Eric Blake
2019-Jul-30 21:37 UTC
[Libguestfs] [nbdkit PATCH v2] tests: Accommodate qemu-img 4.1 output change
Where qemu-img 4.0 used to say 'virtual size: 100M', the 4.1 release
now says 'virtual size: 100 MiB'. Similarly, '5.0G' turned into
'5
GiB'. But rather than worry about potential future changes to the
human-readable output, we can just use --output=json (at which point
we no longer even have to force qemu-img to the C locale). It might
be slightly more robust to find our specific information using jq, but
for now a grep of the output json is still reliable enough for our
needs.
If the '\b' is a problem on BSD, we could use '([, ]|$)'
instead. Or
that's where jq would make it easier to parse off a given number
without worrying about what comes after the number.
Signed-off-by: Eric Blake <eblake@redhat.com>
---
We could still use jq if desired, but it was easy enough to let these
tests pass instead of skip when jq is not present.
tests/test-ip.sh | 10 ++++++----
tests/test-nbd-tls-psk.sh | 6 +++---
tests/test-nbd-tls.sh | 6 +++---
tests/test-tls-psk.sh | 7 +++----
tests/test-tls.sh | 7 +++----
tests/test-truncate3.sh | 4 ++--
6 files changed, 20 insertions(+), 20 deletions(-)
diff --git a/tests/test-ip.sh b/tests/test-ip.sh
index 636d3d3f..5a00a2ec 100755
--- a/tests/test-ip.sh
+++ b/tests/test-ip.sh
@@ -57,15 +57,17 @@ kill -s 0 $pid
# Check we can connect over the IPv4 loopback interface.
ipv4_lo="$(ip -o -4 addr show scope host)"
if test -n "$ipv4_lo"; then
- qemu-img info --image-opts
"file.driver=nbd,file.host=127.0.0.1,file.port=$port" > ipv4.out
+ qemu-img info --output=json \
+ --image-opts
"file.driver=nbd,file.host=127.0.0.1,file.port=$port" > ipv4.out
cat ipv4.out
- grep -sq "^virtual size: 100M" ipv4.out
+ grep -sq '"virtual-size": *104857600\b' ipv4.out
fi
# Check we can connect over the IPv6 loopback interface.
ipv6_lo="$(ip -o -6 addr show scope host)"
if test -n "$ipv6_lo"; then
- qemu-img info --image-opts
"file.driver=nbd,file.host=::1,file.port=$port" > ipv6.out
+ qemu-img info --output=json \
+ --image-opts "file.driver=nbd,file.host=::1,file.port=$port" >
ipv6.out
cat ipv6.out
- grep -sq "^virtual size: 100M" ipv6.out
+ grep -sq '"virtual-size": *104857600\b' ipv6.out
fi
diff --git a/tests/test-nbd-tls-psk.sh b/tests/test-nbd-tls-psk.sh
index d0bbc468..82822d11 100755
--- a/tests/test-nbd-tls-psk.sh
+++ b/tests/test-nbd-tls-psk.sh
@@ -73,9 +73,9 @@ LIBNBD_DEBUG=1 start_nbdkit -P "$pid2" -U
"$sock2" --tls=off \
nbd tls=require tls-psk=keys.psk tls-username=qemu
socket="$sock1"
# Run unencrypted client
-LANG=C qemu-img info -f raw "nbd+unix:///?socket=$sock2" >
nbd-tls-psk.out
+qemu-img info --output=json -f raw "nbd+unix:///?socket=$sock2" >
nbd-tls-psk.out
cat nbd-tls-psk.out
-grep -sq "^file format: raw" nbd-tls-psk.out
-grep -sq "^virtual size: 100M" nbd-tls-psk.out
+grep -sq '"format": *"raw"' nbd-tls-psk.out
+grep -sq '"virtual-size": *104857600\b' nbd-tls-psk.out
diff --git a/tests/test-nbd-tls.sh b/tests/test-nbd-tls.sh
index af824d23..c4f4faca 100755
--- a/tests/test-nbd-tls.sh
+++ b/tests/test-nbd-tls.sh
@@ -74,9 +74,9 @@ LIBNBD_DEBUG=1 start_nbdkit -P "$pid2" -U
"$sock2" --tls=off \
nbd tls=require tls-certificates="$pkidir"
socket="$sock1"
# Run unencrypted client
-LANG=C qemu-img info -f raw "nbd+unix:///?socket=$sock2" >
nbd-tls.out
+qemu-img info --output=json -f raw "nbd+unix:///?socket=$sock2" >
nbd-tls.out
cat nbd-tls.out
-grep -sq "^file format: raw" nbd-tls.out
-grep -sq "^virtual size: 100M" nbd-tls.out
+grep -sq '"format": *"raw"' nbd-tls.out
+grep -sq '"virtual-size": *104857600\b' nbd-tls.out
diff --git a/tests/test-tls-psk.sh b/tests/test-tls-psk.sh
index 393f5893..a4ecb604 100755
--- a/tests/test-tls-psk.sh
+++ b/tests/test-tls-psk.sh
@@ -72,12 +72,11 @@ start_nbdkit -P tls-psk.pid -p $port -n \
--tls=require --tls-psk=keys.psk example1
# Run qemu-img against the server.
-LANG=C \
-qemu-img info \
+qemu-img info --output=json \
--object "tls-creds-psk,id=tls0,endpoint=client,dir=$PWD" \
--image-opts
"file.driver=nbd,file.host=localhost,file.port=$port,file.tls-creds=tls0"
> tls-psk.out
cat tls-psk.out
-grep -sq "^file format: raw" tls-psk.out
-grep -sq "^virtual size: 100M" tls-psk.out
+grep -sq '"format": *"raw"' tls-psk.out
+grep -sq '"virtual-size": *104857600\b' tls-psk.out
diff --git a/tests/test-tls.sh b/tests/test-tls.sh
index 70d40aea..2718e552 100755
--- a/tests/test-tls.sh
+++ b/tests/test-tls.sh
@@ -65,12 +65,11 @@ start_nbdkit -P tls.pid -p $port -n --tls=require \
--tls-certificates="$pkidir" example1
# Run qemu-img against the server.
-LANG=C \
-qemu-img info \
+qemu-img info --output=json \
--object
"tls-creds-x509,id=tls0,endpoint=client,dir=$pkidir" \
--image-opts
"file.driver=nbd,file.host=localhost,file.port=$port,file.tls-creds=tls0"
> tls.out
cat tls.out
-grep -sq "^file format: raw" tls.out
-grep -sq "^virtual size: 100M" tls.out
+grep -sq '"format": *"raw"' tls.out
+grep -sq '"virtual-size": *104857600\b' tls.out
diff --git a/tests/test-truncate3.sh b/tests/test-truncate3.sh
index 0a7fba8b..885d58f0 100755
--- a/tests/test-truncate3.sh
+++ b/tests/test-truncate3.sh
@@ -50,8 +50,8 @@ start_nbdkit -P truncate3.pid -U $sock \
pattern 5G \
round-up=512
-LANG=C qemu-img info nbd:unix:$sock > truncate3.out
-if ! grep "virtual size: 5.0G" truncate3.out; then
+qemu-img info --output=json nbd:unix:$sock > truncate3.out
+if ! grep '"virtual-size": *5368709120' truncate3.out; then
echo "$0: unexpected output from truncate3 regression test:"
cat truncate3.out
exit 1
--
2.20.1
Richard W.M. Jones
2019-Jul-30 22:02 UTC
Re: [Libguestfs] [nbdkit PATCH v2] tests: Accommodate qemu-img 4.1 output change
On Tue, Jul 30, 2019 at 04:37:59PM -0500, Eric Blake wrote:> Where qemu-img 4.0 used to say 'virtual size: 100M', the 4.1 release > now says 'virtual size: 100 MiB'. Similarly, '5.0G' turned into '5 > GiB'. But rather than worry about potential future changes to the > human-readable output, we can just use --output=json (at which point > we no longer even have to force qemu-img to the C locale). It might > be slightly more robust to find our specific information using jq, but > for now a grep of the output json is still reliable enough for our > needs. > > If the '\b' is a problem on BSD, we could use '([, ]|$)' instead. Or > that's where jq would make it easier to parse off a given number > without worrying about what comes after the number. > > Signed-off-by: Eric Blake <eblake@redhat.com> > --- > > We could still use jq if desired, but it was easy enough to let these > tests pass instead of skip when jq is not present.Yes interesting that we can do this without using jq. It all looks fine, so ACK. Thanks, Rich.> tests/test-ip.sh | 10 ++++++---- > tests/test-nbd-tls-psk.sh | 6 +++--- > tests/test-nbd-tls.sh | 6 +++--- > tests/test-tls-psk.sh | 7 +++---- > tests/test-tls.sh | 7 +++---- > tests/test-truncate3.sh | 4 ++-- > 6 files changed, 20 insertions(+), 20 deletions(-) > > diff --git a/tests/test-ip.sh b/tests/test-ip.sh > index 636d3d3f..5a00a2ec 100755 > --- a/tests/test-ip.sh > +++ b/tests/test-ip.sh > @@ -57,15 +57,17 @@ kill -s 0 $pid > # Check we can connect over the IPv4 loopback interface. > ipv4_lo="$(ip -o -4 addr show scope host)" > if test -n "$ipv4_lo"; then > - qemu-img info --image-opts "file.driver=nbd,file.host=127.0.0.1,file.port=$port" > ipv4.out > + qemu-img info --output=json \ > + --image-opts "file.driver=nbd,file.host=127.0.0.1,file.port=$port" > ipv4.out > cat ipv4.out > - grep -sq "^virtual size: 100M" ipv4.out > + grep -sq '"virtual-size": *104857600\b' ipv4.out > fi > > # Check we can connect over the IPv6 loopback interface. > ipv6_lo="$(ip -o -6 addr show scope host)" > if test -n "$ipv6_lo"; then > - qemu-img info --image-opts "file.driver=nbd,file.host=::1,file.port=$port" > ipv6.out > + qemu-img info --output=json \ > + --image-opts "file.driver=nbd,file.host=::1,file.port=$port" > ipv6.out > cat ipv6.out > - grep -sq "^virtual size: 100M" ipv6.out > + grep -sq '"virtual-size": *104857600\b' ipv6.out > fi > diff --git a/tests/test-nbd-tls-psk.sh b/tests/test-nbd-tls-psk.sh > index d0bbc468..82822d11 100755 > --- a/tests/test-nbd-tls-psk.sh > +++ b/tests/test-nbd-tls-psk.sh > @@ -73,9 +73,9 @@ LIBNBD_DEBUG=1 start_nbdkit -P "$pid2" -U "$sock2" --tls=off \ > nbd tls=require tls-psk=keys.psk tls-username=qemu socket="$sock1" > > # Run unencrypted client > -LANG=C qemu-img info -f raw "nbd+unix:///?socket=$sock2" > nbd-tls-psk.out > +qemu-img info --output=json -f raw "nbd+unix:///?socket=$sock2" > nbd-tls-psk.out > > cat nbd-tls-psk.out > > -grep -sq "^file format: raw" nbd-tls-psk.out > -grep -sq "^virtual size: 100M" nbd-tls-psk.out > +grep -sq '"format": *"raw"' nbd-tls-psk.out > +grep -sq '"virtual-size": *104857600\b' nbd-tls-psk.out > diff --git a/tests/test-nbd-tls.sh b/tests/test-nbd-tls.sh > index af824d23..c4f4faca 100755 > --- a/tests/test-nbd-tls.sh > +++ b/tests/test-nbd-tls.sh > @@ -74,9 +74,9 @@ LIBNBD_DEBUG=1 start_nbdkit -P "$pid2" -U "$sock2" --tls=off \ > nbd tls=require tls-certificates="$pkidir" socket="$sock1" > > # Run unencrypted client > -LANG=C qemu-img info -f raw "nbd+unix:///?socket=$sock2" > nbd-tls.out > +qemu-img info --output=json -f raw "nbd+unix:///?socket=$sock2" > nbd-tls.out > > cat nbd-tls.out > > -grep -sq "^file format: raw" nbd-tls.out > -grep -sq "^virtual size: 100M" nbd-tls.out > +grep -sq '"format": *"raw"' nbd-tls.out > +grep -sq '"virtual-size": *104857600\b' nbd-tls.out > diff --git a/tests/test-tls-psk.sh b/tests/test-tls-psk.sh > index 393f5893..a4ecb604 100755 > --- a/tests/test-tls-psk.sh > +++ b/tests/test-tls-psk.sh > @@ -72,12 +72,11 @@ start_nbdkit -P tls-psk.pid -p $port -n \ > --tls=require --tls-psk=keys.psk example1 > > # Run qemu-img against the server. > -LANG=C \ > -qemu-img info \ > +qemu-img info --output=json \ > --object "tls-creds-psk,id=tls0,endpoint=client,dir=$PWD" \ > --image-opts "file.driver=nbd,file.host=localhost,file.port=$port,file.tls-creds=tls0" > tls-psk.out > > cat tls-psk.out > > -grep -sq "^file format: raw" tls-psk.out > -grep -sq "^virtual size: 100M" tls-psk.out > +grep -sq '"format": *"raw"' tls-psk.out > +grep -sq '"virtual-size": *104857600\b' tls-psk.out > diff --git a/tests/test-tls.sh b/tests/test-tls.sh > index 70d40aea..2718e552 100755 > --- a/tests/test-tls.sh > +++ b/tests/test-tls.sh > @@ -65,12 +65,11 @@ start_nbdkit -P tls.pid -p $port -n --tls=require \ > --tls-certificates="$pkidir" example1 > > # Run qemu-img against the server. > -LANG=C \ > -qemu-img info \ > +qemu-img info --output=json \ > --object "tls-creds-x509,id=tls0,endpoint=client,dir=$pkidir" \ > --image-opts "file.driver=nbd,file.host=localhost,file.port=$port,file.tls-creds=tls0" > tls.out > > cat tls.out > > -grep -sq "^file format: raw" tls.out > -grep -sq "^virtual size: 100M" tls.out > +grep -sq '"format": *"raw"' tls.out > +grep -sq '"virtual-size": *104857600\b' tls.out > diff --git a/tests/test-truncate3.sh b/tests/test-truncate3.sh > index 0a7fba8b..885d58f0 100755 > --- a/tests/test-truncate3.sh > +++ b/tests/test-truncate3.sh > @@ -50,8 +50,8 @@ start_nbdkit -P truncate3.pid -U $sock \ > pattern 5G \ > round-up=512 > > -LANG=C qemu-img info nbd:unix:$sock > truncate3.out > -if ! grep "virtual size: 5.0G" truncate3.out; then > +qemu-img info --output=json nbd:unix:$sock > truncate3.out > +if ! grep '"virtual-size": *5368709120' truncate3.out; then > echo "$0: unexpected output from truncate3 regression test:" > cat truncate3.out > exit 1 > -- > 2.20.1 > > _______________________________________________ > Libguestfs mailing list > Libguestfs@redhat.com > https://www.redhat.com/mailman/listinfo/libguestfs-- Richard Jones, Virtualization Group, Red Hat http://people.redhat.com/~rjones Read my programming and virtualization blog: http://rwmj.wordpress.com Fedora Windows cross-compiler. Compile Windows programs, test, and build Windows installers. Over 100 libraries supported. http://fedoraproject.org/wiki/MinGW
Reasonably Related Threads
- [nbdkit PATCH] tests: Accommodate qemu-img 4.1 output change
- [nbdkit PATCH] tests: Swap nbdkit process order in test-nbd-tls-psk.sh
- Re: [nbdkit PATCH] tests: Swap nbdkit process order in test-nbd-tls-psk.sh
- [nbdkit PATCH] nozero: Add notrim mode
- [nbdkit PATCH 0/3] .list_exports in nbd plugin