706 prefixlen 64 scopeid 0x20<link> ether 3c:d9:2b:0b:c7:06 txqueuelen 0 (Ethernet) RX packets 7341811 bytes 9977559369 (9.2 GiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 2649574 bytes 3041071431 (2.8 GiB) TX errors 0 dropped 0 overruns 0 carrier...

...not the second one and I don't know how to enable it. If I run the command ifconfig -a this is what I see: eno16777728: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet 192.168.1.112 netmask 255.255.255.0 broadcast 192.168.1.255 inet6 fe80::250:56ff:fe2e:e245 prefixlen 64 scopeid 0x20<link> ether 00:50:56:2e:e2:45 txqueuelen 1000 (Ethernet) RX packets 126 bytes 17122 (16.7 KiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 83 bytes 12627 (12.3 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions...

Hello there. I've just install nut 2.2 from source on my FreeBSD box. I have an MGE AVR 600 UPS on a USB cable. Following the INSTALL instructions, everything works in term of the USB driver detecting the right UPS and upsd loads up and runs without error. However, upsc reports the following error: # upsc mge600 at localhost Error: Connection failure:Can't assign requested address

...nd appear like this in libvirt: >> >> [root@clusterdev01 ]# ifconfig >> br1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500 >>          inet 192.168.0.110  netmask 255.255.255.0  broadcast >> 192.168.0.255 >>          inet6 fe80::1e98:ecff:fe1b:276d  prefixlen 64  scopeid >> 0x20<link> >>          ether 1c:98:ec:1b:27:6d  txqueuelen 1000  (Ethernet) >>          RX packets 833772  bytes 2976958254 (2.7 GiB) >>          RX errors 0  dropped 0  overruns 0  frame 0 >>          TX packets 331237  bytes 23335124 (22.2 MiB)...

...quot; Port "em1" Interface "em1" ovs_version: "1.4.0" $ifconfig em1 em1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet 10.66.97.253 netmask 255.255.254.0 broadcast 10.66.97.255 inet6 fe80::226:55ff:fe3e:971c prefixlen 64 scopeid 0x20<link> ether 00:26:55:3e:97:1c txqueuelen 1000 (Ethernet) RX packets 194955 bytes 81216930 (77.4 MiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 53004 bytes 9477482 (9.0 MiB) TX errors 0 dropped 0 overruns 0 carrier 0...

...I have a box with freebsd 9.1-Stable uname -a FreeBSD master.bogdanturcanu.ro 9.1-STABLE FreeBSD 9.1-STABLE #3: Fri Mar 8 18:43:56 EET 2013 root at master.bogdanturcanu.ro:/usr/obj/usr/src/sys/MASTER amd64 The server is connected ussing alc0 interface. If i run: Ifconfig alc0 inet6 x:x:x:x prefixlen 64 it's working. But, if I put in my rc.conf: ifconfig_alc0_ipv6="inet6 x:x:x: prefixlen 64" nothing happen. After reboot I have no ipv6 address on alc0, only Ipv4. Any clue? -------------- next part -------------- A non-text attachment was scrubbed... Name: smime....

...0 ??????? TX packets 1417201? bytes 209955717 (200.2 MiB) ??????? TX errors 0? dropped 0 overruns 0? carrier 0? collisions 0 ??????? device interrupt 16? memory 0xf1200000-f1220000 lo: flags=73<UP,LOOPBACK,RUNNING>? mtu 65536 ??????? inet 127.0.0.1? netmask 255.0.0.0 ??????? inet6 ::1? prefixlen 128? scopeid 0x10<host> ??????? loop? txqueuelen 1? (Local Loopback) ??????? RX packets 487991? bytes 165475903 (157.8 MiB) ??????? RX errors 0? dropped 0? overruns 0? frame 0 ??????? TX packets 487991? bytes 165475903 (157.8 MiB) ??????? TX errors 0? dropped 0 overruns 0? carrier 0? col...

...interface already have their assigned IP addresses and appear like this in libvirt: [root@clusterdev01 ]# ifconfig br1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500         inet 192.168.0.110  netmask 255.255.255.0  broadcast 192.168.0.255         inet6 fe80::1e98:ecff:fe1b:276d  prefixlen 64  scopeid 0x20<link>         ether 1c:98:ec:1b:27:6d  txqueuelen 1000  (Ethernet)         RX packets 833772  bytes 2976958254 (2.7 GiB)         RX errors 0  dropped 0  overruns 0  frame 0         TX packets 331237  bytes 23335124 (22.2 MiB)         TX errors 0  dropped 0 overruns 0  ca...

...ange their passwords. Here's the relevant (I think) code: genie# ifconfig fxp0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 options=8<VLAN_MTU> inet 192.168.77.1 netmask 0xffffff00 broadcast 192.168.77.255 inet6 fe80::2a0:c9ff:fe89:ca86%fxp0 prefixlen 64 scopeid 0x1 ether 00:a0:c9:89:ca:86 media: Ethernet autoselect (100baseTX <full-duplex>) status: active xl0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500 options=9<RXCSUM,VLAN_MTU> ether 00:04:75:ad:a2:a4 media: Ethernet autos...

...d I can now ping across both bridges: br1 > (192.168.0.0/24) and br1600 (192.168.1.0/24): > > br1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500 >         inet 192.168.0.110  netmask 255.255.255.0  broadcast > 192.168.0.255 >         inet6 fe80::1e98:ecff:fe1b:276d  prefixlen 64  scopeid 0x20<link> >         ether 1c:98:ec:1b:27:6d  txqueuelen 1000  (Ethernet) >         RX packets 21608  bytes 10289553 (9.8 MiB) >         RX errors 0  dropped 0  overruns 0  frame 0 >         TX packets 1372  bytes 131012 (127.9 KiB) >         TX errors 0  dropped 0...