Hello All, I was curious to know if I can do traffic shaping on abonded Interface? Ex: I have to interfaces eth1 and eth2 which i have bonded together as bond0 , now the question is can I do shaping on eth1 and eth2 ?? Thanks KartheeK --------------------------------- Here''s a new way to find what you''re looking for - Yahoo! Answers Send FREE SMS to your friend''s mobile from Yahoo! Messenger Version 8. Get it NOW _______________________________________________ LARTC mailing list LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
Hello All, Has Any body of you worked on such a set up? KartheeK KartheeK <kartheekpn@yahoo.co.in> wrote: Date: Thu, 17 Aug 2006 07:31:25 +0100 (BST) From: KartheeK <kartheekpn@yahoo.co.in> To: lartc@mailman.ds9a.nl Subject: [LARTC] Bonding + Shaping --> Is it Possible? Hello All, I was curious to know if I can do traffic shaping on abonded Interface? Ex: I have to interfaces eth1 and eth2 which i have bonded together as bond0 , now the question is can I do shaping on eth1 and eth2 ?? Thanks KartheeK --------------------------------- Here''s a new way to find what you''re looking for - Yahoo! Answers Send FREE SMS to your friend''s mobile from Yahoo! Messenger Version 8. Get it NOW_______________________________________________ LARTC mailing list LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc --------------------------------- Here''s a new way to find what you''re looking for - Yahoo! Answers Send FREE SMS to your friend''s mobile from Yahoo! Messenger Version 8. Get it NOW _______________________________________________ LARTC mailing list LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc _______________________________________________ LARTC mailing list LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
Hello All Any Body, Any Thoughts? Any Kind of feedback or suggestion is a welcome... KartheeK KartheeK <kartheekpn@yahoo.co.in> wrote: Hello All, Has Any body of you worked on such a set up? KartheeK KartheeK <kartheekpn@yahoo.co.in> wrote: Date: Thu, 17 Aug 2006 07:31:25 +0100 (BST) From: KartheeK <kartheekpn@yahoo.co.in> To: lartc@mailman.ds9a.nl Subject: [LARTC] Bonding + Shaping --> Is it Possible? Hello All, I was curious to know if I can do traffic shaping on abonded Interface? Ex: I have to interfaces eth1 and eth2 which i have bonded together as bond0 , now the question is can I do shaping on eth1 and eth2 ?? Thanks KartheeK --------------------------------- Here''s a new way to find what you''re looking for - Yahoo! Answers Send FREE SMS to your friend''s mobile from Yahoo! Messenger Version 8. Get it NOW_______________________________________________ LARTC mailing list LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc --------------------------------- Here''s a new way to find what you''re looking for - Yahoo! Answers Send FREE SMS to your friend''s mobile from Yahoo! Messenger Version 8. Get it NOW_______________________________________________ LARTC mailing list LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc _______________________________________________ LARTC mailing list LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc --------------------------------- Here''s a new way to find what you''re looking for - Yahoo! Answers Send FREE SMS to your friend''s mobile from Yahoo! Messenger Version 8. Get it NOW _______________________________________________ LARTC mailing list LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
I tryed to do some iptables rules on bonded interfaces and that didn''t worked. I had to use "ebtables". BTW, what kind of bonding do you use? В Пнд, 21/08/2006 в 13:05 +0100, KartheeK пишет:> Hello All > > Any Body, Any Thoughts? > Any Kind of feedback or suggestion is a welcome... > > KartheeK > > KartheeK <kartheekpn@yahoo.co.in> wrote: > Hello All, > > Has Any body of you worked on such a set up? > > KartheeK > > KartheeK <kartheekpn@yahoo.co.in> wrote: > Date: Thu, 17 Aug 2006 07:31:25 +0100 (BST) > From: KartheeK <kartheekpn@yahoo.co.in> > To: lartc@mailman.ds9a.nl > Subject: [LARTC] Bonding + Shaping --> Is it Possible? > > Hello All, > > I was curious to know if I can do traffic shaping on > abonded Interface? > Ex: I have to interfaces eth1 and eth2 which i have > bonded together as bond0 , now the question is can I > do shaping on eth1 and eth2 ?? > > Thanks > KartheeK > > > ______________________________________________________ > Here''s a new way to find what you''re looking for - > Yahoo! Answers > Send FREE SMS to your friend''s mobile from Yahoo! > Messenger Version 8. Get it > NOW_______________________________________________ > LARTC mailing list > LARTC@mailman.ds9a.nl > http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc > > > > ______________________________________________________________ > Here''s a new way to find what you''re looking for - Yahoo! > Answers > Send FREE SMS to your friend''s mobile from Yahoo! Messenger > Version 8. Get it > NOW_______________________________________________ > LARTC mailing list > LARTC@mailman.ds9a.nl > http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc > _______________________________________________ > LARTC mailing list > LARTC@mailman.ds9a.nl > http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc > > > > > ______________________________________________________________________ > Here''s a new way to find what you''re looking for - Yahoo! Answers > Send FREE SMS to your friend''s mobile from Yahoo! Messenger Version 8. > Get it NOW > _______________________________________________ > LARTC mailing list > LARTC@mailman.ds9a.nl > http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc-- Покотиленко Костик <casper@meteor.dp.ua>
I have bonded two interfaces in mode 0 for load balancing and link sharing. My understanding is that "traffic control" happens, below bonding and hence this should be possible. I am currently short of lab equipments and am planning to try this some time this week end... I am curious about similar implemantations and/or thoughts,,,,,, ðÏËÏÔÉÌÅÎËÏ ëÏÓÔÉË <casper@meteor.dp.ua> wrote: I tryed to do some iptables rules on bonded interfaces and that didn''t worked. I had to use "ebtables". BTW, what kind of bonding do you use? ÷ ðÎÄ, 21/08/2006 × 13:05 +0100, KartheeK ÐÉÛÅÔ:> Hello All > > Any Body, Any Thoughts? > Any Kind of feedback or suggestion is a welcome... > > KartheeK > > KartheeK wrote: > Hello All, > > Has Any body of you worked on such a set up? > > KartheeK > > KartheeK wrote: > Date: Thu, 17 Aug 2006 07:31:25 +0100 (BST) > From: KartheeK > To: lartc@mailman.ds9a.nl > Subject: [LARTC] Bonding + Shaping --> Is it Possible? > > Hello All, > > I was curious to know if I can do traffic shaping on > abonded Interface? > Ex: I have to interfaces eth1 and eth2 which i have > bonded together as bond0 , now the question is can I > do shaping on eth1 and eth2 ?? > > Thanks > KartheeK > > > ______________________________________________________ > Here''s a new way to find what you''re looking for - > Yahoo! Answers > Send FREE SMS to your friend''s mobile from Yahoo! > Messenger Version 8. Get it > NOW_______________________________________________ > LARTC mailing list > LARTC@mailman.ds9a.nl > http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc > > > > ______________________________________________________________ > Here''s a new way to find what you''re looking for - Yahoo! > Answers > Send FREE SMS to your friend''s mobile from Yahoo! Messenger > Version 8. Get it > NOW_______________________________________________ > LARTC mailing list > LARTC@mailman.ds9a.nl > http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc > _______________________________________________ > LARTC mailing list > LARTC@mailman.ds9a.nl > http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc > > > > > ______________________________________________________________________ > Here''s a new way to find what you''re looking for - Yahoo! Answers > Send FREE SMS to your friend''s mobile from Yahoo! Messenger Version 8. > Get it NOW > _______________________________________________ > LARTC mailing list > LARTC@mailman.ds9a.nl > http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc-- ðÏËÏÔÉÌÅÎËÏ ëÏÓÔÉË --------------------------------- Here''s a new way to find what you''re looking for - Yahoo! Answers Send FREE SMS to your friend''s mobile from Yahoo! Messenger Version 8. Get it NOW _______________________________________________ LARTC mailing list LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
So there is no difference between bonded interfaces. I mean that the same traffic goes on both. This case you can make shaping on your bond0 interface. This will work. Well, if the interface that looks to Clients is bond0, and interface that looks to Internet if eth0, then you make shaping of incoming traffic on bond0 and shaping of outgoing traffic on eth0. В Пнд, 21/08/2006 в 17:30 +0100, KartheeK пишет:> I have bonded two interfaces in mode 0 for load balancing and link > sharing. > My understanding is that "traffic control" happens, below bonding and > hence this should be possible. I am currently short of lab equipments > and am planning to try this some time this week end... > I am curious about similar implemantations and/or thoughts,,,,,, > > ðÏËÏÔÉÌÅÎËÏ ëÏÓÔÉË <casper@meteor.dp.ua> wrote: > I tryed to do some iptables rules on bonded interfaces and > that didn''t > worked. I had to use "ebtables". > > BTW, what kind of bonding do you use? > > ÷ ðÎÄ, 21/08/2006 × 13:05 +0100, KartheeK ÐÉÛÅÔ: > > Hello All > > > > Any Body, Any Thoughts? > > Any Kind of feedback or suggestion is a welcome... > > > > KartheeK > > > > KartheeK wrote: > > Hello All, > > > > Has Any body of you worked on such a set up? > > > > KartheeK > > > > KartheeK wrote: > > Date: Thu, 17 Aug 2006 07:31:25 +0100 (BST) > > From: KartheeK > > To: lartc@mailman.ds9a.nl > > Subject: [LARTC] Bonding + Shaping --> Is it Possible? > > > > Hello All, > > > > I was curious to know if I can do traffic shaping on > > abonded Interface? > > Ex: I have to interfaces eth1 and eth2 which i have > > bonded together as bond0 , now the question is can I > > do shaping on eth1 and eth2 ?? > > > > Thanks > > KartheeK > > > > > > ______________________________________________________ > > Here''s a new way to find what you''re looking for - > > Yahoo! Answers > > Send FREE SMS to your friend''s mobile from Yahoo! > > Messenger Version 8. Get it > > NOW_______________________________________________ > > LARTC mailing list > > LARTC@mailman.ds9a.nl > > http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc > > > > > > > > > ______________________________________________________________ > > Here''s a new way to find what you''re looking for - Yahoo! > > Answers > > Send FREE SMS to your friend''s mobile from Yahoo! Messenger > > Version 8. Get it > > NOW_______________________________________________ > > LARTC mailing list > > LARTC@mailman.ds9a.nl > > http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc > > _______________________________________________ > > LARTC mailing list > > LARTC@mailman.ds9a.nl > > http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc > > > > > > > > > > > ______________________________________________________________________ > > Here''s a new way to find what you''re looking for - Yahoo! > Answers > > Send FREE SMS to your friend''s mobile from Yahoo! Messenger > Version 8. > > Get it NOW > > _______________________________________________ > > LARTC mailing list > > LARTC@mailman.ds9a.nl > > http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc > -- > ðÏËÏÔÉÌÅÎËÏ ëÏÓÔÉË > > > > > > ______________________________________________________________________ > Here''s a new way to find what you''re looking for - Yahoo! Answers > Send FREE SMS to your friend''s mobile from Yahoo! Messenger Version 8. > Get it NOW-- Покотиленко Костик <casper@meteor.dp.ua>