Libguestfs - Sep 2018 - [PATCH nbdkit v2 2/6] main: Tighten up characters permitted in config keys.

v1 was here:

  https://www.redhat.com/archives/libguestfs/2018-September/msg00024.html

v2:

 - As discussed in the patch review, tighten up the characters
   permitted in keys.

 - Update documentation to note that relative paths can be made
   safe by prefixing with ./ and absolute paths do not need any
   extra steps.

 - I pushed patch 1/6 from the v1 series since it was just a trivial
   comment update.

Rich.

This extends the concept of the magic script parameter.  In existing
nbdkit plugins if the first parameter is "bare" (does not contain
'='), then it is parsed magically to allow scripting languages to
work:

  nbdkit perl foo.pl

is parsed as:

  nbdkit perl script=foo.pl

This generalises the concept, allowing a plugin.magic_config_key to be
defined.  If this is non-NULL then any bare parameters on the command
line:

  nbdkit file foo

where file_plugin.magic_config_key = "file" is parsed as:

  nbdkit file file=foo

If magic_config_key == NULL then the previous behaviour is used.

There is a small (but hopefully not noticable) change to the behaviour
of ‘--dump-plugin’.  It is now handled after all command line
parameters have been parsed but before the .config_complete method is
called (whereas previously it would be called after the first command
line parameter was parsed).

Note this change only applies to plugin parameters.
---
 docs/nbdkit-plugin.pod  | 17 +++++++++++
 docs/nbdkit.pod         |  8 +++---
 include/nbdkit-plugin.h |  2 ++
 src/filters.c           | 12 ++++++++
 src/internal.h          |  1 +
 src/main.c              | 62 ++++++++++++++++++++++++-----------------
 src/plugins.c           |  9 ++++++
 7 files changed, 81 insertions(+), 30 deletions(-)

diff --git a/docs/nbdkit-plugin.pod b/docs/nbdkit-plugin.pod
index 515c032..570a142 100644
--- a/docs/nbdkit-plugin.pod
+++ b/docs/nbdkit-plugin.pod
@@ -396,6 +396,23 @@ with an error.
 If there is an error, C<.config> should call C<nbdkit_error> with
an
 error message and return C<-1>.
 
+=head2 C<.magic_config_key>
+
+ const char *magic_config_key;
+
+This optional string can be used to set a "magic" key used when
+parsing plugin parameters.  It affects how "bare parameters" (those
+which do not contain an C<=> character) are parsed on the command
+line.
+
+If C<magic_config_key != NULL> then any bare parameters are passed to
+the C<.config> method as: S<C<config (magic_config_key,
argv[i]);>>.
+
+If C<magic_config_key> is not set then we behave as in nbdkit E<lt>
+1.7: If the first parameter on the command line is bare then it is
+passed to the C<.config> method as: S<C<config ("script",
value);>>.
+Any other bare parameters give errors.
+
 =head2 C<.config_complete>
 
  int config_complete (void);
diff --git a/docs/nbdkit.pod b/docs/nbdkit.pod
index 981e571..cf1c5ca 100644
--- a/docs/nbdkit.pod
+++ b/docs/nbdkit.pod
@@ -404,11 +404,11 @@ To dump information about a plugin, do:
 
 =head2 Magic script parameter
 
-As a special case, if the first plugin argument does not contain an
-C<'='> character then it is assumed to be C<script=value>.
+For some plugins, especially those supporting scripting languages like
+Perl, if the first plugin argument does not contain an C<'='>
+character then it is assumed to be C<script=value>.
 
-That allows scripting language plugins like L<nbdkit-perl-plugin(1)>
-to do:
+That allows scripting language plugins to do:
 
  nbdkit perl foo.pl [args...]
 
diff --git a/include/nbdkit-plugin.h b/include/nbdkit-plugin.h
index c95e26c..31aa6c7 100644
--- a/include/nbdkit-plugin.h
+++ b/include/nbdkit-plugin.h
@@ -121,6 +121,8 @@ struct nbdkit_plugin {
   int (*trim) (void *handle, uint32_t count, uint64_t offset, uint32_t flags);
   int (*zero) (void *handle, uint32_t count, uint64_t offset, uint32_t flags);
 #endif
+
+  const char *magic_config_key;
 };
 
 extern void nbdkit_set_error (int err);
diff --git a/src/filters.c b/src/filters.c
index e6826f2..3626742 100644
--- a/src/filters.c
+++ b/src/filters.c
@@ -205,6 +205,17 @@ filter_config_complete (struct backend *b)
     f->backend.next->config_complete (f->backend.next);
 }
 
+/* magic_config_key only applies to plugins, so this passes the
+ * request through to the plugin (hence the name).
+ */
+static const char *
+plugin_magic_config_key (struct backend *b)
+{
+  struct backend_filter *f = container_of (b, struct backend_filter, backend);
+
+  return f->backend.next->magic_config_key (f->backend.next);
+}
+
 static int
 next_open (void *nxdata, int readonly)
 {
@@ -619,6 +630,7 @@ static struct backend filter_functions = {
   .dump_fields = filter_dump_fields,
   .config = filter_config,
   .config_complete = filter_config_complete,
+  .magic_config_key = plugin_magic_config_key,
   .open = filter_open,
   .prepare = filter_prepare,
   .finalize = filter_finalize,
diff --git a/src/internal.h b/src/internal.h
index 1c5aa72..d4fc534 100644
--- a/src/internal.h
+++ b/src/internal.h
@@ -171,6 +171,7 @@ struct backend {
   void (*dump_fields) (struct backend *);
   void (*config) (struct backend *, const char *key, const char *value);
   void (*config_complete) (struct backend *);
+  const char *(*magic_config_key) (struct backend *);
   int (*open) (struct backend *, struct connection *conn, int readonly);
   int (*prepare) (struct backend *, struct connection *conn);
   int (*finalize) (struct backend *, struct connection *conn);
diff --git a/src/main.c b/src/main.c
index 8a83a32..9c18d6f 100644
--- a/src/main.c
+++ b/src/main.c
@@ -231,6 +231,7 @@ main (int argc, char *argv[])
     const char *filename;
   } *filter_filenames = NULL;
   size_t i;
+  const char *magic_config_key;
 
   threadlocal_init ();
 
@@ -680,37 +681,46 @@ main (int argc, char *argv[])
     exit (EXIT_SUCCESS);
   }
 
-  /* Find key=value configuration parameters for this plugin.
-   * The first one is magical in that if it doesn't contain '='
then
-   * we assume it is 'script=...'.
+  /* Call config and config_complete to parse the parameters.
+   *
+   * If the plugin provides magic_config_key then any "bare" values
+   * (ones not containing "=") are prefixed with this key.
+   *
+   * For backwards compatibility with old plugins, and to support
+   * scripting languages, if magic_config_key == NULL then if the
+   * first parameter is bare it is prefixed with the key "script",
and
+   * any other bare parameters are errors.
    */
-  if (optind < argc && (p = strchr (argv[optind], '=')) ==
NULL) {
-    backend->config (backend, "script", argv[optind]);
-    ++optind;
-  }
-
-  /* This must run after parsing the possible script parameter so that
-   * the script can be loaded for scripting languages.  Note that all
-   * scripting languages load the script as soon as they see the
-   * script=... parameter (and do not wait for config_complete).
-   */
-  if (dump_plugin) {
-    backend->dump_fields (backend);
-    exit (EXIT_SUCCESS);
-  }
-
-  while (optind < argc) {
-    if ((p = strchr (argv[optind], '=')) != NULL) {
+  magic_config_key = backend->magic_config_key (backend);
+  for (i = 0; optind < argc; ++i, ++optind) {
+    p = strchr (argv[optind], '=');
+    if (p) {                    /* key=value */
       *p = '\0';
       backend->config (backend, argv[optind], p+1);
-      ++optind;
     }
-    else {
-      fprintf (stderr,
-               "%s: expecting key=value on the command line but got:
%s\n",
-               program_name, argv[optind]);
-      exit (EXIT_FAILURE);
+    else if (magic_config_key == NULL) {
+      if (i == 0)               /* magic script parameter */
+        backend->config (backend, "script", argv[optind]);
+      else {
+        fprintf (stderr,
+                 "%s: expecting key=value on the command line but got:
%s\n",
+                 program_name, argv[optind]);
+        exit (EXIT_FAILURE);
+      }
     }
+    else {                      /* magic config key */
+      backend->config (backend, magic_config_key, argv[optind]);
+    }
+  }
+
+  /* This must run after parsing the parameters so that the script can
+   * be loaded for scripting languages.  But it must be called before
+   * config_complete so that the plugin doesn't check for missing
+   * parameters.
+   */
+  if (dump_plugin) {
+    backend->dump_fields (backend);
+    exit (EXIT_SUCCESS);
   }
 
   backend->config_complete (backend);
diff --git a/src/plugins.c b/src/plugins.c
index 780bbd9..2bea6ac 100644
--- a/src/plugins.c
+++ b/src/plugins.c
@@ -232,6 +232,14 @@ plugin_config_complete (struct backend *b)
     exit (EXIT_FAILURE);
 }
 
+static const char *
+plugin_magic_config_key (struct backend *b)
+{
+  struct backend_plugin *p = container_of (b, struct backend_plugin, backend);
+
+  return p->plugin.magic_config_key;
+}
+
 static int
 plugin_open (struct backend *b, struct connection *conn, int readonly)
 {
@@ -630,6 +638,7 @@ static struct backend plugin_functions = {
   .dump_fields = plugin_dump_fields,
   .config = plugin_config,
   .config_complete = plugin_config_complete,
+  .magic_config_key = plugin_magic_config_key,
   .open = plugin_open,
   .prepare = plugin_prepare,
   .finalize = plugin_finalize,
-- 
2.18.0

Previously key=value on the command line allowed the key to be pretty
much anything that didn't contain an '=' character.  Even empty
strings were permitted.

This tightens up the permitted keys so they must contain only ASCII
alphanumeric, period, underscore or dash characters, and must not be
an empty string.
---
 docs/nbdkit-plugin.pod | 18 ++++++++++--------
 src/main.c             | 32 +++++++++++++++++++++++++++++++-
 2 files changed, 41 insertions(+), 9 deletions(-)

diff --git a/docs/nbdkit-plugin.pod b/docs/nbdkit-plugin.pod
index 570a142..b37cac1 100644
--- a/docs/nbdkit-plugin.pod
+++ b/docs/nbdkit-plugin.pod
@@ -376,15 +376,17 @@ optional list of C<key=value> arguments.  These are
passed to the
 plugin through this callback when the plugin is first loaded and
 before any connections are accepted.
 
-This callback may be called zero or more times.  Both C<key> and
-C<value> parameters will be non-NULL, but it is possible for either to
-be empty strings.  The strings are owned by nbdkit but will remain
-valid for the lifetime of the plugin, so the plugin does not need to
-copy them.
+This callback may be called zero or more times.
 
-The format of the C<key> accepted by plugins is up to the plugin, but
-you should probably look at other plugins and follow the same
-conventions.
+Both C<key> and C<value> parameters will be non-NULL.  They key
will
+be a non-empty string containing only ASCII alphanumeric plus period,
+underscore or dash characters (C<A-Z> C<a-z> C<0-9>
C<.> C<_> C<->).
+The value may be an arbitrary string, including an empty string.  The
+strings are owned by nbdkit but will remain valid for the lifetime of
+the plugin, so the plugin does not need to copy them.
+
+The names of C<key>s accepted by plugins is up to the plugin, but you
+should probably look at other plugins and follow the same conventions.
 
 If the value is a relative path, then note that the server changes
 directory when it starts up.  See L</FILENAMES AND PATHS> above.
diff --git a/src/main.c b/src/main.c
index 9c18d6f..c523854 100644
--- a/src/main.c
+++ b/src/main.c
@@ -72,6 +72,7 @@ static void fork_into_background (void);
 static uid_t parseuser (const char *);
 static gid_t parsegroup (const char *);
 static unsigned int get_socket_activation (void);
+static int is_config_key (const char *key, size_t len);
 
 struct debug_flag *debug_flags; /* -D */
 int exit_with_parent;           /* --exit-with-parent */
@@ -694,7 +695,7 @@ main (int argc, char *argv[])
   magic_config_key = backend->magic_config_key (backend);
   for (i = 0; optind < argc; ++i, ++optind) {
     p = strchr (argv[optind], '=');
-    if (p) {                    /* key=value */
+    if (p && is_config_key (argv[optind], p - argv[optind])) { /*
key=value */
       *p = '\0';
       backend->config (backend, argv[optind], p+1);
     }
@@ -1281,3 +1282,32 @@ get_socket_activation (void)
 
   return nr_fds;
 }
+
+/* When parsing plugin and filter config key=value from the command
+ * line, check that the key is a simple alphanumeric with period,
+ * underscore or dash.
+ *
+ * Note this doesn't return an error.  If the key is not valid then we
+ * return false and the parsing code will assume that this is a bare
+ * value instead.
+ */
+static int
+is_config_key (const char *key, size_t len)
+{
+  const char allowed[] +    "abcdefghijklmnopqrstuvwxyz"
+    "ABCDEFGHIJKLMNOPQRSTUVWXYZ"
+    "0123456789"
+    "._-";
+  size_t i;
+
+  if (key[0] == '\0')
+    return 0;
+
+  for (i = 0; i < len; ++i) {
+    if (strchr (allowed, key[i]) == NULL)
+      return 0;
+  }
+
+  return 1;
+}
-- 
2.18.0

---
 docs/nbdkit-captive.pod                       |  4 ++--
 docs/nbdkit-plugin.pod                        |  2 +-
 docs/nbdkit-service.pod                       |  2 +-
 docs/nbdkit-tls.pod                           |  2 +-
 filters/cow/nbdkit-cow-filter.pod             |  4 ++--
 filters/delay/nbdkit-delay-filter.pod         |  2 +-
 filters/error/nbdkit-error-filter.pod         |  6 +++---
 filters/fua/nbdkit-fua-filter.pod             |  8 ++++----
 filters/log/nbdkit-log-filter.pod             |  4 ++--
 filters/nozero/nbdkit-nozero-filter.pod       |  4 ++--
 filters/offset/nbdkit-offset-filter.pod       |  4 ++--
 filters/partition/nbdkit-partition-filter.pod |  2 +-
 plugins/file/file.c                           |  1 +
 plugins/file/nbdkit-file-plugin.pod           |  7 ++++++-
 tests/test-blocksize.sh                       |  4 ++--
 tests/test-cache.sh                           |  2 +-
 tests/test-cow.sh                             |  2 +-
 tests/test-file-block.c                       |  3 +--
 tests/test-file.c                             |  2 +-
 tests/test-fua.sh                             |  8 ++++----
 tests/test-log.sh                             |  2 +-
 tests/test-nbd.c                              |  2 +-
 tests/test-newstyle.c                         |  2 +-
 tests/test-nozero.sh                          | 10 +++++-----
 tests/test-offset.c                           |  2 +-
 tests/test-oldstyle.c                         |  2 +-
 tests/test-parallel-file.sh                   |  4 ++--
 tests/test-parallel-nbd.sh                    |  2 +-
 tests/test-partition.c                        |  2 +-
 tests/test-single.sh                          |  2 +-
 30 files changed, 54 insertions(+), 49 deletions(-)

diff --git a/docs/nbdkit-captive.pod b/docs/nbdkit-captive.pod
index 6db9520..340374f 100644
--- a/docs/nbdkit-captive.pod
+++ b/docs/nbdkit-captive.pod
@@ -26,7 +26,7 @@ Some examples should make this clear.
 
 To run nbdkit captive under qemu:
 
- nbdkit file file=disk.img --run 'qemu -drive file=$nbd,if=virtio'
+ nbdkit file disk.img --run 'qemu -drive file=$nbd,if=virtio'
 
 On the qemu command line, C<$nbd> is substituted automatically with
 the right NBD path so it can connect to nbdkit.  When qemu exits,
@@ -34,7 +34,7 @@ nbdkit is killed and cleaned up automatically.
 
 Running nbdkit captive under guestfish:
 
- nbdkit file file=disk.img --run 'guestfish --format=raw -a $nbd -i'
+ nbdkit file disk.img --run 'guestfish --format=raw -a $nbd -i'
 
 When guestfish exits, nbdkit is killed.
 
diff --git a/docs/nbdkit-plugin.pod b/docs/nbdkit-plugin.pod
index b37cac1..665f7e2 100644
--- a/docs/nbdkit-plugin.pod
+++ b/docs/nbdkit-plugin.pod
@@ -267,7 +267,7 @@ an indication of failure.  It has the following prototype:
 The server usually (not always) changes directory to C</> before it
 starts serving connections.  This means that any relative paths passed
 during configuration will not work when the server is running
-(example: S<C<nbdkit plugin.so file=disk.img>>).
+(example: S<C<nbdkit plugin.so disk.img>>).
 
 To avoid problems, prepend relative paths with the current directory
 before storing them in the handle.  Or open files and store the file
diff --git a/docs/nbdkit-service.pod b/docs/nbdkit-service.pod
index 956b4ab..c0d275f 100644
--- a/docs/nbdkit-service.pod
+++ b/docs/nbdkit-service.pod
@@ -45,7 +45,7 @@ Also create a service unit (eg.
C</etc/systemd/system/nbdkit.service>)
 containing:
 
  [Service]
- ExecStart=/usr/sbin/nbdkit file file=/path/to/serve
+ ExecStart=/usr/sbin/nbdkit file /path/to/serve
 
 For more information on systemd and socket activation, see
 L<http://0pointer.de/blog/projects/socket-activation.html>
diff --git a/docs/nbdkit-tls.pod b/docs/nbdkit-tls.pod
index 2e70739..ecca87a 100644
--- a/docs/nbdkit-tls.pod
+++ b/docs/nbdkit-tls.pod
@@ -194,7 +194,7 @@ client which can read this file will be able to connect to
the server.
 
 Use the nbdkit I<--tls-psk> option to start the server:
 
- nbdkit --tls=require --tls-psk=/tmp/keys/keys.psk -e / file file=disk.img
+ nbdkit --tls=require --tls-psk=/tmp/keys/keys.psk -e / file disk.img
 
 This option overrides X.509 certificate authentication.
 
diff --git a/filters/cow/nbdkit-cow-filter.pod
b/filters/cow/nbdkit-cow-filter.pod
index ed48f2b..80100e7 100644
--- a/filters/cow/nbdkit-cow-filter.pod
+++ b/filters/cow/nbdkit-cow-filter.pod
@@ -59,7 +59,7 @@ normal way.
 Serve the file F<disk.img>, allowing writes, but do not save any
 changes into the file:
 
- nbdkit --filter=cow file file=disk.img
+ nbdkit --filter=cow file disk.img
 
 L<nbdkit-xz-plugin(1)> only supports read access, but you can provide
 temporary write access by doing (although this does B<not> save
@@ -76,7 +76,7 @@ otherwise all changes will be lost>.
 
 Run nbdkit:
 
- nbdkit --filter=cow file file=disk.img
+ nbdkit --filter=cow file disk.img
 
 and then connect with a client and make whatever changes you need.
 At the end, disconnect the client.
diff --git a/filters/delay/nbdkit-delay-filter.pod
b/filters/delay/nbdkit-delay-filter.pod
index 3bfb039..62c0093 100644
--- a/filters/delay/nbdkit-delay-filter.pod
+++ b/filters/delay/nbdkit-delay-filter.pod
@@ -16,7 +16,7 @@ remote server, or to test certain kinds of race conditions in
Linux.
 
 =head1 EXAMPLE
 
- nbdkit --filter=delay file file=disk.img rdelay=100ms wdelay=100ms
+ nbdkit --filter=delay file disk.img rdelay=100ms wdelay=100ms
 
 =head1 PARAMETERS
 
diff --git a/filters/error/nbdkit-error-filter.pod
b/filters/error/nbdkit-error-filter.pod
index 0f02282..76003c7 100644
--- a/filters/error/nbdkit-error-filter.pod
+++ b/filters/error/nbdkit-error-filter.pod
@@ -27,12 +27,12 @@ B<otherwise this filter will do nothing>.
 
 Inject a low rate of errors randomly into the connection:
 
- nbdkit --filter=error file file=disk.img error-rate=1%
+ nbdkit --filter=error file disk.img error-rate=1%
 
 Reading and trimming requests will be successful, but all
 writes and zeroing will return "No space left on device":
 
- nbdkit --filter=error file file=disk.img \
+ nbdkit --filter=error file disk.img \
                             error=ENOSPC \
                             error-pwrite-rate=100% \
                             error-zero-rate=100%
@@ -41,7 +41,7 @@ To make all connections fail hard 60 seconds after the server
is
 started, use:
 
  rm -f /tmp/inject
- nbdkit --filter=error file file=disk.img \
+ nbdkit --filter=error file disk.img \
                             error-rate=100% \
                             error-file=/tmp/inject
  sleep 60; touch /tmp/inject
diff --git a/filters/fua/nbdkit-fua-filter.pod
b/filters/fua/nbdkit-fua-filter.pod
index 8822a45..e0b3c4d 100644
--- a/filters/fua/nbdkit-fua-filter.pod
+++ b/filters/fua/nbdkit-fua-filter.pod
@@ -42,23 +42,23 @@ C<NBDKIT_FUA_NONE>).
 Serve the file F<disk.img>, but force the client to submit explicit
 flush requests instead of using C<NBD_CMD_FLAG_FUA>:
 
- nbdkit --filter=fua file file=disk.img
+ nbdkit --filter=fua file disk.img
 
 Observe that the blocksize filter optimizes its handling of the FUA
 flag based on whether it knows nbdkit will be emulating FUA with a
 flush, by comparing the log filter output on top of different fua
 filter modes:
 
- nbdkit --filter=blocksize --filter=log --filter=fua file file=disk.img \
+ nbdkit --filter=blocksize --filter=log --filter=fua file disk.img \
    maxlen=4k logfile=fua_emulated fuamode=emulate
- nbdkit --filter=blocksize --filter=log --filter=fua file file=disk.img \
+ nbdkit --filter=blocksize --filter=log --filter=fua file disk.img \
    maxlen=4k logfile=fua_native fuamode=native
 
 Serve the file F<disk.img> in write-through mode, where all writes
 from the client are immediately flushed to disk as if the client had
 always requested FUA:
 
- nbdkit --filter=fua file fuamode=force file=disk.img
+ nbdkit --filter=fua file fuamode=force disk.img
 
 =head1 SEE ALSO
 
diff --git a/filters/log/nbdkit-log-filter.pod
b/filters/log/nbdkit-log-filter.pod
index 89ea551..0903329 100644
--- a/filters/log/nbdkit-log-filter.pod
+++ b/filters/log/nbdkit-log-filter.pod
@@ -29,12 +29,12 @@ already exists, it will be truncated.
 Serve the file F<disk.img>, and log each client transaction in the
 file F<disk.log>:
 
- nbdkit --filter=log file file=disk.img logfile=disk.log
+ nbdkit --filter=log file disk.img logfile=disk.log
 
 Repeat the task, but with the cow (copy-on-write) filter to perform
 local caching of data served from the original plugin:
 
- nbdkit --filter=cow --filter=log file file=disk.img logfile=disk.log2
+ nbdkit --filter=cow --filter=log file disk.img logfile=disk.log2
 
 After running a client that performs the same operations under each of
 the two servers, you can compare F<disk.log> and F<disk.log2> to
see
diff --git a/filters/nozero/nbdkit-nozero-filter.pod
b/filters/nozero/nbdkit-nozero-filter.pod
index 1301432..715605f 100644
--- a/filters/nozero/nbdkit-nozero-filter.pod
+++ b/filters/nozero/nbdkit-nozero-filter.pod
@@ -34,13 +34,13 @@ way to write zeros.
 Serve the file F<disk.img>, but force the client to write zeroes
 explicitly rather than with C<NBD_CMD_WRITE_ZEROES>:
 
- nbdkit --filter=nozero file file=disk.img
+ nbdkit --filter=nozero file disk.img
 
 Serve the file F<disk.img>, allowing the client to take advantage of
 less network traffic via C<NBD_CMD_WRITE_ZEROES>, but still forcing
 the data to be written explicitly rather than punching any holes:
 
- nbdkit --filter=nozero file zeromode=emulate file=disk.img
+ nbdkit --filter=nozero file zeromode=emulate disk.img
 
 =head1 SEE ALSO
 
diff --git a/filters/offset/nbdkit-offset-filter.pod
b/filters/offset/nbdkit-offset-filter.pod
index 61496d2..a232e46 100644
--- a/filters/offset/nbdkit-offset-filter.pod
+++ b/filters/offset/nbdkit-offset-filter.pod
@@ -44,7 +44,7 @@ Using L<nbdkit-file-plugin(1)>, serve the file
C<disk.img> starting at
 offset C<1M>.  The total length served is C<100M> (the underlying
file
 must therefore be at least C<101M> in length):
 
- nbdkit --filter=offset file file=disk.img offset=1M range=100M
+ nbdkit --filter=offset file disk.img offset=1M range=100M
 
 =head2 Serve a single partition
 
@@ -60,7 +60,7 @@ and length of the partition, eg using:
 
 You can then serve the partition only using:
 
- nbdkit --filter=offset file file=disk.img offset=65536 range=104727040
+ nbdkit --filter=offset file disk.img offset=65536 range=104727040
 
 =head1 SEE ALSO
 
diff --git a/filters/partition/nbdkit-partition-filter.pod
b/filters/partition/nbdkit-partition-filter.pod
index 0256e52..ae72f3f 100644
--- a/filters/partition/nbdkit-partition-filter.pod
+++ b/filters/partition/nbdkit-partition-filter.pod
@@ -38,7 +38,7 @@ This parameter is required.
 F<disk.img> is a partitioned disk image (eg. a virtual machine disk
 image).  To serve the first partition only use:
 
- nbdkit --filter=partition file file=disk.img partition=1
+ nbdkit --filter=partition file disk.img partition=1
 
 =head1 SEE ALSO
 
diff --git a/plugins/file/file.c b/plugins/file/file.c
index e7cbff6..9d03f18 100644
--- a/plugins/file/file.c
+++ b/plugins/file/file.c
@@ -476,6 +476,7 @@ static struct nbdkit_plugin plugin = {
   .config            = file_config,
   .config_complete   = file_config_complete,
   .config_help       = file_config_help,
+  .magic_config_key  = "file",
   .dump_plugin       = file_dump_plugin,
   .open              = file_open,
   .close             = file_close,
diff --git a/plugins/file/nbdkit-file-plugin.pod
b/plugins/file/nbdkit-file-plugin.pod
index b2c25d1..f8fe74c 100644
--- a/plugins/file/nbdkit-file-plugin.pod
+++ b/plugins/file/nbdkit-file-plugin.pod
@@ -4,7 +4,7 @@ nbdkit-file-plugin - nbdkit file plugin
 
 =head1 SYNOPSIS
 
- nbdkit file file=FILENAME
+ nbdkit file FILENAME
 
 =head1 DESCRIPTION
 
@@ -26,6 +26,11 @@ be used here.
 
 This parameter is required.
 
+In nbdkit E<ge> 1.7, C<file=> may be omitted.  To ensure that the
+filename does not end up being parsed accidentally as C<key=value>,
+prefix relative paths with C<./> (absolute paths do not need
+modification).
+
 =item B<rdelay>
 
 =item B<wdelay>
diff --git a/tests/test-blocksize.sh b/tests/test-blocksize.sh
index d239c9b..cb9b09f 100755
--- a/tests/test-blocksize.sh
+++ b/tests/test-blocksize.sh
@@ -73,9 +73,9 @@ trap cleanup INT QUIT TERM EXIT ERR
 
 # Run two parallel nbdkit; to compare the logs and see what changes.
 nbdkit -P blocksize1.pid -U blocksize1.sock \
-       --filter=log file logfile=blocksize1.log file=blocksize1.img
+       --filter=log file logfile=blocksize1.log blocksize1.img
 nbdkit -P blocksize2.pid -U blocksize2.sock --filter=blocksize \
-       --filter=log file logfile=blocksize2.log file=blocksize2.img \
+       --filter=log file logfile=blocksize2.log blocksize2.img \
        minblock=1024 maxdata=512k maxlen=1M
 
 # We may have to wait a short time for the pid files to appear.
diff --git a/tests/test-cache.sh b/tests/test-cache.sh
index 6f058b8..215bab1 100755
--- a/tests/test-cache.sh
+++ b/tests/test-cache.sh
@@ -41,7 +41,7 @@ rm -f $files
 truncate -s 1G cache.img
 
 # Run nbdkit with the caching filter.
-nbdkit -P cache.pid -U cache.sock --filter=cache file file=cache.img
+nbdkit -P cache.pid -U cache.sock --filter=cache file cache.img
 
 # We may have to wait a short time for the pid file to appear.
 for i in `seq 1 10`; do
diff --git a/tests/test-cow.sh b/tests/test-cow.sh
index 5bde829..f9b0649 100755
--- a/tests/test-cow.sh
+++ b/tests/test-cow.sh
@@ -42,7 +42,7 @@ guestfish -N cow-base.img=fs exit
 lastmod="$(stat -c "%y" cow-base.img)"
 
 # Run nbdkit with a COW overlay.
-nbdkit -P cow.pid -U cow.sock --filter=cow file file=cow-base.img
+nbdkit -P cow.pid -U cow.sock --filter=cow file cow-base.img
 
 # We may have to wait a short time for the pid file to appear.
 for i in `seq 1 10`; do
diff --git a/tests/test-file-block.c b/tests/test-file-block.c
index f053242..e2ea068 100644
--- a/tests/test-file-block.c
+++ b/tests/test-file-block.c
@@ -124,9 +124,8 @@ main (int argc, char *argv[])
   atexit (detach_loopdev);
 
   /* Start nbdkit. */
-  snprintf (buf, sizeof buf, "file=%s", loopdev);
   if (test_start_nbdkit ("-D", "file.zero=1",
-                         "file", buf, NULL) == -1)
+                         "file", loopdev, NULL) == -1)
     exit (EXIT_FAILURE);
 
   g = guestfs_create ();
diff --git a/tests/test-file.c b/tests/test-file.c
index 65a2568..9382ed2 100644
--- a/tests/test-file.c
+++ b/tests/test-file.c
@@ -52,7 +52,7 @@ main (int argc, char *argv[])
   char *data;
   size_t i, size;
 
-  if (test_start_nbdkit ("file", "file=file-data", NULL) ==
-1)
+  if (test_start_nbdkit ("file", "file-data", NULL) == -1)
     exit (EXIT_FAILURE);
 
   g = guestfs_create ();
diff --git a/tests/test-fua.sh b/tests/test-fua.sh
index 98b1e84..f95aa18 100755
--- a/tests/test-fua.sh
+++ b/tests/test-fua.sh
@@ -84,13 +84,13 @@ trap cleanup INT QUIT TERM EXIT ERR
 # 3: fuamode=native: log shows that blocksize preserves fua
 # 4: fuamode=force: log shows that fua is always enabled
 nbdkit -P fua1.pid -U fua1.sock --filter=log --filter=fua \
-       file logfile=fua1.log file=fua.img
+       file logfile=fua1.log fua.img
 nbdkit -P fua2.pid -U fua2.sock --filter=blocksize --filter=log --filter=fua \
-       file logfile=fua2.log file=fua.img fuamode=emulate maxdata=4k maxlen=4k
+       file logfile=fua2.log fua.img fuamode=emulate maxdata=4k maxlen=4k
 nbdkit -P fua3.pid -U fua3.sock --filter=blocksize --filter=log --filter=fua \
-       file logfile=fua3.log file=fua.img fuamode=native maxdata=4k maxlen=4k
+       file logfile=fua3.log fua.img fuamode=native maxdata=4k maxlen=4k
 nbdkit -P fua4.pid -U fua4.sock --filter=fua --filter=log \
-       file logfile=fua4.log file=fua.img fuamode=force
+       file logfile=fua4.log fua.img fuamode=force
 
 # We may have to wait a short time for the pid files to appear.
 for i in `seq 1 10`; do
diff --git a/tests/test-log.sh b/tests/test-log.sh
index 877f9cc..f811de4 100755
--- a/tests/test-log.sh
+++ b/tests/test-log.sh
@@ -44,7 +44,7 @@ if ! qemu-io -f raw -c 'w 1M 2M' log.img; then
 fi
 
 # Run nbdkit with logging enabled to file.
-nbdkit -P log.pid -U log.sock --filter=log file file=log.img logfile=log.log
+nbdkit -P log.pid -U log.sock --filter=log file log.img logfile=log.log
 
 # We may have to wait a short time for the pid file to appear.
 for i in `seq 1 10`; do
diff --git a/tests/test-nbd.c b/tests/test-nbd.c
index 646c0c3..a09a0d5 100644
--- a/tests/test-nbd.c
+++ b/tests/test-nbd.c
@@ -55,7 +55,7 @@ main (int argc, char *argv[])
 
   /* If wrapping once is good, why not do it twice!  Shows that we can
    * convert between either style of server options. */
-  if (test_start_nbdkit ("-o", "file",
"file=file-data", NULL) == -1)
+  if (test_start_nbdkit ("-o", "file",
"file-data", NULL) == -1)
     exit (EXIT_FAILURE);
 
   if (asprintf (&sockarg, "socket=%s", sock) < 0) {
diff --git a/tests/test-newstyle.c b/tests/test-newstyle.c
index cd0ba72..cadccec 100644
--- a/tests/test-newstyle.c
+++ b/tests/test-newstyle.c
@@ -55,7 +55,7 @@ main (int argc, char *argv[])
   size_t i, size;
 
   if (test_start_nbdkit ("-e", EXPORTNAME,
-                         "-n", "file",
"file=file-data", NULL) == -1)
+                         "-n", "file",
"file-data", NULL) == -1)
     exit (EXIT_FAILURE);
 
   g = guestfs_create ();
diff --git a/tests/test-nozero.sh b/tests/test-nozero.sh
index 781b196..904d822 100755
--- a/tests/test-nozero.sh
+++ b/tests/test-nozero.sh
@@ -102,15 +102,15 @@ trap cleanup INT QUIT TERM EXIT ERR
 # 5a/b: both sides of nbd plugin: even though server side does not advertise
 # ZERO, the client side still exposes it, and just skips calling nbd's
.zero
 nbdkit -P nozero1.pid -U nozero1.sock --filter=log \
-       file logfile=nozero1.log file=nozero1.img
+       file logfile=nozero1.log nozero1.img
 nbdkit -P nozero2.pid -U nozero2.sock --filter=log --filter=nozero \
-       file logfile=nozero2.log file=nozero2.img
+       file logfile=nozero2.log nozero2.img
 nbdkit -P nozero3.pid -U nozero3.sock --filter=log --filter=nozero \
-       file logfile=nozero3.log file=nozero3.img zeromode=emulate
+       file logfile=nozero3.log nozero3.img zeromode=emulate
 nbdkit -P nozero4.pid -U nozero4.sock --filter=nozero --filter=log \
-       file logfile=nozero4.log file=nozero4.img zeromode=emulate
+       file logfile=nozero4.log nozero4.img zeromode=emulate
 nbdkit -P nozero5a.pid -U nozero5a.sock --filter=log --filter=nozero \
-       file logfile=nozero5a.log file=nozero5.img
+       file logfile=nozero5a.log nozero5.img
 nbdkit -P nozero5b.pid -U nozero5b.sock --filter=log \
        nbd logfile=nozero5b.log socket=nozero5a.sock
 
diff --git a/tests/test-offset.c b/tests/test-offset.c
index d47066f..a7f467f 100644
--- a/tests/test-offset.c
+++ b/tests/test-offset.c
@@ -78,7 +78,7 @@ main (int argc, char *argv[])
    * has not been overwritten.
    */
   if (test_start_nbdkit ("--filter", "offset",
-                         "file", "file=offset-data",
+                         "file", "offset-data",
                          "offset=1M", "range=8M",
                          NULL) == -1)
     exit (EXIT_FAILURE);
diff --git a/tests/test-oldstyle.c b/tests/test-oldstyle.c
index bcffbe4..b3f3c4e 100644
--- a/tests/test-oldstyle.c
+++ b/tests/test-oldstyle.c
@@ -52,7 +52,7 @@ main (int argc, char *argv[])
   char *data;
   size_t i, size;
 
-  if (test_start_nbdkit ("-o", "file",
"file=file-data", NULL) == -1)
+  if (test_start_nbdkit ("-o", "file",
"file-data", NULL) == -1)
     exit (EXIT_FAILURE);
 
   g = guestfs_create ();
diff --git a/tests/test-parallel-file.sh b/tests/test-parallel-file.sh
index fdc8a1b..fd88faa 100755
--- a/tests/test-parallel-file.sh
+++ b/tests/test-parallel-file.sh
@@ -56,7 +56,7 @@ qemu-io -f raw -c "aio_write -P 1 0 512" -c
"aio_write -P 2 512 512" \
 # tuning the delays may help.
 
 # With --threads=1, the write should complete first because it was issued first
-nbdkit -v -t 1 -U - --filter=delay file file=test-parallel-file.data \
+nbdkit -v -t 1 -U - --filter=delay file test-parallel-file.data \
   wdelay=2 rdelay=1 --run 'qemu-io -f raw -c "aio_write -P 2 512
512" \
                            -c "aio_read -P 1 0 512" -c aio_flush
$nbd' |
     tee test-parallel-file.out
@@ -67,7 +67,7 @@ read 512/512 bytes at offset 0"; then
 fi
 
 # With default --threads, the faster read should complete first
-nbdkit -v -U - --filter=delay file file=test-parallel-file.data \
+nbdkit -v -U - --filter=delay file test-parallel-file.data \
   wdelay=2 rdelay=1 --run 'qemu-io -f raw -c "aio_write -P 2 512
512" \
                            -c "aio_read -P 1 0 512" -c aio_flush
$nbd' |
     tee test-parallel-file.out
diff --git a/tests/test-parallel-nbd.sh b/tests/test-parallel-nbd.sh
index e793c11..cb70f46 100755
--- a/tests/test-parallel-nbd.sh
+++ b/tests/test-parallel-nbd.sh
@@ -64,7 +64,7 @@ qemu-io -f raw -c "aio_write -P 1 0 512" -c
"aio_write -P 2 512 512" \
 nbdkit --exit-with-parent -v \
     -U test-parallel-nbd.sock -P test-parallel-nbd.pid \
     --filter=delay \
-    file file=test-parallel-nbd.data wdelay=2 rdelay=1 &
+    file test-parallel-nbd.data wdelay=2 rdelay=1 &
 # We may have to wait a short time for the pid file to appear.
 for i in `seq 1 10`; do
     if test -f test-parallel-nbd.pid; then
diff --git a/tests/test-partition.c b/tests/test-partition.c
index 0087548..1064293 100644
--- a/tests/test-partition.c
+++ b/tests/test-partition.c
@@ -53,7 +53,7 @@ main (int argc, char *argv[])
 
   if (test_start_nbdkit ("-r",
                          "--filter", "partition",
-                         "file", "file=disk",
+                         "file", "disk",
                          "partition=1",
                          NULL) == -1)
     exit (EXIT_FAILURE);
diff --git a/tests/test-single.sh b/tests/test-single.sh
index dc6ce34..35017c8 100755
--- a/tests/test-single.sh
+++ b/tests/test-single.sh
@@ -51,7 +51,7 @@ rm -f $files
 truncate -s 1G single.disk
 
 socat unix-listen:single.sock,reuseaddr,fork \
-    exec:'nbdkit -r -s file file=single.disk' &
+    exec:'nbdkit -r -s file single.disk' &
 pid=$!
 
 cleanup ()
-- 
2.18.0

---
 plugins/split/nbdkit-split-plugin.pod | 9 +++++++--
 plugins/split/split.c                 | 3 ++-
 tests/test-split.c                    | 3 ++-
 3 files changed, 11 insertions(+), 4 deletions(-)

diff --git a/plugins/split/nbdkit-split-plugin.pod
b/plugins/split/nbdkit-split-plugin.pod
index 6a6a01a..bcbbf8f 100644
--- a/plugins/split/nbdkit-split-plugin.pod
+++ b/plugins/split/nbdkit-split-plugin.pod
@@ -4,12 +4,12 @@ nbdkit-split-plugin - nbdkit plugin to concatenate split files
into one disk
 
 =head1 SYNOPSIS
 
- nbdkit split file=file1 [file=file2 file=file3 ...]
+ nbdkit split file1 [file2 file3 ...]
 
 =head1 DESCRIPTION
 
 C<nbdkit-split-plugin> is a file plugin for L<nbdkit(1)>.  One or
more
-filenames may be given using the C<file=FILENAME> parameter.  These
+filenames may be given using the C<FILENAME> parameter.  These
 files are logically concatenated into a single disk image.
 
 =head2 Differences from nbdkit-file-plugin
@@ -62,6 +62,11 @@ the order they appear on the command line.
 
 This parameter must appear at least once.
 
+In nbdkit E<ge> 1.7, C<file=> may be omitted.  To ensure that the
+filename does not end up being parsed accidentally as C<key=value>,
+prefix relative paths with C<./> (absolute paths do not need
+modification).
+
 =back
 
 =head1 SEE ALSO
diff --git a/plugins/split/split.c b/plugins/split/split.c
index bdcdcf7..7572316 100644
--- a/plugins/split/split.c
+++ b/plugins/split/split.c
@@ -1,5 +1,5 @@
 /* nbdkit
- * Copyright (C) 2017 Red Hat Inc.
+ * Copyright (C) 2017-2018 Red Hat Inc.
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -286,6 +286,7 @@ static struct nbdkit_plugin plugin = {
   .unload            = split_unload,
   .config            = split_config,
   .config_help       = split_config_help,
+  .magic_config_key  = "file",
   .open              = split_open,
   .close             = split_close,
   .get_size          = split_get_size,
diff --git a/tests/test-split.c b/tests/test-split.c
index f20e64b..c4f2a74 100644
--- a/tests/test-split.c
+++ b/tests/test-split.c
@@ -53,7 +53,8 @@ main (int argc, char *argv[])
   size_t i, size;
 
   if (test_start_nbdkit ("split",
-                         "file=split1", "file=split2",
"file=split3",
+                         "split1", "split2",
+                         "file=split3" /* leave file= to test */,
                          NULL) == -1)
     exit (EXIT_FAILURE);
 
-- 
2.18.0

---
 plugins/gzip/gzip.c                 |  3 ++-
 plugins/gzip/nbdkit-gzip-plugin.pod | 19 ++++++++++++++++++-
 2 files changed, 20 insertions(+), 2 deletions(-)

diff --git a/plugins/gzip/gzip.c b/plugins/gzip/gzip.c
index 09dd629..26d5e3c 100644
--- a/plugins/gzip/gzip.c
+++ b/plugins/gzip/gzip.c
@@ -1,5 +1,5 @@
 /* nbdkit
- * Copyright (C) 2013 Red Hat Inc.
+ * Copyright (C) 2013-2018 Red Hat Inc.
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -217,6 +217,7 @@ static struct nbdkit_plugin plugin = {
   .config            = gzip_config,
   .config_complete   = gzip_config_complete,
   .config_help       = gzip_config_help,
+  .magic_config_key  = "file",
   .open              = gzip_open,
   .close             = gzip_close,
   .get_size          = gzip_get_size,
diff --git a/plugins/gzip/nbdkit-gzip-plugin.pod
b/plugins/gzip/nbdkit-gzip-plugin.pod
index a5f6b79..68dbf45 100644
--- a/plugins/gzip/nbdkit-gzip-plugin.pod
+++ b/plugins/gzip/nbdkit-gzip-plugin.pod
@@ -4,7 +4,7 @@ nbdkit-gzip-plugin - nbdkit gzip plugin
 
 =head1 SYNOPSIS
 
- nbdkit gzip file=FILENAME.gz
+ nbdkit gzip FILENAME.gz
 
 =head1 DESCRIPTION
 
@@ -18,6 +18,23 @@ files because seeking to a position in the gzip file involves
 uncompressing lots of data.  A more practical method to compress large
 disk images is to use the L<xz(1)> format and
L<nbdkit-xz-plugin(1)>.
 
+=head1 PARAMETERS
+
+=over 4
+
+=item B<file=>FILENAME.gz
+
+Serve the compressed file named C<FILENAME.gz>.
+
+This parameter is required.
+
+In nbdkit E<ge> 1.7, C<file=> may be omitted.  To ensure that the
+filename does not end up being parsed accidentally as C<key=value>,
+prefix relative paths with C<./> (absolute paths do not need
+modification).
+
+=back
+
 =head1 SEE ALSO
 
 L<nbdkit-xz-plugin(1)>,
-- 
2.18.0

---
 docs/nbdkit.pod                   | 8 ++++----
 filters/cow/nbdkit-cow-filter.pod | 2 +-
 plugins/xz/nbdkit-xz-plugin.pod   | 5 +++++
 plugins/xz/xz.c                   | 3 ++-
 tests/test-xz.c                   | 2 +-
 5 files changed, 13 insertions(+), 7 deletions(-)

diff --git a/docs/nbdkit.pod b/docs/nbdkit.pod
index cf1c5ca..d650283 100644
--- a/docs/nbdkit.pod
+++ b/docs/nbdkit.pod
@@ -75,7 +75,7 @@ Serve only the first partition from compressed disk image
 F<disk.img.xz>, combining L<nbdkit-xz-plugin(1)> and
 L<nbdkit-partition-filter(1)>:
 
- nbdkit --filter=partition  xz file=disk.img.xz  partition=1
+ nbdkit --filter=partition  xz disk.img.xz  partition=1
 
 To understand this command line:
 
@@ -83,9 +83,9 @@ To understand this command line:
                                   │
                             ┌─────┴────┐
                             │          │
- nbdkit --filter=partition  xz file=disk.img.xz  partition=1
-                │                                   │
-                └───────────────┬───────────────────┘
+ nbdkit --filter=partition  xz disk.img.xz  partition=1
+                  │                               │
+                  └─────────────┬─────────────────┘
                                 │
                 filter name and filter parameter
 
diff --git a/filters/cow/nbdkit-cow-filter.pod
b/filters/cow/nbdkit-cow-filter.pod
index 80100e7..d5cd735 100644
--- a/filters/cow/nbdkit-cow-filter.pod
+++ b/filters/cow/nbdkit-cow-filter.pod
@@ -65,7 +65,7 @@ L<nbdkit-xz-plugin(1)> only supports read access, but
you can provide
 temporary write access by doing (although this does B<not> save
 changes to the file):
 
- nbdkit --filter=cow xz file=disk.xz
+ nbdkit --filter=cow xz disk.xz
 
 =head1 CREATING A DIFF WITH QEMU-IMG
 
diff --git a/plugins/xz/nbdkit-xz-plugin.pod b/plugins/xz/nbdkit-xz-plugin.pod
index 2c9ab6e..59b2bd7 100644
--- a/plugins/xz/nbdkit-xz-plugin.pod
+++ b/plugins/xz/nbdkit-xz-plugin.pod
@@ -59,6 +59,11 @@ Serve the file named C<FILENAME.xz>.
 
 This parameter is required.
 
+In nbdkit E<ge> 1.7, C<file=> may be omitted.  To ensure that the
+filename does not end up being parsed accidentally as C<key=value>,
+prefix relative paths with C<./> (absolute paths do not need
+modification).
+
 =item B<maxblock=>SIZE
 
 The maximum block size that the plugin will read.  The plugin will
diff --git a/plugins/xz/xz.c b/plugins/xz/xz.c
index f45e489..a88d713 100644
--- a/plugins/xz/xz.c
+++ b/plugins/xz/xz.c
@@ -1,5 +1,5 @@
 /* nbdkit
- * Copyright (C) 2013 Red Hat Inc.
+ * Copyright (C) 2013-2018 Red Hat Inc.
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -250,6 +250,7 @@ static struct nbdkit_plugin plugin = {
   .config            = xz_config,
   .config_complete   = xz_config_complete,
   .config_help       = xz_config_help,
+  .magic_config_key  = "file",
   .open              = xz_open,
   .close             = xz_close,
   .get_size          = xz_get_size,
diff --git a/tests/test-xz.c b/tests/test-xz.c
index ef58d59..46b1d04 100644
--- a/tests/test-xz.c
+++ b/tests/test-xz.c
@@ -51,7 +51,7 @@ main (int argc, char *argv[])
   int r;
   char *data;
 
-  if (test_start_nbdkit ("xz", "-r",
"file=disk.xz", NULL) == -1)
+  if (test_start_nbdkit ("xz", "-r", "disk.xz",
NULL) == -1)
     exit (EXIT_FAILURE);
 
   g = guestfs_create ();
-- 
2.18.0

On 09/08/2018 03:15 AM, Richard W.M. Jones wrote:
> Previously key=value on the command line allowed the key to be pretty
> much anything that didn't contain an '=' character.  Even empty
> strings were permitted.
> 
> This tightens up the permitted keys so they must contain only ASCII
> alphanumeric, period, underscore or dash characters, and must not be
> an empty string.
Do we want to further restrict things to start with a letter or 
underscore (and not a dot, digit, or dash)?
> ---
>   docs/nbdkit-plugin.pod | 18 ++++++++++--------
>   src/main.c             | 32 +++++++++++++++++++++++++++++++-
>   2 files changed, 41 insertions(+), 9 deletions(-)
> 
> +static int
> +is_config_key (const char *key, size_t len)
> +{
> +  const char allowed[] > +    "abcdefghijklmnopqrstuvwxyz"
> +    "ABCDEFGHIJKLMNOPQRSTUVWXYZ"
> +    "0123456789"
> +    "._-";
> +  size_t i;
> +
> +  if (key[0] == '\0')
> +    return 0;
> +
> +  for (i = 0; i < len; ++i) {
> +    if (strchr (allowed, key[i]) == NULL)
Why not use strspn and checking against the length, instead of rolling 
an O(n^2) algorithm yourself?  The libc version might have optimizations 
to run faster, although the speed of this loop is probably in the noise.

-- 
Eric Blake, Principal Software Engineer
Red Hat, Inc.           +1-919-301-3266
Virtualization:  qemu.org | libvirt.org

On 09/08/2018 03:15 AM, Richard W.M. Jones wrote:
> ---
> +++ b/plugins/file/nbdkit-file-plugin.pod
> @@ -4,7 +4,7 @@ nbdkit-file-plugin - nbdkit file plugin
>   
>   =head1 SYNOPSIS
>   
> - nbdkit file file=FILENAME
> + nbdkit file FILENAME
>   
>   =head1 DESCRIPTION
>   
> @@ -26,6 +26,11 @@ be used here.
>   
>   This parameter is required.
>   
> +In nbdkit E<ge> 1.7, C<file=> may be omitted.  To ensure that
the
Since you released 1.7.0 without this series, you'll need to tweak this 
wording.
> +filename does not end up being parsed accidentally as C<key=value>,
> +prefix relative paths with C<./> (absolute paths do not need
> +modification).
> +
>   =item B<rdelay>
>   

-- 
Eric Blake, Principal Software Engineer
Red Hat, Inc.           +1-919-301-3266
Virtualization:  qemu.org | libvirt.org