Help me ... I try use the tc filter, but seems he doesn''t work, I already reconfigured my kernel ( 2.4.32 ) with all options related a QOS enabled ( like modules ) and nothing happens. I get the tc tool from HTB source package, well this is my set : eth0 is my internal NIC. tc qdisc add dev eth0 root handle 1: htb default 12 tc class add dev eth0 parent 1: classid 1:1 htb rate 100kbps ceil 100kbps tc class add dev eth0 parent 1:1 classid 1:10 htb rate 30kbps ceil 100kbps tc class add dev eth0 parent 1:1 classid 1:11 htb rate 10kbps ceil 100kbps tc class add dev eth0 parent 1:1 classid 1:12 htb rate 60kbps ceil 100kbps tc filter add dev eth0 protocol ip parent 1:0 prio 1 u32 match ip src flowid 1:10 tc qdisc add dev eth0 parent handle 20: pfifo limit 5 tc qdisc add dev eth0 parent handle 30: pfifo limit 5 tc qdisc add dev eth0 parent handle 40: sfq perturb 10 OK. but ... when I look the qdiscs tc -s -d qdisc qdisc htb 1: r2q 10 default 12 direct_packets_stat 411 ver 3.17 Sent 181174 bytes 1324 pkts (dropped 0, overlimits 0) qdisc pfifo 20: parent 1:10 limit 5p Sent 0 bytes 0 pkts (dropped 0, overlimits 0) qdisc pfifo 30: parent 1:11 limit 5p Sent 0 bytes 0 pkts (dropped 0, overlimits 0) qdisc sfq 40: parent 1:12 quantum 1514b limit 128p flows 128/1024 perturb 10sec Sent 130091 bytes 866 pkts (dropped 0, overlimits 0) All traffic is going to default class ( 1:12 ), I try many filters with tc tool but nothing happens. I look the modules with lsmod and "cls_u32.o" and "sch_htb.o" is all loaded. Thanks everyone. _______________________________________________ LARTC mailing list LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
> d3xcrIpt wrote: > > Help me ... > > I try use the tc filter, but seems he doesn''t work, I already > reconfigured my kernel ( 2.4.32 ) with all options related a QOS > enabled ( like modules ) and nothing happens. I get the tc tool from > HTB source package, well this is my set : > > eth0 is my internal NIC. > > tc qdisc add dev eth0 root handle 1: htb default 12 > > tc class add dev eth0 parent 1: classid 1:1 htb rate 100kbps ceil > 100kbps > tc class add dev eth0 parent 1:1 classid 1:10 htb rate 30kbps ceil > 100kbps > tc class add dev eth0 parent 1:1 classid 1:11 htb rate 10kbps ceil > 100kbps > tc class add dev eth0 parent 1:1 classid 1:12 htb rate 60kbps ceil > 100kbps > > tc filter add dev eth0 protocol ip parent 1:0 prio 1 u32 match ip src > <my_ip> flowid 1:10 > > tc qdisc add dev eth0 parent handle 20: pfifo limit 5 > tc qdisc add dev eth0 parent handle 30: pfifo limit 5 > tc qdisc add dev eth0 parent handle 40: sfq perturb 10 > > OK. but ... when I look the qdiscs > > tc -s -d qdisc > qdisc htb 1: r2q 10 default 12 direct_packets_stat 411 ver 3.17 > Sent 181174 bytes 1324 pkts (dropped 0, overlimits 0) > > qdisc pfifo 20: parent 1:10 limit 5p > Sent 0 bytes 0 pkts (dropped 0, overlimits 0) > > qdisc pfifo 30: parent 1:11 limit 5p > Sent 0 bytes 0 pkts (dropped 0, overlimits 0) > > qdisc sfq 40: parent 1:12 quantum 1514b limit 128p flows 128/1024 > perturb 10sec > Sent 130091 bytes 866 pkts (dropped 0, overlimits 0) > > All traffic is going to default class ( 1:12 ), I try many filters > with tc tool but nothing happens. > I look the modules with lsmod and "cls_u32.o" and "sch_htb.o" is all > loaded. > > Thanks everyone."u32 match ip src <my_ip>" Are you sure your IP isn''t getting NATted somewhere? You can''t match something that is changed! Include a "prio" (non zero) in your filter line. Direct packets are A Bad Thing too. Read Devik''s HTB documentation. -- gypsy