Hey,
I've opened a bug against ubuntu at [1]. I realize this is probably not
a high priority, but I was just curious if it is possible to have libvirt
configure a network and *not* run a DNS server on it (dnsmasq). Perhaps I
could convince libvirt to run dnsmasq with '--port 0'?
For my explicit use case i was hoping/expecting to run my own dns and
dhcp servers, possibly a specific server bound only to that interface (as
dnsmasq does). I just wanted libvirt to create the bridge and setup NAT
(and automatically bring the network and any configured guests on it up on
boot).
Heres what I did.
$ BRIDGE="mybr0"; IP="192.168.123.1";
$ cat > $BRIDGE.xml <<EOF
<network>
<name>$BRIDGE</name>
<forward mode='nat'/>
<bridge name='$BRIDGE' stp='off' delay='0' />
<ip address='$IP' netmask='255.255.255.0'>
</ip>
</network>
EOF
$ sudo virsh -c qemu:///system net-define $BRIDGE.xml
$ sudo virsh -c qemu:///system net-start $BRIDGE
## See, after 'start' dnsmasq is running and usable on that interface.
$ ps axw | grep dnsm | grep $BRIDGE.pid
9888 ? S 0:00 /usr/sbin/dnsmasq -u libvirt-dnsmasq --strict-order
--bind-interfaces --pid-file=/var/run/libvirt/network/mybr0.pid
--conf-file= --except-interface lo --listen-address 192.168.123.1
$ dig +short @$IP www.ubuntu.com
91.189.90.41
--
[1] https://bugs.launchpad.net/ubuntu/+source/libvirt/+bug/1053408
